Gregory Nutt
eceac1612d
Fix some compilation errors introduced in the last commit
2015-01-31 13:24:59 -06:00
Gregory Nutt
eb1aca3e46
Add an unlink method to block driver interface. Same motivataion as for the same modification to the character driver interface
2015-01-31 13:19:23 -06:00
Gregory Nutt
fa949604ba
Remove reference to used variable
2015-01-31 12:49:51 -06:00
Gregory Nutt
f24520acbb
Backout use of named initializers. Not C99
2015-01-31 12:29:21 -06:00
Gregory Nutt
39a5238c43
Pipes/FIFOs: Implement the unlink method. If the pipe/FIFO is unlinked, it will marked the pipe/FIFO as unliked. If/when all open references to the driver are closed, all of the driver resources will be freed.
2015-01-31 12:05:01 -06:00
Gregory Nutt
e86d00913e
Unix domain/FIFOs: Fix a race condition between FIFO buffer operations and the opening and closing of FIFOs which necessary when the FIFOs are used to support Unix domain, datagram sockets. The default policy is the deallocate FIFO buffering when the last client closes the pipe. When when used for datagram communicatinos, packets left in the FIFO will be lost. Some like UDP read-ahead is needed: The buffered data in the FIFO needs to be retained until the reader gets a chance to re-open the FIFO. Added an ioctl (PIPEIOC_POLICY) to control the buffer policy. Default (0) is the legacy behavior; Unix domain datagram logic sets the alternative policy so that the packet data persists after the FIFO is closed.
2015-01-30 11:14:24 -06:00
Gregory Nutt
2f009a2afe
Networking: SLIP interface improvements. From Macs N.
2015-01-30 08:09:38 -06:00
Gregory Nutt
32d2a4c548
All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called
2015-01-21 11:36:33 -06:00
Gregory Nutt
1ad73c52b1
Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address.
2015-01-20 15:52:25 -06:00
Gregory Nutt
a53ae59284
Networking: Add missing raw/packet socket support to all Ethernet drivers
2015-01-20 15:14:29 -06:00
Gregory Nutt
a4a6917267
Fixes some issues found by the PX4 team using Coverity. From Pavel Krienko
2015-01-19 13:01:20 -06:00
Gregory Nutt
bbafb8f2fe
Tiva Ethernet: When calling into the stack from the worker thread, it is necessary to have the stack locked
2015-01-18 16:58:11 -06:00
Gregory Nutt
b7c0bfebd5
Tive Ethernet: Fix some race conditions in the driver that become apparent when debug is enabled
2015-01-17 10:59:45 -06:00
Gregory Nutt
b648733589
Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received
2015-01-15 10:25:53 -06:00
Gregory Nutt
89538ac4a2
- Rename devif_input() ipv4_input()
...
- Copy net/devif/devif_input.c to ipv6_input.c. Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c. Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
2015-01-15 08:03:56 -06:00
Gregory Nutt
a7ce1279f9
Networking: (1) Copied all ICMP sources files to net/icmpv6 with proper renaming and removal of IPv4 logic, (2) remove IPv6 logic from files in net/icmp, (3) copied include/nuttx/icmp.h to icmpv6.h and removed IPv4 specific logic, (4) removed all IPv6 logic from icmp.h, (5) IP_HDRLEN became IPv4_HDRLEN and IPv6_HDRLEN, (6) ip_chksum() became ipv4_chksum() and ipv6_chksum(), and (7) added partial support for ICMPv6 statistics.
2015-01-14 16:10:38 -06:00
Gregory Nutt
31a94816b2
USB host drivers: Change all parmeters named class to usbclass to avoid C++ conflicts
2015-01-11 08:05:09 -06:00
Gregory Nutt
83d6e6403c
drivers/mmcsd/Kconfig: ARCH_HAVE_SDIOWAIT_WRCOMPLETE should not depend on MMCSD_SDIO
2015-01-09 07:21:43 -06:00
Gregory Nutt
089e001874
STM32 SDIO: CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE should not be available unless CONFIG_MMCSD_SDIO=y
2015-01-08 18:12:06 -06:00
Gregory Nutt
f787440a04
STM32 SDIO: Don't let architectures select CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE unless they have implemented SDIOWAIT_WRCOMPLETE
2015-01-08 17:47:34 -06:00
Gregory Nutt
1842525cc2
MMCSD SDIO: Add support for a new SDWAIT_WRCOMPLETE condition. The previous logic used a busy-wait loop to pool the card R1 start to determine when the card was ready for the next transfer. That busy-wait can be quite long -- hundreds of milliseconds. And alternative is to look the the SD D0 pin which will change state when the card is no longer busy.
...
This logic implements a change the avoids the busy-wait poll by reconfiguring the SD D0 pin as a GPIO interrupt, then waiting for the card to becom ready without taking up CPU cycles.
This change is conditioned on CONFIG_MMCSD_SDIOWATI_WRCOMPLETE and is currenlty only implemented for the STM32 SDIO driver.
From David Sidrane
2015-01-08 06:23:42 -06:00
Gregory Nutt
383a47fb28
DK-TM4C129X: Add support for on-board TMP100 temperature sensor
2015-01-06 11:50:56 -06:00
Gregory Nutt
207835bd0d
Tiva PHY Interrupts: Need to read the PHY interrupt status register in order to clear the pending PHY interrupt
2015-01-05 15:12:45 -06:00
Gregory Nutt
52aeabb4b2
Cosmetic changes
2015-01-02 13:59:47 -06:00
Gregory Nutt
51b220c6d5
Ethernet skeleton: Add some more example logic
2014-12-31 13:45:19 -06:00
Gregory Nutt
2317da4192
Minor corrections to Ethernet driver skeleton
2014-12-31 13:02:30 -06:00
Gregory Nutt
6d1a79ed40
Minor updated to Ethernet driver skeleton
2014-12-31 12:26:18 -06:00
Gregory Nutt
09446f7d27
Update drivers/net/skeleton.c
2014-12-31 06:37:14 -06:00
Gregory Nutt
157916ba4c
Uses DEBUASSERT, mut include assert.h
2014-12-30 16:58:02 -06:00
Gregory Nutt
3666af88d4
drivers/net/skeleton.c: Add outline for support with CONFIG_NET_NOINTS
2014-12-30 14:56:37 -06:00
Gregory Nutt
5ee81c0d50
Serial: Allow serial console selection even if /dev/console is disabled: There can still be a serial console with no file system at all
2014-12-28 15:23:05 -06:00
Gregory Nutt
089578319a
STM32 Serial: PX4 HW workarround for flaky STM32 RTS. From David Sidrane
2014-12-27 18:58:18 -06:00
Gregory Nutt
33f7151cd9
Remove STM32-specific RX flow control logic from the upper level serial driver to the lower level STM32 serial driver
2014-12-27 09:45:45 -06:00
Gregory Nutt
32fd858dc6
Serial RX Flow Control: Fix a bunch of compile problems introduced into unbuilt, conditioned out logic
2014-12-27 08:15:41 -06:00
Gregory Nutt
2fadd0da4b
Eliminate an unnecessary calculation in the serial RX flow control logic
2014-12-27 08:00:48 -06:00
Gregory Nutt
aefde565d3
Serial Upper Half: Add watermarks to RX flow control logic
2014-12-27 07:43:06 -06:00
Gregory Nutt
1c39b67e32
STM32: Fix some incorrectly placed conditional logic
2014-12-26 12:41:35 -06:00
Gregory Nutt
33bcb5dbca
Back out some incorrect conditional compilation
2014-12-26 10:26:52 -06:00
Gregory Nutt
6daa9468f6
More RAMTRON related fixes from David Sidrane
2014-12-26 08:15:59 -06:00
Gregory Nutt
996d6c9d55
Most superstitous updates to the RAMTROM driver make it more compatibile with the version used by PX4. From David Sidrane
2014-12-26 07:59:09 -06:00
Gregory Nutt
64ce7563f2
CC3000: Fix yet another typo in last two commitsgit diff I should not be doing this when I have the flugit diff
2014-12-18 16:27:46 -06:00
Gregory Nutt
49a22f1ccb
CC3000: Oops. Fix an error in the last commit
2014-12-18 07:39:55 -06:00
Gregory Nutt
2fe506d70c
CC3000 Fix: Data can be unaligned. When dereferences as an input ntosh(), a bad value is returned. Reported by Alan Carvalho de Assis
2014-12-18 07:18:00 -06:00
Gregory Nutt
8e4f7230f9
ADXL345: Don't select device if only change SPI settings
2014-12-17 12:01:18 -06:00
Gregory Nutt
34609141b0
ADXL345: Free allocations on failure
2014-12-16 17:27:09 -06:00
Gregory Nutt
d818ab5e35
Update the ADXL345 interface following the current interface scheme
2014-12-16 11:45:28 -06:00
Gregory Nutt
c9ca51fc8a
Minor clean-up associated with the ADX345 driver
2014-12-16 10:18:44 -06:00
Gregory Nutt
ae18f9dacd
Unify sensor debug. ADX driver was using input debug; LM75 and QENCODE that their own custom debug. Now all use CONFIG_DEBUG_SENSOR, sndbg()
2014-12-16 09:54:32 -06:00
Gregory Nutt
10863af628
Add ADXL345 accelerometer driver. From Alan Carvalho de Assis
2014-12-16 08:16:53 -06:00
Gregory Nutt
ece6963c21
Update a README file
2014-12-16 07:51:50 -06:00
Gregory Nutt
4aa9320da9
Update README files
2014-12-15 19:01:40 -06:00
Gregory Nutt
623757d77c
Update TODO list and add REVISIT comment
2014-12-13 08:44:28 -06:00
Gregory Nutt
d09bb13833
In case a thread is doing a blocking operation (e.g. read()) on a serial
...
device, while it is being terminated by pthread_cancel(), then
uart_close() gets called, but the semaphore (dev->recv.sem in the above
example) is still blocked.
This means that once the serial device is opened next time, data will
arrive on the serial port (and driver interrupts handled as normal), but
the received characters never arrive in the reader thread.
This patch addresses the problem by re-initializing the semaphores on the
last uart_close() on the device.
2014-12-13 08:07:21 -06:00
Gregory Nutt
a84bd3f433
M25P serial flash driver: Add subsector size of the M24P16 part. From Lazlo
2014-12-10 18:48:36 -06:00
Gregory Nutt
cdc8fc52d1
SmartFS: Implements wear-leveling in the SmartFS. From Ken Pettit
2014-12-09 14:11:15 -06:00
Gregory Nutt
8bd5556b47
Fix compilation errors if CONFIG_DISABLE_MOUNTPOINT is selected
2014-12-08 07:14:31 -06:00
Gregory Nutt
c0c108d5e2
Add support for ST Micro EEPROM device geometries. From Sebastien Lorquet
2014-12-05 09:13:34 -06:00
Gregory Nutt
3cc6bee189
Nucleo-f4x1re: Fix some joystick pin definitions
2014-12-04 12:04:21 -06:00
Gregory Nutt
1f2447502f
SAMA5D3 Xplained: Add support for the Itead Joystick shield
2014-12-03 12:24:23 -06:00
Gregory Nutt
19d31412f7
Update/correct some comments
2014-11-29 07:08:30 -06:00
Gregory Nutt
2b8fe6709b
Add an analog joystick driver. Initial checkin is only a little more of a clone of the discrete joystick driver and is as-of-yet untested
2014-11-28 19:59:27 -06:00
Gregory Nutt
24d4253e1f
Fixes to get the discrete joystick driver and test working
2014-11-28 15:56:18 -06:00
Gregory Nutt
544322edb9
DJoystick: Add a new ioctl to get the support joystick discrete signals
2014-11-28 15:39:57 -06:00
Gregory Nutt
0d04a4e9ba
Fix missing quote in Kconfig
2014-11-28 10:16:58 -06:00
Gregory Nutt
e42f7b552f
This commit is a set of patches 02/11 through 03/11 correcting issues with the CC3000 networking (01/11 was committed separated). Among these 10 patches:
...
03/11: CC3000 driver was getting stuck at recv() when remote host closed connection and application tried to read data from remotely shutdown socket. This patch adds proper handling for remotely closed socket event.
07/11: Socket state initialization was done in 'register', while it should be initialized in 'open' and deinitialized in 'close'. Old way caused problems when device is closed, power-cycled and then reopened as old socket state was left enabled.
08/11: Select thread was getting stuck after 'close, power-cycle, reopen', since selectsem was not properly setup and cleaned up.
09/11 'maxFD' was not properly reset in select worker and not checked for before calling cc3000_select().
10/11: After wlan_stop()/cc3000_close(), irqsem was left with count '-1'. Therefore on next wlan_start()/cc3000_open(), initial value for irqsem was wrong. Additional repeated wlan_start()/wlan_stop() decreased irqsem value further. Obviously this causes driver not to function correctly and freeze.
Patch moves initialization and destruction of waitsem, irqsem and readysem to cc3000_open/cc3000_close.
All are: Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com>
2014-11-28 08:52:52 -06:00
Gregory Nutt
5f0343bed9
Use usleep instead of usdelay as CONFIG_BOARD_LOOPSPERMSEC might not be calibrated correctly and CC3000 is fine with longer wait.
...
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com>
2014-11-28 08:16:30 -06:00
Gregory Nutt
2d9bd07525
Some additional, minor improvements to djoystick interrupt controls
2014-11-27 20:20:10 -06:00
Gregory Nutt
0ec5043a4e
Add an interface definition and upper half driver for a discrete joystick device
2014-11-27 17:42:16 -06:00
Gregory Nutt
57e57bba36
LPC4357 EVB: Ooops got sense of the LED GPIO backward
2014-11-27 12:38:04 -06:00
Gregory Nutt
f2603866e0
Widen the name space: Rename CONFIG_SPI_EEPROM to CONFIG_EEPROM so that I2C EEPROMs can live there too
2014-11-27 11:08:27 -06:00
Gregory Nutt
e3898a7911
Update README
2014-11-27 10:40:51 -06:00
Gregory Nutt
d5c808c1fe
EEPROM: Add a README file
2014-11-27 09:14:19 -06:00
Gregory Nutt
bc3212d70e
EEPROM: Add a README file
2014-11-27 09:14:00 -06:00
Gregory Nutt
d8107d2b97
Loop device should return -EINTR is interrupt by a signal
2014-11-27 09:12:15 -06:00
Gregory Nutt
b29925a63b
EEPROM: prevent writes past end of device. From Sébastien Lorquet
2014-11-27 07:59:43 -06:00
Gregory Nutt
3f2c90c1e9
Fix minor typo in C comments
2014-11-27 06:49:07 -06:00
Gregory Nutt
1a33afb66c
Fix to get a clean build with EEPROM support disabled
2014-11-26 15:37:01 -06:00
Gregory Nutt
40b27115cc
Add support for generic EEPROM access via a character driver. Add also the EEPROM driver itself. From Sebastien Lorquet
2014-11-26 13:55:34 -06:00
Gregory Nutt
9ac09db800
More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs.
2014-11-25 13:46:14 -06:00
Gregory Nutt
2994448d85
More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs.
2014-11-25 13:15:09 -06:00
Gregory Nutt
5d231b25f0
SAMA5D3 Xplained: Add an apps/examples/bridge configuration
2014-11-20 16:24:30 -06:00
Gregory Nutt
33627632a5
Network: Fix compilation problem when mutliple networks enabled
2014-11-17 10:22:30 -06:00
Gregory Nutt
b9cd425bc2
Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU in all drivers/net (except slip.c)
2014-11-16 08:53:20 -06:00
Gregory Nutt
25a9005ce7
Remove use of NET_LL_HDRLEN from Ethernet drivers. Use ETH_HDRLEN instead
2014-11-15 09:05:34 -06:00
Gregory Nutt
2b758537ea
Network: Misc fixes for clean complete with both Ethernet and SLIP enabled
2014-11-15 08:55:50 -06:00
Gregory Nutt
388ef8db1a
Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday
2014-11-15 08:22:51 -06:00
Gregory Nutt
8d00912207
Add mirror (x/y) and inverse video (black<->white) options to the ST7565 LCD driver. From Pierre-noel Bouteville.
2014-11-15 06:43:12 -06:00
Gregory Nutt
ebdff66c8b
ARP: Add support for the case where there are multiple networks: One being Etherenet and the other not (say slip or perhaps someday PPP). In that case, we need to suppress ARP-related operations on the SLIP/PPP interface only
2014-11-14 18:25:33 -06:00
Gregory Nutt
e03c764d92
I don't think that the net_route function has ever worked correctly. The source ip was updated in the match struct instead of the route ip. From Brennan Ashton.
2014-11-14 16:45:25 -06:00
Gregory Nutt
ca15802ae5
Trival fix to comment
2014-11-14 10:58:13 -06:00
Gregory Nutt
9f3d4b30fb
Add st7565.c to build
2014-11-14 06:55:16 -06:00
Gregory Nutt
3576e249b5
Add driver for ST7565 that works with NHD‐C12864KGZ display. From Pierre-noel Bouteville.
2014-11-13 16:03:52 -06:00
Gregory Nutt
c956d6d820
Add support for seeking in BCH. From Sébastien Lorquet.
2014-11-13 09:04:42 -06:00
Gregory Nutt
d9b238b002
Extend MTD support to M25P16. From Sébastien Lorquet
2014-11-07 10:35:03 -06:00
Gregory Nutt
b99db64f15
rwbuffer, fix compiler error
2014-11-05 15:26:48 -06:00
Gregory Nutt
5120d745fd
Fix some typos
2014-10-29 10:48:50 -06:00
Gregory Nutt
6c9f325e1e
Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS
2014-10-27 11:31:16 -06:00
Gregory Nutt
0196b77961
EFM32: Add IDLE power management hooks. Nothing implemented; just define the hooks
2014-10-22 07:26:31 -06:00
Gregory Nutt
37e08c3b49
The olimex-efm32g880f128-stk now defaults to use LEUART1 as the serial console. Also fixes lots of compile bugs from the original LEUART checkin
2014-10-21 11:38:51 -06:00
Gregory Nutt
d13c9a08b9
EFM32: Add configuration support for LEUARTs
2014-10-21 09:37:02 -06:00
Gregory Nutt
fa3753c466
rivers: enable usage of ili9341
...
This enables build and configuration of the ili9341 lcd interface driver.
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-10-20 15:27:56 -06:00
Gregory Nutt
beff697bc7
drivers: implements lcd interface for ili9341
...
This implements the lcd interface to displaying data on the lcd display powered
by the ili9341 lcd driver.
This driver implements all methods defined in the lcd_dev_s structure except
getcontrast and setcontrast. They are not supported by the hardware.
Furthermore the driver allows to use multiple displays powered by the ili9342 IC
with only one driver instance. So it is theoretically possible to support more
than one connected ili9341 lcd display. The displays can be configured
independently. Currently two lcd devices supported. This should be enough for
now. Read the corresponding code section of how to add more devices if
neccessary.
The following settings are configurable:
1. Pixel format
Define the pixel format of the connected display. Currently only
RGB-565 supported.
2. Orientation
Define the orientation of the display. This can be portrait or
landscape and reversed values.
1. Write only
The driver allows to disable any getrun method if not neccessary to
reduce code size. This is done by enable CONFIG_LCD_NOGETRUN in the nuttx
configuration.
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-10-20 15:19:43 -06:00
Gregory Nutt
1a27a4d4c0
Eliminate warnings
2014-10-11 17:02:35 -06:00
Gregory Nutt
c38b81431f
Cosmetic updates to comments
2014-10-11 15:20:21 -06:00
Gregory Nutt
d7d759f7a7
Update everything under nuttx/drivers to use the corrected syslog interfaces
2014-10-08 10:18:58 -06:00
Gregory Nutt
b33f8b3013
MTD read-ahear/write buffering layer seems functional
2014-09-25 13:35:10 -06:00
Gregory Nutt
a5bc26db4a
Fixes for compile of rwbuffer.c
2014-09-25 11:02:30 -06:00
Gregory Nutt
7c89724b99
A few fixes for clean apps/examples/mtdrwb build
2014-09-25 10:41:47 -06:00
Gregory Nutt
6626f62b08
In at45db_bwrite, the buffer is not increased when writing more than 1 page. Sourceforge bug #34
2014-09-25 06:48:04 -06:00
Gregory Nutt
34a057334c
Update SMART FS procfs support. From Ken Pettit
2014-09-22 11:19:49 -06:00
Gregory Nutt
b37c0a832a
Fixes to avoid some hang conditions using STM32 CAN
2014-09-17 08:35:03 -06:00
Gregory Nutt
47d55c28dc
Mostly cosmetic changes
2014-09-04 10:28:38 -06:00
Gregory Nutt
23147c40a5
Remove final traces of the 8015 from the NuttX source tree
2014-09-01 13:21:15 -06:00
Gregory Nutt
205260d5e2
Reanem kzalloc to kmm_zalloc for consistency
2014-08-31 17:34:44 -06:00
Gregory Nutt
1780810d3d
Rename kmalloc to kmm_malloc for consistency
2014-08-31 17:26:36 -06:00
Gregory Nutt
54fa3b0b59
Rename kfree to kmm_free for consistency with other naming conventions
2014-08-31 17:04:02 -06:00
Gregory Nutt
9cd1ddada4
Rename kmemalign to kmm_memalign and krealloc to kmm_realooc for consistency with other naming
2014-08-31 15:27:37 -06:00
Gregory Nutt
2906ff6a4a
Cosmetic: Fix all comments, defaults, etc. that references the defunct name user_start
2014-08-30 11:14:51 -06:00
Gregory Nutt
e3ff0689bb
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
2014-08-29 14:47:22 -06:00
Gregory Nutt
98cf3b06e5
nuttx/drivers: Remove explicity references to errno. That is a problem from within the kernel for certain configurations
2014-08-28 16:59:06 -06:00
Gregory Nutt
ad9b3f8ab8
wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide.
2014-08-21 11:16:55 -06:00
Gregory Nutt
cf242fbeb4
SAM4E-EK: Add ILI9341-based LCD driver
2014-08-20 11:45:01 -06:00
Gregory Nutt
004788d7c0
Change the way PHY interrupts work: disable automatically. Then we have to re-subscribe each time after the interrupt fires
2014-08-17 16:51:56 -06:00
Gregory Nutt
7cc93b708a
SAMA5 PHY: Add more debug instrumentation; Fix logic that would be used to disable PHY interrupts
2014-08-17 14:07:53 -06:00
Gregory Nutt
e04ab2bcfc
In order to get PHY interrupts, they must be enabled at the PHY (still don't get PHY interrupts)
2014-08-17 13:03:18 -06:00
Gregory Nutt
eb5e2e4b20
Finishes the ioctl definition to subscribe to PHY events. Revamp network ioctl signature to support arguments other than struct mii_ioctl_data.
2014-08-16 14:08:04 -06:00
Gregory Nutt
8428a58bdc
Add support for an ioctl that can be used to notify an application when there is a change in the network status signalled by a PHY interrupt
2014-08-16 12:56:02 -06:00
Gregory Nutt
4beb3c0ad7
Move SLIP prototypes from net.h to new slip.h
2014-08-16 10:23:17 -06:00
Gregory Nutt
c52f634b79
Standardize a PHY interrupt attachment interface
2014-08-16 08:34:36 -06:00
Gregory Nutt
320707fdfa
SAMA5: Fix bugs in timer/counter interrupts and one-shot timer
2014-08-10 10:47:38 -06:00
Gregory Nutt
a3e28c2c16
audio NULL driver: Fix an error in a variable name
2014-08-09 10:33:31 -06:00
Gregory Nutt
6e0acd7cd4
WM8904: Don't use MSEC2TICK in timeout calculation
2014-08-08 11:02:45 -06:00
Gregory Nutt
c9661ad5a7
Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors
2014-08-07 18:00:38 -06:00
Gregory Nutt
bb29ba0a00
Costmetic changes
2014-08-05 10:03:29 -06:00
Gregory Nutt
8065ab73a4
WM8904: Add reset logic to put the part back in its initial state after playing each WAV file. Base samles per second on frame length, not bits-per-sample. Use a different frame length for 8-bit and 16-bit data
2014-08-04 19:26:43 -06:00
Gregory Nutt
dc8b040573
WM8904: Correct calculation of bitrate (I am not sure why this is correct). LR clock divisor is now a constant 32-bits per frame. Conditioned out interrupt logic; it is not being used. Also added some FLL lock interrupt/poll logic (which was subsequently disabled).
2014-08-04 15:08:20 -06:00
Gregory Nutt
c68e42c437
WM8904: Restore mystery bit in setup that was accidentally tossed before
2014-08-03 19:29:02 -06:00
Gregory Nutt
678c0aac8d
WM8904: Tried disabling the SYSCLK while updating the FLL. Didn't help but is still probably a correct change
2014-08-03 18:44:51 -06:00
Gregory Nutt
72b739fbcb
WM8904: Add logic to analyze BCLK setup
2014-08-03 17:11:38 -06:00
Gregory Nutt
b9384ced60
WM8904: Various updates to get BCLK/LRCLK correct. Acutally worse the parent, but I think is on the right track
2014-08-03 13:28:20 -06:00
Gregory Nutt
b0d0ac72a7
WM8904 driver: Disable the FFL at the end of playing.
2014-08-02 14:28:10 -06:00
Gregory Nutt
a2d6c0c2b4
WM8904: Add logic to program the FLL to achieve the bitrate
2014-08-02 12:40:57 -06:00
Gregory Nutt
f4bc0ad99a
WM8904: Add an option to control WM8904 register dumping
2014-08-02 06:52:42 -06:00
Gregory Nutt
7e576e308a
WM8904 I2C: Fix an error in writing. I am not sure why this fixes the problem
2014-08-01 18:22:33 -06:00
Gregory Nutt
e59bb45b33
Add debug logic to dump WM8904 registers
2014-08-01 18:07:20 -06:00
Gregory Nutt
3e1e15b04a
WM8904: Can't reset the WM8904 unless we also reinitiailize all registers. Try to get a saner timeout based on sample rate, bits-per-sample, and buffer size.
2014-07-31 19:14:41 -06:00
Gregory Nutt
e214382264
Audio: Change how the end of the audio stream is detected by the leaf audio component. This used by be done by looking for the first partial buffer. That does not work with the in-place sub-sampling performed by the PCM decoder: That always reduces the size of the buffer so that all buffers only partially filled by the time they get to the leaf. Now, a flag is set in the audio buffer flags set to indicate the final buffer in the stream.
2014-07-31 16:36:09 -06:00
Gregory Nutt
487a672d76
WM8904: Was not saving i2s interface instance
2014-07-31 15:00:45 -06:00
Gregory Nutt
9c80dfb31c
Updated README file, cosmetic changes to comments and debug output
2014-07-30 10:19:09 -06:00
Gregory Nutt
be8fe9a311
Costmetic update to comments
2014-07-29 20:03:52 -06:00
Gregory Nutt
75daeb75a3
Fix some compile problems with the WM8904 driver due to recent audio subsystem changes
2014-07-28 16:33:25 -06:00
Gregory Nutt
c9f15ffd3d
PCM: First cut at fast forward by subsampling
2014-07-27 18:33:17 -06:00
Gregory Nutt
0cc9b06eca
Add definitions to support fast forward and rewind configuration
2014-07-27 12:25:40 -06:00
Gregory Nutt
014dd77237
Audio: Fix some compilation issues introduced with some of the recent changes
2014-07-25 11:27:29 -06:00
Gregory Nutt
08fa9a9d54
Costmetic change
2014-07-25 10:04:20 -06:00
Gregory Nutt
0399be55d3
Fix some compile errors when audio DEBUG is enabled
2014-07-24 15:05:13 -06:00
Gregory Nutt
22f8503d0a
Convert ac_format and ac_controls to unions to make access a little cleaner
2014-07-24 10:21:04 -06:00
Gregory Nutt
dba43a9c75
Audio: Get rid of the decoder->driver IOCTLs that I added a couple of commits back; Use existing configure method
2014-07-24 09:56:39 -06:00
Gregory Nutt
e100726a41
Fix a type in the audio Kconfig file, UDIO->AUDIO
2014-07-23 14:48:21 -06:00
Gregory Nutt
72133f5d95
Add ioctls so that PCM decoder can configure the driver bitrate, num channels, and sample width
2014-07-23 12:21:04 -06:00
Gregory Nutt
516b343666
Flesh out missing PCM decoder methods
2014-07-23 11:58:43 -06:00
Gregory Nutt
ca7d7c34ce
Audio: Add a NULL audio device that can be used to simply unit-level testing of audio decoders
2014-07-23 10:12:32 -06:00
Gregory Nutt
cfa76b5278
Flesh out a few more PCM methods, still incomplete. Re-vision PCM structure definition
2014-07-22 19:23:05 -06:00
Gregory Nutt
d7a9633dcd
Rename pcm_decode.h to pcm.h since it will hold more than just decoding definitions. Fix some porting errors like idbg should auddbg, etc. Add wav file header and a few low-level wav utilities.
2014-07-22 15:54:56 -06:00
Gregory Nutt
8548c64915
Remove WM8904 driver unused paramters, clean-up comments, remove some kruft in capability reporting
2014-07-22 11:47:27 -06:00
Gregory Nutt
05e82d4f01
Add missing configuration option to select the MAX11802 touchscreen controller
2014-07-22 07:09:48 -06:00
Gregory Nutt
0b3ff976ff
Fix an error in SLIP escaping
2014-07-22 06:55:42 -06:00
Gregory Nutt
78d7925ce0
Kconfig: MW8904 driver no longer depends on EXPERIMENTAL (it probably still should)
2014-07-20 10:27:25 -06:00
Gregory Nutt
f4bcb730d2
WM8904 w/NxPlayer: Fix some compile errors and warnings with debug enabled
2014-07-20 09:17:36 -06:00
Gregory Nutt
4f6625380b
The WM8904 audio driver is mostly code complete and ready to begin initial testing
2014-07-19 18:52:58 -06:00
Gregory Nutt
6d9f9e37bf
SAMA5D4-EK: Add WM8904 initialization logic
2014-07-19 11:58:53 -06:00
Gregory Nutt
89ed7ab558
WM8904: Add initialization logic
2014-07-19 10:20:19 -06:00
Gregory Nutt
3b8c4a399d
Framework for a WM8904 audio driver. The initial driver check-in is simply Ken Pettit's VS1053 driver forced to compile with only WM8904 definitions
2014-07-18 15:35:12 -06:00
Gregory Nutt
1ff0536c7f
WM8904: Add header file support for this forcoming driver
2014-07-18 13:28:51 -06:00
Gregory Nutt
cc09d75180
MXT driver: Fix error in thread test... backward logic
2014-07-16 22:13:41 -06:00
Gregory Nutt
44e6516213
maXTouch: Add thresholding so that MOVE reports are not generated unless there is a significant change in the reported position
2014-07-12 14:00:33 -06:00
Gregory Nutt
4548ea731e
maXTouch: Fix error in state machine
2014-07-12 11:23:07 -06:00
Gregory Nutt
58ab6ec03f
NX graphics library: Macroize some color operators that become trivial when there is only one color plane
2014-07-12 07:44:56 -06:00
Gregory Nutt
3042fc5bc0
Missing closing quote in Kconfig file
2014-07-11 16:51:50 -06:00
Gregory Nutt
e91704c432
Minor Kconfig improvements
2014-07-11 16:25:35 -06:00
Gregory Nutt
ab1ab379dd
Addition rwbuffer interfaces should not be enabled unless they are needed; if rwbuffer support is enabled, it should not be unconditionally enabled in SMART and FTL
2014-07-11 16:19:17 -06:00
Gregory Nutt
8516551e54
Add an MTD layer that will add read-ahead or write buffering to any MTD driver (incomplete)
2014-07-11 11:20:11 -06:00
Gregory Nutt
f97113c5ef
SAMA5D4-EK: The maXTouch controller and test is now enabled by default in the NSH configuration
2014-07-10 08:42:25 -06:00
Gregory Nutt
3b0a797216
MXT driver works
2014-07-10 07:16:38 -06:00
Gregory Nutt
22fbcbb852
MXT driver is now at least partially functional
2014-07-09 18:56:53 -06:00
Gregory Nutt
e9362128bd
SAMA5 TWI: Add support for up_i2creset
2014-07-09 09:51:28 -06:00
Gregory Nutt
0da9aaeb09
Fix some recurring typos: postion->position, *atino->*ation
2014-07-08 13:12:36 -06:00
Gregory Nutt
25f419d487
MXT Driver: Make sure that all return values are checked: Fix worker thread -- it must hold the MXT device semaphore to access I2C
2014-07-08 08:55:43 -06:00
Gregory Nutt
ab8506163a
maXTouch: Fix some issues with interrupt handling
2014-07-07 13:25:20 -06:00
Gregory Nutt
5bbc0a0dd9
maXTouch: Check for successful memory allocation was backward
2014-07-07 09:55:39 -06:00
Gregory Nutt
0d14befb88
SAM3/4: Fix compile of sam_aes.c if CONFIG_CRYPTO_AES is defined. rom Max Nekludov
2014-07-07 08:03:18 -06:00
Gregory Nutt
dc7bcb0c1d
BCH: Add configurable AES encryption support to block-to-character (BCH) driver. This allows any block device to be accessed as an encrypted character device. From Max Nekludov
2014-07-07 08:00:00 -06:00
Gregory Nutt
09d0e2bdd2
maXTouch: Be consistent. Failure return values are not just non-zero, but negative
2014-07-06 09:08:38 -06:00
Gregory Nutt
4afc23d16d
maXTouch: Fix test of I2C_TRANSFER return value
2014-07-06 08:51:38 -06:00
Gregory Nutt
b4d3cebc2f
maXTouch: Fix I2C address, errors when debug enable, reorganize some data
2014-07-06 08:03:34 -06:00
Gregory Nutt
c5fc24e110
NET: Standardize naming of all protocal header lengths
2014-07-05 13:04:48 -06:00
Gregory Nutt
c2fc299332
Forgot to add a file in the last commit
2014-07-05 11:57:03 -06:00
Gregory Nutt
3e9f29ba07
Add very basic support for the Atmel maXTouch touchscreen controller
2014-07-05 11:47:54 -06:00
Gregory Nutt
60246e613b
NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed.
2014-07-04 19:13:08 -06:00
Gregory Nutt
0bb153b8cb
Remove all inclusion of uip.h
2014-07-04 16:58:22 -06:00
Gregory Nutt
a6b39d1879
NET: in-progress change... don't use
2014-07-04 16:38:51 -06:00
Gregory Nutt
cce35ce975
NET: More renaming
2014-07-04 15:40:49 -06:00
Gregory Nutt
b732388fcb
TSC2007: Cosmetic updates
2014-07-04 15:03:41 -06:00
Gregory Nutt
b36b29b4c3
SMARTFS: Increase some variables from uint16_t to uint32_t to handle larger device sizes. From Ken Pettit
2014-07-04 07:28:12 -06:00
Gregory Nutt
f881abe2da
Fix for a bug that would show up if CONFIG_MTD_BYTE_WRITE was not selected and the SMART sector size was larger than the mtd device's block size (like it would be if using SMARTFS on larger flash devices). From Ken Pettit
2014-07-03 18:14:51 -06:00
Gregory Nutt
8e9df8ade0
NET: Misc naming clean-up
2014-07-02 17:23:25 -06:00
Gregory Nutt
400edda109
NET: Rename XYZ_uiptxpoll to just XYZ_txpoll
2014-07-01 18:41:08 -06:00
Gregory Nutt
3b31e1ac80
SAMA5D4-EK: NSH configuration now has the RAMLOG enabled by default
2014-07-01 15:09:47 -06:00
Gregory Nutt
2630411332
RAMLOG: syslog_putc must set errno and return EOF on a failure
2014-07-01 15:09:07 -06:00
Gregory Nutt
3ee5b9209b
Rename CONFIG_RAMLOG_CONSOLE_BUFSIZE to just CONFIG_RAMLOG_BUFSIZE
2014-07-01 12:00:40 -06:00
Gregory Nutt
77330679d4
NET: Rename uip_mss to tcp_mss
2014-06-30 19:09:23 -06:00
Gregory Nutt
b0c1b7ef47
Rename uip_poll->devif_poll and uip_timer->devif_timer
2014-06-30 18:40:41 -06:00
Gregory Nutt
da7379ed18
Rename uip_input to devif_input
2014-06-30 18:11:17 -06:00
Gregory Nutt
dd8bb71cbc
Remove empty ADC write method. From Kosma Moczek
2014-06-30 07:55:28 -06:00
Gregory Nutt
f1dcb6674a
Extend erase block size to 18-bits in order (decrease block size to 14-bits) to handle parts with large erase blocks. From Kosma Moczek
2014-06-30 07:52:57 -06:00
Gregory Nutt
ed1aa8c594
E1000: Rename uip_dev to netdev
2014-06-29 13:03:19 -06:00
Gregory Nutt
fce2a79abd
Rename uip_driver_s net_driver_s
2014-06-27 16:48:12 -06:00
Gregory Nutt
64ba574ecc
Move files to net/utils; make appropriate name changes, most for uip_lock to net_lock
2014-06-26 14:23:21 -06:00
Gregory Nutt
621097b6c8
Rename ip_eth_hdr to eth_hdr_s
2014-06-25 09:57:52 -06:00
Gregory Nutt
5d1f8180d4
Move the remaining files from include/nuttx/net/uip to include/nuttx/net; Rename *_internal.h header files in net/ to just *.h
2014-06-24 10:14:15 -06:00
Gregory Nutt
37646044ac
Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/netdev.h
2014-06-24 09:28:44 -06:00
Gregory Nutt
8b450d6d1b
SAMA5D4: Add EMAC driver
2014-06-11 12:23:31 -06:00
Gregory Nutt
6f9bcd321c
Config/build changes to better support the RTL8187
2014-06-09 09:11:04 -06:00
Gregory Nutt
2e08560fa0
Clear rxhead on disconnect to prevent data from being resent on re-connect
2014-06-06 10:34:58 -06:00
Gregory Nutt
90e4b55e0c
Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/arp.h; rename all uip_arp_ functions to arp_
2014-05-30 12:13:06 -06:00
Gregory Nutt
6f3cb90c05
Cosmetic changes
2014-05-28 14:09:58 -06:00
Gregory Nutt
2abe0dd6dd
Change all variadic macros to C99 style
2014-05-22 09:01:51 -06:00
Gregory Nutt
2a509d560f
CC3000: Fix build when POLL is enabled. From Jussi Kivilinna.
2014-05-21 07:37:46 -06:00
Gregory Nutt
b584ecb967
CC3000: Fix a race condition in start-up of unsoliced_thread. From Jussi Kivilinna
2014-05-21 07:32:32 -06:00
Gregory Nutt
b2d26436de
Configuration has CC3000_SPI_MODE settings but source uses CONFIG_CC3000_SPIMODE. From Jussi Kivilinna
2014-05-21 07:20:09 -06:00
Gregory Nutt
a9d89b5442
Correct SPI mode for CC3000 is CPOL=0 CHPA=1. From Jussi Kivilinna
2014-05-21 07:17:46 -06:00
Gregory Nutt
c48bd737d0
SAM4E-EK: Add a driver for the on-board LCD (not tested on initial check-ing)
2014-05-13 10:38:46 -06:00
Gregory Nutt
ddf151c226
A fix to the last MB85RS1MT patch
2014-05-12 21:42:06 -06:00
Gregory Nutt
e3373aaf39
Add support for Fujitsu MB85RS1MT part. From Charles Ash
2014-05-12 18:43:06 -06:00
Gregory Nutt
b5efb9dd77
Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna
2014-05-08 09:01:14 -06:00
Gregory Nutt
7594d8b8cf
Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna
2014-05-08 09:00:33 -06:00
Gregory Nutt
35e94a5be4
LIS331DL driver: Correct build dependency. Sourceforge ticket #41 from Kosma Moczek
2014-05-08 07:39:10 -06:00
Gregory Nutt
f06e9dbcaa
Timer driver updates from Bob Doiron
2014-05-05 14:40:19 -06:00
Gregory Nutt
d897b4de76
Enhanced timer interface from Bob Doiron
2014-04-30 14:08:34 -06:00
Gregory Nutt
020583efa2
drivers/mtd/w25.c: Add support for the 8Mbit W25Q80BV part. From Mark Whitehorn.
2014-04-30 13:31:42 -06:00
Gregory Nutt
d119e4c977
Update TODO list and comments
2014-04-23 13:02:00 -06:00
Gregory Nutt
465bfcb4cf
Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few)
2014-04-22 13:42:38 -06:00
Gregory Nutt
972c4cbab5
Nucleo F401RE: Remove PX4 cruft that can in with the port
2014-04-22 12:18:08 -06:00
Gregory Nutt
5df14c7d40
Misc changes to get a clean compilation after incorporating all of Bob Doison's changes
2014-04-22 10:38:08 -06:00
Gregory Nutt
61555fe5e1
Various SAM4S related fixes, mostely related to the timer driver driver and the SAM4S timer/counter. All from Bob Doisin
2014-04-22 09:01:20 -06:00
Gregory Nutt
df33d9bcc8
examples/serialrx added by Bob Doison
2014-04-22 08:40:48 -06:00
Gregory Nutt
3884117ae9
Missing watchdog timer configuration setting
2014-04-21 19:13:21 -06:00
Gregory Nutt
5d7da97a35
SDIO-based MMC/SD improvements from Bob Doiron
2014-04-21 17:15:42 -06:00
Gregory Nutt
9485fbf66e
SAM3/4 Interrupt initialization. Default interrupt priority not being set correctly
2014-04-17 14:02:22 -06:00
Gregory Nutt
b83702dd8a
HID mouse: Don't include NAKs in error count. From Leo
2014-04-17 11:47:00 -06:00
