l3/l4 stack will decouple the reference of d_buf gradually, Only legacy
devices still retain d_buf support, new net devices will use d_iob
Signed-off-by: chao an <anchao@xiaomi.com>
to fix the following clang warning:
Error: chip/eoss3_irq.c:138:47: error: format specifies type 'unsigned int' but the argument has type 'uint32_t' (aka 'unsigned long') [-Werror,-Wformat]
_err("PANIC!!! Bus fault received: %08x\n", getreg32(NVIC_CFAULTS));
~~~~ ^~~~~~~~~~~~~~~~~~~~~~
%08lx
/github/workspace/sources/nuttx/include/debug.h:126:57: note: expanded from macro '_err'
__arch_syslog(LOG_ERR, EXTRA_FMT format EXTRA_ARG, ##__VA_ARGS__)
~~~~~~ ^~~~~~~~~~~
/github/workspace/sources/nuttx/arch/arm/src/common/arm_internal.h:134:24: note: expanded from macro 'getreg32'
^~~~~~~~~~~~~~~~~~~~~~~~~~~
Error: chip/eoss3_irq.c:146:49: error: format specifies type 'unsigned int' but the argument has type 'uint32_t' (aka 'unsigned long') [-Werror,-Wformat]
_err("PANIC!!! Usage fault received: %08x\n", getreg32(NVIC_CFAULTS));
~~~~ ^~~~~~~~~~~~~~~~~~~~~~
%08lx
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
1.Don't check the return value of nxsem_init or nxmutex_init
2.Fix some style issue
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
* arch/arm/src/tiva/common/tiva_lowputc.c
(tiva_lowsetup):
For each UART, if Kconfig enables RTS/CTS (e.g.,
CONFIG_UART0_IFLOWCONTROL and/or CONFIG_UART0_OFLOWCONTROL),
configure the corresponding GPIO(s).
* arch/arm/src/tiva/common/tiva_serial.c:
(struct up_dev_s):
If CONFIG_SERIAL_IFLOWCONTROL, add a bool field 'iflow'. If
CONFIG_SERIAL_OFLOWCONTROL, add a bool field 'oflow'. This is
inspired by the implementation for kinetis.
(g_uart0priv, g_uart1priv, g_uart2priv, g_uart3priv, g_uart4priv,
g_uart5priv, g_uart6priv, g_uart7priv):
If Kconfig enables RTS/CTS for a UART (e.g.,
CONFIG_UART0_IFLOWCONTROL thru CONFIG_UART7_OFLOWCONTROL), set
the corresponding iflow and/or oflow flag(s).
(up_setup):
Check the above-mentioned iflow and oflow flags and set or unset
the RTSEN and/or CTSEN bits in the UART's CTL register to enable
the feature.
The "p" format specifier already prepends the pointer address with "0x"
when printing.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Summary:
- TIVA_WITH_QEMU is used to run the NuttX with QEMU
- The configuration should not depend on TIVA_ETHERNET
- This commit fixes this issue
Impact:
- None
Testing:
- Tested with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
since it is broken and inefficient, and then removed by:
commit dc961baaea
Author: chao.an <anchao@xiaomi.com>
Date: Thu Apr 14 18:07:14 2022 +0800
arm/armv7-[a|r]: move fpu save/restore to assembly handler
Save/Restore FPU registers in C environment is dangerous practive,
which cannot guarantee the compiler won't generate the assembly code
with float point registers, especially in interrupt handling
Signed-off-by: chao.an <anchao@xiaomi.com>
commit 8d66dbc068
Author: chao.an <anchao@xiaomi.com>
Date: Thu Apr 7 13:48:04 2022 +0800
arm/armv[7|8]-m: skip the fpu save/restore if stack frame is integer-only
Signed-off-by: chao.an <anchao@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
