sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
41,832 Commits 1 Branch 0 Tags 291 MiB
ae9b5fd306
Commit Graph

635 Commits

Author SHA1 Message Date
Wolfgang Reissnegger
c0fa319f2b SAM3/4 UDP: Fix handling of endpoint RX FIFO banks. 
This fixes a race condition where the HW fills a FIFO bank while the SW is
busy, resulting in out of sequence USB packets.
 2016-07-23 20:11:04 -07:00
Wolfgang Reissnegger
cc191a977d SAM3/4 UDP: Remove redundant EP state assignment. 2016-07-23 20:11:03 -07:00
Wolfgang Reissnegger
f3a6a40f62 SAM3/4 Serial: Fix warning when CONFIG_SUPPRESS_UART_CONFIG is set. 2016-07-23 16:23:49 -07:00
Gregory Nutt
96d5b734a8 Add missing TWI definitions 2016-07-21 08:01:59 -06:00
Gregory Nutt
18059d6821 Restore Wolfgang Reissnegger's PR as submitted. My mistake is it late here. 2016-07-14 18:39:51 -06:00
Wolfgang Reissnegger
f982180ec7 SAM3/4 Timer: Remove broken definitions for BMR register. 
Per documentation SAM4S and SAM4E have the BMR register values
as they are already defined. No need for chip specific values.

In addition:
 - CONFIG_ARCH_CHIP_SAM4s has wrong lower case 's' so the definitions would
   not be used anyways for SAM4S builds.
 - TC_BMR_TC2XC2S_TIOA2 does not make sense. There is no way to loop back
   TC2's TIOA2 into itself.
 2016-07-14 18:17:05 -06:00
Wolfgang Reissnegger
d89e062c06 SAM3/4 I2C: Fix reversed logic in twi_startmessage(). 2016-07-09 06:51:07 -06:00
Wolfgang Reissnegger
f4adb82fe7 [sam34][dacc] Bugfix: DACC_WPMR_WPKEY_MASK -> DACC_WPMR_WPKEY 2016-06-23 17:12:24 -07:00
Gregory Nutt
aed4d0e198 Missed a few *llinfo() to *info() conversions 2016-06-20 16:24:09 -06:00
Gregory Nutt
2a751068e6 Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err(). 2016-06-20 12:44:38 -06:00
Gregory Nutt
43eb04bb8f Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
Gregory Nutt
d40a473f72 Without lowsyslog() *llwarn() is not useful. Eliminate and replace with *warn(). 2016-06-20 09:37:08 -06:00
Gregory Nutt
832efae5d8 Fix some debug output statements that were changed and lost their ll-ness 2016-06-18 09:41:55 -06:00
Gregory Nutt
3fa41c0f18 Kconfig files: Fix some dependencies that have CONFIG_ in the variable name 2016-06-17 19:30:19 -06:00
Gregory Nutt
0d3ecb3ddd Fix another victim of the mass name changes: xyz_errmonitor->xyz_dbgmonitor 2016-06-17 07:00:33 -06:00
Gregory Nutt
f35086dbf7 Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred. 2016-06-16 16:30:45 -06:00
Gregory Nutt
801d661423 Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred. 2016-06-16 15:10:57 -06:00
Gregory Nutt
0c8c7fecf0 Add _ to the beginning of all debug macros to avoid name collisions 2016-06-16 12:33:32 -06:00
Gregory Nutt
b7f0fbc073 Centralize definitions associated with CONFIG_DEBUG_RTC 2016-06-16 07:39:23 -06:00
Gregory Nutt
37b9742189 Centralize definitions associated with CONFIG_DEBUG_TIMER 2016-06-16 07:16:25 -06:00
Gregory Nutt
6b517ed017 Centralize definitions associated with CONFIG_DEBUG_WATCHDOG 2016-06-16 06:28:04 -06:00
Gregory Nutt
5c89b18af8 Centralize definitions associated with CONFIG_DEBUG_I2C 2016-06-15 16:30:12 -06:00
Gregory Nutt
ba03134bed Centralize definitions associated with CONFIG_DEBUG_SPI 2016-06-15 10:41:13 -06:00
Gregory Nutt
a97d3ae707 Centralize definitions associated with CONFIG_DEBUG_GPIO 2016-06-15 09:20:23 -06:00
Gregory Nutt
c4e6f50eac Centralize definitions associated with CONFIG_DEBUG_IRQ 2016-06-15 08:35:22 -06:00
Gregory Nutt
0f249016a0 Eliminate some warnings 2016-06-13 14:01:32 -06:00
Gregory Nutt
eac916c907 Fix some warnings 2016-06-13 11:48:20 -06:00
Gregory Nutt
a1469a3e95 Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2 Rename *lldbg to *llerr 2016-06-11 14:55:27 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe Replace all occurrences of vdbg with vinfo 2016-06-11 11:59:51 -06:00
Gregory Nutt
3a74a438d9 Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO 2016-06-11 11:50:18 -06:00
Gregory Nutt
275f8988f8 Fix a cloned error in debug macro definitions 2016-06-10 10:13:30 -06:00
Gregory Nutt
ae1281d244 SAM4E AFEC: Fix some columnar alignement 2016-06-10 10:00:36 -06:00
OrbitalFox
78a2465af4 SAM4E: Fix some errors in AFEC header file. 2016-06-10 09:56:35 -06:00
Gregory Nutt
f65616f872 Replace confusing references to uIP with just 'the network' 2016-05-30 09:16:32 -06:00
Gregory Nutt
fa10927dcc Stefan Kolb's change to the SAMV7 Oneshot Timer (commit d44ecbcfbb) should also be applied to the SAM3/4 oneshot time since the drivers are identical. Here are the commit commits from Stefan's original change: 
"This is a fix to a problem in the handling of the oneshot timer. Due to a wrong assumption concerning the behavior directly after the start of the timer/counter the function sam_oneshot_cancel(…) calculates the wrong remaining time. The code assumes that the counter register is zero directly after the start of the timer, but this is not true. To start the time/counter a software trigger is invoked, this trigger starts the timer/count and sets the counter register to zero, but the reset of the counter register is not performed instantly. According to the datasheet: “The counter can be reset by a trigger. In this case, the counter value passes to zero on the next valid edge of the selected clock.” Thus the counter is set to zero between 0 and USEC_PER_TICK microseconds after the clock was started.

"In my fix I use the freerun count value to determine if at least one tick passed since the start of the timer and thus if the value of the oneshot counter is correct. I also tried to use the function up_timer_gettime(…) to achieve this but, at least if compiled with no optimization the problem vanishes without using the value of the function, the function call takes too long.

"Another problem treated in the fix is that if the oneshot timer/counter is canceled, we only know the remaining time with a precision of USEC_PER_TICK microseconds. This means the calculated remaining time is between 0 and USEC_PER_TICK microseconds  too long. To fix this I subtract one tick if the calculated remaining time is greater than one tick and otherwise set the remaining time to zero. By doing so the measured times are much more precise as without it."
 2016-05-29 08:25:41 -06:00
Gregory Nutt
9ec104834a Remove CONFIG_USARTn_ISUART 2016-05-25 11:21:48 -06:00
Gregory Nutt
2a87741e72 Rename CONFIG_ARCH_HAVE_UARTn to CONFIG_UARTn_SERIALDRIVER 2016-05-25 10:45:01 -06:00
Gregory Nutt
249a2e48e5 Rename CONFIG_ARCH_HAVE_USARTn to CONFIG_USARTn_SERIALDRIVER 2016-05-25 10:39:23 -06:00
David Sidrane
fca329945b This patch ensures that the TWIHS (i2c) hw get's its clock set when the sequence of 
sam_i2cbus_initialize
sam_i2cbus_uninitialize
sam_i2cbus_initialize

Or twi_reset is called.

I found this a while back in the stm32 family, so there may be more arch-es with this sort of bug. I suppose any driver that has the notion of "do not set the freq if it is already set" could be suspect.
 2016-05-23 13:38:34 -06:00
Gregory Nutt
f07ea1bb94 SAM (all): Fix several places in DMA logic where a spurious semicolon causes bad conditional logic 2016-05-11 17:26:59 -06:00
Gregory Nutt
8df80e6615 Kconfigs: All RNG selections also must select ARCH_HAVE_RNG 2016-03-30 07:56:03 -06:00
Gregory Nutt
4a8ac55c9d All SAM TWI: g_twiops should be both static and const 2016-03-09 18:11:55 -06:00
Gregory Nutt
51be83aa3a ARM: Fix missing header file. Update comments in all *_irq.c files. 2016-03-09 15:08:58 -06:00
Gregory Nutt
4d4f54a789 Rename current_regs to g_current_regs; For ARM, g_current_regs needs to be an array to support multiple CPUs 2016-03-09 13:41:48 -06:00
Gregory Nutt
9c63736c98 Standard some naming if code sectino comments 2016-02-21 18:06:09 -06:00
Gregory Nutt
666cc280f4 Rename irqenable() to up_irq_enable(); rename irqdisable() to up_irq_disable() 2016-02-14 16:54:09 -06:00
Gregory Nutt
83bc1c97c3 Rename irqsave() and irqrestore() to up_irq_save() and up_irq_restore() 2016-02-14 16:11:25 -06:00
Gregory Nutt
70e502adb0 Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section() 2016-02-13 19:11:09 -06:00
Gregory Nutt
a6eb9a351c Add spinlock support for ARMv7-M architectures 2016-02-09 13:44:22 -06:00
Gregory Nutt
03b382d443 SAM3/4, SAMA5, SAMv7 Tickless: Refuse to call lower-level timer logic if not yet initialized 2016-02-05 10:22:11 -06:00
Gregory Nutt
1166e311b0 Networking: Remove the HSEC argument from devif_timer. 2016-02-03 11:17:15 -06:00
Gregory Nutt
d2b2cd3415 Duplicate Manuel's EMAC driver fix to every other driver that supports CONFIG_NET_NOINTS 2016-02-03 10:33:22 -06:00
Gregory Nutt
1e4f2ae2c1 Rename up_i2c initialize and uninitialize functions using the correct MCU-specific naming 2016-02-02 12:08:23 -06:00
Gregory Nutt
d2571985ef I2C: up_i2creset should not be a global function; Now it is an I2C interface method 2016-02-02 11:21:45 -06:00
Gregory Nutt
0693e76be8 I2C: Remove the setfrequency method from the interface 2016-02-01 16:30:29 -06:00
Gregory Nutt
a64f36a63e I2C: Remove setaddress method 2016-02-01 12:14:20 -06:00
Gregory Nutt
ce988c7ed3 Remove the read and write methods from the I2C interface 2016-02-01 09:22:10 -06:00
Gregory Nutt
2171438c61 I2C_TRANSFER support is no longer optional 2016-01-31 14:00:53 -06:00
Gregory Nutt
531d73af41 Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s. 2016-01-30 08:35:46 -06:00
Gregory Nutt
9f9b85a932 Move include/nuttx/i2c.h to include/nuttx/i2c/i2c_master.h 2016-01-30 07:59:44 -06:00
Gregory Nutt
3b6a502eff For LK MCUs, rename up_spiinitialize to kl_spibus_initialize 2016-01-26 16:19:03 -06:00
Gregory Nutt
d16978be7f For SAM MCUs, rename up_spiinitialize to sam_spibus_initialize 2016-01-26 13:03:17 -06:00
Gregory Nutt
c0fb4e34a7 I2C: Eliminate the I2C_WRITEREAD method 2016-01-26 10:23:09 -06:00
Gregory Nutt
b7cbbab761 Remove CONFIG_SPI_OWNBUS: Now it is not just a good idea, it is the law 2016-01-23 18:10:21 -06:00
Gregory Nutt
4bd6adb725 Add dummy hwfeatures method to all SPI interfaces 2016-01-23 15:09:38 -06:00
Gregory Nutt
dfec6a0dd0 Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU 2015-12-14 13:56:21 -06:00
Gregory Nutt
daea1e614b All architectures need to build ELF support if either CONFIG_ELF or CONFIG_MODULE are selected. Cortex-M7 also must support module cache corherence 2015-12-12 09:35:05 -06:00
Gregory Nutt
25a2e17347 Rename up_rtcinitialize to up_rtc_initialize so that it looks like other RTC interfaces 2015-11-20 08:27:04 -06:00
Paul A. Patience
52454cf79b Fix typo 2015-11-11 13:06:15 -05:00
Gregory Nutt
1c79e77811 ARMv7-M: Minor naming change to improve readability 2015-11-06 11:24:52 -06:00
Gregory Nutt
f6d7da24a7 SAM4CM should advertise that it supports Tickless operation in Kconfig 2015-11-02 06:39:24 -06:00
Gregory Nutt
b28e32e3d3 Rename board_led_on to board_autoled_on 2015-11-01 09:07:06 -06:00
Gregory Nutt
ef5f3dcff4 SAM3/4 RTC: Fix a bungled change from a recent commit 2015-10-08 19:21:35 -06:00
Gregory Nutt
beb060d422 Yet more spacing issues 2015-10-07 20:24:19 -06:00
Gregory Nutt
b6638315a4 Correct some spacing issues 2015-10-07 11:39:06 -06:00
Gregory Nutt
2ab66a015b Cosmetic fixes to C coding style 2015-10-05 17:28:26 -06:00
Gregory Nutt
3fdd914203 Costmetic fixes to C coding style 2015-10-05 17:13:53 -06:00
Gregory Nutt
6fc6d17760 Fix some spacing problems 2015-10-04 14:59:08 -06:00
Gregory Nutt
7ced84c5f0 Standardize the width of all comment boxes in C files 2015-10-03 07:25:03 -06:00
Gregory Nutt
36726b1bc4 Standardize the width of all comment boxes in header files 2015-10-02 17:42:29 -06:00
Gregory Nutt
39859a9645 All ARMV7-M: Force 8-byte stack alignment when calling from assembly to C to interrupt handling 2015-09-15 07:37:09 -06:00
Gregory Nutt
f7ca98c5ae Fix error in almost all ARMv7-M interrupt stack handling 2015-09-14 07:07:13 -06:00
Gregory Nutt
36f1d84374 Remove some nonfunctional logic that also generates warnings 2015-09-08 13:02:33 -06:00
Gregory Nutt
2913aac866 Eliminate warnings 2015-09-08 10:20:41 -06:00
Gregory Nutt
975d912b40 Cosmetic: Move # of pre-processior command to column 1 2015-09-05 09:07:37 -06:00
Paul A. Patience
a0dc724a5d Correct #if to #ifdef when the macro can be undefined. Fix bug in AT32UC3 clock initialization: AVR32_CLOCK_PLL_OSC1 should be AVR32_CLOCK_PLL0_OSC1 and AVR32_CLOCK_PLL1_OSC1. 2015-09-01 13:47:06 -04:00
Gregory Nutt
70f1a49fbe arch/arm/src/up_iternal.h and several ARM Make.defs files: In the original implementation, NOT defined(CONFIG_ARMV7M_CMNVECTOR) was a sufficient test to determine if lazy floating point register saving was being used. But recents changes added common lazy register as well so now that test must be (NOT defined(CONFIG_ARMV7M_CMNVECTOR) || defined(CONFIG_ARMV7M_LAZYFPU)). 2015-08-31 08:40:02 -06:00
Gregory Nutt
da6c5aabdf All ARMV7-M IRQ setup: Always set the NVIC vector table address. This is needed in cases where the code is running with a bootload and when the code is running from RAM. It is also needed by the logic of up_ramvec_initialize() which gets the vector base address from the NVIC. Suggested by Pavel Pisa 2015-08-21 08:42:24 -06:00
Gregory Nutt
ba6c0b3fa3 Fix more common typos 2015-08-16 11:06:29 -06:00
Gregory Nutt
e29220183a Fix some common typos 2015-08-16 10:59:10 -06:00
Max Neklyudov
b13e182099 Correct some problems with SAM3/4 watchdog driver. Includes some small improvements. From Max Neklyudov. 2015-07-21 07:15:39 -06:00
Gregory Nutt
1f5e16dc95 Fix some warnings/errors detected by nuttx/tools/testbuilds.sh 2015-07-10 18:41:26 -06:00
Gregory Nutt
b8976adfb3 SAM4L: GPIO interrupts are not yet supported; can't compile sam_gpioirq.c yet 2015-07-03 09:33:52 -06:00
Gregory Nutt
fb926e7283 Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Max Neklyudov
8438b8eee8 SAM3/4: Add a TWI driver for the SAM4CM. From Max Neklyudov. 2015-06-22 09:32:15 -06:00
Max Neklyudov
0f19a33b3d SAM4CM: Fix SUPC register definitions. From Max Neklyudov 
Remove conditional logic form non-SAM4CM parts (Gregory Nutt)
 2015-06-22 06:52:57 -06:00
Max Neklyudov
e4d7b311b7 sam4cm: add CFB and MAC AES modes. From Max Neklyudov 2015-06-22 06:42:37 -06:00
Max Neklyudov
bdf0b6a9ab Back out an error introduced with commit 02c33f66c5a8be774034cd40e4125e9323c7b4d8. Causes an infinite loop in up_lowputc(). From Max Neklyudov. 2015-06-22 06:19:45 -06:00
Gregory Nutt
75077f4728 SAML21: Add DMA descriptor management logic 2015-06-14 08:48:25 -06:00
Gregory Nutt
8c8b2d926b SAMD21: Add build framework for DMA support. Nothing there yet except for skeletal logic taken from SAM3/4. 2015-06-13 15:06:37 -06:00
Gregory Nutt
29136e51cc Clean up and review of header files for conformance to standards 2015-06-12 19:26:01 -06:00
Gregory Nutt
7bd3d5eaf1 Clean up and review of header files for conformance to standards 2015-06-12 19:00:52 -06:00
Gregory Nutt
46148524a9 SAM4S/4E: Eand default loop optimiozation if EEFC_FMR configuration. From Marco Aurélio da Cruz 2015-06-11 14:35:49 -06:00
Gregory Nutt
f055d4cac4 Logic that samples the free running counter reads the pending interrupt status regsiter and can cause interrupts to be lost. So, if when the status regsiter is read, the logic must also handle the timer overflow event. Found and fixed by Max Neklyudov 2015-05-26 08:09:10 -06:00
Gregory Nutt
d1aae43e2a SAM4CM: Add support for optical mode for UART1. From Max Neklyudov. 2015-05-23 06:48:36 -06:00
Gregory Nutt
790d53bb06 SAM3/4 Serial: In NONBLOCKING mode serial does not receive bytes from UART. This happens because RX interrupt was disabled in the setup routine. To fix this I save interrupt configuration before uart shutdown and restore it after. From Max Neklyudov. 2015-05-21 07:06:47 -06:00
Gregory Nutt
b8483aea40 In go_os_start that sets the IDLE thread stack coloration, mov does not set condition codes which are tested by the following beq. Need to use movs instead. Noted by David Sidrane 2015-05-07 20:36:08 -06:00
Gregory Nutt
5f113517f6 Fix a few typos in comments 2015-05-06 15:26:07 -06:00
Gregory Nutt
40c1484848 Correct some cloned typos involving EHCI 2015-04-27 14:03:24 -06:00
Gregory Nutt
d77a19f0a2 Two r's and only two r's in the word interrupt 2015-04-23 14:04:43 -06:00
Gregory Nutt
8172e4cec1 More places where watchodg mispelled 2015-04-15 21:36:30 -06:00
Gregory Nutt
6b7a0cb3b8 Revert commit b80e8be652dfa52e97daa65aa3e550cf31cb2409 2015-04-12 06:26:50 -06:00
Gregory Nutt
9ece96b6d3 Remove all traces of CONFIG_ARMV7M_STACKCHECK 2015-04-11 10:01:44 -06:00
Gregory Nutt
929ea217c7 Remove executable flag from more .c and .h files 2015-04-09 08:20:57 -06:00
Gregory Nutt
a93913c0f4 SAMA5 Serial: Reading IMR and disabling interrupt must be atomic 2015-04-08 15:27:31 -06:00
Gregory Nutt
35312b31f9 SAM3/4 and SAMV7 UART: The IMR register is read-only. This means that sam_restoreints() does not actually re-enable UART interrupts. 2015-04-08 15:04:10 -06:00
Gregory Nutt
27bb133294 SAM3/4 and SAMV7 Serial: Serial interrupts left disabled. 
A side-effect of changing serial settings via TERMIOS (such as tcsetattr) is that serial interrupts were being left disabled.  This is not a problem if the serial configuration is changed when there are no open references to the serial device.  In that case, serial interrupts are disabled and will not be enabled enabled until the serial device is first opened.  But it is fatal if the serial device is already opened and if there is a task waiting to receive data.  In that case, the side-effect of disabling interrupts is fatal:  That task is then left hanging with interrupts disabled.
 2015-04-08 14:14:01 -06:00
Gregory Nutt
ae15c6963c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
Gregory Nutt
69d2d77424 Move include/nuttx/timer.h, rtc.h and watchdog.h to include/nuttx/timers/. 2015-04-01 12:37:44 -06:00
Gregory Nutt
e68baa3073 Include chip/sam_spi.h in sam_spi.h 2015-03-20 11:09:36 -06:00
Gregory Nutt
8d31651a1b Bringing PPPD yet closer to the NuttX coding style 2015-03-11 18:47:04 -06:00
Gregory Nutt
d8a99fb73f SAMV71-XULT: Enable 64-bit floating point support 2015-03-11 12:30:14 -06:00
Gregory Nutt
ed0fa0358c SAMV7: Add PIO register definition header file 2015-03-08 17:34:26 -06:00
Gregory Nutt
bbf80bbd5d SAMV71: Add pin mapping definitions 2015-03-08 13:24:32 -06:00
Gregory Nutt
5b72858f0c SAMV71: Add UART register definition header file 2015-03-08 08:42:22 -06:00
Gregory Nutt
2571d6202d SAMV71-XULT: Add heap allocation logic 2015-03-07 11:46:54 -06:00
Gregory Nutt
b1cecdd3ea SAMV7: Add interrupt-related logic 2015-03-07 11:16:44 -06:00
Gregory Nutt
7f92f22167 SAMV71: Add Supply Controller register definition header file 2015-03-06 15:27:51 -06:00
Gregory Nutt
7113de4d18 SAMV71: Add PMC register definition header files 2015-03-06 14:58:13 -06:00
Gregory Nutt
9bcdf974a0 Add new common lazy FPU state saving option for ARMv7-M. Not yet verified 2015-03-06 08:26:43 -06:00
Gregory Nutt
3b798f6ef1 SAM3/4: Leverage some start-up logic from STM32 2015-03-05 17:45:13 -06:00
Gregory Nutt
f4ec5efe3a SAMV71: Add memory map header file 2015-03-05 15:47:29 -06:00
Gregory Nutt
67c21e6817 SAMV7 Kconfig: Add peripheral selections 2015-03-05 13:51:39 -06:00
Gregory Nutt
5158e10bc2 Fix two uses of DEBUG_COLORATION vs STACK_COLORATION (from David Sidrane). Also some corrected comments 2015-03-05 06:41:14 -06:00
Gregory Nutt
429863f348 arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions 2015-02-27 17:19:38 -06:00
Gregory Nutt
59412f25ce SAM4CM free-running time: Change overflow type from uint16 to uint32. From Max Neklyudov. 2015-02-25 08:12:31 -06:00
Gregory Nutt
70c8ff6581 Eliminate some warnings 2015-02-25 08:05:35 -06:00
Gregory Nutt
ff6b34967b Fix a compilation error. From Macs Neklyudov 2015-02-16 14:30:15 -06:00
Gregory Nutt
501bc15fbd RTC: Remove all backdoor interfaces from rtc.h 2015-02-13 08:41:34 -06:00
Gregory Nutt
9e6cd16a8b SAM4 Ethernet Driver: No supports operation using the high priority work queue so that packet processing can occur outside of interrupt level processing. 
SAM4E-EK: The nsh configuration now configures the Ethernet driver for execution on the HP work thread.
 2015-02-10 11:10:55 -06:00
Gregory Nutt
8b0d9fb456 Fix some warning 2015-02-09 18:24:31 -06:00
Gregory Nutt
0a6ae631dc Clone the SAMA5D4 IPv6 support to the SAM4E EMAC and SAMAd3 EMAC and GMAC drivers. 2015-02-09 17:16:55 -06:00
Gregory Nutt
d08e29e0a0 Remove and extra endif from the Kconfig 2015-02-03 12:46:40 -06:00
Gregory Nutt
5189cddef2 Convert the 64-bit usec limit to a 32-bit tick limit 2015-02-03 07:18:17 -06:00
Gregory Nutt
f017f4c8a8 SAM4CM: Add support for tickless operation 2015-02-03 07:00:54 -06:00
Gregory Nutt
30b141e2c8 Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless 2015-01-24 06:49:51 -06:00
Gregory Nutt
e8f266001d Add CONFIG_STACK_COLORATION that does the same thing as CONFIG_DEBUG_STACK but without enabling debug. From David Sidrane 2015-01-24 06:03:39 -06:00
Gregory Nutt
9588b0e7a7 All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called 2015-01-21 11:36:33 -06:00
Gregory Nutt
723b7fc430 Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address. 2015-01-20 15:52:25 -06:00
Gregory Nutt
f6063c3896 Networking: Add missing raw/packet socket support to all Ethernet drivers 2015-01-20 15:14:29 -06:00
Gregory Nutt
07132f462f Ethernet drivers: Use IFF_IS_IPv4 macro. Cannot rely on the EtherType being set correctly. 2015-01-20 06:26:14 -06:00
Gregory Nutt
ac69e11a5f Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received 2015-01-15 09:31:23 -06:00
Gregory Nutt
836a8b1625 - Rename devif_input() ipv4_input() 
- Copy net/devif/devif_input.c to ipv6_input.c.  Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c.  Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
 2015-01-15 08:03:56 -06:00
Gregory Nutt
6bc54c3541 Networking: Condition certain ARP logic on CONFIG_NET_ARP in all Ethernet drivers 2015-01-15 07:07:39 -06:00
Gregory Nutt
fe4e3f4529 Tiva Timer: Timer test must attach a timer handler or the timer is stopped at the first interrupt 2015-01-13 15:55:54 -06:00
Gregory Nutt
727a7c9e40 Fixes for more issues found by cppcheck 2014-11-24 17:00:26 -06:00
Gregory Nutt
7ab214d811 SAM EMAC: Fix typo in the check for successfull allocation of a timer 2014-11-18 14:20:31 -06:00
Gregory Nutt
2330c9c842 Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all MCU Ethernet drivers 2014-11-16 08:10:06 -06:00
Gregory Nutt
83e5ee1c04 SAM3/4: Add missing SPI0 clock configuartion macro for the SAM4S 2014-11-16 06:43:08 -06:00
Gregory Nutt
bf984b2b3a Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday 2014-11-15 08:22:51 -06:00
Gregory Nutt
493ba46ec6 Fix typo is SAM4E pinmap file 2014-11-03 11:59:53 -06:00
Gregory Nutt
0eaa74962c Costmetic changes -- spacing, comments. 2014-10-30 16:33:40 -06:00
Gregory Nutt
05c1d9707d SAM3/4: Fix error serial TERMIOS ioctl handling 2014-10-30 12:23:15 -06:00
Gregory Nutt
11ab9c908e Add support for SAM3/4 basic TERMIOS and flow control. There are issues with IFLOW control: PDC or DMAC support is required 2014-10-29 15:47:15 -06:00
Gregory Nutt
4098d8c4a2 SAM4: Fix a usbnsh build problem that has crept into all serial drivers 2014-10-28 15:44:47 -06:00
Gregory Nutt
103e5dc791 SAM4E: Fix error TC header file 2014-10-28 09:22:37 -06:00
Gregory Nutt
1a532c1744 SAM4E-EK: Add support for PHY insterrupt 2014-10-24 12:28:57 -06:00
Gregory Nutt
2e829a5ff8 Another fix to SAM3/4 GPIO IRQ issue 2014-10-24 10:55:52 -06:00
Gregory Nutt
96405b1913 SAM3/4: Fix conditional compilation in GPIO IRQ logic 2014-10-24 10:44:43 -06:00
Gregory Nutt
8dfb3a1dd0 SAM4E: Fix options to select GPIO interrupts in Kconfig 2014-10-24 09:29:01 -06:00
Gregory Nutt
e409b64bdc Only SAM4 family has RTTDIS bit in the MR register. SourceForge bug #33 from Fabien Comte 2014-09-17 07:42:12 -06:00
Gregory Nutt
068115e7d6 SAM3X/Arduino Due: Fix typo in sam3x_periphclks.h; add SCLK definitions to board.h header file. From Fabien Comte 2014-09-08 06:14:59 -06:00
Gregory Nutt
31b8137956 There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing. 2014-09-01 15:39:34 -06:00
Gregory Nutt
10ca085b09 Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
Gregory Nutt
fcd7b9336e Rename kfree to kmm_free for consistency with other naming conventions 2014-08-31 17:04:02 -06:00
Gregory Nutt
bcb5a5316e Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming 2014-08-31 16:24:24 -06:00
Gregory Nutt
1643c35609 Rename kufree to kumm_free for consistency with other naming 2014-08-31 16:15:11 -06:00
Gregory Nutt
31608cd434 Rename kmemalign to kmm_memalign for consitency with other naming 2014-08-31 14:57:31 -06:00
Gregory Nutt
e11679acf8 Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
2bc16b2ba5 wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide. 2014-08-21 11:16:55 -06:00
Gregory Nutt
96e1bf0ec2 NSH link management now works! The last fix was to the Ethernet drivers: They cannot disable clocking to the Ethernet blok on ifdown. Otherwise, we cannot communicate with the PHY 2014-08-17 17:54:46 -06:00
Gregory Nutt
754541a381 Change the way PHY interrupts work: disable automatically. Then we have to re-subscribe each time after the interrupt fires 2014-08-17 16:51:56 -06:00
Gregory Nutt
2fab4eaa5a In order to get PHY interrupts, they must be enabled at the PHY (still don't get PHY interrupts) 2014-08-17 13:03:18 -06:00
Gregory Nutt
e0ef5a08bc For all SAM Ethernet, need to enable management interface before reading PHY regisers in IOCTL 2014-08-17 11:09:54 -06:00
Gregory Nutt
2edcca009c SAM3/4 Ethernet: Clone ioctl support from the SAMA5 2014-08-17 06:54:37 -06:00
Gregory Nutt
6455f60c60 Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures 2014-08-08 18:39:28 -06:00
Gregory Nutt
4dc151097e Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h 2014-08-08 17:53:55 -06:00
Gregory Nutt
1c99d53bb1 Move clock functions from sched/ to sched/clock 2014-08-08 14:43:02 -06:00
Gregory Nutt
39183d37b8 Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors 2014-08-07 18:00:38 -06:00
Gregory Nutt
594083d870 Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined. 2014-08-06 16:26:01 -06:00
Gregory Nutt
194f9721f7 SAM3/4: Fix compile of sam_aes.c if CONFIG_CRYPTO_AES is defined. rom Max Nekludov 2014-07-07 08:03:18 -06:00
Gregory Nutt
d7fe256821 NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed. 2014-07-04 19:13:08 -06:00
Gregory Nutt
99ce3a44d7 Remove all inclusion of uip.h 2014-07-04 16:58:22 -06:00
Gregory Nutt
11e3a21411 NET: More renaming 2014-07-04 15:40:49 -06:00
Gregory Nutt
1211bbd904 Move crypto header files from include/crypto to include/nuttx/crypto 2014-07-03 18:35:08 -06:00
Gregory Nutt
ca1d7d0f32 Correct authorship on a few files 2014-07-03 18:28:26 -06:00
Gregory Nutt
7f5ea07329 Move cypto debug definitions to debug.h with other susbsystem-level debug 2014-07-03 07:58:43 -06:00
Gregory Nutt
4c03534f9c SAM4 AES driver from Max Neklyudov 2014-07-03 07:26:44 -06:00
Gregory Nutt
fb44a97359 SAM Ethernet: Eliminate a warning 2014-07-02 17:35:41 -06:00
Gregory Nutt
e7aa949380 SAM3/4 and SAMA5 Ethernet: Fix an error in the function that determines the number of free TX descriptors 2014-07-02 10:40:11 -06:00
Gregory Nutt
f5abca3952 SAMA54D-EK: Don't disable any features in the NSH configuration. Comments updated in several files 2014-07-02 08:54:53 -06:00
Gregory Nutt
313982ba18 NET: Rename XYZ_uiptxpoll to just XYZ_txpoll 2014-07-01 18:41:08 -06:00
Gregory Nutt
289dc6dc71 SAMA5D4: Fix error in EMAC driver (plus related EMAC/GMAC drivers) 2014-07-01 11:22:19 -06:00
Gregory Nutt
621ec21bfd Rename uip_poll->devif_poll and uip_timer->devif_timer 2014-06-30 18:40:41 -06:00
Gregory Nutt
ade8807a61 Rename uip_input to devif_input 2014-06-30 18:11:17 -06:00
Gregory Nutt
e4990dda4d Rename uip_driver_s net_driver_s 2014-06-27 16:48:12 -06:00
Gregory Nutt
72d8a6a7ef SAM4CM: Fixes from Macs N 2014-06-27 12:27:02 -06:00
Gregory Nutt
b26d5d2191 SAM4CM: Add IPC register header file. From Macs N 2014-06-27 12:02:30 -06:00
Gregory Nutt
57383ea2f3 Rename ip_eth_hdr to eth_hdr_s 2014-06-25 09:57:52 -06:00
Gregory Nutt
fae790a6dc Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
Gregory Nutt
11896e1481 Move the remaining files from include/nuttx/net/uip to include/nuttx/net; Rename *_internal.h header files in net/ to just *.h 2014-06-24 10:14:15 -06:00
Gregory Nutt
b34a1f1e01 Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/netdev.h 2014-06-24 09:28:44 -06:00
Gregory Nutt
22a36b7af3 SAMA5D4: Add EMAC driver 2014-06-11 12:23:31 -06:00
Gregory Nutt
407e72b300 Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/arp.h; rename all uip_arp_ functions to arp_ 2014-05-30 12:13:06 -06:00
Gregory Nutt
b77854f245 SAM4E GPIO: Fix some compile errors when CONFIG_DEBUG_GPIO is enabled 2014-05-15 11:41:58 -06:00
Gregory Nutt
43fd4676da SAM4E: PIO definition clean-up 2014-05-12 18:42:25 -06:00
Gregory Nutt
af2bb81ac2 Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna 2014-05-08 09:00:33 -06:00
Gregory Nutt
f72a873af9 Add SAM3/4 RTT driver. From Bob Doiron 2014-05-05 14:35:37 -06:00
Gregory Nutt
e317cef653 The CONFIG_SYSTEMTICK_EXTCLK selection should only be available on systems that support it 2014-04-30 15:32:06 -06:00
Gregory Nutt
f804bf80e5 Updated system timer logic from Bob Doiron 2014-04-30 14:46:26 -06:00
Gregory Nutt
91d94a0b03 SAM3/4: Enhanced timer/counter driver from Bob Doiron 2014-04-30 14:10:02 -06:00
Gregory Nutt
e4fd434a60 Cosmetic update to comments and README files 2014-04-24 12:44:30 -06:00
Gregory Nutt
f62eef1af6 Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few) 2014-04-22 13:42:38 -06:00
Gregory Nutt
6e72b0fb0f Back out a bad change in the last commit + add missing SAM4S Xplained Pro file 2014-04-22 11:04:31 -06:00
Gregory Nutt
6e94a4e1e2 Misc changes to get a clean compilation after incorporating all of Bob Doison's changes 2014-04-22 10:38:08 -06:00
Gregory Nutt
9f9f790d0a SAM3/4 T/C driver updated to get closer to coding standard 2014-04-22 09:10:32 -06:00
Gregory Nutt
75f64beb80 Various SAM4S related fixes, mostely related to the timer driver driver and the SAM4S timer/counter. All from Bob Doisin 2014-04-22 09:01:20 -06:00
Gregory Nutt
d09c57eade examples/serialrx added by Bob Doison 2014-04-22 08:40:48 -06:00
Gregory Nutt
13292c70c2 Misc SAM4S-related changes from Bob Doison 2014-04-21 19:32:15 -06:00
Gregory Nutt
f52ff8cf7b SAM3/4: Add watchdog timer support. From Bob Doisin 2014-04-21 19:10:06 -06:00
Gregory Nutt
5eadd8df7a SAM3/4: Support for PDC based HSMCI ADMA from Bob Doiron 2014-04-21 17:18:30 -06:00
Gregory Nutt
b0f4941c77 SAM4S: Fix error in macro that disabled peripheral clocking. From Bob Doiron 2014-04-21 17:06:01 -06:00
Gregory Nutt
d16ea614e9 SAM3/4 RTC driver from Bob Doiron 2014-04-21 17:04:22 -06:00
Gregory Nutt
44e7688151 SAM3/4 RTC driver from Bob Doiron 2014-04-21 17:03:57 -06:00
Gregory Nutt
99639f2d48 SAM3/4 Interrupt initialization. Default interrupt priority not being set correctly 2014-04-17 14:02:22 -06:00
Gregory Nutt
fd08872892 Costmetic changes to some comments 2014-04-14 16:36:07 -06:00
Gregory Nutt
25d4ff745b More trailing whilespace removal 2014-04-13 16:22:22 -06:00
Gregory Nutt
c708eff608 Make sure that there is one space after for 2014-04-12 13:28:22 -06:00
Gregory Nutt
43abe85674 Updated README files and comments 2014-04-07 07:43:28 -06:00
Gregory Nutt
77c968e36a Kconfig: Remove warnings. ARCH_RAMFUNCS depends on ARCH_HAVE_RAMFUNCS, so it is not possible to select ARCH_RAMFUNCS wihtout ARCH_HAVE_RAMFUNCS 2014-04-04 16:26:24 -06:00
Gregory Nutt
32ca368f16 Fix a warning that happens with debug is disabled 2014-03-26 16:32:38 -06:00
Gregory Nutt
e5360ef5d9 SAM4E CMCC: Fix some errors introducted in last check-in 2014-03-26 16:32:16 -06:00
Gregory Nutt
8f7d58c011 Eliminate some warnings 2014-03-26 16:31:26 -06:00
Gregory Nutt
67695a2248 SAM3/4: SPI and HSCMI drivers with now use the CMCC is available; The SPI driver will now handle word sizes greater than 8-bits 2014-03-26 13:19:44 -06:00
Gregory Nutt
be88e99ec8 SAM4E USP: Re-vamp read request queue handling. Add logic to handle RX overrun errors 2014-03-26 11:38:47 -06:00
Gregory Nutt
d2001a1dc3 tools/astyle.sh: Formatting tool based on logic from Lorenz Meier 2014-03-26 08:50:48 -06:00
Gregory Nutt
9a724d8b36 backport a serial console fix from the sam4e to the sama5d3 2014-03-25 14:34:07 -06:00
Gregory Nutt
9b5e800cc0 SAM3/4 CMCC: if region to be invalidate is bigger than that cache, then invalidate all 2014-03-25 14:25:22 -06:00