Also, convert the type to union; we don't need the list element once
the item has been popped from the free list (the linkage is never needed
when the item is in use).
This provides an alternate tickless scheduling method, which uses the riscv
mtimer as a timebase, allowing the time and timeh registers to used
throughout an application.
The exiting tickless method, using Litex's timer0 has been left in place, as
it is a more performant option, but currently has the potential issue
identified in #11189.
when repeatedly enabling and disabling string-controlled configurations,
the generated toolchain configuration may be incorrect.
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
This is to fix issue in [this log](https://github.com/apache/nuttx/actions/runs/9173629303/job/25222879619):
```
Configuration/Tool: esp32c3-generic/twai esp32c6-devkitm/twai esp32c6-devkitc/twai esp32h2-devkit/twai
Error: common/espressif/esp_twai.c:242:7: error: variable 'ret' set but not used [-Werror=unused-but-set-variable]
```
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
By default, submodules are cloned with `--depth=1`. This continues
to be true if `DISABLE_GIT_DEPTH` environment variable is not
defined (and it is not defined by default). But, if defined the
submodules will be fully cloned (without the `--depth` parameter).
The original names are confusing; the symbols' addresses point to the start and end of the
sbi executable ram area. This may also reside in l2lim and not in ddr, depending on the
configuration, and this is defined in the linker script.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
This commits replicates some changes on files that were originally
written for other Espressif SoCs and inspired new implementations.
Eventually, these new implementations were improved and this commit
replicates these changes on the original sources.
Avoid using static mutex and recursive mutex as the resource to be
acquired/release. Instead, create a specific lock for each call if
it does not exist.
The bc022f8cd8 introduces a static way to calculate idle stack
address for risc-v platform. However, it uses the reverse order
to access idle stack, which breaks boards with smp configuration.
Correct the idle stack order of g_cpux_idlestack.
Fixes: bc022f8cd8 ("arch/risc-v: unify idle stack calculation")
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
As all the board allocate idle stack from _ebss. The idle stack
layout is fix and can be computed directly by using _ebss. There
is no need to use g_cpux_idlestack array anymore, remove it.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
As the stack layout is unified, it is possible to
use a unify formula to calculate the top of idle
stack.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
ESP32 SoC use a static allocated array as idle stack. To fit
the existed idle stack allocation, make idle stack allocated
from ebss for the whole esp32 series.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
This adds SBI specfication v0.3 based `riscv_sbi_system_reset()` to
support SBI firmware based system reset in kernel mode.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
1. Adjust code to avoid PM wakelock->count less than or equal to 0.
2. Fix some document format issues.
Signed-off-by: chenwen@espressif.com <chenwen@espressif.com>
Although almost all board support allocating idle stack after ebss,
bl602 have a different memory layout for idle stack. To unify them,
make idle stack allocated from ebss for bl602.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
NuttSBI have a simple ecall interface for the kernel, which make
it hard to add new SBI call for NuttSBI. So implement standard
ecall interface for NuttSBI and make life easier.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
The qemu-rv use a small init code for M mode in kernel build.
It is hard-coding and is difficult to change. Due to the fact,
introduce a already mature SBI implement (e.g OpenSBI) to
replace existing code is a better choice.
This patch introduce some change for qemu-rv:
1. use SSTC to provide time interrupt in kernel build
2. remove uncessary M mode trap.
For simplicity, this patch does not add support for booting
nuttx for any core, but force boot core to start core 0 and
let core 0 do the initialization.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
SSTC extension allows nuttx to implement S-mode timer directly,
which is useful for starting at S-mode.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
As `up_get_intstackbase` supports per cpu stack base, fix
the report value with the cpu specific one.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
It is misleading to allocate stack from static array and heap,
make all stack allocated from heap area.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
In some special chipsets, multiple CPUs may be bundled in one hardware
thread cluster, which results in hartid and cpuindex not being exactly
the same. The new option will decouple Scratch-based Per-CPU storage
with S-Mode to distinguish the real cpu index.
Signed-off-by: chao an <anchao@lixiang.com>
RISC-V provided fetch-and-op style atomic primitives as they scale
to highly parallel systems better than LR/SC or CAS. A simple
microarchitecture can implement AMOs using the LR/SC primitives,
provided the implementation can guarantee the AMO eventually
completes. More complex implementations might also implement AMOs
at memory controllers, and can optimize away fetching the original
value when the destination is x0.
Signed-off-by: chao an <anchao@lixiang.com>
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
This fixes names of program entry and linker script files so that to
support building kernel mode apps using CMake and export package.
flat and protected mode should be the same as before.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
