Gregory Nutt
|
22f8503d0a
|
Convert ac_format and ac_controls to unions to make access a little cleaner
|
2014-07-24 10:21:04 -06:00 |
|
Gregory Nutt
|
dba43a9c75
|
Audio: Get rid of the decoder->driver IOCTLs that I added a couple of commits back; Use existing configure method
|
2014-07-24 09:56:39 -06:00 |
|
Gregory Nutt
|
e100726a41
|
Fix a type in the audio Kconfig file, UDIO->AUDIO
|
2014-07-23 14:48:21 -06:00 |
|
Gregory Nutt
|
72133f5d95
|
Add ioctls so that PCM decoder can configure the driver bitrate, num channels, and sample width
|
2014-07-23 12:21:04 -06:00 |
|
Gregory Nutt
|
516b343666
|
Flesh out missing PCM decoder methods
|
2014-07-23 11:58:43 -06:00 |
|
Gregory Nutt
|
ca7d7c34ce
|
Audio: Add a NULL audio device that can be used to simply unit-level testing of audio decoders
|
2014-07-23 10:12:32 -06:00 |
|
Gregory Nutt
|
cfa76b5278
|
Flesh out a few more PCM methods, still incomplete. Re-vision PCM structure definition
|
2014-07-22 19:23:05 -06:00 |
|
Gregory Nutt
|
d7a9633dcd
|
Rename pcm_decode.h to pcm.h since it will hold more than just decoding definitions. Fix some porting errors like idbg should auddbg, etc. Add wav file header and a few low-level wav utilities.
|
2014-07-22 15:54:56 -06:00 |
|
Gregory Nutt
|
8548c64915
|
Remove WM8904 driver unused paramters, clean-up comments, remove some kruft in capability reporting
|
2014-07-22 11:47:27 -06:00 |
|
Gregory Nutt
|
05e82d4f01
|
Add missing configuration option to select the MAX11802 touchscreen controller
|
2014-07-22 07:09:48 -06:00 |
|
Gregory Nutt
|
0b3ff976ff
|
Fix an error in SLIP escaping
|
2014-07-22 06:55:42 -06:00 |
|
Gregory Nutt
|
78d7925ce0
|
Kconfig: MW8904 driver no longer depends on EXPERIMENTAL (it probably still should)
|
2014-07-20 10:27:25 -06:00 |
|
Gregory Nutt
|
f4bcb730d2
|
WM8904 w/NxPlayer: Fix some compile errors and warnings with debug enabled
|
2014-07-20 09:17:36 -06:00 |
|
Gregory Nutt
|
4f6625380b
|
The WM8904 audio driver is mostly code complete and ready to begin initial testing
|
2014-07-19 18:52:58 -06:00 |
|
Gregory Nutt
|
6d9f9e37bf
|
SAMA5D4-EK: Add WM8904 initialization logic
|
2014-07-19 11:58:53 -06:00 |
|
Gregory Nutt
|
89ed7ab558
|
WM8904: Add initialization logic
|
2014-07-19 10:20:19 -06:00 |
|
Gregory Nutt
|
3b8c4a399d
|
Framework for a WM8904 audio driver. The initial driver check-in is simply Ken Pettit's VS1053 driver forced to compile with only WM8904 definitions
|
2014-07-18 15:35:12 -06:00 |
|
Gregory Nutt
|
1ff0536c7f
|
WM8904: Add header file support for this forcoming driver
|
2014-07-18 13:28:51 -06:00 |
|
Gregory Nutt
|
cc09d75180
|
MXT driver: Fix error in thread test... backward logic
|
2014-07-16 22:13:41 -06:00 |
|
Gregory Nutt
|
44e6516213
|
maXTouch: Add thresholding so that MOVE reports are not generated unless there is a significant change in the reported position
|
2014-07-12 14:00:33 -06:00 |
|
Gregory Nutt
|
4548ea731e
|
maXTouch: Fix error in state machine
|
2014-07-12 11:23:07 -06:00 |
|
Gregory Nutt
|
58ab6ec03f
|
NX graphics library: Macroize some color operators that become trivial when there is only one color plane
|
2014-07-12 07:44:56 -06:00 |
|
Gregory Nutt
|
3042fc5bc0
|
Missing closing quote in Kconfig file
|
2014-07-11 16:51:50 -06:00 |
|
Gregory Nutt
|
e91704c432
|
Minor Kconfig improvements
|
2014-07-11 16:25:35 -06:00 |
|
Gregory Nutt
|
ab1ab379dd
|
Addition rwbuffer interfaces should not be enabled unless they are needed; if rwbuffer support is enabled, it should not be unconditionally enabled in SMART and FTL
|
2014-07-11 16:19:17 -06:00 |
|
Gregory Nutt
|
8516551e54
|
Add an MTD layer that will add read-ahead or write buffering to any MTD driver (incomplete)
|
2014-07-11 11:20:11 -06:00 |
|
Gregory Nutt
|
f97113c5ef
|
SAMA5D4-EK: The maXTouch controller and test is now enabled by default in the NSH configuration
|
2014-07-10 08:42:25 -06:00 |
|
Gregory Nutt
|
3b0a797216
|
MXT driver works
|
2014-07-10 07:16:38 -06:00 |
|
Gregory Nutt
|
22fbcbb852
|
MXT driver is now at least partially functional
|
2014-07-09 18:56:53 -06:00 |
|
Gregory Nutt
|
e9362128bd
|
SAMA5 TWI: Add support for up_i2creset
|
2014-07-09 09:51:28 -06:00 |
|
Gregory Nutt
|
0da9aaeb09
|
Fix some recurring typos: postion->position, *atino->*ation
|
2014-07-08 13:12:36 -06:00 |
|
Gregory Nutt
|
25f419d487
|
MXT Driver: Make sure that all return values are checked: Fix worker thread -- it must hold the MXT device semaphore to access I2C
|
2014-07-08 08:55:43 -06:00 |
|
Gregory Nutt
|
ab8506163a
|
maXTouch: Fix some issues with interrupt handling
|
2014-07-07 13:25:20 -06:00 |
|
Gregory Nutt
|
5bbc0a0dd9
|
maXTouch: Check for successful memory allocation was backward
|
2014-07-07 09:55:39 -06:00 |
|
Gregory Nutt
|
0d14befb88
|
SAM3/4: Fix compile of sam_aes.c if CONFIG_CRYPTO_AES is defined. rom Max Nekludov
|
2014-07-07 08:03:18 -06:00 |
|
Gregory Nutt
|
dc7bcb0c1d
|
BCH: Add configurable AES encryption support to block-to-character (BCH) driver. This allows any block device to be accessed as an encrypted character device. From Max Nekludov
|
2014-07-07 08:00:00 -06:00 |
|
Gregory Nutt
|
09d0e2bdd2
|
maXTouch: Be consistent. Failure return values are not just non-zero, but negative
|
2014-07-06 09:08:38 -06:00 |
|
Gregory Nutt
|
4afc23d16d
|
maXTouch: Fix test of I2C_TRANSFER return value
|
2014-07-06 08:51:38 -06:00 |
|
Gregory Nutt
|
b4d3cebc2f
|
maXTouch: Fix I2C address, errors when debug enable, reorganize some data
|
2014-07-06 08:03:34 -06:00 |
|
Gregory Nutt
|
c5fc24e110
|
NET: Standardize naming of all protocal header lengths
|
2014-07-05 13:04:48 -06:00 |
|
Gregory Nutt
|
c2fc299332
|
Forgot to add a file in the last commit
|
2014-07-05 11:57:03 -06:00 |
|
Gregory Nutt
|
3e9f29ba07
|
Add very basic support for the Atmel maXTouch touchscreen controller
|
2014-07-05 11:47:54 -06:00 |
|
Gregory Nutt
|
60246e613b
|
NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed.
|
2014-07-04 19:13:08 -06:00 |
|
Gregory Nutt
|
0bb153b8cb
|
Remove all inclusion of uip.h
|
2014-07-04 16:58:22 -06:00 |
|
Gregory Nutt
|
a6b39d1879
|
NET: in-progress change... don't use
|
2014-07-04 16:38:51 -06:00 |
|
Gregory Nutt
|
cce35ce975
|
NET: More renaming
|
2014-07-04 15:40:49 -06:00 |
|
Gregory Nutt
|
b732388fcb
|
TSC2007: Cosmetic updates
|
2014-07-04 15:03:41 -06:00 |
|
Gregory Nutt
|
b36b29b4c3
|
SMARTFS: Increase some variables from uint16_t to uint32_t to handle larger device sizes. From Ken Pettit
|
2014-07-04 07:28:12 -06:00 |
|
Gregory Nutt
|
f881abe2da
|
Fix for a bug that would show up if CONFIG_MTD_BYTE_WRITE was not selected and the SMART sector size was larger than the mtd device's block size (like it would be if using SMARTFS on larger flash devices). From Ken Pettit
|
2014-07-03 18:14:51 -06:00 |
|
Gregory Nutt
|
8e9df8ade0
|
NET: Misc naming clean-up
|
2014-07-02 17:23:25 -06:00 |
|
Gregory Nutt
|
400edda109
|
NET: Rename XYZ_uiptxpoll to just XYZ_txpoll
|
2014-07-01 18:41:08 -06:00 |
|
Gregory Nutt
|
3b31e1ac80
|
SAMA5D4-EK: NSH configuration now has the RAMLOG enabled by default
|
2014-07-01 15:09:47 -06:00 |
|
Gregory Nutt
|
2630411332
|
RAMLOG: syslog_putc must set errno and return EOF on a failure
|
2014-07-01 15:09:07 -06:00 |
|
Gregory Nutt
|
3ee5b9209b
|
Rename CONFIG_RAMLOG_CONSOLE_BUFSIZE to just CONFIG_RAMLOG_BUFSIZE
|
2014-07-01 12:00:40 -06:00 |
|
Gregory Nutt
|
77330679d4
|
NET: Rename uip_mss to tcp_mss
|
2014-06-30 19:09:23 -06:00 |
|
Gregory Nutt
|
b0c1b7ef47
|
Rename uip_poll->devif_poll and uip_timer->devif_timer
|
2014-06-30 18:40:41 -06:00 |
|
Gregory Nutt
|
da7379ed18
|
Rename uip_input to devif_input
|
2014-06-30 18:11:17 -06:00 |
|
Gregory Nutt
|
dd8bb71cbc
|
Remove empty ADC write method. From Kosma Moczek
|
2014-06-30 07:55:28 -06:00 |
|
Gregory Nutt
|
f1dcb6674a
|
Extend erase block size to 18-bits in order (decrease block size to 14-bits) to handle parts with large erase blocks. From Kosma Moczek
|
2014-06-30 07:52:57 -06:00 |
|
Gregory Nutt
|
ed1aa8c594
|
E1000: Rename uip_dev to netdev
|
2014-06-29 13:03:19 -06:00 |
|
Gregory Nutt
|
fce2a79abd
|
Rename uip_driver_s net_driver_s
|
2014-06-27 16:48:12 -06:00 |
|
Gregory Nutt
|
64ba574ecc
|
Move files to net/utils; make appropriate name changes, most for uip_lock to net_lock
|
2014-06-26 14:23:21 -06:00 |
|
Gregory Nutt
|
621097b6c8
|
Rename ip_eth_hdr to eth_hdr_s
|
2014-06-25 09:57:52 -06:00 |
|
Gregory Nutt
|
5d1f8180d4
|
Move the remaining files from include/nuttx/net/uip to include/nuttx/net; Rename *_internal.h header files in net/ to just *.h
|
2014-06-24 10:14:15 -06:00 |
|
Gregory Nutt
|
37646044ac
|
Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/netdev.h
|
2014-06-24 09:28:44 -06:00 |
|
Gregory Nutt
|
8b450d6d1b
|
SAMA5D4: Add EMAC driver
|
2014-06-11 12:23:31 -06:00 |
|
Gregory Nutt
|
6f9bcd321c
|
Config/build changes to better support the RTL8187
|
2014-06-09 09:11:04 -06:00 |
|
Gregory Nutt
|
2e08560fa0
|
Clear rxhead on disconnect to prevent data from being resent on re-connect
|
2014-06-06 10:34:58 -06:00 |
|
Gregory Nutt
|
90e4b55e0c
|
Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/arp.h; rename all uip_arp_ functions to arp_
|
2014-05-30 12:13:06 -06:00 |
|
Gregory Nutt
|
6f3cb90c05
|
Cosmetic changes
|
2014-05-28 14:09:58 -06:00 |
|
Gregory Nutt
|
2abe0dd6dd
|
Change all variadic macros to C99 style
|
2014-05-22 09:01:51 -06:00 |
|
Gregory Nutt
|
2a509d560f
|
CC3000: Fix build when POLL is enabled. From Jussi Kivilinna.
|
2014-05-21 07:37:46 -06:00 |
|
Gregory Nutt
|
b584ecb967
|
CC3000: Fix a race condition in start-up of unsoliced_thread. From Jussi Kivilinna
|
2014-05-21 07:32:32 -06:00 |
|
Gregory Nutt
|
b2d26436de
|
Configuration has CC3000_SPI_MODE settings but source uses CONFIG_CC3000_SPIMODE. From Jussi Kivilinna
|
2014-05-21 07:20:09 -06:00 |
|
Gregory Nutt
|
a9d89b5442
|
Correct SPI mode for CC3000 is CPOL=0 CHPA=1. From Jussi Kivilinna
|
2014-05-21 07:17:46 -06:00 |
|
Gregory Nutt
|
c48bd737d0
|
SAM4E-EK: Add a driver for the on-board LCD (not tested on initial check-ing)
|
2014-05-13 10:38:46 -06:00 |
|
Gregory Nutt
|
ddf151c226
|
A fix to the last MB85RS1MT patch
|
2014-05-12 21:42:06 -06:00 |
|
Gregory Nutt
|
e3373aaf39
|
Add support for Fujitsu MB85RS1MT part. From Charles Ash
|
2014-05-12 18:43:06 -06:00 |
|
Gregory Nutt
|
b5efb9dd77
|
Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna
|
2014-05-08 09:01:14 -06:00 |
|
Gregory Nutt
|
7594d8b8cf
|
Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna
|
2014-05-08 09:00:33 -06:00 |
|
Gregory Nutt
|
35e94a5be4
|
LIS331DL driver: Correct build dependency. Sourceforge ticket #41 from Kosma Moczek
|
2014-05-08 07:39:10 -06:00 |
|
Gregory Nutt
|
f06e9dbcaa
|
Timer driver updates from Bob Doiron
|
2014-05-05 14:40:19 -06:00 |
|
Gregory Nutt
|
d897b4de76
|
Enhanced timer interface from Bob Doiron
|
2014-04-30 14:08:34 -06:00 |
|
Gregory Nutt
|
020583efa2
|
drivers/mtd/w25.c: Add support for the 8Mbit W25Q80BV part. From Mark Whitehorn.
|
2014-04-30 13:31:42 -06:00 |
|
Gregory Nutt
|
d119e4c977
|
Update TODO list and comments
|
2014-04-23 13:02:00 -06:00 |
|
Gregory Nutt
|
465bfcb4cf
|
Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few)
|
2014-04-22 13:42:38 -06:00 |
|
Gregory Nutt
|
972c4cbab5
|
Nucleo F401RE: Remove PX4 cruft that can in with the port
|
2014-04-22 12:18:08 -06:00 |
|
Gregory Nutt
|
5df14c7d40
|
Misc changes to get a clean compilation after incorporating all of Bob Doison's changes
|
2014-04-22 10:38:08 -06:00 |
|
Gregory Nutt
|
61555fe5e1
|
Various SAM4S related fixes, mostely related to the timer driver driver and the SAM4S timer/counter. All from Bob Doisin
|
2014-04-22 09:01:20 -06:00 |
|
Gregory Nutt
|
df33d9bcc8
|
examples/serialrx added by Bob Doison
|
2014-04-22 08:40:48 -06:00 |
|
Gregory Nutt
|
3884117ae9
|
Missing watchdog timer configuration setting
|
2014-04-21 19:13:21 -06:00 |
|
Gregory Nutt
|
5d7da97a35
|
SDIO-based MMC/SD improvements from Bob Doiron
|
2014-04-21 17:15:42 -06:00 |
|
Gregory Nutt
|
9485fbf66e
|
SAM3/4 Interrupt initialization. Default interrupt priority not being set correctly
|
2014-04-17 14:02:22 -06:00 |
|
Gregory Nutt
|
b83702dd8a
|
HID mouse: Don't include NAKs in error count. From Leo
|
2014-04-17 11:47:00 -06:00 |
|
Gregory Nutt
|
f58767ce79
|
MIO183QT-9A LCD driver updated to support reading from the LCD. From Toby Duckwork
|
2014-04-16 12:17:35 -06:00 |
|
Gregory Nutt
|
7ad2ace833
|
Costmetic changes to some comments
|
2014-04-14 16:36:07 -06:00 |
|
Gregory Nutt
|
48cdbfe5ba
|
examples/touchscreen: Add a configuration option to indicate that there is or is not an architecture-specific initialization function
|
2014-04-14 12:26:49 -06:00 |
|
Gregory Nutt
|
3a1324741a
|
More trailing whilespace removal
|
2014-04-13 14:32:20 -06:00 |
|
Gregory Nutt
|
f7e5953804
|
Cosmetic changes for coding style; removal of dangling spaces at the end of lines
|
2014-04-13 13:18:06 -06:00 |
|
Gregory Nutt
|
494387b33b
|
Make sure that there is one space after for
|
2014-04-12 13:28:22 -06:00 |
|