Tiago Medicci Serrano
96f83bb03a
net: Enable CONFIG_NET_ARP_SEND
by default
...
Enable logic to send ARP requests if the target IP address mapping
does not appear in the ARP table.
Please check the comment in https://github.com/apache/nuttx/issues/12446#issuecomment-2145856778
2024-06-06 02:40:16 +08:00
Ville Juven
74702085f0
defconfigs: Add SCHED_HAVE_PARENT=y to configs with WAITPID && BUILD_KERNEL
...
The added depencendy broke some of the defconfigs
2024-06-03 18:00:40 +02:00
Xiang Xiao
d2c4de6167
board: Add CONFIG_LIBC_EXECFUNCS and CONFIG_PSEUDOTERM to adb config
...
required by https://github.com/apache/nuttx-apps/pull/2257
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2024-01-15 17:14:51 +08:00
anjiahao
35051dd715
coredump: support coredump save to block device when crash
...
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
2023-12-10 07:02:03 -08:00
Masayuki Ishikawa
991c5029a0
boards: sabre-6quad: Fix cxxtest issue
...
Summary:
- Fixes a linker issue in https://github.com/apache/nuttx/pull/8244 by disabling compiler optimization.
- Adjusts CONFIG_DEFAULT_TASK_STACKSIZE to 4096 to ensure proper functioning of cxxtest.
Impact:
- The changes may slightly affect performance due to disabled optimizations
but are necessary for cxxtest stability.
Testing:
- Successfully tested on QEMU-8.1.2 with arm gcc 12.3.Rel1,
confirming resolution of the linker issue and stable operation of cxxtest.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2023-11-15 03:52:26 -08:00
Xiang Xiao
47faeeb360
tls: Move task_tls_alloc and task_tls_destruct to libc
...
so task_tls_destruct can be called from usrspace, which is required by:
https://github.com/apache/nuttx/pull/10288
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-08-28 11:02:18 +03:00
Xiang Xiao
b183114d43
arch/arm: Change the default value to ARCH_TRUSTZONE_NONSECURE
...
since nuttx normally run inside the non secure execution environment
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-08-13 08:43:01 +02:00
hujun5
618d47570d
arm/trustzone: update defconfig
...
we should add CONFIG_ARCH_TRUSTZONE_NONSECURE=y to ap's defconfig
Signed-off-by: hujun5 <hujun5@xiaomi.com>
2023-07-29 06:58:24 -07:00
hujun5
ad6b12acf5
arm/trustzone: update defconfig
...
we should add CONFIG_ARCH_TRUSTZONE_NONSECURE=y to ap's defconfig
Signed-off-by: hujun5 <hujun5@xiaomi.com>
2023-07-26 18:53:28 -07:00
chao an
6f87bcc9ac
sabre-6quad/coredump: add coredump config to enable ci check
...
How to setup coredump ?
1. Build config coredump:
$ ./tools/configure.sh ./boards/arm/imx6/sabre-6quad/configs/coredump
$ make
2. Run qemu and get the coredump snapshot:
$ qemu-system-arm -semihosting -M sabrelite -m 1024 -smp 4 -nographic -kernel ./nuttx -s
ABCDGHIJKNOPQ
NuttShell (NSH) NuttX-10.4.0
nsh> coredump
[CPU0] [ 6] Start coredump:
[CPU0] [ 6] 5A5601013D03FF077F454C4601010100C0000304002800C00D003420036000070400053400200008200A4000000420030034C024200001D8092004E00200601A
[CPU0] [ 6] 060C0000E85D831040030018200E400300072003403C601F06100000F8518310400340574003E0041F00142003025683106003A000E0081F005A201B4003A000
[CPU0] [ 6] E0071F03987F831040030060200E4003E0041F209003288A8310400300B820104003E0041F061C0000D09283104003609C2003C01F00202006007C2003000320
[CPU0] [ 6] 0308435055302049444C45200BE02700E0333BE01B0040A70094200340CFE0576BE0070040730006200340000424A782101420030474A482102020074137400B
[CPU0] [ 6] 0030200B4027422309F51880108E8A80107F0161AA600040BFE102670031E01FBF4053E00300E0233BE02B0040A7E10267E02C6B403BE05700436B019319A167
[CPU0] [ 6] 200F20005A560100A703FF010000200000202003007C20030003200308435055322049444C45200BE0170000022003E00300E0233BE02B0040A7009420030001
[CPU0] [ 6] 2003E02F6BE007B3E04C00025683102005E0080040BFE102670033E01FBF402FE00300E0233BE02B0040A7E10267E02C6BE007B3E04C00005AE1196706687077
[CPU0] [ 6] 6F726B00E01CBF00042003E00300A03BE0500040A7C167A06BE01CA7E00300E007B3E0170042FF05BC748310785C213B00005A560100F303FF0A000074A48210
[CPU0] [ 6] 38748310242007010100E00D0008987F8310998C8010A4200303FF000020201260004008007C200300032003076E73685F6D61696E200AE0180000052003E003
[CPU0] [ 6] 00E0233BE02B0040A70094200340DFE02F6BE007B3E0170000022003078480831088998310200A0200F08E2007200FC1674003400004CC8A8310042007006420
[CPU0] [ 6] 030028200BE1176707636F726564756D70200AE0180000062003E00300E0233BE02B0040A7C167E02F6BE007B3E017000BDC458310E0988310780A0000415B03
[CPU0] [ 6] 6C9A8310416B408B4133408F01788F217BA000405F00B0202F02EB21816003035F0000602012E0EB000100005A5601002103FF0E000000005E831000A27C3F00
[CPU0] [ 6] 005080200DE0FF00E0FF00E0FF00E0CA000100005A5601001203FF010000E0FF00E0FF00E0FF00E0DA000100005A5601005403FF01000020000838748310D037
[CPU0] [ 6] 8310DF200B0487328010C8200B400F400720120000400B00AB2017005F200B04432B80101520030002200B0101012004E00600028137806033E0FF00E0FF00E0
[CPU0] [ 6] FF00E083000100005A560100F203FF010000600007808310BC8F8310DF200A088732801084FFFFFFA0200F0006200F04848A83105F200704E92D8110F1200340
[CPU0] [ 6] 1303108C8310202200FF200A0900988E8310FD248010F7A01B061BD3801054AC826033C0004023403304CDD2801001200FE00300030FA2801020061200C15080
[CPU0] [ 6] 103081821089678010A18E8310B35CE0092B400F0333EC8010404F4003200EE0640040C34003407B0D08F781107F7B801071F28010A99480C340000291938060
[CPU0] [ 6] 2340AB4003400B05A1928010F883E005AF01F99080DF40174003009DA00F00642003400F0071A00F013F692063200B018D37E00163E0FF00E0FF00E02E000100
[CPU0] [ 6] 005A5601003A03FF010000600003589083102006E0080001F092801707636F726564756D70200A600003EFBEADDEE0FF03E0FF03E0FF03E01B032342E07A0001
[CPU0] [ 6] 00005A560101C003FF010000E095000BF08E83100927801054AC8210400B201201005F2003400BE00717E0CB0040DBE007E7E00FFF40170055200F0043201720
[CPU0] [ 6] 0A6023401F4017400006111D8010207183600F047D40831018200B4023E003470794818210D91A8010E0174701E43FE00173403306F49A8310DF4C8160170448
[CPU0] [ 6] 99831041201704CE1F841002200704CD3F81100C2007049D34811040201B200A05002EF781106C200B008D200B001D201F05893E81107978806F000A200300D8
[CPU0] [ 6] 204F01D57B800F00882027400300F1E0020F009F202B40434027C06B122F798010789B8310F803000008040000C89683600F04277A80108C200700BC2037202A
[CPU0] [ 6] 01008F202B20060200D092200F000820082003006C20470730A7821000FCFFFF201160000533208110D0072008201F410340230020202301B12220BB200B2019
[CPU0] [ 6] 010006200301992420DF0323000001200B01001C805740034037400340420000208F60000504000534002040166000046BE88110F0213F200A000040AB00FF20
[CPU0] [ 6] 0000E120E7400B020B188160174000400F201A00FF402B048517811065200340FB201260B000FD203303F7528110408300A9A00700E84083E00200033F698010
[CPU0] [ 6] 401B018D37814720005A5601000800090100006000010000
[CPU0] [ 6] Finish coredump (Compression Enabled).
3. Copy the hex body and save to file:
$ cat elf.dump
[CPU0] [ 6] 5A5601013D03FF077F454C4601010100C0000304002800C00D003420036000070400053400200008200A4000000420030034C024200001D8092004E00200601A
...
[CPU0] [ 6] 401B018D37814720005A5601000800090100006000010000
4. Run tools/coredump.py to convert hex dump to elf coredump:
$ ./tools/coredump.py elf.dump
Chunk #1 is compressed, 317 bytes (original size: 1023 bytes)
...
Chunk #10 is compressed, 8 bytes (original size: 9 bytes)
$ ls elf.core
elf.core
5. Pass core(elf.core) and bin elf(nuttx) to gdb:
!!(Toolchain(arm-none-eabi-gdb) version must be newer than 11.3) !!
$ arm-none-eabi-gdb -c elf.core nuttx
GNU gdb (Arm GNU Toolchain 11.3.Rel1) 12.1.90.20220802-git
...
Reading symbols from nuttx...
[New process 6]
[New process 1]
[New process 2]
[New process 3]
[New process 4]
[New process 5]
[New process 6]
Core was generated by `'.
#0 0x10808a8e in up_idle () at chip/imx_idle.c:61
61 }
[Current thread is 1 (process 6)]
(gdb)
(gdb) info thread
Id Target Id Frame
* 1 process 6 0x10808a8e in up_idle () at chip/imx_idle.c:61
2 process 1 0x10808a8e in up_idle () at chip/imx_idle.c:61
3 process 2 0x00000000 in ?? ()
4 process 3 0x00000000 in ?? ()
5 process 4 up_switch_context (tcb=0x1082a474 <g_idletcb>, rtcb=rtcb@entry=0x10837438) at common/arm_switchcontext.c:95
6 process 5 up_switch_context (tcb=0x10838ef0, rtcb=rtcb@entry=0x10838000) at common/arm_switchcontext.c:95
7 process 6 elf_emit_tcb_note (cinfo=0x10839a6c, tcb=0x10838ef0) at libelf/libelf_coredump.c:272
(gdb) thread 6
[Switching to thread 6 (process 5)]
#0 up_switch_context (tcb=0x10838ef0, rtcb=rtcb@entry=0x10838000) at common/arm_switchcontext.c:95
95 arm_switchcontext(&rtcb->xcp.regs, tcb->xcp.regs);
(gdb) bt
#0 up_switch_context (tcb=0x10838ef0, rtcb=rtcb@entry=0x10838000) at common/arm_switchcontext.c:95
#1 0x10803286 in nxsem_wait (sem=0x10838fbc) at semaphore/sem_wait.c:176
#2 0x10812de8 in nxsched_waitpid (pid=pid@entry=6, stat_loc=stat_loc@entry=0x10838a84, options=options@entry=4) at sched/sched_waitpid.c:169
#3 0x10812df6 in waitpid (pid=pid@entry=6, stat_loc=stat_loc@entry=0x10838a84, options=options@entry=4) at sched/sched_waitpid.c:639
#4 0x1080d31a in nsh_builtin (vtbl=vtbl@entry=0x10838c10, cmd=0x10838e98 <error: Cannot access memory at address 0x10838e98>, argv=argv@entry=0x10838adc, redirfile=redirfile@entry=0x0, oflags=oflags@entry=0) at nsh_builtin.c:162
#5 0x1080a20e in nsh_execute (oflags=0, redirfile=0x0, argv=0x10838adc, argc=1, vtbl=0x10838c10) at nsh_parse.c:641
#6 nsh_parse_command (vtbl=vtbl@entry=0x10838c10, cmdline=<optimized out>) at nsh_parse.c:2742
#7 0x1080a510 in nsh_parse (vtbl=vtbl@entry=0x10838c10, cmdline=cmdline@entry=0x10838e98 <error: Cannot access memory at address 0x10838e98>) at nsh_parse.c:2826
#8 0x10809390 in nsh_session (pstate=0x10838c10, login=login@entry=1, argc=argc@entry=1, argv=argv@entry=0x108383f8) at nsh_session.c:245
#9 0x108090f8 in nsh_consolemain (argc=argc@entry=1, argv=argv@entry=0x108383f8) at nsh_consolemain.c:71
#10 0x1080909c in nsh_main (argc=1, argv=0x108383f8) at nsh_main.c:74
#11 0x1080693e in nxtask_startup (entrypt=0x10809071 <nsh_main>, argc=1, argv=0x108383f8) at sched/task_startup.c:70
#12 0x1080378c in nxtask_start () at task/task_start.c:134
#13 0x00000000 in ?? ()
Backtrace stopped: previous frame identical to this frame (corrupt stack?)
Signed-off-by: chao an <anchao@xiaomi.com>
2023-05-25 20:42:04 +08:00
chao an
5945f080b9
boars/spawn_proxy: remove all CONFIG_POSIX_SPAWN_PROXY_STACKSIZE
...
Signed-off-by: chao an <anchao@xiaomi.com>
2023-04-27 17:35:58 +08:00
Masayuki Ishikawa
037dcbf7cc
boards: sabre-6quad: Add netnsh_ar8031 configuration
...
Summary:
- This commit adds sabre-6quad:netnsh_ar8031 configuration
Impact:
- None
Testing:
- Tested with ping, telnet, iperf
- Note that iperf in TCP mode still has a performance issue.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2023-04-25 11:45:19 +08:00
Ville Juven
09e7987121
sched/addrenv: Fix system crash when process group has been deleted
...
There is currently a big problem in the address environment handling which
is that the address environment is released too soon when the process is
exiting. The current MMU mappings will always be the exiting process's, which means
the system needs them AT LEAST until the next context switch happens. If
the next thread is a kernel thread, the address environment is needed for
longer.
Kernel threads "lend" the address environment of the previous user process.
This is beneficial in two ways:
- The kernel processes do not need an allocated address environment
- When a context switch happens from user -> kernel or kernel -> kernel,
the TLB does not need to be flushed. This must be done only when
changing to a different user address environment.
Another issue is when a new process is created; the address environment
of the new process must be temporarily instantiated by up_addrenv_select().
However, the system scheduler does not know that the process has a different
address environment to its own and when / if a context restore happens, the
wrong MMU page directory is restored and the process will either crash or
do something horribly wrong.
The following changes are needed to fix the issues:
- Add mm_curr which is the current address environment of the process
- Add a reference counter to safeguard the address environment
- Whenever an address environment is mapped to MMU, its reference counter
is incremented
- Whenever and address environment is unmapped from MMU, its reference
counter is decremented, and tested. If no more references -> drop the
address environment and release the memory as well
- To limit the context switch delay, the address environment is freed in
a separate low priority clean-up thread (LPWORK)
- When a process temporarily instantiates another process's address
environment, the scheduler will now know of this and will restore the
correct mappings to MMU
Why is this not causing more noticeable issues ? The problem only happens
under the aforementioned special conditions, and if a context switch or
IRQ occurs during this time.
2023-02-08 02:51:23 +08:00
Masayuki Ishikawa
50989430cd
boards: sabre-6quad: Enable DEBUG_ASSERTION in citest
...
Summary:
- Since QEMU does not report L2CC information correctly,
NuttX stops if DEBUG_ASSERTIONS=y.
- This commit adds DEBUG_ASSERTIONS=y to citest/defconfigs
and disables L2CC related configs.
- Also, it disables RAMLOG to show the crash information
Impact:
- None
Testing:
- Tested with QEMU-7.1
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2023-02-06 18:26:05 +08:00
Masayuki Ishikawa
7af531f677
boards: sabre-6quad: Add netnsh_wb
...
Summary:
- This commits adds netnsh_wb which enables write buffers.
Impact:
- None
Testing:
- Tested with iperf (-s 205Mbps, -c 176Mbps) on QEMU-7.1
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2023-01-30 13:25:15 +08:00
Masayuki Ishikawa
138f3faeef
boards: sabre-6quad: Adjust TCP and UDP configurations
...
Summary:
- This commit adjusts TCP and UDP configurations based on
sabre-6quad/configs/netnsh/defconfig
Impact:
- sabre-6quad only
Testing:
- Tested with QEMU-7.1
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2023-01-19 08:09:33 +01:00
Masayuki Ishikawa
548c417858
boards: sabre-6quad: Improve iperf performance
...
Summary:
- This commit improves iperf performance
- Also, adjusts CONFIG_IDLETHREAD_STACKSIZE
Impact:
- None
Testing:
- Tested with QEMU-7.1
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-12-16 09:49:11 -03:00
chao an
6d8c28a83c
boards/citest: disable NET_ARP for usrsocktest
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-11-24 20:54:18 +08:00
chao an
422272044b
boards/iperf: device name will vary across different NICs
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-11-20 19:44:32 +08:00
Xiang Xiao
4e43fef5cd
boards: Update telnetd related config after apps/nshlib change
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-07 15:24:29 +09:00
Xiang Xiao
28947517ca
sched/spawn: Rename task_spawnattr_[get|set]stack[size|addr] to posix_spawnattr_[get|set]stack[size|addr]
...
since they can be not only used in task_spawn but also in posix_spawn
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-01 09:51:18 +09:00
nietingting
f361d1cd41
CI: add example to sim
...
Signed-off-by: nietingting <nietingting@xiaomi.com>
2022-10-26 10:55:50 +08:00
nietingting
8438396f33
ci: add qemu run support
...
Signed-off-by: nietingting <nietingting@xiaomi.com>
2022-10-21 14:57:43 +08:00
Xiang Xiao
edd68d8ae9
board: Change CONFIG_SYSTEM_NSH_SYMTAB to CONFIG_NSH_SYMTAB
...
follow the apps side change
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-10-18 22:18:51 +02:00
Masayuki Ishikawa
07b9ebc555
boards: sabre-6quad: Add the skeleton network driver
...
Summary:
- This commit adds the skeleton network driver to netnsh/defconfig
- Also, enable IPv6 to check compilation
Impact:
- None
Testing:
- Build with sabre-6quad:netnsh
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-10-07 14:34:03 +08:00
Xiang Xiao
0fa17f32f2
drivers/telnet: Remove io work thread
...
The thread isn't really needed but complicate the workflow
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-09-30 12:54:29 +09:00
Masayuki Ishikawa
b3795daa53
boards: sabre-6quad: Add netknsh_smp/defconfig
...
Summary:
- This commit adds netknsh_smp/defconfig
Impact:
- None
Testing:
- Tested with qemu-6.2
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-08-13 10:46:36 +08:00
Masayuki Ishikawa
b317e9058f
boards: sabre-6quad: Add CONFIG_NET_GUARDSIZE=4 to defconfigs
...
Summary:
- This commit adds CONFIG_NET_GUARDSIZE=4 to defconfigs
Impact:
- None
Testing:
- Tested with qemu-6.2
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-08-12 10:30:48 -04:00
Masayuki Ishikawa
51ffd310a8
boards: sabre-6quad: Add telnetd to netknsh/defconfig
...
Summary:
- This commit adds telnetd to netknsh/defconfig
Impact:
- None
Testing:
- Tested with qemu-6.2
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-08-10 09:42:56 +03:00
Masayuki Ishikawa
714e6fda9c
boards: sabre-6quad: Add iperf to netknsh/defconfig
...
Summary:
- This commit adds iperf to netknsh/defconfig
Impact:
- None
Testing:
- Tested with qemu-6.2
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-07-27 23:22:23 +08:00
Masayuki Ishikawa
6a469fe228
boards: sabre-6quad: Add adbd to netnsh/defconfig
...
Summary:
- This commit adds adbd to netnsh/defconfig
Impact:
- None
Testing:
- Tested with qemu-6.2
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-07-26 16:04:21 +08:00
Masayuki Ishikawa
79e5579837
boards: sabre-6quad: Enable to test C++ static object in ELF
...
Summary:
- This commit enables to test C++ static object in ELF (hello++3)
Impact:
- elf defconfig only
Testing:
- Tested with QEMU and sabre-6quad board
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-07-22 21:38:17 +08:00
Masayuki Ishikawa
2dfe88d759
boards: sabre-6quad: Add netknsh/defconfig
...
Summary:
- This commit adds sabre-6quad:netknsh config
Impact:
- None
Testing:
- Tested with qemu-6.2
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-07-11 09:32:52 -03:00
Oki Minabe
f0fb530eaa
arch: imx6: add support kernel build and smp
...
Summary:
- add support BUILD_KERNEL and SMP for imx6
- prepare page tables of cpu1,2,3
- add sabre-6quad:knsh_smp config
Impact:
- imx6
Testing:
- getprime, smp on sabre-6quad:knsh_smp w/ qemu
Signed-off-by: Oki Minabe <minabe.oki@gmail.com>
2022-05-27 01:31:58 +08:00
Ville Juven
5800dd2af5
boards/xxx: Remove CONFIG_SCHED_ATEXIT/ONEXIT from all defconfigs
2022-05-25 15:28:43 +08:00
Masayuki Ishikawa
7b6ac23277
boards: sabre-6quad: Add defconfig for libcxx
...
Summary:
- This commit adds defconfig for libcxx
Impact:
- None
Testing:
- Tested with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-05-02 10:24:16 +03:00
Masayuki Ishikawa
2cbad5d92e
boards: sabre-6quad: Enable environ and path in knsh/defconfig
...
Summary:
- This commit enables environ and path in knsh/defconfig
Impact:
- None
Testing:
- Tested with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-03-17 13:41:01 +08:00
Masayuki Ishikawa
023b1a5260
boards: sabre-6quad: Add CONFIG_DEBUG_FULLOPT=y to knsh/defconfig
...
Summary:
- I noticed that undefined instruction happens with getprime and gcc-10.3.1
- Actually, the issue does not happen with gcc-9.3.1
- This is a tentative solution to avoid the issue
Impact:
- sabre-6quad:knsh only
Testing:
- Tested with hello/getprime
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-03-12 11:49:53 +08:00
Huang Qi
bfedbf1c05
arm/imx6: Enable setjmp test in ostest
...
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2022-03-08 21:00:29 +08:00
Masayuki Ishikawa
955153aac4
boards: sabre-6quad: Add knsh
...
Summary:
- Add sabre-6quad:knsh to test BUILD_KERNEL with qemu
- Update README.txt to run the nuttx with qemu
Impact:
- None
Testing:
- Tested with QEMU
- NOTE: getprime crashes with undefined instruction when
compiled with gcc 10.3.x (please use 9.3.1)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-03-01 09:57:57 -03:00
Xiang Xiao
9836c6be9b
boards: Remove CONFIG_CLOCK_MONOTONIC from all defconfig
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-02-23 01:21:26 +08:00
ligd
412d030149
boards: move USERMAIN_XX out of INIT_ENTRYPOINT
...
Signed-off-by: ligd <liguiding1@xiaomi.com>
2021-12-24 08:23:30 -06:00
Xiang Xiao
7c5c77ff7b
boards/imx6: Fix symbol value '' invalid for TESTING_OSTEST_FPUSIZE
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-11-10 09:17:19 +01:00
Alin Jerpelea
9d870e1502
defconfig: allow use of BSD components
...
several configs are used for testing and need the BSD components
more information about license can be found here
https://www.apache.org/legal/resolved.html#category-a
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-09-02 09:00:43 -03:00
Alin Jerpelea
cf884b7460
Revert "defconfig: remove NFS from defconfig"
...
This reverts commit ff07cb8b2f
.
2021-09-02 09:00:43 -03:00
Alin Jerpelea
ff07cb8b2f
defconfig: remove NFS from defconfig
...
NFS uses BSD license and should not be enabled by default
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-08-30 22:39:04 +08:00
Xiang Xiao
b12f588140
Rename CONFIG_LIB_BOARDCTL to CONFIG_BOARDCTL
...
since boardctl isn't a libc feature
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-08-06 13:58:26 +02:00
Xiang Xiao
5025fbef8d
Rename LIB_ to LIBC_ for all libc Kconfig
...
follow other libc component naming convention
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-08-05 19:45:24 +02:00
Jiuzhu Dong
85470176e7
sched/task: delete CONFIG_MAX_TASKS limit
...
Change-Id: I583015a95dbcebd352f81ecb3104ffdbd646a9ec
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
2021-07-11 19:42:30 -07:00
Masayuki Ishikawa
d8ca691e2a
boards: sabre-6quad: Add ELF support to netnsh and netnsh_smp
...
Summary:
- This commit adds ELF support to netnsh and netnsh_smp
Impact:
- None
Testing:
- Tested with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-05-16 22:30:55 -05:00