In the past, header file paths were generated by the incdir command
Now they are generated by concatenating environment variables
In this way, when executing makefile, no shell command will be executed,
it will improve the speed of executing makfile
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
1.Don't check the return value of nxsem_init or nxmutex_init
2.Fix some style issue
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
since rwbuffer isn't fully initiailized in mmcsd_slotinitialize.
BTW, if the cache is important for performance, it is better to
implement a general block cache and put in a common location.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
This change makes it so that the timeout is set as part of the SDIO_WAITENABLE call instead of the SDIO_EVENTWAIT call. By doing so, you eliminate all opportunity for a race condition.
stm32h7:sdmmc Check if busy ended early
mmcsd:Remove CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
stm32h7:sdmmc remove CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
stm32f7:sdmmc remove CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
stm32f7:sdmmc WRITE COMPLETE prevent false triggers
stm32h7:sdmmc WRITE COMPLETE prevent false triggers
While testing PR #2989 on the H7 I noticed that the cards
were staying in 1-bit mode. The root cause was that the
scr read path was using DMA without an invlidate.
This was caused by CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT,
but the sdmmc driver, did not use the delayed invalidate
nor would it work on 8 bytes.
The driver fully supported dcache mgt on runt buffers, but
the #ifdef CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT blocked it.
Reviewing the PR that added CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
it may have been valid at the time. But after the dcache operations
we fixed. It is not necessary and offers no benefit.
This change reflects that the geometry isn't related to the largest
allocatable unit on the platform.
Calls to read and write block devices are also affected and have
been updated.
The Multiblock write path was missing the
the SDIO_WAITENABLE with SDIOWAIT_WRCOMPLETE.
This could be seen with debugging turned on as
mmcsd_eventwait: ERROR: Awakened with 10
mmcsd_transferready: ERROR: mmcsd_eventwait for transfer ready failed: -5
When CONFIG_MMCSD_MULTIBLOCK_DISABLE is lit, all SD
read/write failed. The function return the number of
blocks in `ret`, set on entry to nsectors. That was
then wiped out by using the ret for the mmcsd_takesem.
Since the code had many path setting return, the choices for
the fix could have been add a new varaible or simple init it
were used. I choose the latter.
- Add missing cancel process when the send command fails
- Make it possible to recover from SD initialization error
- Reduce time in changing transfer mode to 5msec from 500msec.
Replace usleep function instead of up_udelay in other to avoid
blocking other tasks from working.
