ubsan_prologue: ================================================================================
ubsan_prologue: UBSAN: shift-out-of-bounds in fat/fs_fat32util.c:989:40
__ubsan_handle_shift_out_of_bounds: left shift of 268435455 by 4 places cannot be represented in type 'int'
ubsan_epilogue: ================================================================================
Signed-off-by: chao an <anchao@xiaomi.com>
Some assertions in extreme cases will cause syslog to be unable to
output logs normally, so this PR will restore the input registers
into the array of last registers to ensure that we can also obtain
some important informations.
Signed-off-by: chao an <anchao@xiaomi.com>
Summary:
- Fixes a linker issue in https://github.com/apache/nuttx/pull/8244 by disabling compiler optimization.
- Adjusts CONFIG_DEFAULT_TASK_STACKSIZE to 4096 to ensure proper functioning of cxxtest.
Impact:
- The changes may slightly affect performance due to disabled optimizations
but are necessary for cxxtest stability.
Testing:
- Successfully tested on QEMU-8.1.2 with arm gcc 12.3.Rel1,
confirming resolution of the linker issue and stable operation of cxxtest.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
If the semaphore is shared, the holder has put its own mmapped address
to pholder->sem. This means we must switch to the holder's address
environment when going through the held semaphores list.
A better option would be to get the kernel mapped address for the
semaphore's physical page, but that mechanism is not functional yet.
This fixes a full system crash when CONFIG_PRIORITY_INHERITANCE=y and
CONFIG_BUILD_KERNEL=y and user makes shared semaphore via:
int semfd = shm_open("sem", O_CREAT | O_RDWR, 0666);
sem_t *sem = mmap(0, sizeof(sem_t), PROT_READ | PROT_WRITE, MAP_SHARED, semfd, 0);
Previous adjtime() implementation was limited to adjusting system
timer tick period. This commit reimplements the internals to use
a kernel watchdog timer. Platform-independent part of the code now
works also for adjusting hires RTC and tickless timer rate.
User code facing API is unchanged. Architecture code API has changed:
up_adj_timer_period() is replaced by up_adjtime().
Other improvements:
- Support query of remaining adjustment by passing NULL to first
argument of adjtime(). This matches Linux behavior.
- Improve resolution available for architecture driver, previously
limited to 1 microsecond per tick. Now 1 nanosecond per second.
In order to achieve better scalability, change the stride
from pixel mode to byte mode.For example, in the case of RGB888
mode with 466 pixels in width and a 4-byte aligned buffer,it is
only necessary to extend the buffer of one line from 1398 bytes
to 1400 bytes, instead of extending it to 1404 bytes.
Signed-off-by: rongyichang <rongyichang@xiaomi.com>
These values are board-specific properties that must be known on the application side.
Until now, these values had to be hardcoded on the application side.
Summary:
- Upgraded to xpack-riscv-none-elf-gcc-12.3.0-2 to resolve symbol recognition
issues in riscv-none-elf-gdb, as reported in
https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/issues/22.
Impact:
- Expected to enhance toolchain stability with no negative side effects.
Testing:
- Verified with rv-virt:netnsh and rv-virt:netnsh64 configurations
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
When we record data and dump data, they are all executed within the system,
and there is no need to consider the issue of big or small endianness.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
1. If CONFIG_ESP32S3_PHY_INIT_DATA_IN_PARTITION and CONFIG_ESP32S3_SUPPORT_MULTIPLE_PHY_INIT_DATA are enabled,
PHY initialization data (PHY initialization data is used for RF calibration) will be loaded from a partition.
2. The corresponding PHY init data type can be automatically switched according to the country code,
China's PHY init data bin is used by default, country code can be modified through the wapi command: wapi country <ifname> <country code>.
Signed-off-by: chenwen@espressif.com <chenwen@espressif.com>
If using flow control with a high CTS the thread may be
blocked forever on the second transmit attempt due to waiting
on the txdma semaphore. The calling thread can then never
make progress and release any resources it has taken, thus
may cause a deadlock in other parts of the system.
The implementation differs in behavior from interrupt-driven
TX. It should not implicitly wait on a taken semaphore but
return immediately and let the upper layers decide on what to
do next.
If using flow control with a high CTS the thread may be
blocked forever on the second transmit attempt due to waiting
on the txdma semaphore. The calling thread can then never
make progress and release any resources it has taken, thus
may cause a deadlock in other parts of the system.
The implementation differs in behavior from interrupt-driven
TX. It should not implicitly wait on a taken semaphore but
return immediately and let the upper layers decide on what to
do next.
If using flow control with a high CTS the thread may be
blocked forever on the second transmit attempt due to waiting
on the txdma semaphore. The calling thread can then never
make progress and release any resources it has taken, thus
may cause a deadlock in other parts of the system.
The implementation differs in behavior from interrupt-driven
TX. It should not implicitly wait on a taken semaphore but
return immediately and let the upper layers decide on what to
do next.
This commit sets the BLE's interrupt as a IRAM-enabled interrupt,
which enables it to run during a SPI flash operation. This enables
us to create a cache to off-load semaphores and message queues
operations and treat them when the SPI flash operation is finished.
By doing that, we avoid packet losses during a SPI flash operation.
