sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
42,943 Commits 1 Branch 0 Tags 291 MiB
ad76b6733c
Commit Graph

251 Commits

Author SHA1 Message Date
Eero Nurkkala
ad76b6733c mpfs: boards: add ld-envm.script 
This configuration is used when flashing nuttx as a bootloader
in the eNVM region.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-10-21 22:40:26 -05:00
Eero Nurkkala
3b330089d5 mpfs: ddr: add DDR training 
This adds DDR training. The training has a small chance of failing,
and then the training is restarted.

DDR training cannot be done meaningfully while the software is
in DDR. If the system is intended to run from eNVM, like a
bootloader, the linker script should be tuned to utilize the envm
region as follows:

  envm (rx)   : ORIGIN = 0x20220100, LENGTH = 128K - 256
  l2lim (rwx) : ORIGIN = 0x08000000, LENGTH = 1024k

256 bytes are reserved for the system; The fixed block may be
installed from the 'hart-software-services' -repository:
https://github.com/polarfire-soc/hart-software-services.git

For example, the 256-byte image: hss-envm-wrapper-bm1-dummySbic.bin
may be prepended on the nuttx bootloader image in the following
manner:

 cat hss-envm-wrapper-bm1-dummySbic.bin > nuttx_bootloader.bin
 cat nuttx.bin >> nuttx_bootloader.bin
 riscv64-unknown-elf-objcopy -I binary -O ihex --change-section-lma
  *+0x20220000 nuttx_bootloader.bin flashable_image.hex

This provides an image 'flashable_image.hex' that may be flashed on
the eNVM region via Microsemi Libero tool.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-10-21 22:40:26 -05:00
Abdelatif Guettouche
9235d6605b boards/esp32&esp32c3: Remove crypto accelerators' defconfigs. 
Since the tests were removed from the drivers, there is no need for
these defconfigs anymore.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
55e8b17974 boards/risc-v/esp32c3: Remove the flash encryption test. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
e424241d09 arch/risc-v/esp32c3: Remove the bignum test from the driver. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
91cb9dafaf arch/risc-v/esp32c3: Remove the RSA test from the driver. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
652d77efd2 arch/risc-v/esp32c3: Remove the SHA test from the driver. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
5d1c01aea7 arch/risc-v/esp32c3: Remove the AES test from the driver. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Matheus Castello
5c15fe6ec1 boards: k210: Add initial gpio user space support 
Signed-off-by: Matheus Castello <matheus@castello.eng.br>
 2021-10-17 17:29:59 +09:00
Matheus Castello
1bc3ab513d boards: risc-v: k210: Fix -march and -mabi 
-march=rv64gc -mabi=lp64 does not resolve lib paths for
riscv64-unknown-elf-gcc resulting in lib not found errors.
Changing it to -march=rv64imafc -mabi=lp64f that is the default
used in Sipeed repositories.

Signed-off-by: Matheus Castello <matheus@castello.eng.br>
 2021-10-14 15:50:20 +09:00
jsun
c58fddb915 Open ble controller adaptation code 
N/A

Signed-off-by: jsun <jsun@bouffalolab.com>
 2021-10-08 02:30:27 -07:00
Gustavo Henrique Nihei
0a1b3c1331 risc-v/esp32c3-devkit: Add BLE defconfig 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-05 08:45:40 -03:00
Gustavo Henrique Nihei
47e804b167 risc-v/esp32c3: Make BLE adapter code compliant to nxstyle 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-05 08:45:40 -03:00
Abdelatif Guettouche
ee20d0f545 esp32c3_rom.ld: Add a strong declaration to some libgcc function that 
are ROM resident.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-01 10:09:04 -03:00
Gustavo Henrique Nihei
548f2b6eab boards/esp32c3-devkit: Add mcuboot_confirm defconfig 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-27 18:22:29 -07:00
Gustavo Henrique Nihei
3c63cb522c risc-v/esp32c3: Enable booting from MCUboot bootloader 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-27 18:22:29 -07:00
Alan C. Assis
f9b322567c boards/esp32c3: Remove "return ret" from bringup 2021-09-21 10:34:55 -03:00
Alan C. Assis
63a17f5cdd esp32c3-devkit: Add board profile to use LVGL on GC9A01 display 2021-09-18 20:58:30 -05:00
Janne Rosberg
e022ea1283 mpfs/icicle/configs/hwtest: enable SD card 2021-09-18 12:18:09 -03:00
Eero Nurkkala
812f504c16 mpfs: emmcsd: add Kconfig/Makefile and board files 
Add necessary Kconfig, Make.defs, Makefile and board
file changes.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-09-18 12:18:09 -03:00
Peter Bee
a7a3d8bec7 boards/esp32c3: add ESP32C3 LCD drivers 
Add board driver for ST7735, ST7789 and GC9A01

Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
 2021-09-17 09:35:10 -03:00
Alan C. Assis
099e9fb4f7 boards: Remove -nostartfiles -nodefaultlibs from LDFLAGS 2021-09-13 08:58:25 +08:00
Janne Rosberg
d361a9ded8 boards/icicle: add hwtest config 
This config enables all peripherals and some tools.
Also useful for CI build check.
 2021-09-11 23:33:01 +08:00
Sara Souza
acf18bd82d risc-v/esp32-c3: refactor the Wi-Fi board logic. 
This commit moves the Wi-Fi initialization to
Wi-Fi specific file and to spiflash initialization.

It also reserves one partition for Wi-Fi use and for general use,
and makes it possible to me mounted by several FS.
 2021-09-09 20:14:04 +08:00
Sara Souza
11068fad1b risc-v/esp32-c3: Enable the allocation of multiple MTD SPI Flash partitions 2021-09-09 20:14:04 +08:00
Gustavo Henrique Nihei
310a2dd0e4 tools/esp32c3: Create option for merging all binaries into a single file 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-08 12:16:52 +02:00
Alin Jerpelea
9d870e1502 defconfig: allow use of BSD components 
several configs are used for testing and need the BSD components

more information about license can be found here
https://www.apache.org/legal/resolved.html#category-a

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
 2021-09-02 09:00:43 -03:00
Alin Jerpelea
2ab9e7fef0 Revert "esp32: remove FS_SPIFFS from defconfigs" 
This reverts commit 35a004bdd0.
 2021-09-02 09:00:43 -03:00
Alin Jerpelea
35a004bdd0 esp32: remove FS_SPIFFS from defconfigs 
FS_SPIFFS uses BSD license and should not be enabled by default

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
 2021-08-30 22:39:04 +08:00
Xiang Xiao
e3ab1179fa board: Enable CONFIG_LIBCXXABI when CONFIG_LIBCXX is enabled 
to avoid link libsupc++.a which is provided by toolchain

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-08-28 17:13:43 -03:00
Alin Jerpelea
a43650648e risc-V: remove ble defconfigs 
By default the components with BSD license should be disabled

NOTE:
the BLUETOOTH components was enabled in a non bluetooth config

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
 2021-08-27 02:56:22 +08:00
Antti Vähälummukka
6eb73ced51 arch/risc-v/src/mpfs: Add CorePWM driver 
Add a driver for CorePWM block, which can be instantiated on PolarFire SOC FPGA

This supports 2 CorePWM blocks on the FPGA. One CorePWM block provides 8 PWM output signals
 2021-08-20 08:56:30 -03:00
Xiang Xiao
b12f588140 Rename CONFIG_LIB_BOARDCTL to CONFIG_BOARDCTL 
since boardctl isn't a libc feature

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-08-06 13:58:26 +02:00
Xiang Xiao
5025fbef8d Rename LIB_ to LIBC_ for all libc Kconfig 
follow other libc component naming convention

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-08-05 19:45:24 +02:00
Xiang Xiao
007adc7736 Replace all __attribute__((section(x)) with locate_data(x) 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-07-29 21:55:21 -03:00
jordi
b87333bae8 Kconfig: remove empty help sections 
To avoid the setconfig warning: "has 'help' but empty help text"
 2021-07-23 02:32:19 -07:00
Alan C. Assis
b9ec0063bc Remove duplicated Documentation of the bl602evb 2021-07-19 06:26:52 -07:00
Sara Souza
81e881c8c0 risc-v/esp32-c3: Makes output readable and rmv unnecessary var. 2021-07-16 19:53:04 -03:00
Virus.V
063e1d6b74 risc-v/bl602: update wifi firmware and some fixup. 
1. Added check for repeated connection wifi operations.
2. Invoke the carrier on/off operation in the wrong place.
3. The RTC initialization time is incorrect.
4. Reserve 32K I-Cache space in the linker script.
5. Increase the size of the wifi firmware receiving buffer.

Signed-off-by: Virus.V <virusv@live.com>
 2021-07-13 05:12:12 -07:00
Virus.V
4e950c3e30 risc-v/bl602: add boardctl support 
Signed-off-by: Virus.V <virusv@live.com>
Change-Id: I74280f5cb801e923fb987009ae007aa02677b14d
 2021-07-13 02:50:40 -07:00
Dong Heng
f5eaf82c93 risc-v/esp32c3: Use onexit to free thread private semaphore 2021-07-12 09:38:21 -03:00
Jiuzhu Dong
85470176e7 sched/task: delete CONFIG_MAX_TASKS limit 
Change-Id: I583015a95dbcebd352f81ecb3104ffdbd646a9ec
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
 2021-07-11 19:42:30 -07:00
Dong Heng
d83caef2df boards/esp32c3-devkit: Support mounting SPI Flash MTD to littleFS 2021-07-08 09:01:43 -03:00
Dong Heng
2d6c1044fb boards/esp32c3-devkit: Fix compiling error 
Add UID defconfig to check compiling error.
 2021-07-07 02:49:52 -05:00
Xiang Xiao
f0961f43a6 boards/esp32c3-devkit: Add etctmp to .gitignore 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-07-06 09:49:43 -05:00
chenwen
97b8e90d79 boards/esp32c3: Add romfs configuration 2021-07-06 05:25:14 -05:00
Dong Heng
475becac37 risc-v/esp32c3: Add board_ioctl and board_uniqueid 2021-07-05 23:12:17 -05:00
Nathan Hartman
ce20211357 Fix various typos in comments and documentation 
Fix typos in these files:
    * Documentation/components/drivers/character/foc.rst
    * Documentation/guides/cpp_cmake.rst
    * Kconfig
    * arch/arm/src/imxrt/imxrt_lpspi.c
    * arch/arm/src/kinetis/kinetis_spi.c
    * arch/arm/src/kl/kl_spi.c
    * arch/arm/src/lpc31xx/lpc31_spi.c
    * arch/arm/src/nrf52/nrf52_radio.h
    * arch/arm/src/s32k1xx/s32k1xx_lpspi.c
    * arch/arm/src/stm32/Kconfig
    * arch/arm/src/stm32/stm32_adc.c
    * arch/arm/src/stm32/stm32_foc.c
    * arch/arm/src/stm32/stm32_foc.h
    * arch/arm/src/stm32/stm32_pwm.c
    * arch/arm/src/stm32/stm32_spi.c
    * arch/arm/src/stm32f0l0g0/stm32_spi.c
    * arch/arm/src/stm32f7/Kconfig
    * arch/arm/src/stm32f7/stm32_spi.c
    * arch/arm/src/stm32h7/Kconfig
    * arch/arm/src/stm32h7/stm32_allocateheap.c
    * arch/arm/src/stm32h7/stm32_fmc.c
    * arch/arm/src/stm32h7/stm32_fmc.h
    * arch/arm/src/stm32h7/stm32_pwm.c
    * arch/arm/src/stm32h7/stm32_qspi.c
    * arch/arm/src/stm32h7/stm32_spi.c
    * arch/arm/src/stm32l4/stm32l4_pwm.c
    * arch/arm/src/stm32l4/stm32l4_spi.c
    * arch/arm/src/stm32l5/Kconfig
    * arch/arm/src/stm32l5/stm32l5_spi.c
    * arch/renesas/src/rx65n/rx65n_dtc.c
    * arch/renesas/src/rx65n/rx65n_usbdev.c
    * arch/risc-v/src/rv32m1/rv32m1_serial.c
    * boards/arm/stm32/b-g431b-esc1/src/stm32_foc.c
    * boards/arm/stm32/nucleo-f103rb/src/stm32_foc_ihm07m1.c
    * boards/arm/stm32/nucleo-f302r8/src/stm32_foc_ihm07m1.c
    * boards/arm/stm32h7/nucleo-h743zi2/README.txt
    * boards/risc-v/rv32m1/rv32m1-vega/README.txt
    * boards/sim/sim/sim/scripts/Make.defs
    * drivers/1wire/1wire.c
    * drivers/1wire/1wire_internal.h
    * drivers/lcd/Kconfig
    * drivers/syslog/ramlog.c
    * fs/fat/Kconfig
    * libs/libc/debug/Kconfig
    * libs/libc/machine/Kconfig
    * libs/libc/stdio/lib_libvsprintf.c
    * libs/libc/stdlib/lib_div.c
    * libs/libc/stdlib/lib_ldiv.c
    * libs/libc/stdlib/lib_lldiv.c
    * libs/libdsp/lib_observer.c
 2021-07-04 11:23:26 -05:00
Xiang Xiao
1b5341f6c0 boards/bl602: Fix uart_nx.c:419: undefined reference to `uart_bth4_register' 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-07-01 05:01:21 -05:00
xiewenxiang
5fd3eca9c9 riscv/esp32c3: Support BLE sleep mode 2021-06-28 23:14:30 -05:00