E51 may configure the L1 and L2 caches. Once configured,
no reconfiguration is possible after hardware reset is
issued.
L2 is 16-way set associative with write-back policy. The
size 2 MB, from which 1 MB is utilized with the values
provided here. That's a total of 8 ways. The rest of the
L2 is left out for the bootloader usage.
mpfs_enable_cache() first checks the bootloader usage
doesn't overlap with the cache itself, thus providing a
set of functional values.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
the SDIO clock is not enabled when the bus goes to the idle state, that, in turn, breaks
IRQ delivering mechanism over DAT[1]/IRQ SDIO line to the host.
This reverts commit d9a5b92c1a306a70df52d50a02a80dc8ef20bf0d.
Revert "arch/arm: Remove -march and -mtune"
This reverts commit b8e99cf12f3a287311a2d341f285c71a5da3e4d4.
Bluetooth is not enabled. When Bluetooth is enbaled then it defaults to
64KB. This will not wast those 64KB of memory when Bluetooth is not enabled.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
aio/lio_listio.c:227:7: warning: implicit declaration of function ‘ferr’ [-Wimplicit-function-declaration]
227 | ferr("ERROR: lib_zalloc failed\n");
| ^~~~
aio/lio_listio.c:275:3: warning: implicit declaration of function ‘finfo’ [-Wimplicit-function-declaration]
275 | finfo("Registering signal handler\n");
aio/aio_read.c: In function ‘aio_read_worker’:
aio/aio_read.c:90:11: warning: implicit declaration of function ‘file_pread’; did you mean ‘aio_read’? [-Wimplicit-function-declaration]
90 | nread = file_pread(aioc->aioc_filep, (FAR void *)aiocbp->aio_buf,
| ^~~~~~~~~~
| aio_read
aio/aio_write.c: In function ‘aio_write_worker’:
aio/aio_write.c:85:12: warning: implicit declaration of function ‘file_fcntl’ [-Wimplicit-function-declaration]
85 | oflags = file_fcntl(aioc->aioc_filep, F_GETFL);
| ^~~~~~~~~~
CC: mmap/fs_mmap.c
CC: pthread/pthread_condclockwait.c
aio/aio_write.c:107:18: warning: implicit declaration of function ‘file_write’; did you mean ‘aio_write’? [-Wimplicit-function-declaration]
107 | nwritten = file_write(aioc->aioc_filep,
| ^~~~~~~~~~
| aio_write
aio/aio_write.c:113:18: warning: implicit declaration of function ‘file_pwrite’; did you mean ‘aio_write’? [-Wimplicit-function-declaration]
113 | nwritten = file_pwrite(aioc->aioc_filep,
| ^~~~~~~~~~~
| aio_write
In file included from aio/aio_write.c:34:
aio/aio_write.c:121:12: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘ssize_t’ {aka ‘long int’} [-Wformat=]
121 | ferr("ERROR: write/pwrite/send failed: %d\n", nwritten);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~
| |
| ssize_t {aka long int}
aio/aio_write.c:121:47: note: format string is defined here
121 | ferr("ERROR: write/pwrite/send failed: %d\n", nwritten);
| ~^
| |
| int
| %ld
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
This commit adds new files that support functionality of QSPI driver in
SPI Master Mode. This functionality is included in new files sam_qspi_spi.x
to avoid too much mess in the source code. QSPI in SPI mode can be turn
on by config option SAMV7_QSPI_SPI_MODE.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This reverts commit 3724f6be55.
Because there is no real correlation between DNS namesize and NAME_MAX
as far as I know. The former is about network and the latter is about
filesystem. While they might happen to be similar values for
some configurations, it's very confusing to use them this way.
When nxstyle.c detects a "\'", it seeks the other "\'", records the index as "endndx", then skip the "'x'". But it makes the index "n" as "endndx+1".Then it comes to the "n++" in "for()". So the character after "'x'" will be skipped, causing some errors.
For example, "{"devid", no_argument, NULL, 'i'},", the "}" will be skipped, causing a lot of error reports.
Now it's fixed.
Signed-off-by: liucheng5 <liucheng5@xiaomi.com>
