The enumeration process for composite and non-composite devices
has a lot of duplicate code. Treating the code for composite
devices as universal enumeration code can reduce redundant code.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
VELAPLATFO-12536
This provides the initial hooks for Flattened Device Tree support
with QEMU RV. It also provides a new procfs file that exposes the
fdt to userspace much like the /sys/firmware/fdt endpoint in Linux.
See https://www.kernel.org/doc/Documentation/ABI/testing/sysfs-firmware-ofw
Nodes in the fdt are not yet usable by the OS.
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
Signed-off-by: liaoao <liaoao@xiaomi.com>
We can use the driver in nuttx to download
files with debugger
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
Both the device and the pipe used the FSNODEFLAG_TYPE_DRIVER type before,
and now add an independent pipe type
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
This introduces non-generic option interface for IO expanders.
Some IO expanders have more advance options for pins and communication.
This is used to pass driver dependend structure to expander driver.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
1. support doublebuffer swtich for overlay layer
2. Add display area ioctl to scale the active area of the overlay layer
to a specific region on the LCD through hardware.
Signed-off-by: rongyichang <rongyichang@xiaomi.com>
Function gpio_lower_half_byname() was added to support registration of
GPIO pin by name as supported for IOexpander. Some of the code is wrapped
in new static function gpio_lower_half_internal() to avoid code
duplication.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This adds support for 16 bit io expander pcf8575. The driver is basically
the same as for pcf8574 however it is for 16 bits instead of 8 bits. Since
pcf8575 and pcf8574 can be both used on the same i2c bus the driver for
pcf8575 is implemented in a different file to reduce the code size
and complexity and to have less if statements in the driver.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
In POSIX standard spec https://pubs.opengroup.org/onlinepubs/7908799/xsh/mqueue.h.html, the field type in mq_attr should be long not size_t. And no logical judgment when mq_maxmsg <= 0 or mq_msgsize <= 0. In this change, i update the field type in mq_attr, and add the missing logical judgment.
Signed-off-by: yangjiao <yangjiao@xiaomi.com>
Some UART Controllers (Synopsys DesignWare 8250) will trigger spurious interrupts when the Line Control Register (LCR) is set while the UART is busy. This patch provides the option (16550_WAIT_LCR) to wait for UART until it's not busy, before setting the LCR. (16550_WAIT_LCR is disabled by default)
This patch fixes the spurious UART interrupts for the upcoming port of NuttX to StarFive JH7110 SoC (with Synopsys DesignWare 8250 UART). [The patch is explained here](https://lupyuen.github.io/articles/plic#appendix-fix-the-spurious-uart-interrupts)
drivers/serial/uart_16550.c: If 16550_WAIT_LCR is enabled, wait until UART is not busy before setting LCR
include/nuttx/serial/uart_16550.h: Define the UART Status Register (USR) for checking if UART is busy
drivers/serial/Kconfig-16550: Added option 16550_WAIT_LCR to 16550 UART Config, disabled by default
No memory map count limit that will exhaust memory and cause
the system hang. Also that fix pass LTP posix case mmap/24-1.c
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
When other code use nuttx memory manager by call mm_xx api directly,
it better to let other code to control weather dump or panic when
malloc failed.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
fix ltp_sigaltstack_6_1 testcase comile error:
iltp/testcases/open_posix_testsuite/conformance/interfaces/sigaltstack/6-1.c:41:28: \
error: ‘SS_ONSTACK’ undeclared (first use in this function); did you mean ‘SA_ONSTACK’?
ltp/testcases/open_posix_testsuite/conformance/interfaces/sigaltstack/8-1.c:41:28: \
error: ‘SS_DISABLE’ undeclared (first use in this function
Signed-off-by: yangyalei <yangyalei@xiaomi.com>
add RLIMIT_MEMLOCK define, enable compile mmap/18-1.c.
ltp/testcases/open_posix_testsuite/conformance/interfaces/mmap/18-1.c:95:16: \
error: ‘RLIMIT_MEMLOCK’ undeclared (first use in this function); did you mean ‘RLIMIT_STACK’?
Signed-off-by: yangyalei <yangyalei@xiaomi.com>
stack_t used by sigaltstack, make it compile sucess in sim.
Signed-off-by: yangyalei <yangyalei@xiaomi.com>
ltp: fix compile errors
Signed-off-by: yangyalei <yangyalei@xiaomi.com>
SIGWINCH used in ltp sigaction/16-1.c testcase.
ltp/testcases/open_posix_testsuite/conformance/interfaces/sigaction/16-1.c:79:3:
error: ‘SIGWINCH’ undeclared here (not in a function); did you mean ‘SIGINT’?
79 | {SIGWINCH, "SIGWINCH", 0},
| ^~~~~~~~
| SIGINT
Signed-off-by: yangyalei <yangyalei@xiaomi.com>
Before directly use sched_backtrace() with SCHED_BACKTRACE disable will
lead compile error, this commit avoid this problem by define
sched_backtrace to 0 when CONFIG_SCHED_BACKTRACE not enable.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
since the same function can be achieved by mount:
mount(NULL, "/mnt/unionfs", "unionfs", 0,
"fspath1=/mnt/path1,prefix1=prefix1,"
"fspath2=/mnt/path2,prefix2=prefix2");
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
drivers/sensors/bme680.c: The bme680 driver
sensor.h: Added new type of sensor (Gas) to be used for retrieving the bme680 data
esp32/common/src/esp32_bme680.c: bme680 support on esp32
esp32/esp32-sparrow_kit/esp32_bringup.c: added support for the bme680
esp32/esp32-sparrow-kit/configs/nsh/defconfig: fixed defconfig ci problem
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
esp32-sparrow-kit: Fixed defconfig
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
Code is now C89 compatible
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
Reused already defined sensor data structs by registering every sub-sensor separately
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
Implemented suggestions
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
