Gregory Nutt
505f460b6b
configs: Review all implementations of board_lcd_initialize(). The NuttX convention is that all internal functions that return errors as an 'int' must return a negated errno value on failure and a non-negative value on success. Most were right but eight of them had cloned logic that returns 1 on success and zero on failure... both of which are interpreted as success by the caller since they are non-negative.
2018-04-21 18:03:01 -06:00
Gregory Nutt
1d044e6952
Eliminate some warnings found in build-testing
2018-04-19 16:54:17 -06:00
Gregory Nutt
82aa7a486c
configs/Kconfig: Fix some breakage inflicted on the Kconfig file by the i.MX RT merge. Fix some coding standard problems in hymini-stm32v board support.
2018-04-19 16:36:35 -06:00
Gregory Nutt
301bf1ee77
This commit eliminates the BOARDIOC_TSCTEST_SETUP command.
...
Squashed commit of the following:
configs: Each board now initializes the touchscreen controller as a normal part of its board bring-up. board_tsc_setup() is gone; the touchscreen controller is now treated like any other on-board device.
Remove all support for BOARDIOC_TSCTEST_SETUP
Move prototype for board_tsc_setup() from include/nuttx/board.h to individual board header files.
2018-01-17 09:33:28 -06:00
Gregory Nutt
e276d4d16d
Remove the BOARDIOC_TSCTEST_TEARNDOWN boardctl() command. Remove all implementations of board_tsc_teardown() (the were all stubs anyway except for the simulation).
2018-01-16 18:03:21 -06:00
Gregory Nutt
0de294a586
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
2017-05-11 13:35:56 -06:00
Gregory Nutt
e9a5477506
Add an instance argument to the SPIDEV definitions.
2017-04-29 12:26:52 -06:00
Sebastien Lorquet
68af2a9354
more stm32
2017-04-28 18:30:23 +02:00
Gregory Nutt
77f980e676
Buttons: Correct some comments left after last button-related change: 32- vs 8-bit bit set.
2017-04-09 14:44:49 -06:00
Gregory Nutt
f9e402018b
Buttons: Change return value of board_buttons() and the type of btn_buttonset_t to uint32_t so that more than 8 buttons can be supported.
2017-04-09 07:22:49 -06:00
Gregory Nutt
7a9a3bea2f
stm32_gpiosetevent: GPIO IRQ function should not return the xcpt_t oldhandler. This value is useful and potentially dangerous by itself after the change to assocaite a argument with the interrupt handler.
2017-03-02 18:36:14 -06:00
Gregory Nutt
f4bad1a280
stm32_gpiosetevent: GPIO IRQ logic no longer returns the xcpt_t oldhandler. This value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 16:34:37 -06:00
Gregory Nutt
4c82827ab1
board_button_irq: Button IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing.
2017-03-02 14:37:22 -06:00
Gregory Nutt
704df7bd39
IRQ arguments: Fix errors discovered in build testing
2017-02-27 19:28:24 -06:00
Gregory Nutt
67de2e5f66
Add argument to STM32 EXTI interrupt handlers.
2017-02-27 14:21:30 -06:00
Mark Schulte
b3222bbc8a
irq_dispatch: Add argument pointer to irq_dispatch
...
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
2017-02-27 06:27:56 -06:00
Gregory Nutt
43eb04bb8f
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
2016-06-20 11:59:15 -06:00
Gregory Nutt
0c8c7fecf0
Add _ to the beginning of all debug macros to avoid name collisions
2016-06-16 12:33:32 -06:00
Gregory Nutt
2ddd57c674
Centralize definitions associated with CONFIG_DEBUG_LEDS
2016-06-15 14:12:19 -06:00
Gregory Nutt
24c51ec1ff
Centralize definitions associated with CONFIG_DEBUG_LCD
2016-06-15 11:40:33 -06:00
Gregory Nutt
ba03134bed
Centralize definitions associated with CONFIG_DEBUG_SPI
2016-06-15 10:41:13 -06:00
Gregory Nutt
94f5e87222
configs/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition.
2016-06-13 11:04:19 -06:00
Gregory Nutt
40f0481478
configs/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition.
2016-06-13 09:44:12 -06:00
Gregory Nutt
b0458e36da
configs/: Remove references to non-existent SPI_VERBOSE setting
2016-06-12 17:57:12 -06:00
Gregory Nutt
a1469a3e95
Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()
2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2
Rename *lldbg to *llerr
2016-06-11 14:55:27 -06:00
Gregory Nutt
1cdc746726
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe
Replace all occurrences of vdbg with vinfo
2016-06-11 11:59:51 -06:00
Gregory Nutt
3a74a438d9
Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO
2016-06-11 11:50:18 -06:00
Gregory Nutt
4b3e710af6
Add an argument to board_app_initialize()
2016-05-24 10:51:22 -06:00
Gregory Nutt
8ace1e3be2
Remove all implementatinos of up_wdginitialize(). It is no longer used.
2016-05-18 19:48:42 -06:00
Gregory Nutt
1d2ee34131
SAM WDT: Rename up_wdginitialize() functions to something more appropriate for the internal OS interface.
2016-05-18 19:47:41 -06:00
Gregory Nutt
0334d4b4cd
Rename usbmsc_archinitialize to board_usbmsc_initialize
2016-03-25 12:09:37 -06:00
Gregory Nutt
9ed7d56a18
Building of xyz_appinit.c should depend on CONFIG_LIB_BOARDCTL, not CONFIG_NSH_ARCHINITIALIZE
2016-02-04 12:14:17 -06:00
Gregory Nutt
36bb11d77c
Rename files containing board_app_initialize from xyz_nsh.c to xyz_appinit.c
2016-02-04 12:03:09 -06:00
Gregory Nutt
9f2a839ac3
For STM32 boards, rename up_spiinitialize to stm32_spibus_initialize
2016-01-26 12:21:39 -06:00
Gregory Nutt
6daa73a945
Remove internal from name of all board header files
2015-12-29 15:44:56 -06:00
Gregory Nutt
893bd9c7b5
Rename board_led_off to board_autoled_off
2015-11-01 09:10:08 -06:00
Gregory Nutt
78f19bbefb
Rename board_led_on to board_autoled_on
2015-11-01 09:07:36 -06:00
Gregory Nutt
88c506d843
Rename board_led_initialize to board_autoled_initiaize
2015-11-01 09:03:01 -06:00
Paul A. Patience
272ab8c090
Fix typo
2015-09-10 21:20:53 -04:00
Paul A. Patience
55d8aee826
Simplify configs/ Makefiles by combining common longic into a new board.mk Makefile fragment. For Paul A. Patience"
2015-09-04 16:42:34 -06:00
Gregory Nutt
bfb182a4b4
Remove executable flag from more .c and .h files
2015-04-09 08:20:57 -06:00
Gregory Nutt
f73fdd90c9
More renaming: up_lcdinitialize->board_lcd_initialize, up_lcdgetdev->board_lcd_getdev, up_lcduninitialize->board_lcd_uninitialize
2015-04-04 11:49:15 -06:00
Gregory Nutt
d90824a0fc
Move include/nuttx/timer.h, rtc.h and watchdog.h to include/nuttx/timers/.
2015-04-01 12:37:44 -06:00
Gregory Nutt
fdfe38ea0d
rch_tcinitialize() and arch_tcunitinitialize() renamed to board_tsc_setup() and board_tsc_teardown(). These are not long called directly by applications but only indirectly throught the crappy boardctl() OS interface.
2015-03-31 13:21:25 -06:00
Gregory Nutt
103a17d4f1
Rename arch_nshinitialize() to board_app_initialize()
2015-03-31 10:21:31 -06:00
Gregory Nutt
159965bb53
Hymini STM32F4: Rename files for better conformance to naming conventions
2015-03-21 09:42:09 -06:00
Gregory Nutt
7583c94252
Move board_ prototypes from arch.h to board.h
2015-02-27 20:02:03 -06:00
Gregory Nutt
42327117a3
configs/: board function prototypes are now in include/nuttx/board.h. Remove from board header file; Add inclusion of nuttx/board.h to all files referencing board functions
2015-02-27 18:49:24 -06:00
