Gregory Nutt
3971d97332
Update ChangeLog
2015-07-09 08:27:08 -06:00
Sebastien Lorquet
b947002d6a
This commit adds:
...
-headers in nuttx/ioexpander to define the "generic" ioexpander framework
-files in drivers/ioexpander for the implementation of the NXP PCA9555 framework
-bindings in drivers/Kconfig and drivers/Makefile
From Sebastien Lorquet
2015-07-09 08:27:07 -06:00
Gregory Nutt
be09a87c0e
SST25: Eliminate some warnings
2015-07-03 14:38:33 -06:00
Sebastien Lorquet
c9649b5f04
STMPE811: I found that, in stmpe811_instanciate(), when CONFIG_STMPE811_MULTIPLE is enabled, and the call to stmpe811_checkid() fails, then the linked device list is not restored to its previous state. From Sebastien Lorquet.
2015-07-02 08:19:29 -06:00
Gregory Nutt
09c7373f24
Fix misc. compilation error/warning detected by tools/testbuild.sh
2015-07-01 14:33:37 -06:00
Gregory Nutt
8fbac280e9
drivers/net/slip.c: Fix a missed name change when many of network interface names changed sometime back but were apparently never updated for SLIP
2015-07-01 11:58:06 -06:00
Gregory Nutt
e9a4455038
drivers/usbdev: Eliminate some warnings
2015-07-01 10:02:19 -06:00
Gregory Nutt
342f5fe33d
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
Gregory Nutt
bb7e15fc57
Misc. improvements to the TUN driver, mostly related to poll(). From Max Neklyudov
2015-06-04 06:54:55 -06:00
Gregory Nutt
391367e8ca
LPC17 Ethernet: Add support for the Micrel KSZ8041 PHY.
2015-06-03 17:34:36 -06:00
Gregory Nutt
7355a9044a
TUN driver bug fix. From Max Neklyudov.
2015-06-03 10:45:13 -06:00
Gregory Nutt
4f05c80794
LPC17xx Ethernet: Improve CONFIG_NET_NOINTS implementation
2015-06-01 08:07:32 -06:00
Gregory Nutt
0476d8168a
More missing semicolons after DEBUGASSERT
2015-05-27 13:32:39 -06:00
Gregory Nutt
9e1c72e3e2
Add basic board build configurat for the SAML21 Xplained. Initial commit is jsut the SAMD20 Xplained with name changes and does not yet build
2015-05-18 13:16:32 -06:00
Gregory Nutt
82f51d01fb
Update some comments
2015-05-18 08:53:24 -06:00
Gregory Nutt
d43a09275a
AT24 EEPROM driver. Fix some an incorrect variable name used in conditional compilation. SourceForge patch #55
2015-05-15 06:15:58 -06:00
Gregory Nutt
2b3241d81f
Clean up some logic in the CDC/ACM host drivers. Test with some other host controller drivers. There are lots of problems.
2015-05-14 10:22:08 -06:00
Gregory Nutt
5b687f4b0f
Fix several defien -> define. Thanks Pierre
2015-05-13 06:33:17 -06:00
Gregory Nutt
6ef7977b65
USB device. All class drivers. There needs to be a check to make sure that the size of a returned string does not exceed the size of an allocated request buffer
2015-05-12 14:46:35 -06:00
Gregory Nutt
3c1af2feed
Local sockets: Add poll support for Unix stream sockets. From Jussi Kivilinna.
2015-05-12 07:41:12 -06:00
Gregory Nutt
9df6bd0543
USB host CDC/ACM driver requires CONFIG_SERIAL_REMOVABLE
2015-05-11 15:10:41 -06:00
Gregory Nutt
2f8d7f3a03
CDC/ACM host: Cancelling activity on bulk endpoint fixes a crash when device removed
2015-05-11 12:47:37 -06:00
Gregory Nutt
c7a02488c6
Fix a cut'n'paste error in the last commit
2015-05-10 10:23:23 -06:00
Gregory Nutt
46e5d0a419
Add options to support all three host CDC/ACM protocols: Compliant, Reduced, and Bulk-Only
2015-05-10 08:16:58 -06:00
Gregory Nutt
bd437bfb03
Update ChangeLog
2015-05-09 16:23:19 -06:00
Gregory Nutt
4715a2e697
Update TODO list
2015-05-09 08:23:11 -06:00
Gregory Nutt
6519dc475d
Use sched_kfree() instead of kmm_free()
2015-05-08 12:03:45 -06:00
Gregory Nutt
c35bb693a9
USB host CDC/ACM fixes. Still kind of buggy
2015-05-08 10:58:41 -06:00
Gregory Nutt
513344a084
Fix some missing quotes in a Kconfig file
2015-05-08 08:32:50 -06:00
Gregory Nutt
947fd7a5af
USB host CDC/ACM: Improve RX responsiveness
2015-05-07 11:27:51 -06:00
Gregory Nutt
214aeeff57
USB host CDC/ACM: Add a bulk-only mode mostly for test, fix two bad assertions. Correct some loop termination logic in RX data receipt
2015-05-07 11:16:03 -06:00
Gregory Nutt
53bb938f23
Misc improvements to the CDC/ACM host driver, mostly related to parsing the configuration descriptor. Still does not work.
2015-05-07 10:02:51 -06:00
Gregory Nutt
691d7c9819
Rename usbhost_storageinit() to usbhost_msc_initialize(). Add calls to usbhost_cdcacm_initialize() is CONFIG_USBHOST_CDCACM is selected.
2015-05-06 14:11:29 -06:00
Gregory Nutt
737fd7dcec
drivers/usbhost: Add initial implementatino of a host-side CDC/ACM driver. Completely untested on initial commit (2015-05-06).
2015-05-06 12:49:00 -06:00
Gregory Nutt
4a8fbd8817
USB host: More fixes from last changes.. MSC block read and write must again return number of blocks on success. Fix numerous places where the assumption the ret == OK means success. Since the transfer method now returns the number of byte transfered, the correct test for success is ret >= 0
2015-05-05 15:48:48 -06:00
Gregory Nutt
9296eca193
USB Host function address calculation needs to reset the 'next' address when an address is released
2015-05-05 14:59:03 -06:00
Gregory Nutt
47a112974d
USB host: Modify the transfer() and asynch() methods so that the actual size of the transfer is returned. Unverified on initial commit.
2015-05-05 13:14:22 -06:00
Gregory Nutt
81ab453f6a
Fix a mistatement in a comment
2015-05-04 13:44:49 -06:00
Gregory Nutt
ea17bc3b68
USB hub class: Was not using the configured poll delay value
2015-05-04 13:44:12 -06:00
Gregory Nutt
e903259476
Hub: Use usleep instead of up_mdelay
2015-05-04 07:46:13 -06:00
Gregory Nutt
435d088182
SAMA5 EHCI: Mostly cosmetic
2015-05-03 08:51:44 -06:00
Gregory Nutt
c2a3f936aa
USB host: Need to include the port structure when disconnecting, otherwise may destroy a root hub port
2015-05-02 10:44:18 -06:00
Gregory Nutt
e4f538446b
USB hub: Minor fix to reduce the amount of debug garbage on console in certain configurations
2015-04-30 13:03:28 -06:00
Gregory Nutt
1380945a13
USB hub: Add a configuration option to fallback to polling mode if the the HCD async method does not work. Don't call DRVR_CANCEL twice, and certainly not from the interrupt level. Add so checks so that we do not do some normal asynchronous actions if the hub has been disconnected
2015-04-30 11:30:01 -06:00
Gregory Nutt
b909ad04d8
USB HUB: Fix a deadlock that can occur if the HCD and the HUB try to share the high priority work queue. Now how work must be done on the low priority work queue.
2015-04-29 08:32:17 -06:00
Gregory Nutt
6e20a466ac
Merge remote-tracking branch 'origin/master' into usbhub
2015-04-27 12:27:43 -06:00
Gregory Nutt
cec90e144a
Another missing semicolon in a DEBUGASSERT statement
2015-04-27 12:26:40 -06:00
Gregory Nutt
d88d10830e
USB host: Fix an attempt to take a semaphore from an interrupt handler
2015-04-26 10:05:15 -06:00
Gregory Nutt
397f31f061
Another hub-related interface change: Need to pass speed to EP0
2015-04-26 09:53:43 -06:00
Gregory Nutt
3bae38a2d9
USB HID mouse/keyboard: Fix a reference counting problem
2015-04-25 17:05:30 -06:00
