Commit Graph

624 Commits

Author SHA1 Message Date
Gregory Nutt
bb623d1e04 This commit renames all internal OS functions defined under sched/task so that they begin with the prefix. For example, nxtask_exit() vs. task_exit().
Squashed commit of the following:

    Trivial, cosmetic
    sched/, arch/, and include:  Rename task_vforkstart() as nxtask_vforkstart()
    sched/, arch/, and include:  Rename task_vforkabort() as nxtask_vforkabort()
    sched/, arch/, and include:  Rename task_vforksetup() as nxtask_vfork_setup()
    sched/:  Rename notify_cancellation() as nxnotify_cancellation()
    sched/:  Rename task_recover() to nxtask_recover()
    sched/task, sched/pthread/, Documentation/:  Rename task_argsetup() and task_terminate() to nxtask_argsetup() and nxtask_terminate(), respectively.
    sched/task:  Rename task_schedsetup() to nxtask_schedsetup()
    sched/ (plus some binfmt/, include/, and arch/):  Rename task_start() and task_starthook() to nxtask_start() and nxtask_starthook().
    arch/ and sched/:  Rename task_exit() and task_exithook() to nxtask_exit() and nxtask_exithook(), respectively.
    sched/task:  Rename all internal, static, functions to begin with the nx prefix.
2019-02-04 13:42:51 -06:00
Xiang Xiao
763ba51b78 arch/xxx/src/xxx/up_assert.c: Dump CPU0 IDLE stack only when PID equals 0. IDLE threads of other CPUs do not need this special check 2019-01-26 10:59:23 -06:00
ligd
5a6108c172 arch/xxx/src/common/up_initialize.c: Move up_pminitialize() after timer_initialize() 2019-01-26 07:32:14 -06:00
Gregory Nutt
db24306435 arch/assertion logic: Fix additional places where the test for an IDLE task is incorrect. It is not invalid in all configurations to check for PID==0. However, the logic fixed in these places lackes sufficient intelligence to find the right stack for the CPU IDLE thread and could still show the wrong stack. 2018-12-18 17:45:46 -06:00
Gregory Nutt
ec9265aa95 arch assertions: Correct duplicated logic from commit dbf01d12b7. Checking for PID == zero is not a valid way to test for the IDLE task in all configurations! This is only true in the single CPU configuration. In multiple CPU configurations, there will be a separate IDLE task for each CPU with a different PID. 2018-12-18 17:35:42 -06:00
Gregory Nutt
0af39e1493 arch/: Update all _exit() implementations for all architectures so that they correctly called the scheduler instumentation layer for the new task that runs when the old one exits. This missing instrumentation was confusing the Critical Section Monitor logic with uses this instrumentation to track the state of critical sections. 2018-11-24 18:20:57 -06:00
Gregory Nutt
7a45fc6f1c arch/arm/src/max326xx: Add framework for MAX326XX standard DMA support. 2018-11-20 08:09:03 -06:00
Xiang Xiao
dbf01d12b7 Assertions: Identify the running task correctly when dumping task state information. It takes time to switch to the target task after g_readytorun has been modified. If panic/assert happen during this period, the dump will contain the incorrect and confusing information due to the difference between the real running task and the return value of this_task(). This change resolve this problem by adding g_running_task to track the real running task through the context switch. 2018-11-15 07:11:51 -06:00
Xiang Xiao
543f4ed8ec arch/ all assertion functions: up_assert move the register dump to first make the more important info first 2018-11-11 12:53:59 -06:00
Xiang Xiao
dfe788be25 arch/ all assertion functinos: up_stackdump dump the full stack if stack overflow the stack info is very useful to find the backtrace 2018-11-11 12:52:36 -06:00
Xiang Xiao
e4106a3744 arch/ assertions files: up_registerdump capture the general register if not yet saved and up_saveusercontext is implemented, the register dump is very useful to find the cause of failure. 2018-11-11 12:50:50 -06:00
Gregory Nutt
2b3ec4172d arch/: Add 'BOARD_ASSERT_RESET_VALUE' in config/Kconfig and replace reboot status '0' to 'CONFIG_BOARD_ASSERT_RESET_VALUE'. 2018-11-10 14:06:46 -06:00
Gregory Nutt
6d93658ff8 Add new configuratin CONFIG_NET_MCASTGROUP. This option is selected automatically if either CONFIG_NET_IGMP or CONFIG_NET_MLD are selected. Most conditional logic based on CONFIG_NET_IGMP replaced with conditioning on CONFIG_NET_MCASTGROUP. 2018-10-31 15:03:51 -06:00
Gregory Nutt
9bc951a335 Rename devif_loopback_out to devi_loopback 2018-08-25 08:33:21 -06:00
dongjianli
19e16cb1ba up_internal.h: Define out the prototype for up_netinitialize() if CONFIG_NETDEV_LATEINIT is also defined 2018-08-24 14:50:45 -06:00
Xiang Xiao
0074afa0ac net/netdev: add devif_loopback_out() to check the loopback case where a packet is being sent to itself. Modify the net driver to call this function in this case. This function will simply re-inject the packet back into the network and the network driver will not put anything on the wire. 2018-08-24 09:21:33 -06:00
Xiang Xiao
e1202d2ed3 Replace all ASSERT with DEBUGASSERT to save the code space 2018-08-24 06:58:30 -06:00
Xiang Xiao
467d2a58ea Replace non critical PANIC with DEBUGPANIC to save the code space 2018-08-24 06:21:15 -06:00
xuanlin
2c93467436 pthreads: Add support static pthread stack. Add standard pthread_attr_setstack() and pthread_attr_getstack(). In all cases where the stack is released, add check to see which allocator must be used to free the stack: The user or the kernel allocator. 2018-08-23 09:49:20 -06:00
Xiang Xiao
a465b6f0d4 configs/: Change CONFIG_BOARD_RESET_ON_CRASH to CONFIG_BOARD_RESET_ON_ASSERT, arch/: Implement call to board_reset() if in all implementations of up_assert() when CONFIG_BOARD_RESET_ON_ASSERT=y. 2018-08-22 17:04:39 -06:00
Gregory Nutt
cba0ddad0e arch/: Most some common debug configuration settings out of header files and into Kconfig files where they belong. 2018-08-19 14:55:49 -06:00
Gregory Nutt
c790450ba2 Remove CONFIG_ARCH_CALIBRATION. It is awkward to use and no longer necessary now that we have apps/examples/calib_udelay. 2018-08-19 10:06:36 -06:00
Gregory Nutt
22cd0d47fa This commit attempts remove some long standard confusion in naming and some actual problems that result from the naming confusion. The basic problem is the standard MTU does not include the size of the Ethernet header. For clarity, I changed the naming of most things called MTU to PKTSIZE. For example, CONFIG_NET_ETH_MTU is now CONFIG_NET_ETH_PKTSIZE.
This makes the user interface a little hostile.  People thing of an MTU of 1500 bytes, but the corresponding packet is really 1514 bytes (including the 14 byte Ethernet header).  A more friendly solution would configure the MTU (as before), but then derive the packet buffer size by adding the MAC header length.  Instead, we define the packet buffer size then derive the MTU.

The MTU is not common currency in networking.  On the wire, the only real issue is the MSS which is derived from MTU by subtracting the IP header and TCP header sizes (for the case of TCP).  Now it is derived for the PKTSIZE by subtracting the IP header, the TCP header, and the MAC header sizes.  So we should be all good and without the recurring 14 byte error in MTU's and MSS's.

Squashed commit of the following:

    Trivial update to fix some spacing issues.
    net/: Rename several macros containing _MTU to _PKTSIZE.
    net/: Rename CONFIG_NET_SLIP_MTU to CONFIG_NET_SLIP_PKTSIZE and similarly for CONFIG_NET_TUN_MTU.  These are not the MTU which does not include the size of the link layer header.  These are the full size of the packet buffer memory (minus any GUARD bytes).
    net/: Rename CONFIG_NET_6LOWPAN_MTU to CONFIG_NET_6LOWPAN_PKTSIZE and similarly for CONFIG_NET_TUN_MTU.  These are not the MTU which does not include the size of the link layer header.  These are the full size of the packet buffer memory (minus any GUARD bytes).
    net/: Rename CONFIG_NET_ETH_MTU to CONFIG_NET_ETH_PKTSIZE.  This is not the MTU which does not include the size of the link layer header.  This is the full size of the packet buffer memory (minus any GUARD bytes).
    net/: Rename the file d_mtu in the network driver structure to d_pktsize.  That value saved there is not the MTU.  The packetsize is the memory large enough to hold the maximum packet PLUS the size of the link layer header.  The MTU does not include the link layer header.
2018-07-04 14:10:40 -06:00
Gregory Nutt
a94e3284b3 syslog: Enable is partial, crippled version of syslog_flush(); arch/: Call syslog_flush() from assertion handling logic. 2018-06-07 16:29:16 -06:00
Gregory Nutt
f2a89813f2 Build system: Remove fixed lib/ subdirectory and its content. Replace with new directory called staging/ that is created dynamically when building and removed when 'make clean' is done. This both improves the name and eliminates a garbage directory from the repository. 2018-05-29 11:36:21 -06:00
Gregory Nutt
b54ffe858a Standardization of some function headers. 2018-03-13 09:52:27 -06:00
Gregory Nutt
de6b13b3ab Per OpenGroup.org, syslog -- and, hence, nonstandard vsyslog, and debug wrappers -- does not return a value. Rename _vsyslog to nx_vsyslog. Use internal nx_vsyslog in the few cases where a return value is required. 2018-03-04 08:07:07 -06:00
Gregory Nutt
7cf88d7dbd Make sure that labeling is used consistently in all function headers. 2018-02-01 10:00:02 -06:00
Gregory Nutt
a8b6be4aaf The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method. 2018-01-22 08:17:45 -06:00
Gregory Nutt
2043e1a114 IOBs: Move from driver/iob to a better location in mm/iob 2017-05-09 07:35:30 -06:00
Gregory Nutt
b6b16bf4da Fix forward references that were mangled in last large changes. 2017-04-29 06:59:35 -06:00
Sebastien Lorquet
c70d797229 misc archs 2017-04-28 18:24:06 +02:00
Gregory Nutt
a55e937643 Correct mispelling 2017-04-22 17:03:34 -06:00
Gregory Nutt
79256573e1 net: network drver now retains Ethernet MAC address in a union so that other link layer addresses may be used in a MULTILINK environment. 2017-04-22 11:10:30 -06:00
Gregory Nutt
bfb93338f6 Move net/iob to drivers/iob so that the I/O buffering feature can be available to other drivers when networking is disabled. 2017-04-20 16:08:49 -06:00
Gregory Nutt
a581e9206d Convert remaining serial drivers to use use irq_attach. 2017-02-27 10:27:14 -06:00
Mark Schulte
b3222bbc8a irq_dispatch: Add argument pointer to irq_dispatch
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
2017-02-27 06:27:56 -06:00
Gregory Nutt
1d290c2b37 setvbuf: Add support for disabling I/O buffering. Initially cut; untested. 2017-02-09 09:24:44 -06:00
Gregory Nutt
62a1f6f110 up_timer_initialize() is named incorrectly. The prefix should be the architecture name, not up_ since it is private to the architecture. up_timerisr() is similarly misnamed and should also be private since it is used only with the xyz_timerisr.c files. Also updat TODO list. 2017-02-07 10:35:04 -06:00
Gregory Nutt
3ed091376c In all implementations of _exit(), use enter_critical_section() vs. disabling local interrupts. 2017-01-13 11:08:24 -06:00
Gregory Nutt
934aded293 arch/: Adapt all Ethernet drivers to work as though CONFIG_NET_MULTIBUFFER were set. Remove all references to CONFIG_NET_MULTIBUFFER 2016-11-29 16:06:48 -06:00
Paul A. Patience
912fe06a86 Add architecture-specific inttypes.h 2016-10-27 16:01:38 -04:00
Gregory Nutt
2b23d4b0e7 Correct some comments 2016-08-06 16:25:02 -06:00
Gregory Nutt
e77872057d Fix up a few remaining incorrect CONFIG_GPIO_IRQ 2016-07-22 15:01:00 -06:00
Gregory Nutt
5a9519d636 Rename HCS12 version of CONFIG_GPIO_IRQ to CONFIG_HCS12_GPIOIRQ 2016-07-22 14:53:17 -06:00
Gregory Nutt
c00ad93165 Rename HC version of CONFIG_GPIO_IRQ to CONFIG_HCS12_GPIOIRQ 2016-07-22 14:46:54 -06:00
Gregory Nutt
4b4dbc79a2 Move driver related prototypes out of include/nuttx/fs/fs.h and into new include/drivers/drivers.h 2016-07-20 13:15:37 -06:00
Gregory Nutt
d5388eca05 devrandom_register() must be called before devurandom_register() 2016-07-18 11:24:04 -06:00
Gregory Nutt
1660329d06 Rename up_rnginitialize to devrandom_register 2016-07-18 10:55:37 -06:00
David Alessio
6cefbc0c3f This change provides an option to add /dev/urandom to all architectures. The pseudo-random algorithm I choose strikes an arguably-good balance between being "random" and small/fast enough for 8/16 bit MCUs. It’s the well-documented xorshift128 algorithm. It has an internal state of 128 bits that can be [re-]seeded with a write. 2016-07-17 06:42:26 -06:00
Gregory Nutt
e7f0a56498 Correct some comments 2016-07-15 13:13:53 -06:00
Gregory Nutt
7b298a828d up_pminitialize() needs to be called from instances of up_initialize() 2016-07-15 13:11:28 -06:00
Gregory Nutt
d3b3c71d97 All architectures: Add logic to automatically register /dev/ptmx a boot time 2016-07-15 11:54:41 -06:00
Gregory Nutt
5118264e6c Rename CONFIG_SYSLOG_CONSOLE to CONFIG_CONSOLE_SYSLOG 2016-06-21 09:35:51 -06:00
Gregory Nutt
62d8f839c7 SYSLOG: Now a two phase initialization. Some SYSLOG channels cannot be initialized until later in the bringup 2016-06-21 07:52:24 -06:00
Gregory Nutt
7f16548f57 Replaces last three commits. Does the same thing, but does it in a way that does not change the usage model. 2016-06-21 05:26:08 -06:00
Gregory Nutt
c05da80a27 Eliminate a warning 2016-06-20 22:54:58 -06:00
Gregory Nutt
505ca542e8 Remove some last traces of lowvsyslog that were missed; Add a SYSLOG emergency channel for handling assertion output more cleanly 2016-06-20 16:11:50 -06:00
Gregory Nutt
43eb04bb8f Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
Gregory Nutt
d40a473f72 Without lowsyslog() *llwarn() is not useful. Eliminate and replace with *warn(). 2016-06-20 09:37:08 -06:00
Gregory Nutt
5b2aa7bf99 Remove all traces of CONFIG_SYSLOG 2016-06-19 13:59:43 -06:00
Gregory Nutt
0f18f3bd15 Move RAMLOG initialize from up_initialilize.c files to syslog_initialize(). up_initialize.c files now call syslog_initialize() unconditionally 2016-06-19 09:39:21 -06:00
Gregory Nutt
ac18dc27ca Common/Calypso/C5471: Convert *err() to either *info() or add ERROR:, depending on if an error is reported 2016-06-17 15:22:48 -06:00
Gregory Nutt
b39e53391d Add underscore at beginning of alert() as well 2016-06-16 12:38:05 -06:00
Gregory Nutt
0c8c7fecf0 Add _ to the beginning of all debug macros to avoid name collisions 2016-06-16 12:33:32 -06:00
Gregory Nutt
a97d3ae707 Centralize definitions associated with CONFIG_DEBUG_GPIO 2016-06-15 09:20:23 -06:00
Gregory Nutt
688e553d1d arch/hc/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-14 12:38:40 -06:00
Gregory Nutt
a98bc05f65 New debug macro: alert(). This is high priority, unconditional output and is used to simplify and stanardize crash error reporting. 2016-06-14 09:07:53 -06:00
Gregory Nutt
0f249016a0 Eliminate some warnings 2016-06-13 14:01:32 -06:00
Gregory Nutt
a1469a3e95 Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2 Rename *lldbg to *llerr 2016-06-11 14:55:27 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe Replace all occurrences of vdbg with vinfo 2016-06-11 11:59:51 -06:00
Gregory Nutt
3a74a438d9 Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO 2016-06-11 11:50:18 -06:00
Gregory Nutt
5ef3e3e215 Replace confusing references to uIP with just 'the network' 2016-05-30 11:52:07 -06:00
Gregory Nutt
e2e6ce3f1b Rename CONFIG_ARCH_HAVE_SCIn to CONFIG_SCIn_SERIALDRIVER 2016-05-25 10:46:55 -06:00
Gregory Nutt
fb484a581f All GCC final arch/*/src/Makefiles: Allow --start-group and --end-group to be redefined for the case where GCC is used to link (instead of LD). Suggested by Paul Alexander Patience. 2016-05-17 10:43:15 -06:00
Gregory Nutt
99e695398c Rename up_boot to arm_boot 2016-05-12 13:42:49 -06:00
Gregory Nutt
48106e605a Merge in arch/ submodule 2016-04-10 07:49:41 -06:00
Gregory Nutt
bd846c2e72 All architectures: Register the schedule note driver if enabled 2016-03-17 17:00:59 -06:00
Gregory Nutt
4d4f54a789 Rename current_regs to g_current_regs; For ARM, g_current_regs needs to be an array to support multiple CPUs 2016-03-09 13:41:48 -06:00
Gregory Nutt
9c63736c98 Standard some naming if code sectino comments 2016-02-21 18:06:09 -06:00
Gregory Nutt
83bc1c97c3 Rename irqsave() and irqrestore() to up_irq_save() and up_irq_restore() 2016-02-14 16:11:25 -06:00
Gregory Nutt
70e502adb0 Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section() 2016-02-13 19:11:09 -06:00
Gregory Nutt
2b8d1fcbdb HC: Replace explicit references to g_readytorun with indirect references via the macro this_task() 2016-02-06 15:20:08 -06:00
Gregory Nutt
1166e311b0 Networking: Remove the HSEC argument from devif_timer. 2016-02-03 11:17:15 -06:00
Gregory Nutt
7a13837fdd Remove the final vestiges of up_spiinitialize() 2016-01-27 09:26:14 -06:00
Gregory Nutt
a0ce222318 For M9S12 MCUs, rename up_spiinitialize to hcs12_spibus_initialize 2016-01-27 09:10:36 -06:00
Gregory Nutt
71c289ce4f Rename all architecture files of form xyz_internal.h to just xyz.h 2015-12-29 18:07:11 -06:00
Gregory Nutt
927b1dcc1f Initialize the telnet factory as part of the common architecture intialization 2015-12-07 11:40:29 -06:00
Gregory Nutt
2afd4595e4 Re-think how __KERNEL__ option is set in architecture Makefiles. Should be passed in EXTRADEFINES 2015-11-26 06:59:35 -06:00
Gregory Nutt
4aa3dcb51a __KERNEL__ should be defined when compiler architecture specific logic 2015-11-25 18:05:36 -06:00
Gregory Nutt
14d7ede265 All instances of up_initialize() should call loop_register() is CONFIG_DEV_LOOP=y 2015-11-25 17:10:41 -06:00
Gregory Nutt
076b05b460 In Kconfig of all CPUs with 16-bit address, force CONFIG_MM_SMALL=y 2015-11-23 12:16:35 -06:00
Gregory Nutt
79df561669 Rename board_led_off to board_autoled_off 2015-11-01 09:09:36 -06:00
Gregory Nutt
b28e32e3d3 Rename board_led_on to board_autoled_on 2015-11-01 09:07:06 -06:00
Gregory Nutt
6fc6d17760 Fix some spacing problems 2015-10-04 14:59:08 -06:00
Gregory Nutt
36726b1bc4 Standardize the width of all comment boxes in header files 2015-10-02 17:42:29 -06:00
Gregory Nutt
26eada3446 In all up_initialize() functions, automatically initialize TUN driver is so configureded 2015-09-06 09:35:29 -06:00
Gregory Nutt
975d912b40 Cosmetic: Move # of pre-processior command to column 1 2015-09-05 09:07:37 -06:00
Gregory Nutt
01cfe8c315 Networking: Move where the local loopback device is initialized from board_app_intiialize() to up_intiialize() so that it will happen automatically 2015-08-24 14:25:49 -06:00
Gregory Nutt
0843af5367 Fixes that call sched_resume_scheduler and sched_suspend_scheduler must include nuttx/sched.h 2015-07-29 16:51:26 -06:00
Gregory Nutt
eddf8161a5 Add scheduler resume/suspend calls to all implementations of up_release_pending() 2015-07-26 10:13:29 -06:00
Gregory Nutt
37969b8279 Add scheduler resume/suspend calls to all implementations of up_reprioritize_rtr() 2015-07-26 09:46:28 -06:00
Gregory Nutt
838c5355eb Correct resume scheduler hooks and add suspend scheduler hooks to all implementations of up_unblock_task 2015-07-26 09:07:47 -06:00
Gregory Nutt
a92c0a10ab Add scheduler resume/suspend calls in all implementations of up_block_task() 2015-07-26 08:31:23 -06:00
Gregory Nutt
9d98177daa Add logic to reset the replenish the sporadic scheduler when a task is resumed 2015-07-24 09:54:28 -06:00
Gregory Nutt
e9a3cc3457 Remove the arch/ subdirectory; replace it with a submodule 2015-07-22 10:56:22 -06:00
Gregory Nutt
8e4f3bddb6 Add CONFIG_NETDEV_LATEINIT that can be used to suppress calls to up_netinitialize() from early initialization 2015-07-17 07:20:16 -06:00
Gregory Nutt
652371c919 Add CONFIG_NETDEV_LATEINIT that can be used to suppress calls to up_netinitialize() from early initialization 2015-07-17 07:20:16 -06:00
Gregory Nutt
fb926e7283 Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
29136e51cc Clean up and review of header files for conformance to standards 2015-06-12 19:26:01 -06:00
Gregory Nutt
b578c98fa9 Clean up and review of header files for conformance to standards 2015-06-12 19:26:01 -06:00
Gregory Nutt
c07a9632cc Clean up and review of header files for conformance to standards 2015-06-12 19:17:42 -06:00
Gregory Nutt
c5b15d0b31 Clean up and review of header files for conformance to standards 2015-06-12 19:17:42 -06:00
Gregory Nutt
7bd3d5eaf1 Clean up and review of header files for conformance to standards 2015-06-12 19:00:52 -06:00
Gregory Nutt
be0fb09250 Clean up and review of header files for conformance to standards 2015-06-12 19:00:52 -06:00
Gregory Nutt
ae15c6963c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
Gregory Nutt
16814e2b00 Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
Gregory Nutt
a5043d5e60 Add support for dumping board-specific information on assertion. From David Sidrane 2015-03-04 07:00:29 -06:00
Gregory Nutt
76007d28f5 Add support for dumping board-specific information on assertion. From David Sidrane 2015-03-04 07:00:29 -06:00
Gregory Nutt
429863f348 arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions 2015-02-27 17:19:38 -06:00
Gregory Nutt
beaf976626 arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions 2015-02-27 17:19:38 -06:00
Gregory Nutt
f0d318c124 Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test. 2015-02-09 16:12:11 -06:00
Gregory Nutt
4f9998b4a8 Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test. 2015-02-09 16:12:11 -06:00
Gregory Nutt
8bac6b71ce SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville. 2015-02-08 06:53:24 -06:00
Gregory Nutt
3465cb6138 SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville. 2015-02-08 06:53:24 -06:00
Gregory Nutt
30b141e2c8 Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless 2015-01-24 06:49:51 -06:00
Gregory Nutt
7e46e94546 Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless 2015-01-24 06:49:51 -06:00
Gregory Nutt
9588b0e7a7 All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called 2015-01-21 11:36:33 -06:00
Gregory Nutt
32d2a4c548 All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called 2015-01-21 11:36:33 -06:00
Gregory Nutt
723b7fc430 Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address. 2015-01-20 15:52:25 -06:00
Gregory Nutt
1ad73c52b1 Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address. 2015-01-20 15:52:25 -06:00
Gregory Nutt
f6063c3896 Networking: Add missing raw/packet socket support to all Ethernet drivers 2015-01-20 15:14:29 -06:00
Gregory Nutt
a53ae59284 Networking: Add missing raw/packet socket support to all Ethernet drivers 2015-01-20 15:14:29 -06:00
Gregory Nutt
07132f462f Ethernet drivers: Use IFF_IS_IPv4 macro. Cannot rely on the EtherType being set correctly. 2015-01-20 06:26:14 -06:00
Gregory Nutt
92f440c20c Ethernet drivers: Use IFF_IS_IPv4 macro. Cannot rely on the EtherType being set correctly. 2015-01-20 06:26:14 -06:00
Gregory Nutt
ac69e11a5f Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received 2015-01-15 09:31:23 -06:00
Gregory Nutt
278c485229 Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received 2015-01-15 09:31:23 -06:00
Gregory Nutt
836a8b1625 - Rename devif_input() ipv4_input()
- Copy net/devif/devif_input.c to ipv6_input.c.  Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c.  Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
2015-01-15 08:03:56 -06:00
Gregory Nutt
89538ac4a2 - Rename devif_input() ipv4_input()
- Copy net/devif/devif_input.c to ipv6_input.c.  Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c.  Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
2015-01-15 08:03:56 -06:00
Gregory Nutt
6bc54c3541 Networking: Condition certain ARP logic on CONFIG_NET_ARP in all Ethernet drivers 2015-01-15 07:07:39 -06:00
Gregory Nutt
2f4aa0bde7 Networking: Condition certain ARP logic on CONFIG_NET_ARP in all Ethernet drivers 2015-01-15 07:07:39 -06:00
Gregory Nutt
bf984b2b3a Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday 2014-11-15 08:22:51 -06:00
Gregory Nutt
388ef8db1a Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday 2014-11-15 08:22:51 -06:00
Gregory Nutt
db9901e2f9 Update everything under nuttx/arch to use the corrected syslog interfaces 2014-10-08 12:48:47 -06:00
Gregory Nutt
7b310711a1 Update everything under nuttx/arch to use the corrected syslog interfaces 2014-10-08 12:48:47 -06:00
Gregory Nutt
3dd3b1f5e2 The 'make export' target needs to bundle up the user C startup file (crt0), not the kernel head object 2014-09-04 13:31:34 -06:00
Gregory Nutt
56dc80cf59 The 'make export' target needs to bundle up the user C startup file (crt0), not the kernel head object 2014-09-04 13:31:34 -06:00
Gregory Nutt
31b8137956 There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing. 2014-09-01 15:39:34 -06:00
Gregory Nutt
64ab35b399 There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing. 2014-09-01 15:39:34 -06:00
Gregory Nutt
ec086adfae Reanem kzalloc to kmm_zalloc for consistency 2014-08-31 17:34:44 -06:00
Gregory Nutt
205260d5e2 Reanem kzalloc to kmm_zalloc for consistency 2014-08-31 17:34:44 -06:00
Gregory Nutt
10ca085b09 Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
Gregory Nutt
1780810d3d Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
Gregory Nutt
bcb5a5316e Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming 2014-08-31 16:24:24 -06:00
Gregory Nutt
9aca0c1c84 Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming 2014-08-31 16:24:24 -06:00
Gregory Nutt
e11679acf8 Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
e3ff0689bb Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
35b11a7533 Fix an error introduced into ALL implmentations of interrupt dispatch logic 2014-08-28 08:41:57 -06:00
Gregory Nutt
45f3328247 Fix an error introduced into ALL implmentations of interrupt dispatch logic 2014-08-28 08:41:57 -06:00
Gregory Nutt
8bdde7b2d1 Add address environment support to ALL implementatins of up_release_pending() 2014-08-28 08:10:19 -06:00
Gregory Nutt
dfdaeb31ac Add address environment support to ALL implementatins of up_release_pending() 2014-08-28 08:10:19 -06:00
Gregory Nutt
1b24afe6fc Add address environment support to ALL implementatins of up_reprioritize_rtr() 2014-08-28 07:54:07 -06:00
Gregory Nutt
9598412386 Add address environment support to ALL implementatins of up_reprioritize_rtr() 2014-08-28 07:54:07 -06:00
Gregory Nutt
0fa16abd49 AVR32: Move address environment switch from the task switchers to the interrupt handler. That may save doing the action multiple times per interrupt 2014-08-28 07:06:19 -06:00
Gregory Nutt
eac58d5849 AVR32: Move address environment switch from the task switchers to the interrupt handler. That may save doing the action multiple times per interrupt 2014-08-28 07:06:19 -06:00
Gregory Nutt
756054d745 Add ADDRENV support to ALL implmentations of _exit() 2014-08-27 16:31:02 -06:00
Gregory Nutt
9bc9d2d86d Add ADDRENV support to ALL implmentations of _exit() 2014-08-27 16:31:02 -06:00
Gregory Nutt
7055bce8b4 Add ADDRENV support to ALL implementations of up_unblock_task() 2014-08-27 16:15:46 -06:00
Gregory Nutt
4d24c48901 Add ADDRENV support to ALL implementations of up_unblock_task() 2014-08-27 16:15:46 -06:00
Gregory Nutt
5bf114e604 Add ADDRENV support to all implementations of up_block_task() 2014-08-27 15:36:52 -06:00
Gregory Nutt
57c066b7a3 Add ADDRENV support to all implementations of up_block_task() 2014-08-27 15:36:52 -06:00
Gregory Nutt
2bc16b2ba5 wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide. 2014-08-21 11:16:55 -06:00
Gregory Nutt
ad9b3f8ab8 wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide. 2014-08-21 11:16:55 -06:00
Gregory Nutt
6455f60c60 Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures 2014-08-08 18:39:28 -06:00
Gregory Nutt
e1769b22f1 Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures 2014-08-08 18:39:28 -06:00
Gregory Nutt
4dc151097e Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h 2014-08-08 17:53:55 -06:00
Gregory Nutt
d798dd37a7 Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h 2014-08-08 17:53:55 -06:00
Gregory Nutt
c98ece6bec Move task control files from sched/ to sched/task 2014-08-08 16:44:08 -06:00
Gregory Nutt
23a334c066 Move task control files from sched/ to sched/task 2014-08-08 16:44:08 -06:00
Gregory Nutt
1c99d53bb1 Move clock functions from sched/ to sched/clock 2014-08-08 14:43:02 -06:00
Gregory Nutt
d4b56eb3cc Move clock functions from sched/ to sched/clock 2014-08-08 14:43:02 -06:00
Gregory Nutt
39183d37b8 Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors 2014-08-07 18:00:38 -06:00
Gregory Nutt
c9661ad5a7 Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors 2014-08-07 18:00:38 -06:00
Gregory Nutt
594083d870 Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined. 2014-08-06 16:26:01 -06:00
Gregory Nutt
736d3c169a Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined. 2014-08-06 16:26:01 -06:00
Gregory Nutt
d7fe256821 NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed. 2014-07-04 19:13:08 -06:00
Gregory Nutt
60246e613b NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed. 2014-07-04 19:13:08 -06:00
Gregory Nutt
99ce3a44d7 Remove all inclusion of uip.h 2014-07-04 16:58:22 -06:00
Gregory Nutt
0bb153b8cb Remove all inclusion of uip.h 2014-07-04 16:58:22 -06:00
Gregory Nutt
11e3a21411 NET: More renaming 2014-07-04 15:40:49 -06:00
Gregory Nutt
cce35ce975 NET: More renaming 2014-07-04 15:40:49 -06:00
Gregory Nutt
400edda109 NET: Rename XYZ_uiptxpoll to just XYZ_txpoll 2014-07-01 18:41:08 -06:00
Gregory Nutt
313982ba18 NET: Rename XYZ_uiptxpoll to just XYZ_txpoll 2014-07-01 18:41:08 -06:00
Gregory Nutt
621ec21bfd Rename uip_poll->devif_poll and uip_timer->devif_timer 2014-06-30 18:40:41 -06:00
Gregory Nutt
b0c1b7ef47 Rename uip_poll->devif_poll and uip_timer->devif_timer 2014-06-30 18:40:41 -06:00
Gregory Nutt
ade8807a61 Rename uip_input to devif_input 2014-06-30 18:11:17 -06:00
Gregory Nutt
da7379ed18 Rename uip_input to devif_input 2014-06-30 18:11:17 -06:00