Gregory Nutt
a42813c756
PIC32MZ: Fix some PLL setup logic
2015-02-23 17:27:28 -06:00
Gregory Nutt
40da362b4b
PIC32MZ: Fix an error in the branch target of the hard-coded power up reset branch
2015-02-23 17:09:57 -06:00
Gregory Nutt
87f893887d
PIC32MZ: Most related to start up file a FLASH device configuration setup
2015-02-23 16:36:35 -06:00
Gregory Nutt
9432a01645
PIC32MZ: Make sure that the microMIPS ISA is selected on all common MIPS32 assembly files when the PIC21MZ is selected
2015-02-23 12:09:34 -06:00
Gregory Nutt
e575921d93
PIC32MZ: Resolve a PIC32 dependency in the generic MIPS32 code
2015-02-23 11:56:16 -06:00
Gregory Nutt
d787972121
Finishes PIC32MZ device configuration definitions
2015-02-23 09:58:34 -06:00
Gregory Nutt
e2f693369a
PIC32MZ: Add memorymap and devcfg header files
2015-02-22 16:21:12 -06:00
Gregory Nutt
4cf0188a39
PIC32MZ: Framework for startup function. Still has too much PIC32MX garbage in it to be credible
2015-02-22 14:30:53 -06:00
Gregory Nutt
2d0589a3cd
MIPS: Add some build support for the M14K and also for the PIC32MZ Starter Kit. Still a long way to go
2015-02-22 13:45:59 -06:00
Gregory Nutt
5fd0de547b
Remove support for obsolete PIC32 toolchain configuration names
2015-02-22 12:14:20 -06:00
Gregory Nutt
13926ce019
PIC32MZ: Add just enough PIC32MZ logic that we can run 'make menuconfig'
2015-02-22 10:53:24 -06:00
Gregory Nutt
f73d4c106f
Fix a typo that prevents building PIC32... How long has that been there?
2015-02-21 19:41:59 -06:00
Gregory Nutt
068bb36a6d
Current Pinguino toolchain uses prefix p32 instead of mips
2015-02-21 19:41:26 -06:00
Gregory Nutt
3465cb6138
SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville.
2015-02-08 06:53:24 -06:00
Gregory Nutt
7e46e94546
Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless
2015-01-24 06:49:51 -06:00
Gregory Nutt
32d2a4c548
All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called
2015-01-21 11:36:33 -06:00
Gregory Nutt
1ad73c52b1
Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address.
2015-01-20 15:52:25 -06:00
Gregory Nutt
a53ae59284
Networking: Add missing raw/packet socket support to all Ethernet drivers
2015-01-20 15:14:29 -06:00
Gregory Nutt
92f440c20c
Ethernet drivers: Use IFF_IS_IPv4 macro. Cannot rely on the EtherType being set correctly.
2015-01-20 06:26:14 -06:00
Gregory Nutt
278c485229
Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received
2015-01-15 09:31:23 -06:00
Gregory Nutt
89538ac4a2
- Rename devif_input() ipv4_input()
...
- Copy net/devif/devif_input.c to ipv6_input.c. Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c. Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
2015-01-15 08:03:56 -06:00
Gregory Nutt
2f4aa0bde7
Networking: Condition certain ARP logic on CONFIG_NET_ARP in all Ethernet drivers
2015-01-15 07:07:39 -06:00
Gregory Nutt
63526fb1ef
Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all MCU Ethernet drivers
2014-11-16 08:10:06 -06:00
Gregory Nutt
388ef8db1a
Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday
2014-11-15 08:22:51 -06:00
Gregory Nutt
6c9f325e1e
Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS
2014-10-27 11:31:16 -06:00
Gregory Nutt
4929b61f7c
For PIC32MX7, DEVCFG0 bit 2 must be set
2014-10-09 14:03:54 -06:00
Gregory Nutt
7b310711a1
Update everything under nuttx/arch to use the corrected syslog interfaces
2014-10-08 12:48:47 -06:00
Gregory Nutt
56dc80cf59
The 'make export' target needs to bundle up the user C startup file (crt0), not the kernel head object
2014-09-04 13:31:34 -06:00
Gregory Nutt
64ab35b399
There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing.
2014-09-01 15:39:34 -06:00
Gregory Nutt
205260d5e2
Reanem kzalloc to kmm_zalloc for consistency
2014-08-31 17:34:44 -06:00
Gregory Nutt
1780810d3d
Rename kmalloc to kmm_malloc for consistency
2014-08-31 17:26:36 -06:00
Gregory Nutt
54fa3b0b59
Rename kfree to kmm_free for consistency with other naming conventions
2014-08-31 17:04:02 -06:00
Gregory Nutt
9aca0c1c84
Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming
2014-08-31 16:24:24 -06:00
Gregory Nutt
e3ff0689bb
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
2014-08-29 14:47:22 -06:00
Gregory Nutt
45f3328247
Fix an error introduced into ALL implmentations of interrupt dispatch logic
2014-08-28 08:41:57 -06:00
Gregory Nutt
dfdaeb31ac
Add address environment support to ALL implementatins of up_release_pending()
2014-08-28 08:10:19 -06:00
Gregory Nutt
9598412386
Add address environment support to ALL implementatins of up_reprioritize_rtr()
2014-08-28 07:54:07 -06:00
Gregory Nutt
7420468daa
MIPS: Move address environment switch from the task switchers to the interrupt handler. That may save doing the action multiple times per interrupt
2014-08-28 07:16:14 -06:00
Gregory Nutt
9bc9d2d86d
Add ADDRENV support to ALL implmentations of _exit()
2014-08-27 16:31:02 -06:00
Gregory Nutt
4d24c48901
Add ADDRENV support to ALL implementations of up_unblock_task()
2014-08-27 16:15:46 -06:00
Gregory Nutt
57c066b7a3
Add ADDRENV support to all implementations of up_block_task()
2014-08-27 15:36:52 -06:00
Gregory Nutt
ad9b3f8ab8
wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide.
2014-08-21 11:16:55 -06:00
Gregory Nutt
e1769b22f1
Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures
2014-08-08 18:39:28 -06:00
Gregory Nutt
d798dd37a7
Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h
2014-08-08 17:53:55 -06:00
Gregory Nutt
23a334c066
Move task control files from sched/ to sched/task
2014-08-08 16:44:08 -06:00
Gregory Nutt
d4b56eb3cc
Move clock functions from sched/ to sched/clock
2014-08-08 14:43:02 -06:00
Gregory Nutt
c9661ad5a7
Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors
2014-08-07 18:00:38 -06:00
Gregory Nutt
736d3c169a
Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined.
2014-08-06 16:26:01 -06:00
Gregory Nutt
60246e613b
NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed.
2014-07-04 19:13:08 -06:00
Gregory Nutt
0bb153b8cb
Remove all inclusion of uip.h
2014-07-04 16:58:22 -06:00