Gregory Nutt
c790450ba2
Remove CONFIG_ARCH_CALIBRATION. It is awkward to use and no longer necessary now that we have apps/examples/calib_udelay.
2018-08-19 10:06:36 -06:00
Gregory Nutt
bbad69ab61
Change all occurrences of CONFIG_EXAMPLES_NSH* to CONFIG_SYSTEM_NSH* to match changes in the apps/ directory.
2018-08-18 09:14:59 -06:00
Gregory Nutt
e4922ed9f0
Remove instructures to CD to tools/ before running ./configure.sh
...
Squashed commit of the following:
configs/*/README.txt: Replace each occurrence of './configure.sh' with 'tools/configure.sh'
configs/*/README.txt: Remove 'cd ..' after each './configure.sh'
configs/*/README.txt: Remove 'cd -' after each './configure.sh'
configs/*/README.txt: Remove 'cd tools' before each './configure.sh'
configs/README.txt: Remove instruction to CD tools/ before running configure.sh.
2018-05-09 11:41:46 -06:00
Gregory Nutt
873de7b480
configs/*/README.txt: Update to the new URL for obtaining the ARM toolchain.
2017-08-13 07:18:19 -06:00
Gregory Nutt
9aac1dd44d
configs: Remove all setenv.bat files. Remove all references to setenv.sh and setenv.bat from all config README files.
2017-04-26 10:12:13 -06:00
Gregory Nutt
7c34a77b54
Move apps/system/usbmonitor to nuttx/drivers/usbmonitor
2016-06-30 12:24:33 -06:00
Gregory Nutt
e46cd30c14
Change use of mknulldeps.sh to mkwindeps.sh
2016-01-09 14:13:44 -06:00
Gregory Nutt
9e99cfa4e0
Correct many bitbucket.org URLs
2015-06-28 09:14:52 -06:00
Gregory Nutt
7214e52fb2
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
Gregory Nutt
46bd0bc307
This cleans up most of the remaining SourceForge references
2015-06-26 18:13:20 -06:00
Gregory Nutt
0dbf579aa8
Fix numerous typos in configuration variable names. Tracked down by Alan Carvalho de Assis
2015-05-23 17:08:35 -06:00
Gregory Nutt
d8c31bdf20
USB HUB: Fix a deadlock that can occur if the HCD and the HUB try to share the high priority work queue. Now how work must be done on the low priority work queue.
2015-04-29 08:32:17 -06:00
Gregory Nutt
d96ddb61f5
Minor typo in README
2015-04-27 14:12:25 -06:00
Gregory Nutt
86bfc4be75
Port hub support to LPC31 from SAMA5; Updated Olimex-LPC-H3131 for hub support and refresh configurations
2015-04-26 12:18:08 -06:00
Gregory Nutt
ca57ef9fac
Change naming of HP work queue configuration varaibles to be symmetric with LP work queue naming
2014-10-11 17:03:44 -06:00
Gregory Nutt
51950d7850
Undefine IRQPRIO in all configurations it should not be set
2014-04-16 08:29:39 -06:00
Gregory Nutt
0cefef9cb5
Documentatin updated; fix errors in some comments
2014-03-28 09:52:07 -06:00
Gregory Nutt
f32456d562
configs/eagle100/nsh converted to use the kconfig-frontends tools
2014-03-01 14:12:05 -06:00
Gregory Nutt
e9252b8806
LPC31 EHCI: Verified that driver works with keyboard (low-speed, interrupt endpoints)
2013-11-29 14:31:42 -06:00
Gregory Nutt
91517ead98
Changes for ZDS-II ez80 build
2013-11-28 17:47:03 -06:00
Gregory Nutt
3b7626236d
LPC31 EHCI: Seems to work after re-ordering some initialization logic
2013-11-27 13:14:23 -06:00
Gregory Nutt
f537edbe36
LPC-H3131: SDRAM timing update. Still does not work
2013-11-21 14:46:49 -06:00
Gregory Nutt
d7f11a8656
LPC-H3131 SDRAM: Fix some build issues
2013-11-21 12:45:42 -06:00
Gregory Nutt
0a0537ebb7
lpc31 ECHI. Early debug changes
2013-11-20 16:24:10 -06:00
Gregory Nutt
4c2b07c388
Olimex LPC_H3131: Add GPIO support for LEDs and for USB host power enable and overcurrent detection.
2013-11-19 15:52:10 -06:00
Gregory Nutt
06330220ef
Updated README
2013-11-18 19:07:49 -06:00
Gregory Nutt
d078398f2b
Add .gitignore files; update a README
2013-11-18 15:38:04 -06:00
Gregory Nutt
04c764b496
Add support for the Olimex LPC-H3131 board
2013-11-18 14:51:38 -06:00
