This adds NuttSBI support for rv-virt device so that to enable CI
checks for NuttSBI later. It allows using `-bios nuttx` option to
run NuttX with QEMU v6.2 w/o OpenSBI.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This adjusts sbi_start behavior so that if SBI late initialization hook
is defined, PMP setting is assumed to be fully done in the hook, because
the default PMP operation may fail for various reasons such as lacking
free entries or the default setting doesn't work on devices like QEMU
v6.2.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
These symbols only used in esp_spi.c and too simple
to conflict with others, so mark them as static:
- cfg
- ctx
- dev_cfg
- timing_param
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Fixes regression from https://github.com/apache/nuttx/pull/12220
Error: chip/k230_start.c:80:13: error: 'k230_copy_init_data' defined but not used [-Werror=unused-function]
80 | static void k230_copy_init_data(void)
| ^~~~~~~~~~~~~~~~~~~
HPET can be used as system clock for x86_64
to set HPET as system clock you have to enable:
CONFIG_ONESHOT=y
CONFIG_ALARM_ARCH=y
CONFIG_INTEL64_ONESHOT=y
CONFIG_ARCH_INTEL64_HPET_ALARM=y
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
Other ESP32-S3 modules (with embedded flash and PSRAM) were added.
Also, the `help` section of the Kconfig was updated to better
describe the modules' flash and PSRAM sizes.
Steppoint can be implemented by icount(instruction count)
from RISC-V debug extension, but it may not implemented in all RISC-V cores.
Unfortunately, the currently supported RISC-V cores do not implement it.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Provide `up_copy_section` function that enables copying data using
the data bus. If the memory destination address is accessible
through the instruction bus, the data is copied using the
correspondent address accessible through the data bus.
rename _rdtsc macro to rdtsc to avoid conflict with external code
rename rdtsc macro to rdtscp to be the same as asm instruction used
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
The buffer initialization function (`i2s_buf_initialize`) calls
`i2s_buf_free`, which performs buffer initialization within a
critical section (`spin_lock_irqsave`). If this function is called
under the same critical section (same spinlock), initialization
will hang.
This change implements a driver for the two watchdog timers on the BL808, and enables it as part of the timer config. The driver is based on the GP timer driver.
arch/xtensa: add support for capture driver on ESP32 and ESP32|S3|
Squashed:
Initial settings for MCPWM Capture on board level
Created lower half files - compilation ok
Using capture debug features. Simple example on fops works
Successful duty and freq calculation
Documentation update
Fixed and added interupt capabilities for all 3 capture channels
Cleaned defconfig
Renamed macros, added S3 options and moved arch source to common dir
Added support for ESP32S3
Added capture example to defconfig and renamed
Basic bring up ready. New Kconfig options for motor.
Good motor registration
Working on enabling pwm generators
Working on enabling pwm generators
Added fops functions
Success on PWM 50%
stable pwm operation for bdc
Added loopback option for testing
Improved rules on fsm
Working motor direction control
Testing new ISR for fault handling
Issues on fault ISR
Removed fault implementation (not working)
Added support for esp32s3
Documentation improvements
Added default motor spin direction
Added parameter change while running
Review fixes
arch/xtensa: add support for fault signal on motor control
Squashed:
Initial settings for MCPWM Capture on board level
Created lower half files - compilation ok
Using capture debug features. Simple example on fops works
Successful duty and freq calculation
Documentation update
Fixed and added interupt capabilities for all 3 capture channels
Cleaned defconfig
Renamed macros, added S3 options and moved arch source to common dir
Added support for ESP32S3
Added capture example to defconfig and renamed
Basic bring up ready. New Kconfig options for motor.
Good motor registration
Working on enabling pwm generators
Working on enabling pwm generators
Added fops functions
Success on PWM 50%
stable pwm operation for bdc
Added loopback option for testing
Improved rules on fsm
Working motor direction control
Testing new ISR for fault handling
Issues on fault ISR
Removed fault implementation (not working)
Added support for esp32s3
Documentation improvements
Added default motor spin direction
Added parameter change while running
Got responsive fault indicator
Working brakes - still need to work on starting isr
Fixed single-time ISR initializiation
Working soft brake on fault
Improved KConfig for BDC and BLDC
Kconfig fixed at board level
when the thread to backtrace is exiting, get_tcb and up_backtrace in
different critical section may cause try to dump invalid pointer, have
to ensure the nxsched_get_tcb and up_backtrace inside same critical
section procedure.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
This fixes the always zero time in NuttSBI case as the `error` field
contains the correct timestamp. This in turn also fixes the block of
`up_udelay()` which further leads to boot failure of `canmv230:master`
config.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Correctly releasing channels after using QSPI is crucial
to prevent issues caused by multiple requests that may lead
to DMA channel resource conflicts.
The common `up_allocate_heap` is a strong symbol, which leads to
error when building with CONFIG_DEBUG_LINK_WHOLE_ARCHIVE. Make
`up_allocate_heap` weak function to mitigate this problem.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
This PR configures the BL808 and SG2000 MMU (inside T-Head C906) to cache the the Kernel Text, Data and Heap. We set the MMU Flags (Shareable, Bufferable and Cacheable) as explained in this article: https://lupyuen.github.io/articles/plic3#appendix-mmu-caching-for-t-head-c906
This PR fixes the Slow Memory Access for NuttX Kernel in BL808 and SG2000: https://github.com/apache/nuttx/issues/12696
In the next PR, we will fix the Slow Memory Access for NuttX Apps, by caching the User Text and Data.
arch/risc-v/src/bl808/bl808_mm_init.c: Added MMU Flags (Shareable, Bufferable and Cacheable) for BL808 Kernel Text, Data and Heap
arch/risc-v/src/sg2000/sg2000_mm_init.c: Added MMU Flags (Shareable, Bufferable and Cacheable) for SG2000 Kernel Text, Data and Heap
This fixes stack pointer restore logic to avoid parent stack corruption
by forked child in PROTECTED build.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This fixes `tp` value of forked child in PROTECTED build to support
vfork. Why? the optimized `dispatch_syscall` requires `tp` to hold
the task TCB since commit e6973c764c.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
tc3xx/tc3xx_timerisr.c: In function ‘up_timer_initialize’:
tc3xx/tc3xx_timerisr.c:58:39: warning: passing argument 1 of ‘tricore_systimer_initialize’ discards ‘volatile’ qualifier from pointer target type [-Wdiscarded-qualifiers]
58 | lower = tricore_systimer_initialize(&MODULE_STM0, 192, SCU_FREQUENCY);
In file included from tc3xx/tc3xx_timerisr.c:31:
nuttx/arch/tricore/src/common/tricore_internal.h:252:35: note: expected ‘void *’ but argument is of type ‘volatile Ifx_STM *’ {aka ‘volatile struct _Ifx_STM *’}
252 | tricore_systimer_initialize(void *tbase, int irq, uint64_t freq);
| ~~~~~~^~~~~
tc3xx/tc3xx_serial.c:177:16: warning: initialization discards ‘volatile’ qualifier from pointer target type [-Wdiscarded-qualifiers]
177 | .uartbase = &MODULE_ASCLIN0,
| ^
tc3xx/tc3xx_serial.c:178:16: warning: initialization discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
178 | .pins = &g_uart0_pins,
| ^
common/tricore_trapcall.c: In function ‘tricore_trapcall’:
common/tricore_trapcall.c:66:3: warning: passing argument 4 of ‘_assert’ discards ‘volatile’ qualifier from pointer target type [-Wdiscarded-qualifiers]
66 | PANIC_WITH_REGS("Trap", CURRENT_REGS);
| ^~~~~~~~~~~~~~~
In file included from common/tricore_trapcall.c:29:
nuttx/include/assert.h:189:45: note: expected ‘void *’ but argument is of type ‘volatile uintptr_t *’ {aka ‘volatile long unsigned int *’}
189 | FAR const char *msg, FAR void *regs);
Signed-off-by: chao an <anchao@lixiang.com>
