Gregory Nutt
|
13010883eb
|
SAMA5 NAND: Do not perform DMA on small transfers
|
2013-12-04 07:41:29 -06:00 |
|
Gregory Nutt
|
2318531d93
|
Condition out most of the recent NXFFS changes for NAND. NXFFS will never be able to support NAND
|
2013-12-03 13:11:11 -06:00 |
|
Gregory Nutt
|
59c4739312
|
SAMA5 DMA: Address of next descriptor in list is a physical address
|
2013-12-03 09:48:13 -06:00 |
|
Gregory Nutt
|
875b49913a
|
SAMA5 NAND: Only CS3 can have NAND
|
2013-12-03 06:59:22 -06:00 |
|
Gregory Nutt
|
d46001a4ba
|
Kconfigs: Fix and issue with SERCOMM_CONSOLE being define in two places
|
2013-12-02 17:21:46 -06:00 |
|
Gregory Nutt
|
006db0be7c
|
SAMA5 NAND: Can't DMA using DMAC1. Add lots of NAND DMA debug instrumentation
|
2013-12-02 17:15:57 -06:00 |
|
Gregory Nutt
|
5f76fe9cb4
|
SAMA5 NAND: Basic NAND access now work (software ECC and no DMA)
|
2013-12-01 18:21:41 -06:00 |
|
Gregory Nutt
|
0c8ffc6d83
|
SAMA5 NAND: Return value should not be ignored
|
2013-12-01 13:39:28 -06:00 |
|
Gregory Nutt
|
360a451268
|
ViewTool STM32F107: Basic NSH checks out okay
|
2013-12-01 10:05:40 -06:00 |
|
Gregory Nutt
|
c50277149f
|
SAMA5 NAND: Fix some race conditions in checking status bits
|
2013-11-30 14:17:32 -06:00 |
|
Gregory Nutt
|
2b3f691fef
|
SAMA5 EHCI: Fix case when interrupt endpoints enabled
|
2013-11-29 16:42:44 -06:00 |
|
Gregory Nutt
|
25f7e45708
|
Make naming consistent for USB host initialiation functions
|
2013-11-29 14:31:44 -06:00 |
|
Gregory Nutt
|
4c7cc446c1
|
LPC31 EHCI: Verified that driver works with keyboard (low-speed, interrupt endpoints)
|
2013-11-29 14:31:42 -06:00 |
|
Gregory Nutt
|
15274c82fc
|
SAMA5 NAND: Don't use HSMC interrupts. They occur to quickly and cause mysterious race conditions
|
2013-11-29 11:52:47 -06:00 |
|
Gregory Nutt
|
a2117320e3
|
LPC31 EHCI: Fixes so that high- and low-speed devices work with the EHCI host
|
2013-11-28 15:13:56 -06:00 |
|
Gregory Nutt
|
de797768cd
|
LPC31 EHCI: Make stream disable a configurable option
|
2013-11-28 13:30:06 -06:00 |
|
Gregory Nutt
|
1ea447867a
|
SAMA5 NAND: Still debugging
|
2013-11-28 12:21:33 -06:00 |
|
Gregory Nutt
|
755ee7f34b
|
STM32 F4: Add support for GPIOK and GPIOJ. From Ken Pettit
|
2013-11-28 08:13:59 -06:00 |
|
Gregory Nutt
|
afb0209207
|
LPC31 EHCI: Seems to work after re-ordering some initialization logic
|
2013-11-27 13:14:23 -06:00 |
|
Gregory Nutt
|
5fb0062d2d
|
SAMA5 NAND: A few bug fixes for integration. Still lots more to do
|
2013-11-27 11:04:40 -06:00 |
|
Gregory Nutt
|
ac275259bd
|
SAMA5 NAND: Fix some DMA related issues
|
2013-11-27 07:37:42 -06:00 |
|
Gregory Nutt
|
014a85af1b
|
SAMA5 DMA: Add an option to disable DMA for debug purposes
|
2013-11-26 06:55:14 -06:00 |
|
Gregory Nutt
|
0c3a0bfd3f
|
SAMA5 NAND: Changes made durint testing (still does not work)
|
2013-11-25 18:38:03 -06:00 |
|
Gregory Nutt
|
4483117a60
|
SAMA5 NAND: Trivial changes
|
2013-11-25 14:16:04 -06:00 |
|
Gregory Nutt
|
2be17cd41f
|
SAMA5 NAND: Fix a few race conditions
|
2013-11-25 13:53:58 -06:00 |
|
Gregory Nutt
|
45a4eba015
|
SAMA5D3x-EK NAND: Integrate SAMA5 NAND support into SAMA5D3x-EK board support
|
2013-11-25 12:10:24 -06:00 |
|
Gregory Nutt
|
20564e8c73
|
SAMA5 PMECC: Code complete
|
2013-11-25 09:04:41 -06:00 |
|
Gregory Nutt
|
0974441b79
|
SAMA5 NAND: Retrofit trim page logic
|
2013-11-24 14:57:30 -06:00 |
|
Gregory Nutt
|
2a103d9f4d
|
SAMA5 PMECC: Ported Gallois tables
|
2013-11-24 12:36:42 -06:00 |
|
Gregory Nutt
|
15f6e382cb
|
SAMA5 NAND: Finish upper part of PMECC logic; add HSMC interrupt handling
|
2013-11-24 11:51:30 -06:00 |
|
Gregory Nutt
|
d1b4f1c466
|
SAMA5 PMECC: More progress, still not complete
|
2013-11-24 09:37:59 -06:00 |
|
Gregory Nutt
|
e844610b98
|
SAMA5 PMECC: A little more
|
2013-11-23 11:26:33 -06:00 |
|
Gregory Nutt
|
f4c6a16c3d
|
SAMA5 PMECC: Some ROM-related interface updates
|
2013-11-23 10:06:33 -06:00 |
|
Gregory Nutt
|
d2ce5423cd
|
Cosmetic changes
|
2013-11-22 13:36:07 -06:00 |
|
Gregory Nutt
|
be8d067a1e
|
SAMA5 NAND: More stuff
|
2013-11-22 11:19:32 -06:00 |
|
Gregory Nutt
|
d46f24cdf8
|
LPC31xx EHCI: Power power changes
|
2013-11-21 18:25:10 -06:00 |
|
Gregory Nutt
|
eba19bef85
|
LPC3131 EHCI: More fixes
|
2013-11-21 16:39:49 -06:00 |
|
Gregory Nutt
|
37591022ca
|
LPC-H3131: SDRAM timing update. Still does not work
|
2013-11-21 14:46:49 -06:00 |
|
Gregory Nutt
|
e93894b53a
|
SAMA5 NAND: More progress
|
2013-11-21 11:13:08 -06:00 |
|
Gregory Nutt
|
22378d66c5
|
lpc31 ECHI. Early debug changes
|
2013-11-20 16:24:10 -06:00 |
|
Gregory Nutt
|
8f0c334d04
|
ARM9: More cache control functions
|
2013-11-20 15:24:14 -06:00 |
|
Gregory Nutt
|
31004d1cf7
|
SAMA5 NAND: Add block erase logic
|
2013-11-20 13:55:23 -06:00 |
|
Gregory Nutt
|
da5670d10b
|
LPC3131 EHCI: Add USB host tracing support
|
2013-11-19 15:48:02 -06:00 |
|
Gregory Nutt
|
448c8572cd
|
Rethinking some NAND interfaces
|
2013-11-19 08:50:12 -06:00 |
|
Gregory Nutt
|
a184224660
|
Add support for the Olimex LPC-H3131 board
|
2013-11-18 14:51:38 -06:00 |
|
Gregory Nutt
|
d8a3f21a47
|
Finishes up NAND software ECC logic
|
2013-11-18 11:42:17 -06:00 |
|
Gregory Nutt
|
3faa880ef1
|
MTD NAND: Beginning of software ECC logic
|
2013-11-18 09:43:44 -06:00 |
|
Gregory Nutt
|
d54832a942
|
More NAND stuff
|
2013-11-17 12:22:09 -06:00 |
|
Gregory Nutt
|
0e7a8668a5
|
Continuing NAND integration
|
2013-11-17 08:56:30 -06:00 |
|
Gregory Nutt
|
03b9f5a8e6
|
More NAND logic (still not complete)
|
2013-11-16 18:26:07 -06:00 |
|
Gregory Nutt
|
d421eb4fd6
|
Futher NAND development
|
2013-11-16 13:19:09 -06:00 |
|
Gregory Nutt
|
7ccbbe07cb
|
Further NAND development
|
2013-11-16 11:46:35 -06:00 |
|
Gregory Nutt
|
c7657c9c5e
|
EA3131: Framework for USB host support
|
2013-11-15 15:56:24 -06:00 |
|
Gregory Nutt
|
897572a552
|
Moved include/nuttx/mtd.h to include/nuttx/mtd/mtd.h
|
2013-11-15 11:22:23 -06:00 |
|
Gregory Nutt
|
121de26583
|
SAMA5 NAND: Basic support for access to NAND FLASH
|
2013-11-15 09:30:05 -06:00 |
|
Gregory Nutt
|
8353d234aa
|
LPC31 EHCI: First cut at an EHCI driver for the LPC31
|
2013-11-14 16:12:22 -06:00 |
|
Gregory Nutt
|
b3faf95a7c
|
LPC31: Configuration and build support for a forthcoming USB host driver; configs/ea3131/nsh converted to use kconfig-frontend tools
|
2013-11-14 15:33:43 -06:00 |
|
Gregory Nutt
|
b9d5acf6e4
|
SAMA5 PCK: Need to configure the programmable clock output pin as well
|
2013-11-14 11:41:59 -06:00 |
|
Gregory Nutt
|
778a41de1b
|
SAMA5 ISI: Framework for ISI drivers. Not much there on initial check-in
|
2013-11-14 11:17:00 -06:00 |
|
Gregory Nutt
|
b7ef5917be
|
SAMA5 PCK: Add support for programmable clock outputs
|
2013-11-14 11:16:04 -06:00 |
|
Gregory Nutt
|
bc58422444
|
STM32 CAN: Options for TSEG1 and TSEG2 quanta missing from Kconfig file
|
2013-11-14 08:29:36 -06:00 |
|
Gregory Nutt
|
8e1abbc561
|
SAMA SSC: Add bufffer dump debug instrumentation
|
2013-11-12 16:22:05 -06:00 |
|
Gregory Nutt
|
dc5d404fb4
|
SAMA5 SSC: Fix DMA data width: 16 not 32 bits
|
2013-11-12 15:53:02 -06:00 |
|
Gregory Nutt
|
a016db8680
|
SAMA5: Fix issues with RX synch
|
2013-11-12 14:56:00 -06:00 |
|
Gregory Nutt
|
26640e6031
|
SAMA5 SSC: With these changes, the TX DMA works. But nothing is received from the loopback
|
2013-11-12 12:19:11 -06:00 |
|
Gregory Nutt
|
6cfca5e9d7
|
SAMA5 SSC: Fix an error in the DMA timeout calculation
|
2013-11-12 10:59:41 -06:00 |
|
Gregory Nutt
|
015da87d6a
|
SAMA4 SSC: Additional DEBUG instrumentation
|
2013-11-12 10:19:52 -06:00 |
|
Gregory Nutt
|
2dec8fbf58
|
Various fixes from initial attempts to integrate the SAMA5 SSC/I2C driver with the I2C character driver loopback test
|
2013-11-11 15:18:57 -06:00 |
|
Gregory Nutt
|
0db55f5b4c
|
STM32F429 LTDC header files and framebuffer driver framework from Ken Pettit
|
2013-11-11 14:05:29 -06:00 |
|
Gregory Nutt
|
3214ff0755
|
SAMA5 I2S Kconfig update
|
2013-11-11 13:50:25 -06:00 |
|
Gregory Nutt
|
6e1523cc45
|
Support for the Atmel SAM4E family. From Mitko
|
2013-11-11 07:45:09 -06:00 |
|
Gregory Nutt
|
1db36fb2f4
|
SAMA5 LCD: More bad color format definitions
|
2013-11-10 16:31:21 -06:00 |
|
Gregory Nutt
|
b552595a3b
|
SAMA5 LCD: Fix some bad color format definitions
|
2013-11-10 16:16:33 -06:00 |
|
Gregory Nutt
|
8c16506277
|
SAMA5 I2S: Need to update the count of valid bytes at the conclusion of the read DMA
|
2013-11-10 15:02:51 -06:00 |
|
Gregory Nutt
|
64a7e96f1f
|
I2S simplifed audio buffer queuing
|
2013-11-10 14:51:33 -06:00 |
|
Gregory Nutt
|
4b998d84a7
|
Small but important typo in the last commit
|
2013-11-10 11:51:50 -06:00 |
|
Gregory Nutt
|
725ef58a19
|
SAMA5 SSC: Add support for loopback mode. Plus unrelated Make.defs file from the last checkin
|
2013-11-10 11:46:45 -06:00 |
|
Gregory Nutt
|
c9d3cdb85e
|
Kinetis KL: PWM driver from Alan Carvalho de Assis
|
2013-11-10 10:34:45 -06:00 |
|
Gregory Nutt
|
f5c82c0df9
|
Add an I2S character driver. This driver is only intended to support I2S testing and is inappropriate for use with real I2S devices
|
2013-11-10 10:24:09 -06:00 |
|
Gregory Nutt
|
4db4c4d770
|
STM32 OTG FS device and host drivers extended so that they can support either the OTG FS peripheral or the OTG HS peripheral (in FS mode). This was done as a quick way to get USB support on the STM32F429 which has only OTG HS. From Ken Pettit
|
2013-11-10 07:23:06 -06:00 |
|
Gregory Nutt
|
2168a6a481
|
SAMA5 I2S: Try to chain as many DMAs together as possible
|
2013-11-09 15:01:18 -06:00 |
|
Gregory Nutt
|
50ec4df77b
|
SAMA5 I2S: Fix compile errors when all debug options enabled
|
2013-11-09 13:46:12 -06:00 |
|
Gregory Nutt
|
ac120d60c3
|
SAMA5 I2S: Driver is code complete, untested and subject to some rethinking
|
2013-11-09 13:08:20 -06:00 |
|
Gregory Nutt
|
abdd0c637c
|
SAMA5 I2S: Improved I2S buffering
|
2013-11-08 16:09:20 -06:00 |
|
Gregory Nutt
|
c7cab0a5ff
|
SAMA5 SSC: Updated I2S driver
|
2013-11-08 12:03:18 -06:00 |
|
Gregory Nutt
|
0516a4d1e9
|
Back out a small part of the recent STM32 usbdev fix. From David Sidrane
|
2013-11-07 19:07:16 -06:00 |
|
Gregory Nutt
|
d8d469fa58
|
STM32 F1 USB: Fix OUT SETUP command bug. From David Sidrane
|
2013-11-07 17:25:05 -06:00 |
|
Gregory Nutt
|
9d653bdfee
|
Support for the STM32F429 from Ken Pettit
|
2013-11-07 16:47:43 -06:00 |
|
Gregory Nutt
|
cdc9bafd54
|
SAMA5 SSC: Mostly cosmetic name changes
|
2013-11-07 16:13:48 -06:00 |
|
Gregory Nutt
|
4214dc9ce9
|
SAMA5 SSC: Add framework (only) for a forthcoming SSC-based I2S driver
|
2013-11-07 12:26:53 -06:00 |
|
Gregory Nutt
|
e231270215
|
SAMA5 PWM: PWM driver is now functional
|
2013-11-07 09:17:46 -06:00 |
|
Gregory Nutt
|
27c8c83b91
|
SAMA5 PWM: Cosmetic changes to debug output
|
2013-11-06 14:46:19 -06:00 |
|
Gregory Nutt
|
3aa348035d
|
SAMA5D3x-EK: Add support board-specific PWM testing
|
2013-11-06 14:38:19 -06:00 |
|
Gregory Nutt
|
b5791ac7a6
|
SAMA5 PWM: Driver now in build and configuration system
|
2013-11-06 12:24:51 -06:00 |
|
Gregory Nutt
|
e73d77c73f
|
SAMA5 PWM: Add first cut at PWM driver
|
2013-11-06 10:55:12 -06:00 |
|
Gregory Nutt
|
7394517bab
|
NSH library: Allow USB trace without a USB console
|
2013-11-06 07:09:00 -06:00 |
|
Gregory Nutt
|
4cb6c0ad80
|
STM32 F1 USB device: Fix handling of EP0 start for large buffers; Add support for decoded USB trace strings. From Davice Sidrane
|
2013-11-05 08:56:06 -06:00 |
|
Gregory Nutt
|
b33123a8f7
|
SAMA5 CAN: Don't enable some many useless error interrupts
|
2013-11-04 11:29:16 -06:00 |
|
Gregory Nutt
|
b9130ff601
|
SAMA5 CAN: Fix a data alignment problem
|
2013-11-03 10:41:24 -06:00 |
|
Gregory Nutt
|
ad791dd275
|
Fixing typos from previous check-ins. Also, missed the ARMv7 IDLE stack coloration
|
2013-11-01 16:06:43 -06:00 |
|
Gregory Nutt
|
3f81d6f0b3
|
Port IDLE/interrupt stack coloration to ARM and ARMv7-A architectures
|
2013-11-01 15:30:18 -06:00 |
|
Gregory Nutt
|
f8b3dbaa61
|
Extend stack debug logic to include IDLE and interrupt stacks. Also color the heap as well. Based on suggestions from David Sidrane
|
2013-11-01 11:16:51 -06:00 |
|
Gregory Nutt
|
532d4c7cbe
|
arch/arm/src/stm32/stm32_usbdev.c: On a failure to bind the class driver, the driver reference was being nullified too soon. This caused an exception in usbdev_reset() later. The driver reference will be null
ified later usbdev_unregister when the caller gets the error. From David Sidrane
|
2013-10-31 15:27:52 -06:00 |
|
Gregory Nutt
|
aebeb50a91
|
SAMA5 PWM register definition header file
|
2013-10-31 10:33:43 -06:00 |
|
Gregory Nutt
|
37d8faff37
|
SAMA5 SSC: Add SSC register definition header file
|
2013-10-30 16:15:51 -06:00 |
|
Gregory Nutt
|
d9f16bba82
|
apps/platform: A new now for platform-specific applicatin code
|
2013-10-30 09:04:37 -06:00 |
|
Gregory Nutt
|
1d5b786fa2
|
Minor changes while pondering a camera interface
|
2013-10-29 16:57:06 -06:00 |
|
Gregory Nutt
|
3fd4629bd7
|
SAMA5 ADC: Seems functional in all modes including DMA
|
2013-10-28 10:08:12 -06:00 |
|
Gregory Nutt
|
1027d9f751
|
STM32 SPI DMA: Fix related to CONFIG_STM32_DMACAPABLE from Ken Pettit
|
2013-10-27 16:23:44 -06:00 |
|
Gregory Nutt
|
da251ade8b
|
SAMA5 ADC: If DMA is enabled, then you should be able to configuration larger DMA transfers
|
2013-10-27 12:04:37 -06:00 |
|
Gregory Nutt
|
d04952385f
|
SAMA5 ADC: Fix sample frequency scaling and sequencer setup
|
2013-10-27 10:29:07 -06:00 |
|
Gregory Nutt
|
509f08daa9
|
SAMA5 ADC: Correct setup of time compare registers
|
2013-10-27 09:35:30 -06:00 |
|
Gregory Nutt
|
c534eb262e
|
SAM3/4 serial: Same supersitituous change as for SAMA5
|
2013-10-26 16:17:07 -06:00 |
|
Gregory Nutt
|
ba6fe788ea
|
SAMA5 serial: Restore logic to minimize TX interrupts. Oddly, seems to improve ADC stability
|
2013-10-26 16:02:07 -06:00 |
|
Gregory Nutt
|
0ab6d8382f
|
SAMA5 TC: Debug instrumentation
|
2013-10-26 14:03:30 -06:00 |
|
Gregory Nutt
|
ff682d5292
|
SAMA5: Register definition file for camera interface
|
2013-10-26 08:25:58 -06:00 |
|
Gregory Nutt
|
2226a44b2a
|
arch/arm/src/sama5/sam_adc.c: Remove a warning
|
2013-10-25 15:18:32 -06:00 |
|
Gregory Nutt
|
f39467339e
|
Add ioctl to support software triggering of ADC/DAC conversions
|
2013-10-25 14:19:09 -06:00 |
|
Gregory Nutt
|
b3afc8bd75
|
sam_tc.c: Fix a timer initialization bug
|
2013-10-25 10:05:00 -06:00 |
|
Gregory Nutt
|
4647775ed2
|
SAMA5 ADC+TC: Several updates/fixes from ongoing debug
|
2013-10-25 08:46:57 -06:00 |
|
Gregory Nutt
|
1668aa408e
|
SAMA5 ADC+TC: Early debug fixes + lots of new debug instrumentation
|
2013-10-24 16:50:51 -06:00 |
|
Gregory Nutt
|
28d50790f2
|
SAMA5D3x-EK: Add support for app/examples/adc
|
2013-10-24 15:39:56 -06:00 |
|
Gregory Nutt
|
da7a3d9c9a
|
SAMA5: Add ADC-side of the logic to hook in timer/counter logic needed to drive periodic ADC sampling
|
2013-10-24 13:56:23 -06:00 |
|
Gregory Nutt
|
aab5b6b2d9
|
SAMA5: Hook in timer/counter logic so that it can driver periodic ADC sampling
|
2013-10-24 12:35:42 -06:00 |
|
Gregory Nutt
|
ec84f19454
|
STM32 PWM and ADC: Add some bits that should have been cleared. From Martin Lederhilger
|
2013-10-24 08:27:09 -06:00 |
|
Gregory Nutt
|
f10069907a
|
Add support for the STM32F207ZE chip. From Martin Lederhilger
|
2013-10-24 08:25:05 -06:00 |
|
Gregory Nutt
|
e5b093cd3a
|
Remove carriage returns from SAMA5 TC files just commited
|
2013-10-23 15:39:00 -06:00 |
|
Gregory Nutt
|
f6f2d2b961
|
SAMA5 Timer/counter library
|
2013-10-23 14:53:37 -06:00 |
|
Gregory Nutt
|
fe0f5ce44b
|
STM32 F1 DAM fix from David Sidrane
|
2013-10-23 14:05:26 -06:00 |
|
Gregory Nutt
|
69e49938f0
|
SAMA5 CAN: Update readme on how to configure CAN
|
2013-10-23 11:32:12 -06:00 |
|
Gregory Nutt
|
e019782db5
|
Update Changelog
|
2013-10-23 09:13:28 -06:00 |
|
Gregory Nutt
|
e5c2496d6a
|
SAMA5 CAN: Driver is now code complete but still untested
|
2013-10-22 15:47:52 -06:00 |
|
Gregory Nutt
|
f5674c21fa
|
SAMA5: Beginning of a CAN driver
|
2013-10-21 15:52:23 -06:00 |
|
Gregory Nutt
|
781119c0e6
|
SAMA5 CAN: Add register definition file
|
2013-10-21 12:22:27 -06:00 |
|
Gregory Nutt
|
ba1ea91e37
|
SAMA5 TC: Add timer/counter register definition file
|
2013-10-20 14:47:02 -06:00 |
|
Gregory Nutt
|
dbeee18171
|
SAMA5 TRNG: /dev/random appears to be functional
|
2013-10-20 12:08:39 -06:00 |
|
Gregory Nutt
|
0ebdbfbc88
|
SAMA5 TRNG: Add a /dev/random driver based on the SAMA5D3 TRNG peripheral
|
2013-10-20 11:38:31 -06:00 |
|
Gregory Nutt
|
891c463381
|
SAMA5 WDT driver is now functional
|
2013-10-20 09:24:30 -06:00 |
|
Gregory Nutt
|
cc4c4f4593
|
SAMA5 WDT: Miss watchdog fixes
|
2013-10-20 08:24:05 -06:00 |
|
Gregory Nutt
|
6ee8857f9b
|
SAMA5: Initial WDT timer (untested)
|
2013-10-19 12:26:47 -06:00 |
|
Gregory Nutt
|
8954161288
|
SAMA5: Hook RTC into build system; Finish RTC alarm logic; Verify correct behavior of the basic RTC functionality
|
2013-10-19 10:41:20 -06:00 |
|
Gregory Nutt
|
a1df31266c
|
SAMA5: Add GPBR register definitions
|
2013-10-19 10:22:21 -06:00 |
|
Gregory Nutt
|
b05bf917b8
|
SAMA5 RTC: Beginning of an RTC driver for the SAMA5
|
2013-10-18 16:56:46 -06:00 |
|
Gregory Nutt
|
2137ef96c0
|
SAMA5: Add RTC and WDT register definition header files
|
2013-10-18 14:47:50 -06:00 |
|
Gregory Nutt
|
aa51df493a
|
STM32 DMA Priority: Select the correct default for F1 and other family members
|
2013-10-18 14:13:53 -06:00 |
|
Gregory Nutt
|
d72a99bc64
|
SAMA5 LCD: Move framebuffers to center of free memory region. That creates a guard band around the framebuffers that gives a little protection from any bad writes into the framebuffer
|
2013-10-18 10:11:20 -06:00 |
|
Gregory Nutt
|
46bf97abfc
|
Add SDIO preflight method
|
2013-10-18 08:15:09 -06:00 |
|
Gregory Nutt
|
944e0fe81d
|
Changes to stm32_dmacapable interfaces from Mike Smith
|
2013-10-18 08:06:23 -06:00 |
|
Gregory Nutt
|
973d11f625
|
STM32 DMA priority corrections from Mike Smith
|
2013-10-18 07:37:24 -06:00 |
|
Gregory Nutt
|
2b70abad0d
|
Typo fixes for UART7 and UART8 DMA configs. From Mike Smith
|
2013-10-18 07:17:55 -06:00 |
|
Gregory Nutt
|
1143b537c2
|
SAMA5 TSD: Fix to prohibit reading samples when not valid
|
2013-10-17 17:26:06 -06:00 |
|
Gregory Nutt
|
d71289dd43
|
STM32 F103C: Correct some errors in pinmapping. From David Sidrane
|
2013-10-16 07:26:41 -06:00 |
|
Gregory Nutt
|
87d8d3a7d5
|
Misc changes to README files; Update SAMA5D3x-EK NxWM configuration to use Calibration instruction messages
|
2013-10-14 14:53:38 -06:00 |
|
Gregory Nutt
|
fa71c8211c
|
SAMA5 LCDC: Correct how framebuffer memory was being mapped; Remove options to get framebuffer memory in various. Because of the mapping and aligment requirements, those options really cannot be supported
|
2013-10-13 13:08:05 -06:00 |
|
Gregory Nutt
|
3cfe4c2113
|
SAMA5 LCDC: Move framebuffer to lower memory; I suspect some corruption by interference
|
2013-10-13 10:42:14 -06:00 |
|
Gregory Nutt
|
02f7c5d8d5
|
SAMA5 LCDC: Fixed backlight PWM divider. Backlight no longer flashes
|
2013-10-11 17:12:35 -06:00 |
|
Gregory Nutt
|
e9187d3199
|
SAMA5 LCDC: Wait when the LCDC is resynchronizing (SIF); Try start-up parameters from Barebox (this still don't work)
|
2013-10-10 18:44:08 -06:00 |
|
Gregory Nutt
|
de5ae1a584
|
SAMA5 LCDC: Default resolution if now RGB565; Add option to select a different output resolution than the sofware resolution (needs to the 24BPP for this LCD).
|
2013-10-10 18:41:42 -06:00 |
|
Gregory Nutt
|
b641545f93
|
SAMA5 LCDC: Move DMA descriptors out of internal SRAM and into SDRAM. I am not completely clear, but it looks like the LCDC cannot support DMA from internal SRAM
|
2013-10-10 12:02:41 -06:00 |
|
Gregory Nutt
|
0a81f51502
|
SAMA5: Allow portions of external memory to be added to the heap instead of the whole thing
|
2013-10-10 12:00:32 -06:00 |
|
Gregory Nutt
|
8ae85daf3d
|
SAMA5 LCDC: Fix a few compilation errors that show up when additional layers are enabled
|
2013-10-09 18:46:05 -06:00 |
|
Gregory Nutt
|
03ebf1cf4a
|
SAMA5 LCDC: Few more bug fixes but still not working
|
2013-10-09 18:22:21 -06:00 |
|
Gregory Nutt
|
ff64ccb539
|
SAMA5 LCDC: Corrections from first debug sessions. Still a way to go
|
2013-10-09 13:21:27 -06:00 |
|
Gregory Nutt
|
f8397f8238
|
SAMA5: LCDC driver incorporated into the build system.
|
2013-10-08 15:30:38 -06:00 |
|
Gregory Nutt
|
1807a662a8
|
SAMA5: LCD driver is code complete but untested
|
2013-10-08 12:16:30 -06:00 |
|
Gregory Nutt
|
0907691978
|
SAMA5: More LCDC driver progress
|
2013-10-08 08:57:48 -06:00 |
|
Gregory Nutt
|
8238ea7477
|
SAMA5: More LCDC driver progress
|
2013-10-07 15:54:08 -06:00 |
|
Gregory Nutt
|
ed980b51f7
|
SAMA5: LCDC driver progress
|
2013-10-07 12:05:16 -06:00 |
|
Gregory Nutt
|
d3fa588250
|
SAMA5 LCDC: Add 'skeleton' files that will eventually become an LCDC driver for the SAMA5
|
2013-10-06 09:08:52 -06:00 |
|
Gregory Nutt
|
3325c192f5
|
SAMA5: Completes LDCDC register definition file
|
2013-10-04 15:43:19 -06:00 |
|
Gregory Nutt
|
d7426cd34d
|
SAMA5: Add LCD register definition header file
|
2013-10-04 10:11:12 -06:00 |
|
Gregory Nutt
|
a8951de086
|
SAMA5: Touchscreen driver now works
|
2013-10-04 08:03:38 -06:00 |
|
Gregory Nutt
|
6ca0850605
|
SAMA5: First changes from touchscreen debug
|
2013-10-03 17:11:30 -06:00 |
|
Gregory Nutt
|
9d6bfb5238
|
SAMA5: ADC and touchscreen drivers now build without errors
|
2013-10-03 14:32:21 -06:00 |
|
Gregory Nutt
|
a4123ed6d5
|
SAMA5: Integrate touchscreen and ADC drivers into the build
|
2013-10-03 12:49:13 -06:00 |
|
Gregory Nutt
|
6c8d7f2184
|
SAMA5 ADC and touchscreen: Drivers are code complete and ready for test
|
2013-10-03 10:06:14 -06:00 |
|
Gregory Nutt
|
97a4ecb306
|
SAMA Touchscreen/ADC: More progress
|
2013-10-02 16:55:22 -06:00 |
|
Gregory Nutt
|
fee65851ca
|
Add framework for Spark Core board support. The initial commit is a clone of the Maple Mini and still needs Spark customizations
|
2013-10-02 08:24:46 -06:00 |
|
Gregory Nutt
|
e92ed407aa
|
SAMA5 ADC/Touchscreen: A little more logic
|
2013-10-01 14:40:34 -06:00 |
|
Gregory Nutt
|
efb1695c0c
|
KL: Now builds up_puts
|
2013-10-01 11:51:27 -06:00 |
|
Gregory Nutt
|
9a634c882d
|
KL: Missing header file in low level getc logic
|
2013-10-01 11:25:01 -06:00 |
|
Gregory Nutt
|
a737c93ea2
|
SAMA5 touchscreen and ADC: A little more progress
|
2013-10-01 11:23:24 -06:00 |
|
Gregory Nutt
|
4cecf0b618
|
SAMA5 ADC/Touchscreen: A little more progress. Still not complete
|
2013-09-30 14:28:42 -06:00 |
|
Gregory Nutt
|
50123bd30f
|
Add freedom-kl25z/minnsh configuration: This is an experiment to see just how small we and get an NSH configuration. From Alan Carvalho de Assis.
|
2013-09-30 09:20:11 -06:00 |
|
Gregory Nutt
|
0a1a68b77a
|
KL25Z: Add low-level up_lowgetc function that can be used to provide an NSH console when the file system (and hence the serial driver) is disabled. From Alan Carvalho de Assis
|
2013-09-30 09:15:31 -06:00 |
|
Gregory Nutt
|
3e09f94985
|
KL25Z: Add low-level up_lowgetc function that can be used to provide an NSH console when the file system (and hence the serial driver) is disabled. From Alan Carvalho de Assis
|
2013-09-30 09:11:54 -06:00 |
|
Gregory Nutt
|
744f3776b7
|
SAMA5: Framework for an touchscreen driver (incomplete)
|
2013-09-30 09:04:21 -06:00 |
|
Gregory Nutt
|
ecd7502c34
|
SAMA5 ADC: Framework for an ADC driver (incomplete)
|
2013-09-30 07:22:34 -06:00 |
|
Gregory Nutt
|
0e02d2b7b4
|
SAMA5 ADC: Beginning ADC register definition file
|
2013-09-29 18:34:09 -06:00 |
|
Gregory Nutt
|
54b1275de9
|
Work around a start-up error in the GMAC that I still do not understand
|
2013-09-29 16:46:22 -06:00 |
|
Gregory Nutt
|
7ee6ded1c2
|
SAMA5 GMAC: Various fixes from initial debug
|
2013-09-29 15:03:57 -06:00 |
|
Gregory Nutt
|
c038f4efe0
|
Dependency generation fix for directories that keep object files in a sub-directory
|
2013-09-29 11:46:10 -06:00 |
|
Gregory Nutt
|
417f67c132
|
Clean up some naming: fd vs. fildes vs. filedes and filep vs filp
|
2013-09-28 16:50:07 -06:00 |
|
Gregory Nutt
|
7b9b7cbdec
|
configs/compal_e88 converted to use the kconfig-frontends tools
|
2013-09-27 16:12:44 -06:00 |
|
Gregory Nutt
|
f7e4f25760
|
SAMA5 GMAC and GMII support is code complete and ready for test
|
2013-09-27 13:12:04 -06:00 |
|
Gregory Nutt
|
cdb56b81b8
|
Networking: Fix backward conditional in test to see if address is in ARP table. From Max Holtzberg
|
2013-09-27 08:27:35 -06:00 |
|
Gregory Nutt
|
e4af9572d0
|
Beginng of support for GMII/RGMII PHYs
|
2013-09-26 15:55:21 -06:00 |
|
Gregory Nutt
|
d417ff6460
|
SAMA5 GMAC: Initial driver check-in is just the EMAC driver forced to compile with the GMAC register definitions
|
2013-09-26 10:35:52 -06:00 |
|
Gregory Nutt
|
3c4f9926c9
|
SAMA5: Completes GMAC register definition header file
|
2013-09-26 09:13:14 -06:00 |
|
Gregory Nutt
|
bbccd73dd0
|
SAMA5 EMAC: Need to pace RX and TX because and RX can result in a TX; Process TX interrupt events before TX interrupt events for the same reason
|
2013-09-25 14:22:35 -06:00 |
|