Gregory Nutt
5e0c18b535
Merged in david_s5/nuttx/upstream_2_greg_ramtron (pull request #198 )
...
Adding missing CONFIG_ prefix
2017-01-20 20:48:22 +00:00
David Sidrane
ca895b978b
Adding missing CONFIG_ prefix
2017-01-20 10:45:50 -10:00
Gregory Nutt
08c001196b
drivers/: Remove all explicit use of 'hidden' macro _info. Code must never use this directly. Code must always use a debug macro such as info which is basic on _info but can be appropriately filtered.
2017-01-15 13:00:50 -06:00
Gregory Nutt
2d9668fbd2
Fix a typo in a comment
2017-01-12 16:24:41 -06:00
Aleksandr Vyhovanec
bf528f2071
packed_struct replaced by begin_packed_struct and end_packed_struct
2017-01-09 14:17:49 +03:00
David Sidrane
548108764a
BugFix:uart_ops_s portion of cdcacm will not be initalized with correct functions if CONFIG_SERIAL_DMA is lit.
...
This fixes the issses in a C99 compatible way
2016-12-17 04:29:41 -10:00
Gregory Nutt
4795d58e03
Back out most of 46dbbe837e. The order is correct -- or, rather, the order is the same as the order that response data is provided. Change the order will break all other drivers.
2016-12-15 07:16:24 -06:00
Gregory Nutt
ca92ecafa7
MMC/SD: Format changed from %d to %lu. Must cast argument to unsigned long to avoid crash on 64-bit machine.
2016-12-14 17:44:12 -06:00
Gregory Nutt
f4f32bc740
MMC/SD SDIO (again): This is really an endian-ness issue. Behavior should be different on big- vs little-endian machines.
2016-12-14 17:04:27 -06:00
Alan Carvalho de Assis
3c4a8d05b0
MMC/SD SDIO driver: Change the endianess order to read the return of long response command
2016-12-14 14:17:52 -06:00
Gregory Nutt
f063e4c5ac
Remove Calypso architecture support and support for Calypso SERCOMM driver.
2016-12-13 18:35:52 -06:00
Gregory Nutt
d9e040d76b
Remove all Calypso board configurations
2016-12-13 18:24:49 -06:00
Gong Darcy
44b7975a5e
SSD1306: Fix errors in SPI mode configuration
2016-12-04 10:07:46 -06:00
Gregory Nutt
7467329a98
Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed.
2016-12-03 16:28:19 -06:00
Gregory Nutt
ad3897531f
C5471 Ethernet now supports CONFIG_NET_NOINTS
2016-12-03 12:17:55 -06:00
Gregory Nutt
43459fe75e
DM09x0 Ethernet now supports CONFIG_NET_NOINTS
2016-12-03 11:42:15 -06:00
Gregory Nutt
eba1e076ec
PIC32MX/Z Ethernet: Now supports CONFIG_NET_NOINT
2016-12-03 09:50:14 -06:00
Gregory Nutt
bfa1da14e2
LM3S Ethernet now supports CONFIG_NET_NOINTS
2016-12-03 08:32:49 -06:00
Gregory Nutt
c0cbea2550
Remove RGMP and RGMP drivers.
2016-12-02 09:49:33 -06:00
Janne Rosberg
8442bf66b9
usbhost_cdcacm: add CDC_SUBCLASS_ACM and CDC_PROTO_ATM to supported class and proto
2016-11-30 12:20:23 -06:00
Janne Rosberg
4b282f219a
usbhost_composite: fix end offset in usbhost_copyinterface()
2016-11-30 12:18:23 -06:00
Gregory Nutt
96be43b270
drivers/net/: Adapt all Ethernet drivers to work as though CONFIG_NET_MULTIBUFFER were set. Remove all references to CONFIG_NET_MULTIBUFFER
2016-11-29 16:44:23 -06:00
Gregory Nutt
1793c1f8e1
Trivial, cosmetic change
2016-11-29 15:03:51 -06:00
Gregory Nutt
9ee3f3b933
sched_note: Permit spinlock and critical section notes in in-memory buffer iff sched_not_get() interfaces is disabled.
2016-11-28 18:36:26 -06:00
Gregory Nutt
d65be718c2
sched_note: Extend OS instrumentation to include some SMP events.
2016-11-27 17:14:57 -06:00
Gregory Nutt
0804286ad3
arch/: Add option to use low-priority work queue to all Ethernet drivers in arch that support CONFIG_NET_NOINTS.
2016-11-19 09:20:01 -06:00
Wolfgang Reißnegger
88539a7497
USBMSC: Fix length of mode6 sense reply packet.
2016-11-18 17:23:21 -08:00
Gregory Nutt
cdbc66addd
Merge branch 'master' of bitbucket.org:nuttx/nuttx
2016-11-18 09:30:40 -06:00
Gregory Nutt
936b55f608
drivers/net: Add option to use low-priority work queue to all drivers in drivers/net. Not yet added to all architecture-specific network drivers.
2016-11-18 09:22:49 -06:00
Gregory Nutt
175ec43628
Merged in slorquet/nuttx/timerfixes (pull request #171 )
...
Timerfixes
2016-11-18 14:45:36 +00:00
Gregory Nutt
52560bba37
ENC28J60: Allow either HP or LP work queue to be used.
2016-11-18 08:41:27 -06:00
Sebastien Lorquet
5363d0619a
Fix warnings
2016-11-18 15:26:08 +01:00
Gregory Nutt
47b52a2633
Fix an error in manually bringing in Sebastien's changes; Update some comments.
2016-11-17 16:15:06 -06:00
Gregory Nutt
9acd57c819
Fix up some naming and update some comments.
2016-11-17 15:50:39 -06:00
Gregory Nutt
19c1c9d78b
All timer lower half drivers. Port Sebastien's changes to all all other implementations of the timer lower half. Very many just and untested. Expect some problems.
2016-11-17 15:03:31 -06:00
Sebastien Lorquet
197cec58d2
timer driver: Use signal to notify of timer expiration. Add generic argument so that there can be additional usage.
2016-11-17 14:38:21 -06:00
Gregory Nutt
d4a048c0c6
Timer driver: Add hooks to support signal notification of timer expiration. Commented out because invasive interface changes would also be required to complete the implementation.
2016-11-17 12:41:11 -06:00
Gregory Nutt
ecb2d4cbc1
drivers/timer: Remove the TIOC_SETHANDLER IOCTL call. This calls directly from the timer driver into application code. That is non-standard, non-portable, and cannot be supported
2016-11-17 11:52:42 -06:00
Alan Carvalho de Assis
a6b7730f8c
Add Vishay VEML6070 driver and support for STM32F103-Minimum board
2016-11-13 11:44:28 -06:00
Marc Rechté
58c2cd2843
drivers/ioexpander: Add some debug output.
2016-11-08 07:46:25 -06:00
Gregory Nutt
b0dffdc2ca
Fix a number of header files with mismatched 'extern C {' and '}'
2016-11-05 07:25:05 -06:00
Gregory Nutt
6ff6cca1a0
Fix some mispellings of semaphore
2016-11-03 17:48:36 -06:00
Gregory Nutt
4fcbe8e410
drivers: Disable priority inheritance on all semaphores used for signaling
2016-11-03 11:00:47 -06:00
Gregory Nutt
47b043df1e
drivers/serial.c: Make sure that priority inheritance is not enabled for the signaling semaphores used in the serial driver.
2016-11-03 08:16:59 -06:00
Paul A. Patience
d89765e1d0
spi: Fix Kconfig warning
...
This commit moves the ARCH_HAVE_SPI options outside the check
for SPI. Those options don't depend on SPI, and Kconfig files
in arch/ enable them even if SPI isn't enabled.
Sourcing the driver's Kconfig in drivers/Kconfig only if
support for the driver is enabled prevents us from defining
these ARCH_HAVE options in the driver's Kconfig. We should
probably remove the other checks in drivers/Kconfig and check
if the drivers are enabled only in their Kconfig.
2016-11-02 13:16:12 -04:00
Gregory Nutt
8dd2494407
Review of last PR: Fix return value (ERROR is not a value return value in this context). Fix some spacing.
2016-11-01 15:13:09 -06:00
Aleksandr Vyhovanec
be1626ad7b
Added EEPROM timeout
2016-11-02 00:03:16 +03:00
Gregory Nutt
de6db52b52
Oops... Last commit had some garbage in the file
2016-10-24 15:36:11 -06:00
Gregory Nutt
3d4ce55ebd
Oops.. a couple of hunks failed in the last patch. Hope I got them fixed correctly.
2016-10-24 15:25:40 -06:00
Max Nekludov
146d7e7921
drivers/net/tun.c: Fix bug in TUN interface driver
2016-10-24 15:17:01 -06:00
Max Kriegleder
77e5115e23
syslog: Fixes required for file syslog output
2016-10-19 08:27:20 -06:00
Janne Rosberg
847d2b4218
usbhost/composite: fix compile; missing semicolons
2016-10-18 11:52:23 -06:00
Janne Rosberg
72f13db4bf
usbhost/enumerate: fix possible buffer overwrite
2016-10-18 08:15:19 -06:00
Gregory Nutt
6a0917ae7f
Eliminate warnings
2016-10-06 07:44:17 -06:00
Gregory Nutt
2da3da7fd6
Costmetic changes from review of last commit
2016-09-25 17:24:39 -06:00
Gregory Nutt
0908a6c6b9
Fix calculations using MSEC_PER_TICK. If USEC_PER_TICK is less than 1000, then MSEC_PER_TICK will be zero. It will be inaccurate in any case.
2016-09-25 08:17:33 -06:00
Alan Carvalho de Assis
61980caee5
drivers/sensors: Adds support for the Sensixs XEN1210 3D-boar. This sensor is used on NANOSATC-BR2 a Brazillian CUBESAT project.
2016-09-16 12:45:53 -06:00
Gregory Nutt
de3e35f00a
include/nuttx/modem: Move all modem-related IOCTL commands to a common file to assure that they will be unique
2016-09-16 09:39:51 -06:00
Aleksandr Vyhovanec
b0f973d901
MTD: SPI-based driver for Macronix MX25L3233F or MX25L6433F.
2016-09-02 11:00:04 -06:00
Aleksandr Vyhovanec
3f40541b21
MTD: Fixed cloned typos in several FLASH drivers.
2016-09-02 07:27:57 -06:00
Gregory Nutt
7f6a403b96
USB host composite is at least partially functional. No longer depends on CONFIG_EXPERIMENTAL
2016-09-02 07:26:29 -06:00
Gregory Nutt
e958c32e4d
USB host composite: Using wrong interface number from interface descriptor.
2016-08-31 13:29:38 -06:00
Gregory Nutt
ebe829c4b9
USB host composite: A test should be <= not just <
2016-08-31 13:24:38 -06:00
Gregory Nutt
7ea9632592
Change the way that contactless IOCTL commands are defined. All IOCTL commands must be unique.
2016-08-31 11:30:22 -06:00
Gregory Nutt
4b0e8e56cf
Add contactless/ directory to Documentation
2016-08-31 10:58:08 -06:00
Gregory Nutt
7b75a32ca1
Improve some comments
2016-08-31 08:16:12 -06:00
Gregory Nutt
cb7c1c1f14
USB host composite: Add an option to permit support only a subset of the composite intefaces.
2016-08-31 07:56:27 -06:00
Sebastien Lorquet
1d1affdd2b
fix mfrc522
2016-08-31 13:46:27 +02:00
Sebastien Lorquet
d4048f3eeb
CL fixes
2016-08-31 13:41:49 +02:00
Sebastien Lorquet
90568f9e8f
Add CL make.defs
2016-08-31 13:25:21 +02:00
Sebastien Lorquet
e5ba71caf8
add cl kconfig
2016-08-31 13:24:19 +02:00
Sebastien Lorquet
3bf11c7203
Add contactless drivers, with renames
2016-08-31 13:20:53 +02:00
Sebastien Lorquet
3654b841bc
Move contactless drivers to their own directory
2016-08-31 13:08:58 +02:00
Gregory Nutt
aa0d1868f5
USB host composite: Fix places where the wrong pointer was used; Add a test for an error condition.
2016-08-30 13:58:01 -06:00
Gregory Nutt
ac623abc7d
USB host composite: Reosolves last remaining REVISIT design issues. Compiles clean with no errors and warning and is fully ready for testing.
2016-08-30 10:52:41 -06:00
Gregory Nutt
ee83e49f75
Update a comment
2016-08-29 15:43:11 -06:00
Gregory Nutt
1ce4db8008
USB host composite: Save some information that will be needed to create a class-specific configuration.
2016-08-29 15:02:15 -06:00
Gregory Nutt
f4f807100b
Update comment
2016-08-29 14:55:03 -06:00
Alpo Leinonen
7d5173ca09
USB host composite: Several syntactic errors fixed
2016-08-29 07:53:57 -06:00
Gregory Nutt
43abb7cb3a
Mark USB host compsite feature EXPERMENTAL; update ChangeLog
2016-08-28 14:51:55 -06:00
Gregory Nutt
31c364457a
CLASS_CONNECT needs to be called for each member of the composite.
2016-08-28 08:48:40 -06:00
Gregory Nutt
58b45d64d7
Fix composite connect method.
2016-08-28 08:33:38 -06:00
Gregory Nutt
5d4428be93
Add check of class ID in device scriptor header
2016-08-27 10:53:43 -06:00
Gregory Nutt
c973e0d3ba
Add the logic necessary to abstract the register lookup information for each candiate class
2016-08-27 10:31:18 -06:00
Gregory Nutt
2460d41ae0
Add more logic to the USB host composite wrapper.
2016-08-26 17:03:16 -06:00
Gregory Nutt
0860621e60
Fill one more case of 'Missing logic' in the USB host composite wrapper.
2016-08-26 12:34:58 -06:00
Gregory Nutt
3c0b287fe9
Fill in a little of the 'Missing logic' in the USB host composite wrapper.
2016-08-26 12:24:35 -06:00
Gregory Nutt
ea8ce7acb6
Trivial rename
2016-08-26 11:05:50 -06:00
Gregory Nutt
a228b0cc36
Add a little more meat to the still very USB host composite skeleton. Not quite so boney now.
2016-08-26 10:33:41 -06:00
Gregory Nutt
fa4e9e3c1c
Add a little more meat to the still very bony USB host composite skeleton.
2016-08-26 10:13:35 -06:00
Gregory Nutt
579e338cd3
Add a little more meat to the USB host composite skeleton. Still pretty bony.
2016-08-26 09:47:38 -06:00
Gregory Nutt
8a1d6c9ed8
Basic framework that might be used to add USB host support
2016-08-26 09:07:52 -06:00
Gregory Nutt
c51b642f81
Fix some driver return values. If sem_wait fails, the errcode is in errno, not the return value.
2016-08-25 07:15:59 -06:00
Alexander Entinger
221fcfd8f1
drivers/sensors: Add driver for the Bosch BMG160 3 axis gyroscop.
2016-08-24 09:41:04 -06:00
Alexander Entinger
0044910e33
drivers/sensors: Add driver for the LIS3DSH 3 axis accelerometer.
2016-08-24 08:28:45 -06:00
Beat Küng
dd1f679891
mtd: Add Fujistu MB85RS256B ramtron support
...
contributed by flatlevel from https://github.com/PX4/NuttX/pull/79
2016-08-23 18:27:04 +00:00
Entinger Alexander
b29287b022
drivers/sensors: Add driver for the MLX90393 3 axis magnetometer.
2016-08-23 10:48:08 -06:00
Entinger Alexander
338bf8c9e3
drivers/sensors: Add drvier for the LIS3MDL 3 axis magnetometer
2016-08-23 08:22:47 -06:00
Gregory Nutt
60b70f7dbb
Make xorshift128 re-entrant so that we do do have to suffer the overhad of serialization controls.
2016-08-21 07:47:53 -06:00
Gregory Nutt
6f833be9d5
Separate XorShift128 PRNG from /dev/urandom and make it generally available.
2016-08-20 11:36:02 -06:00
Gregory Nutt
cbebd9c99b
Lower case hex
2016-08-17 17:32:53 -06:00
Alan Carvalho de Assis
d3a5bd4ba0
drivers/audio/tonic.: Remove dependency on LIBM for creating a static table with frequencies notes.
2016-08-17 16:41:00 -06:00
Alan Carvalho de Assis
229a200734
Add NULL termination to tune string and fix missing break
2016-08-17 16:34:49 -06:00
Alan Carvalho de Assis
8b99dd4cdb
drivers/audio: Add Audio Tone Generator for NuttX
2016-08-16 13:20:05 -06:00
Piotr Mienkowski
053aea552f
Add support for SAMV7 DACC module
2016-08-15 08:00:36 -06:00
Gregory Nutt
32ebeb15b4
Trivial changes from review of PR 115
2016-08-14 13:47:07 -06:00
Gregory Nutt
ade02a513b
Merged in v01d/nuttx/ssd1306-128 (pull request #115 )
2016-08-14 13:42:24 -06:00
v01d
943c853939
semantic changes
2016-08-14 16:23:13 -03:00
v01d
02a7fd2430
Make OLED 132x64 use 128x64 for the time being
2016-08-14 14:54:58 -03:00
Gregory Nutt
4b582f0ae9
Fix some comments
2016-08-14 07:16:18 -06:00
Gregory Nutt
e963e8d879
Changes from review of PR 112
2016-08-13 16:53:23 -06:00
Gregory Nutt
72a2fed1d0
Merged in v01d/nuttx/ssd1306_fixes (pull request #112 )
...
SH1106 0.96 OLED module support (SSD1306 compatible) + I2C fixes
2016-08-13 16:33:28 -06:00
v01d
21e930cdba
SH1106 0.96 OLED module support (SSD1306 compatible) + I2C fixes
2016-08-13 19:20:20 -03:00
Gregory Nutt
ab16ad7530
Fix some bugs in the oneshot driver logic
2016-08-12 14:19:11 -06:00
Gregory Nutt
82b86cdcf3
oneshot interface: max_delay method should return time in a standard struct timespec form.
2016-08-12 11:33:10 -06:00
Gregory Nutt
89135c55e4
drivers/timer: Add an upper-half, oneshot timer character driver.
2016-08-12 10:40:07 -06:00
Gregory Nutt
caea59b340
SPI bit order: Add configuration setting to indicate if an architecture-specif SPI implementation does or does not support LSB bit order.
2016-08-08 12:21:20 -06:00
Gregory Nutt
6df28bc74e
Make bit-order SPI H/W feature configurable for better error detection
2016-08-08 11:54:13 -06:00
Gregory Nutt
21859af6d9
Add check of return value in drivers affected by last change: Report the error on a failure to set the bit order.
2016-08-08 08:40:37 -06:00
Gregory Nutt
7d4cb73bd6
STM32 and EFM32 SPI drivers adopted an incompatible conventions somewhere along the line. The set the number of bits to negative when calling SPI_SETBITS which had the magical side-effect of setting LSB first order of bit transmission. This is not only a hokey way to pass control information but is supported by no other SPI drivers.
...
This change three things: (1) It adds HWFEAT_LSBFIRST as a new H/W feature. (2) It changes the implementations of SPI_SETBITS in the STM32 and EFM32 derivers so that negated bit numbers are simply errors and it adds the SPI_HWFEATURES method that can set the LSB bit order, and (3) It changes all calls with negative number of bits from all drivers: The number of bits is now always positive and SPI_HWFEATUREs is called with HWFEAT_LSBFIRST to set the bit order.
2016-08-08 08:28:13 -06:00
Gregory Nutt
9965cbe428
drivers/: Review and correct some stylistic inconsistencies
2016-08-07 09:43:48 -06:00
Alan Carvalho de Assis
10a7698112
drivers/wireless/mfrc522.c: Fix memory free command
2016-08-07 07:34:01 -06:00
Alan Carvalho de Assis
bfac90f720
Add MFRC522 RFID ISO14443 and Mifare transceiver driver
2016-08-06 08:45:52 -06:00
Gregory Nutt
83c7b4d5d6
SPI driver: Correct return value in case of a certain error condition
2016-08-06 08:07:30 -06:00
Gregory Nutt
50e9a5fa33
Add more options to spi_transfer
2016-08-05 13:22:18 -06:00
Gregory Nutt
5407a673fc
Tiva TM4C-1294 Launchpad: tiva_appinit.c is a better home for board_pwm_setup() vs. tiva_bringup.c
2016-08-05 13:05:41 -06:00
Gregory Nutt
7048d08123
drivers/spi: Add an SPI character driver that will permit access to the SPI bus for testing purposes. This driver is a simple wrapper around spi_transfer().
2016-08-05 11:07:35 -06:00
Gregory Nutt
7da67bc80a
drivers/spi: Add a helper function that encapsulates and manages a sequency of SPI transfers.
2016-08-05 10:23:04 -06:00
Gregory Nutt
3d5df2e5af
Extend I/O Expander interrupt controls; Add test of level sensitve interrupt to Simulated I/O expander
2016-08-04 16:19:52 -06:00
Gregory Nutt
1f9799b68d
I/O Expanders: Interrupt detection logic should not ignore the no-change case. Still need to handle level interrupts even with no change.
2016-08-03 13:10:20 -06:00
Gregory Nutt
803b540e8a
Fix various issues with I/O expander and GPIO lower half drivers from testing with simulated I/O expander
2016-08-03 12:46:54 -06:00
Gregory Nutt
778a8131bf
SIM: Add a simulated I/O Expander driver
2016-08-03 09:44:48 -06:00
Gregory Nutt
7ba445868c
KXJT9: In read(), return multiple samples if the user-provided buffer will hold multiple samples.
2016-08-02 17:32:47 -06:00
Gregory Nutt
30229c217b
Cosmetic changes
2016-08-02 10:46:19 -06:00
Gregory Nutt
c32d40fd7d
KXJT9 Accelerometer driver from the Motorola Moto Z MDK
2016-08-02 10:38:14 -06:00
Gregory Nutt
62bc64bc55
Back out last Makefile.unix change. After puzzling about this for a while, I moved the definitions to apps/Make.defs. Also includes some cosmetic changes to GPIO lower half driver comments.
2016-08-02 08:37:30 -06:00
Gregory Nutt
9685fd8c99
GPIO driver: Add an IOCTL to unregister a signal handler
2016-08-01 13:52:27 -06:00
Gregory Nutt
0f9fb09a53
GPIO driver: Add an IOCTL command to get the pin type
2016-08-01 12:09:00 -06:00
Gregory Nutt
d0f6a23a32
Ooops.. forgot to add files before last commit
2016-08-01 11:15:29 -06:00
Gregory Nutt
d47aa75669
Add PCF8574 I/O Expander driver. Some cleanup also of other expander drivers.
2016-08-01 11:10:11 -06:00
Gregory Nutt
e0f3df5d97
Remove another lingering kruft
2016-08-01 10:01:28 -06:00
Gregory Nutt
583dad647c
TCA64xx: Remove some unused kruft
2016-08-01 09:59:36 -06:00
Gregory Nutt
9d9ff44736
GPIO lower half: Add conditional logic to handle the case where the I/O expander does not support interrupts.
2016-08-01 09:06:58 -06:00
Gregory Nutt
bf60f11801
Remove some unnecessary header file inclusions
2016-08-01 08:55:13 -06:00
Gregory Nutt
3e79ffc6dd
Some updates to the last commit
2016-08-01 08:49:15 -06:00
Gregory Nutt
6090f69bfd
Add a GPIO lower-half driver that can be used to register a GPIO character driver for accessing pins on an I/O expander.
2016-08-01 08:43:10 -06:00
Gregory Nutt
91b1006d42
I/O Expander Interface: Add argument to interrupt callback. Add a method to detach the interrupt.
2016-08-01 07:26:04 -06:00
Gregory Nutt
fb84e51d5b
Minor improvements/fixes to the TCA64xx driver.
2016-08-01 06:48:05 -06:00
Gregory Nutt
c0b83cb4b4
First (untested) cut at a TCA64XX I/O Expander driver leverages from Project Ara
2016-07-31 19:52:44 -06:00
Gregory Nutt
8fab9fb00f
Rethink last commit -- probably going down the wrong path
2016-07-31 18:33:04 -06:00
