armv8-m/arm_securefault.c:69:3: warning: implicit declaration of function 'syslog_flush'; did you mean 'syslog_like'? [-Wimplicit-function-declaration]
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
This small fix ensures all DMA pointers are correctly reseted during
DMA setup (when the driver is opened). Without this there could be rare
occurrence of driver pointer to incorrect (invalidate) DMA buffer and thus
saving incorrect characters to upper layer.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Circular buffer does not use DMA linked list therefore function
sam_freelinklist() cannot be called as it would fail on assertion (csa
not defined). Peripheral that calls DMA should care of buffer invalidation
instead.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Port based on arch/arm/nrf53.
Modem not fully supported yet. At the moment, initialization and AT interface work.
Sockets and GNSS interface will be added later.
CONFIG_ARM_TOOLCHAIN_GNU_EABI build got broken when -mthumb option was moved
from ARCHCPUFLAGS to ARCHOPTIMIZATION variable:
arm-none-eabi-ld: error: .../build/nuttx/nuttx uses VFP register arguments, /usr/lib/gcc/arm-none-eabi/5.4.1/libgcc.a(_fixunsdfdi.o) does not
arm-none-eabi-ld: failed to merge target specific data of file /usr/lib/gcc/arm-none-eabi/5.4.1/libgcc.a(_fixunsdfdi.o)
arm-none-eabi-ld: error: .../build/nuttx/nuttx uses VFP register arguments, /usr/lib/gcc/arm-none-eabi/5.4.1/libgcc.a(_udivmoddi4.o) does not
arm-none-eabi-ld: failed to merge target specific data of file /usr/lib/gcc/arm-none-eabi/5.4.1/libgcc.a(_udivmoddi4.o)
since symbols defined in arch/elf.h is also used in other case, for example:
CC: pthread/pthread_testcancel.c machine/arm/gnu_unwind_find_exidx.c:32:8: error: unknown type name '__EIT_entry'
32 | static __EIT_entry *__exidx_start_elf;
| ^~~~~~~~~~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
The following macros
__ARCH_ARM_SRC_STM32F7_HARDWARE_STM32F74XX75XX_FLASH_H
__ARCH_ARM_SRC_STM32L4_HARDWARE_STM32L4X6XX_RCC_H
are used in other header files.
Signed-off-by: Mingjie Shen <shen497@purdue.edu>
USBD has many limitation that make it hard to work properly:
- only one EasyDMA channel which must be shared for all EPs
- only one DMA transfer can take place at a time
- some registers are unavailable during DMA transfer
- in case of any problems, the peripheral silently blocks,
or lose the transmitted bytes without information for the user
This commit is trying to fix these problem and makes the USBS stack more reliable.
Tested with high-speed CDCACM data transfers and that's the best I've been able to get in terms of stability.
This is preparation to use kernel stack for everything when the user
process enters the kernel. Now the user stack is in use when the user
process runs a system call, which might not be the safest option.
CortexR52 can have a optional FPU.
- VFPv3 with FP16
- Option 1: 16 x double-prevision registers - -mfpu=vfpv3-d16-fp16
- Option 1: 32 x double-prevision registers - -mfpu=vfpv3-fp16
Basic work required for uniprocessor CortexR52 (ARMv8R AARCH32) using
GICv3 and CP15 mapped arch timer.
Tested on ARM FVP 11.20.
Port is based on ARMv8R AARCH64 and ARMv7R code. Excuse possible copy-paste leftovers.
Add an interface that validate if EasyDMA transfer is possible.
EasyDMA cannot access flash memory which can cause hard to detect silent bugs.
This feature is enabled if CONFIG_DEBUG_FEATURES=y and CONFIG_DEBUG_ASSERTIONS=y.
Confirmation of the IN request must be done immediately after all data has been transferred,
otherwise sending data when more than one request has been added to the queue will
not work properly.
- Update TrustedFirmare-M instructions to latest version of STM32CubeL5
- Increase idle thread stack size to not overflow during system init
- Select ARCH_HAVE_TRUSTZONE for STM32L5
- Set CONFIG_ARCH_TRUSTZONE_NONSECURE for stm32l562e-dk:nsh, since NuttX
is running in the Non-secure world.
See https://github.com/apache/nuttx/issues/9316
Signed-off-by: Michael Jung <michael.jung@secore.ly>
SAMv7 QSPI peripheral does not copy-in/out directly into/from
user provided buffer, but use a dedicated memory that is interfaces
using byte copy. The QSPI command buffer can point to memory with
any alignment
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Some chips only have one core that supports secure in smp mode,
so need change EXC_RETURN to non-secure when switching to a core that
does not support secure.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Notify the compiler that the condition flag has changed to prevent the
compiler from optimizing and reordering instructions, which may cause exceptions.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
to avoid the infinite recusive dispatch:
*0 myhandler (signo=27, info=0xf3e38b9c, context=0x0) at ltp/testcases/open_posix_testsuite/conformance/interfaces/sigqueue/7-1.c:39
*1 0x58f1c39e in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:167
*2 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*3 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf4049334) at signal/sig_dispatch.c:115
*4 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf4049334) at signal/sig_dispatch.c:435
*5 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*6 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
*7 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*8 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf4049304) at signal/sig_dispatch.c:115
*9 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf4049304) at signal/sig_dispatch.c:435
*10 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*11 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
*12 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*13 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf40492d4) at signal/sig_dispatch.c:115
*14 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf40492d4) at signal/sig_dispatch.c:435
*15 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*16 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
*17 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*18 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf40492a4) at signal/sig_dispatch.c:115
*19 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf40492a4) at signal/sig_dispatch.c:435
*20 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*21 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
*22 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*23 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf4049274) at signal/sig_dispatch.c:115
*24 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf4049274) at signal/sig_dispatch.c:435
*25 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*26 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
*27 0x58fa0664 in up_schedule_sigaction (tcb=0xf4e20f40, sigdeliver=0x58f1bab5 <nxsig_deliver>) at sim/sim_schedulesigaction.c:88
*28 0x58f19907 in nxsig_queue_action (stcb=0xf4e20f40, info=0xf4049244) at signal/sig_dispatch.c:115
*29 0x58f1b089 in nxsig_tcbdispatch (stcb=0xf4e20f40, info=0xf4049244) at signal/sig_dispatch.c:435
*30 0x58f31853 in nxsig_unmask_pendingsignal () at signal/sig_unmaskpendingsignal.c:104
*31 0x58f1ca09 in nxsig_deliver (stcb=0xf4e20f40) at signal/sig_deliver.c:199
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Make low/full speed devices work with EHCI while OHCI is disabled. A
high speed USB hub has to be plugged into the root hub. This change
will also allow the optional use of a full speed hub between the
high speed hub and the low/full speed device. A recursive mutex is
used to avoid deadlocks.
Devices connected to the same USB bus should have unique function addresses.
This was not true for root hubs with multiple ports. After this change,
enumeration is more reliable on the sama5d3-xplained board when both root hub
ports are used.
This change amounts to using one usbhost_devaddr_s object per root hub
instead of one per root hub port. For the majority of boards only one
root hub port is available so no change in behavior should be expected.
These series have the following GPIO ports:
- STM32F03X: A to D, and F
- STM32F05/07/09X: A to F
- STM32G0X: A to F
- STM32L0X: A to E, and H
Signed-off-by: Takumi Ando <t-ando@advaly.co.jp>
If the CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE is enabled and the
card is found to be ready in the waitenable call. Then
we do not need a Watchdog nor to configure the pin for
IRQ to detect ready.
This was reported as an error, and it is not, it simply means
we do not have to wait.
The following message is printed continuously and the nsh
shell is unusable on sama5d3-xplained.
"OHCI ERROR: Unhandled interrupts pending: 000001". This
happens when a keyboard is removed and reinserted on
port3 (lower port) while a bluetooth dongle is in port2.
in SMP, signal processing cannot be nested, we use xcp.sigdeliver to identify whether there is currently a signal being processed, but this state does not match the actual situation
One possible scenario is that signal processing has already been completed, but an interrupt occurs, resulting in xcp.sigdeliver not being correctly set to NULL,
At this point, a new signal arrives, which can only be placed in the queue and cannot be processed immediately
Our solution is that signal processing and signal complete status are set in the same critical section, which can ensure status synchronization
Signed-off-by: hujun5 <hujun5@xiaomi.com>
1. Get the value of sp from dump regs when an exception occurs,
to avoid getting the value of fp from up_getsp and causing
incomplete stack printing.
2. Determine which stack the value belongs to based on the value
of SP to avoid false reports of stack overflow
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
CURRENT_REGS may change during assert handling, so pass
in the 'regs' parameter at the entry point of _assert.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Unplugging a USB device from an OHCI root hub will cause
a deadlock if DRVR_EPFREE is called from sam_rhsc_bottomhalf. A
typical call chain looks like this: sam_rhsc_bottomhalf->
CLASS_DISCONNECTED->usbhost_destroy->DRVR_EPFREE. In this case
DRVR_EPFREE tries to lock a locked mutex. A recursive mutex
prevents this deadlock.
This commit adds deifiniton of get_timer_period() and adj_timer_period()
functions used by adjtime() interface.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Store the old environment in a local context so another temporary address
environment can be selected. This can happen especially when a process
is being loaded (the new process's mappings are temporarily instantiated)
and and interrupt occurs.
When l2cc is already in disable state, performing a disable operation
again will flush incorrect cache data to memory
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Invalidate operations at DDI0246H_l2c310_r3p3_trm:
If there is a stale entry in the L2 cache, the system enables the invalidation of
the L1 cache. But before the controller invalidates the L2 cache, it allocates a
line from the L2 cache to an L1 cache.
The robust code sequence for invalidation with a non-exclusive cache arrangement is:
1. InvalLevel2 Address ; forces the address out past level 2
2. CACHE SYNC ; Ensures completion of the L2 inval
3. InvalLevel1 Address ; This is broadcast within the cluster
4. DSB ; Ensure completion of the inval as far as Level 2.
This sequence ensures that, if there is an allocation to L1 after the L1 invalidation, the data
picked up is the new data and not stale data from the L2
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Summary:
- This commit applies the changes from imxrt
- See 3a4542f3c4
Impact:
- imx6 ethernet with d-cache
Testing:
- Tested with imx6_with_ar8031 (will be added later)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
minidump will backtrace failure when use C code to save user context,
because the stack push operation in C code can disrupt the stack information.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Pinmaps should not have contained GPIO_SPEED_xxx settings and
all pins should have had suffixes to allow any pins attributes to
be set. This is board dependent.
This change adds CONFIG_STM32L5_USE_LEGACY_PINMAP to allow for
lazy migration to using pinmaps with suffixes.
The work required to do this can be aided by running tools/stm32_pinmap_tool.py.
The tools will take a board.h file and a legacy pinmap and outut the required
changes that one needs to make to a board.h file.
Eventually, CONFIG_STM32L5_USE_LEGACY_PINMAP will be deprecated and the legacy
pinmaps removed from NuttX.
Any new boards added should set CONFIG_STM32L5_USE_LEGACY_PINMAP=n and
fully define the pins in board.h
Pinmaps should not have contained GPIO_SPEED_xxx settings and
all pins should have had suffixes to allow any pins attributes to
be set. This is board dependent.
This change adds CONFIG_STM32WB_USE_LEGACY_PINMAP to allow for
lazy migration to using pinmaps with suffixes.
The work required to do this can be aided by running tools/stm32_pinmap_tool.py.
The tools will take a board.h file and a legacy pinmap and outut the required
changes that one needs to make to a board.h file.
Eventually, CONFIG_STM32WB_USE_LEGACY_PINMAP will be deprecated and the legacy
pinmaps removed from NuttX.
Any new boards added should set CONFIG_STM32WB_USE_LEGACY_PINMAP=n and
fully define the pins in board.h
Pinmaps should not have contained GPIO_SPEED_xxx settings.
This is board dependent.
This change adds CONFIG_STM32F0G0L0_USE_LEGACY_PINMAP to allow for
lazy migration to using pinmaps without speeds.
The work required to do this can be aided by running tools/stm32_pinmap_tool.py.
The tools will take a board.h file and a legacy pinmap and outut the required
changes that one needs to make to a board.h file.
Eventually, CONFIG_STM32F0G0L0_USE_LEGACY_PINMAP will be deprecated and the legacy
pinmaps removed from NuttX.
Any new boards added should set CONFIG_STM32F0G0L0_USE_LEGACY_PINMAP=n and
fully define the pins in board.h
Pinmaps should not have contained GPIO_SPEED_xxx settings.
This is board dependent.
This change adds CONFIG_STM32L4_USE_LEGACY_PINMAP to allow for
lazy migration to using pinmaps without speeds.
The work required to do this can be aided by running tools/stm32_pinmap_tool.py.
The tools will take a board.h file and a legacy pinmap and outut the required
changes that one needs to make to a board.h file.
Eventually, CONFIG_STM32L4_USE_LEGACY_PINMAP will be deprecated and the legacy
pinmaps removed from NuttX.
Any new boards added should set CONFIG_STM32L4_USE_LEGACY_PINMAP=n and
fully define the pins in board.h
replace all GPIO_MODE_xxMHz with GPIO_MODE_2MHz provide GPIO_ADJUST_MODE
and add legacy pinmap
For the stm32F1 pinmaps should not have contained GPIO_MODE_50MHz settings
on all pins. Speed is board dependent.
This change adds CONFIG_STM32_USE_LEGACY_PINMAP to allow for
lazy migration to using pinmaps that can have the GPIO_MODE_xxMHz set.
The work required to do this can be aided by running tools/stm32_pinmap_tool.py.
The tools will take a board.h, and use all the defconfigs with the legacy
pinmap and output the required changes that one needs to make to a board.h
file.
Eventually, CONFIG_STM32_USE_LEGACY_PINMAP will be deprecated and the legacy
pinmaps removed from NuttX.
Any new boards added should set CONFIG_STM32_USE_LEGACY_PINMAP=n and
fully define the pins in board.hf1
Pinmaps should not have contained GPIO_SPEED_xxx settings.
This is board dependent.
This change adds CONFIG_STM32_USE_LEGACY_PINMAP to allow for
lazy migration to using pinmaps without speeds.
The work required to do this can be aided by running tools/stm32_pinmap_tool.py.
The tools will take a board.h file and a legacy pinmap and outut the required
changes that one needs to make to a board.h file.
Eventually, STM32_USE_LEGACY_PINMAP will be deprecated and the legacy
pinmaps removed from NuttX.
Any new boards added should set STM32_USE_LEGACY_PINMAP=n and
fully define the pins in board.h
Pinmaps should not have contained GPIO_SPEED_xxx settings.
This is board dependent.
This change adds CONFIG_STM32_USE_LEGACY_PINMAP to allow for
lazy migration to using pinmaps without speeds.
The work required to do this can be aided by running tools/stm32_pinmap_tool.py.
The tools will take a board.h file and a legacy pinmap and outut the required
changes that one needs to make to a board.h file.
Eventually, STM32_USE_LEGACY_PINMAP will be deprecated and the legacy
pinmaps removed from NuttX.
Any new boards added should set STM32_USE_LEGACY_PINMAP=n and
fully define the pins in board.h
Pinmaps should not have contained GPIO_SPEED_xxx settings.
This is board dependent.
This change adds CONFIG_STM32_USE_LEGACY_PINMAP to allow for
lazy migration to using pinmaps without speeds.
The work required to do this can be aided by running tools/stm32_pinmap_tool.py.
The tools will take a board.h file and a legacy pinmap and outut the required
changes that one needs to make to a board.h file.
Eventually, STM32_USE_LEGACY_PINMAP will be deprecated and the legacy
pinmaps removed from NuttX.
Any new boards added should set STM32_USE_LEGACY_PINMAP=n and
fully define the pins in board.h
Pinmaps should not have contained GPIO_SPEED_xxx settings.
This is board dependent.
This change adds CONFIG_STM32_USE_LEGACY_PINMAP to allow for
lazy migration to using pinmaps without speeds.
The work required to do this can be aided by running tools/stm32_pinmap_tool.py.
The tools will take a board.h file and a legacy pinmap and outut the required
changes that one needs to make to a board.h file.
Eventually, STM32_USE_LEGACY_PINMAP will be deprecated and the legacy
pinmaps removed from NuttX.
Any new boards added should set STM32_USE_LEGACY_PINMAP=n and
fully define the pins in board.h
Pinmaps should not have contained GPIO_SPEED_xxx settings.
This is board dependent.
This change adds CONFIG_STM32_USE_LEGACY_PINMAP to allow for
lazy migration to using pinmaps without speeds.
The work required to do this can be aided by running tools/stm32_pinmap_tool.py.
The tools will take a board.h file and a legacy pinmap and outut the required
changes that one needs to make to a board.h file.
Eventually, STM32_USE_LEGACY_PINMAP will be deprecated and the legacy
pinmaps removed from NuttX.
Any new boards added should set STM32_USE_LEGACY_PINMAP=n and
fully define the pins in board.h
Pinmaps should not have contained GPIO_SPEED_xxx settings.
This is board dependent.
This change adds CONFIG_STM32F7_USE_LEGACY_PINMAP to allow for
lazy migration to using pinmaps without speeds.
The work required to do this can be aided by running tools/stm32_pinmap_tool.py.
The tools will take a board.h file and a legacy pinmap and outut the required
changes that one needs to make to a board.h file.
Eventually, STM32F7_USE_LEGACY_PINMAP will be deprecated and the legacy
pinmaps removed from NuttX.
Any new boards added should set STM32F7_USE_LEGACY_PINMAP=n and
fully define the pins in board.h
Pinmaps should not have contained GPIO_SPEED_xxx settings.
This is board dependent.
This change adds CONFIG_STM32H7_USE_LEGACY_PINMAP to allow for
lazy migration to using pinmaps without speeds.
The work required to do this can be aided by running tools/stm32_pinmap_tool.py.
The tools will take a board.h file and a legacy pinmap and outut the required
changes that one needs to make to a board.h file.
Eventually, STM32H7_USE_LEGACY_PINMAP will be deprecated and the legacy
pinmaps removed from NuttX.
Any new boards added should set STM32H7_USE_LEGACY_PINMAP=n and
fully define the pins in board.h
The text describes an issue related to the running task in code.
The running task is only used when calling the _assert function
to indicate the task that was running before an exception occurred.
However, the current code only updates the running task during
irq_dispatch, which is suitable for ARM-M architecture but not
for ARM-A or ARM-R architecture, because their context switches
are not done through irq handler. Therefore, if the following
process is followed, the value of the running task will be incorrect:
1. task1 is running, this_task()=task1
2. do_irq is executed, setting running task()=task1
3. task1 switches to task2
4. task2 is running and generates a data abort
5. In the data abort, the _assert function is called,
and the running task obtained is still task1, but
the actual task that generated the exception is task2.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Over-drive can be forced to a given state by adding define to the
board.h configuration file:
#define STM32_VOS_OVERDRIVE 1 - force over-drive enabled,
#define STM32_VOS_OVERDRIVE 0 - force over-drive disabled,
#undef STM32_VOS_OVERDRIVE - autoselect over-drive by the default RCC logic
It seems that over-drive is not required for ULPI but it can be a workaround solution for boards with poor signal integration.
Higher core voltage means faster clock signal edges, which may be sufficient to synchronize the high-speed clock and data on poorly designed boards.
Over-drive can be forced to a given state by adding define to the
board.h configuration file:
#define STM32_VOS_OVERDRIVE 1 - force over-drive enabled,
#define STM32_VOS_OVERDRIVE 0 - force over-drive disabled,
#undef STM32_VOS_OVERDRIVE - autoselect over-drive by the default RCC logic
- Remove the temporary "saved" variable when temporarily changing MMU
mappings to access another process's memory. The fact that it has an
address environment is enough to make the choice
- Restore nxflat_addrenv_restore-macro. It was accidentally lost when
the address environment handling was re-factored.
On a GICv2 implementation, setting GICC_CTLR.EOImode to 1 separates
the priority drop and interrupt deactivation operations.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Summary:
- Support arm64 pmu api, Currently only the cycle counter function is supported.
- Using ARM64 PMU hardware capability to implement perf interface, modify all
perf interface related code.
- Support for pmu init under smp.
Signed-off-by: wangming9 <wangming9@xiaomi.com>
Otherwise, a request will never be transferred and there is no
information to the user that something is wrong.
For example, when using default values for TXFIFO in HS mode,
USBMSC will never work because the maximum request len is 512B
which is lower than the default TXFIFO size for IN EP.
Current Toolchain.defs set the compile flags directly, it's OK for
target specified gcc toolchain.
But some LLVM based toolchains (Rust/Zig etc) use single toolchain to handle all supported paltform.
In this patch, arch level Toolchain.defs export standard LLVM style arch flags, and let <Lang>.defs to map them into internal style,
This will simplify the intergration of non-c language.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
