This PR adds support for the StarFive JH7110 RISC-V SoC. This will be used by the upcoming port of NuttX for PINE64 Star64 SBC. [The source files are explained in the articles here](https://github.com/lupyuen/nuttx-star64)
Modified Files in arch/risc-v:
Kconfig: Added ARCH_CHIP_JH7110 for JH7110 SoC
New Files in arch/risc-v:
include/jh7110/chip.h: JH7110 Definitions
include/jh7110/irq.h: Support 127 External Interrupts
src/jh7110/chip.h: Interrupt Stack Macro
src/jh7110/jh7110_allocateheap.c: Kernel Heap
src/jh7110/jh7110_head.S: Linux Header and Boot Code
src/jh7110/jh7110_irq.c: Configure Interrupts
src/jh7110/jh7110_irq_dispatch.c: Dispatch Interrupts
src/jh7110/jh7110_memorymap.h: Memory Map
src/jh7110/jh7110_mm_init.c, jh7110_mm_init.h: Memory Mgmt
src/jh7110/jh7110_pgalloc.c: Page Allocator
src/jh7110/jh7110_start.c: Startup Code
src/jh7110/jh7110_timerisr.c: Timer Interrupt
src/jh7110/hardware/jh7110_memorymap.h: PLIC Base Address
src/jh7110/hardware/jh7110_plic.h: PLIC Register Addresses
src/jh7110/Kconfig: JH7110 Config
src/jh7110/Make.defs: Makefile
* Error handling for abnormal interrupts and DMA errors is now
enabled for all builds, regardless of any DEBUG configuration.
* Error handling resets the MAC for the specific errors that
may halt the Ethernet operation, instead of everything as it
was before.
The window opens when the fb opens and closes when the fb closes.
test step: run fb demo, 1. ./nuttx 2. fb
Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
- Added Wi-Fi related symbols to the kernel-space linker;
- Allocate more RAM to the kernel (to be useb by the Wi-Fi driver).
- Create a specific defconfig.
Instead of setting kernel/user space instruction and data ROM as
hard-coded values on linker, set them according to the max size
of the kernel image set by CONFIG_ESP32S3_KERNEL_IMAGE_SIZE. This
is done by making KIROM, UIROM, KDROM and UDROM dependent on the
kernel size value. Also, override CONFIG_NUTTX_USERSPACE config
according to CONFIG_ESP32S3_KERNEL_IMAGE_SIZE by using a custom
PREBUILD definition.
when executing ioctl AUDIOIOC_GETBUFFERINFO,the priv->pcm is still NULL,
so it will return -ENXIO,we can remove this check at the start of ioctl
and add in the case where it is used.
Signed-off-by: shipei <shipei@xiaomi.com>
When supporting high-priority interrupts, updating the
g_running_tasks within a high-priority interrupt may be
cause problems. The g_running_tasks should only be updated
when it is determined that a task context switch has occurred.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
stack_t used by sigaltstack, make it compile sucess in sim.
Signed-off-by: yangyalei <yangyalei@xiaomi.com>
ltp: fix compile errors
Signed-off-by: yangyalei <yangyalei@xiaomi.com>
Instead of clearing the fields individually, just wipe the whole register.
This can be done because flags and rm are just parts of the fcsr.
31 8 5 0
+--------------+--------+-----------+
| | | |
| RESERVED | FRM | FSTATUS |
| | | |
+--------------+--------+-----------+
FCSR
- Save the FPU registers into the tcb so they don't get lost if the stack
frame for xcp.regs moves (as it does)
- Handle interger and FPU register save/load separately
- Integer registers are saved/loaded always, like before
- FPU registers are only saved during a context switch:
- Save ONLY if FPU is dirty
- Restore always if FPU has been used (not in FSTATE_OFF, FSTATE_INIT)
- Remove all lazy-FPU related logic from the macros, it is not needed
Why? The tcb can contain info that is needed by the context switch
routine. One example is lazy-FPU handling; the integer registers can
be stored into the stack, because they are always stored & restored.
Lazy-FPU however needs a non-volatile location to store the FPU registers
as the save feature will skip saving a clean FPU, but the restore must
always restore the FPU registers if the thread uses FPU.
In the init phase of the OS, arch_get_current_tcb return NULL. Enable
the memory backatrace default will crash in backtrace function.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
If the cache is already enabled before NuttX starts up,
enabling the cache in NuttX will cause the cache to be
re-invalidated, then resulting in data that is already
in the cache being flushed out.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Basically, it reserves an area of the RTC memory to preserve the
RTC timer.
Please refer to:
fa76c82a5b
This commit also removes the rtc.dummy section because C3, C6 and
H2 don't need to skip it once the region is accessed by the same
address space using the instruction and data bus.
