Gregory Nutt
ad64c033e7
s/procfs: The procfs file system can now be configured so that it supports a runtime registration of procfs entries with CONFIG_FS_PROCFS_REGISTER=y
2015-12-01 14:56:20 -06:00
Gregory Nutt
6af3ba78b9
Remove CONFIG_NET_PINGADDRCONF. This was a uIP way of assigning IP addresses, but is not standard and not a appropriate feature in general.
2015-12-01 07:48:56 -06:00
Gregory Nutt
053aeb555c
Update ChangeLog
2015-11-30 16:51:44 -06:00
Gregory Nutt
4c22aae14a
Update ChangeLog
2015-11-30 16:06:10 -06:00
Gregory Nutt
49a34656b2
Fix spelling of Ken's last name in ChangeLog
2015-11-28 15:06:35 -06:00
Gregory Nutt
48da5aa496
sched/pthread/: CRITICAL BUGFIX: Logic was wiping out the indication that of the type of a pthread. Hence, it could be confused as a task. Found because this was causing a crash when /proc/nnn/cmdline was printed.
2015-11-28 10:05:36 -06:00
Ken Pettit
5821af1bbe
drivers/mtd: Add support for /dev/smart loop device. From Ken Petit
2015-11-28 09:00:26 -06:00
Gregory Nutt
e4236941c6
net/net_procfs.c: Add basic support for networking procfs entries
2015-11-27 12:33:58 -06:00
Gregory Nutt
2a93c66948
include/nuttx/net/netdev.h and several Ethernet drivers in arch/: Most network drivers to not support statistics. Those that do only support them when DEBUG is enabled. Each driver collects an architecture specific set of statistics and there is no mechanism in place to view those statistics. Thus, the driver feature was mostly useless. This change standardizes the driver statistics and puts the definition in the common network device structure defined in netdev.h where they can be accessed by network applications. All Ethernet drivers that collect statistics have been adapted to use these common statistics.
2015-11-26 12:08:09 -06:00
Gregory Nutt
ed35eb0f8d
drivers/loop: Add a loop character device that can be used to setup and teardown loop devices
2015-11-25 17:13:56 -06:00
Ken Pettit
d4a58af380
drivers/mtd/mtd/mtd_procfs/c and include/nuttx/mtd/mtd.h: Add an interface to un-regiser an MTD procfs entry.
...
drivers/mtd/filemtd.c: New new MTD conversion layer that will convert a regular file (or driver file) to an MTD device. This is useful for testing on the simulation using the hostfs.
From Ken Petit
2015-11-25 14:46:28 -06:00
Marco Krahl
b1b97e89c8
drivers/lcd/ili9432.c: Fixed errors in orientation. Portrait, RPortrait, and RLandscript should work correly now. They were displayed mirrored. From Marco Krahl
2015-11-25 13:01:37 -06:00
Gregory Nutt
fb0a148812
Update ChangeLog/TODO
2015-11-25 12:02:25 -06:00
Gregory Nutt
8f5047323f
Update ChangeLog and submodules
2015-11-25 08:38:58 -06:00
Ken Pettit
c0b9dcf8a9
fs/hostfs: Add a special file system for use with simulator that supports access to the host file system from the simulation. From Ken Petit
2015-11-25 08:26:26 -06:00
Gregory Nutt
6230e6e199
size_t should be 64-bits on a 64-bit machine. mmsize_t should be 32-bits (unless CONFIG_MM_SMALL is selected). This commit backs out the last change to stddef.h
2015-11-23 12:03:36 -06:00
Gregory Nutt
54549ef082
Revert "Add option to specify logical sector size during low level format plus adds some run-time geometry tests. fs/smartfs: Remove the 'mksmartfs()' code from the kernel 'fs'"
...
This reverts commit 96faf0fa3251ca10a17daddc728d931be5a206e0.
2015-11-22 10:15:06 -06:00
Gregory Nutt
64e8f12e2b
Add option to specify logical sector size during low level format plus adds some run-time geometry tests. fs/smartfs: Remove the 'mksmartfs()' code from the kernel 'fs'
...
directory and build.
2015-11-22 10:07:35 -06:00
Gregory Nutt
006528b144
Add support for freopen()
2015-11-22 08:39:17 -06:00
Gregory Nutt
84a5f846c9
open() has been extended. You can now open block drivers and access them just as you can character drivers. For example, you can hexdump a block device.
2015-11-21 11:24:55 -06:00
Gregory Nutt
38c9d42e21
drivers/timers/pcf85263.c: Add a driver for the NXP PCF85263 I2C RTC
2015-11-20 17:36:10 -06:00
Gregory Nutt
4b29bcee7f
Rename up_rtcinitialize to up_rtc_initialize so that it looks like other RTC interfaces
2015-11-20 08:27:52 -06:00
Ken Pettit
d30b73be82
W25: Add support for byte write mode. From Ken Petit
2015-11-20 07:34:07 -06:00
Ken Pettit
7b590ec9a2
drivers/mtd/smart.c Fixed SmartFS wear level error that occurs when the logical sector size is too small to save all wear level status bytes in a single sector. Logical sectors 1 and 2 were simply not being allocated and then the read_sector and write_sector routines were failing. From Ken Petit
2015-11-18 18:12:06 -06:00
Gregory Nutt
687cea60b3
Add basic support for the SAME70-Xplained board
2015-11-18 13:57:02 -06:00
Gregory Nutt
622ea95ab1
drivers/timers/ds3213.c: Extend to include support for the DS1307 RTC
2015-11-18 08:43:19 -06:00
Gregory Nutt
4579f0c1fc
Add a command to boardctl() to obtain a baord unique ID
2015-11-18 07:31:53 -06:00
Gregory Nutt
0d18b13a16
Update ChangeLog
2015-11-18 07:09:59 -06:00
Ken Pettit
f0f7dd9956
drivers/mtd/smart.c: Fix a Smart wear-leveling bug. From Ken Petit
2015-11-18 07:01:13 -06:00
Ken Pettit
7e58e4c4cf
W25: Fix W25 page read/write logic
2015-11-18 06:56:53 -06:00
Gregory Nutt
9d0984e21e
Update ChangeLog
2015-11-17 17:21:36 -06:00
Gregory Nutt
45530a77d4
Add support for DS3231 I2C RTC. Untested on initial commit.
2015-11-17 14:07:55 -06:00
Gregory Nutt
724901ceb9
Add support for multiple AT24xx EEPROM devices
2015-11-17 07:40:17 -06:00
Gregory Nutt
580529ba23
crypto/aes.c: Make refernce to key const
2015-11-16 14:30:43 -06:00
Gregory Nutt
2ae7485a57
Update ChangeLog
2015-11-16 10:47:21 -06:00
Gregory Nutt
457796d39e
Update ChangeLog
2015-11-14 12:15:38 -06:00
Max Neklyudov
d54a39832a
Implement high level DMA infrastructure for serial devices
2015-11-12 14:16:19 -06:00
Gregory Nutt
ef59f83a38
drivers/mtd/mtd_progmem.c: Add an upper-half driver that can be used with any FLASH library that provides the itnerfaces defined in include/nuttx/progmem.h
2015-11-12 13:40:18 -06:00
Gregory Nutt
5eaf368d16
progmem.h: Cosmetic updates to comments
2015-11-12 12:30:15 -06:00
Gregory Nutt
896834002a
BCH driver should forward ioctl commands to the contained block driver
2015-11-09 11:47:25 -06:00
Gregory Nutt
b2bdba0824
S25FL1 FLASH driver: Fix return value from the bwrite() method
2015-11-07 11:26:53 -06:00
Gregory Nutt
f5b82db9b0
Update ChangeLog
2015-11-06 11:14:33 -06:00
Gregory Nutt
c6fc285277
CAN: Add a new CAN upper-half interface, can_txready(), that can be used to break deadlock conditions in certain CAN hardware that supports queuing of TX messages
2015-11-03 10:52:58 -06:00
Lok
da8950fe5b
Fix an error in clock_timespec_subtract
2015-11-03 07:28:46 -06:00
Gregory Nutt
fc91ded815
Add support for a general user LED lower-half driver
2015-11-01 14:57:22 -06:00
Gregory Nutt
cbb78071b3
Rename ioexpander/ directories to discrete/
2015-11-01 13:14:48 -06:00
Gregory Nutt
0032b91f49
Update ChangeLog
2015-11-01 12:51:03 -06:00
Gregory Nutt
aa92d44caf
Update ChangeLog
2015-10-23 07:13:48 +08:00
Gregory Nutt
00af71dd78
Update ChangeLog
2015-10-20 06:02:10 +08:00
Gregory Nutt
d8731d0ef1
Add files missed in previous commit
2015-10-18 08:00:06 +08:00
