since the internal function normally return the error code directly
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ifccbcfb07d2f8f7d5fef1b2a867538f51b73655c
In current implementation, the asynchronous call "epoll_ctl()" unable
to wakeup the thread if pending on "epoll_wait()", the newly
added/delete FD cannot be used in the current waiting list,
this patch uses a reserved file object to wake up pending poll internal,
re-traverse the waiting list when a new event comes.
Signed-off-by: chao.an <anchao@xiaomi.com>
wget is missing from some system (like macOS and Windows native),
it's better to use curl to simplify build environment.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
since the stdin, stdout and stderr may initialize later
in userspace if CONFIG_DEV_CONSOLE isn't enabled.
Note: it isn't bigger issue here to skip the check because
vfs will check the validation again in read and write syscall
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Deadlock during recursive access if unionfs overlays procfs,
check the critical segment only and remove the useless protection part.
|#0 unionfs_statfs (mountpt=0xf3df4540, buf=0xf3de2f0c) at unionfs/fs_unionfs.c:2136
...
|#6 0x08069429 in procfs_read (filep=0xf3df4574, buffer=0xf3df4610 "...", buflen=1024) at procfs/fs_procfs.c:412
|#7 0x0806c339 in unionfs_read (filep=0xf3de219c, buffer=0xf3df4610 "...", buflen=1024) at unionfs/fs_unionfs.c:1026
original call stack:
(gdb) bt
|#0 unionfs_statfs (mountpt=0xf3df4540, buf=0xf3de2f0c) at unionfs/fs_unionfs.c:2136
|#1 0x08071629 in mountpoint_filter (node=0xf3df4540, dirpath=0xf3df4a28 "/proc", arg=0xf3de2fc4) at mount/fs_foreachmountpoint.c:119
|#2 0x0807171b in foreach_inodelevel (node=0xf3df4540, info=0xf3df4a20) at inode/fs_foreachinode.c:90
|#3 0x08071898 in foreach_inode (handler=0x8071530 <mountpoint_filter>, arg=0xf3de2fc4) at inode/fs_foreachinode.c:193
|#4 0x080716c1 in foreach_mountpoint (handler=0x8070e2f <blocks_entry>, arg=0xf3de300c) at mount/fs_foreachmountpoint.c:169
|#5 0x08071399 in mount_read (filep=0xf3df4574, buffer=0xf3df4610 "...", buflen=1024) at mount/fs_procfs_mount.c:537
|#6 0x08069429 in procfs_read (filep=0xf3df4574, buffer=0xf3df4610 "...", buflen=1024) at procfs/fs_procfs.c:412
|#7 0x0806c339 in unionfs_read (filep=0xf3de219c, buffer=0xf3df4610 "...", buflen=1024) at unionfs/fs_unionfs.c:1026
|#8 0x080657a2 in file_read (filep=0xf3de219c, buf=0xf3df4610, nbytes=1024) at vfs/fs_read.c:110
|#9 0x0806581a in nx_read (fd=3, buf=0xf3df4610, nbytes=1024) at vfs/fs_read.c:175
|#10 0x08065847 in read (fd=3, buf=0xf3df4610, nbytes=1024) at vfs/fs_read.c:206
|#11 0x0805a242 in nsh_catfile (vtbl=0xf3df3f10, cmd=0xf3df4378 "df", filepath=0x808d5ed "/proc/fs/blocks") at nsh_fsutils.c:116
|#12 0x0805b1de in cmd_df (vtbl=0xf3df3f10, argc=1, argv=0xf3de32c0) at nsh_mntcmds.c:73
|#13 0x08056370 in nsh_command (vtbl=0xf3df3f10, argc=1, argv=0xf3de32c0) at nsh_command.c:1061
|#14 0x08053b16 in nsh_execute (vtbl=0xf3df3f10, argc=1, argv=0xf3de32c0, redirfile=0x0, oflags=0) at nsh_parse.c:741
|#15 0x08055998 in nsh_parse_command (vtbl=0xf3df3f10, cmdline=0xf3df4378 "df") at nsh_parse.c:2578
|#16 0x08055a7b in nsh_parse (vtbl=0xf3df3f10, cmdline=0xf3df4378 "df") at nsh_parse.c:2662
|#17 0x0805d691 in nsh_session (pstate=0xf3df3f10, login=1 '\001', argc=1, argv=0xf3de34b0) at nsh_session.c:191
|#18 0x0805b542 in nsh_consolemain (argc=1, argv=0xf3de34b0) at nsh_consolemain.c:115
|#19 0x0805346c in nsh_main (argc=1, argv=0xf3de34b0) at nsh_main.c:168
|#20 0x0805075a in nxtask_startup (entrypt=0x805340a <nsh_main>, argc=1, argv=0xf3de34b0) at sched/task_startup.c:165
|#21 0x08049713 in nxtask_start () at task/task_start.c:144
|#22 0x00000000 in ?? ()
Change-Id: Ic4c7aff0ea50388a371c525745e817a787dabcca
Signed-off-by: chao.an <anchao@xiaomi.com>
The following nxstyle errors are not new.
(macros like SIZEOF_rpc_reply_readdir)
fs/nfs/nfs_vfsops.c:848:12: error: Mixed case identifier found
fs/nfs/nfs_vfsops.c:1020:16: error: Mixed case identifier found
fs/nfs/nfs_vfsops.c:1420:13: error: Mixed case identifier found
fs/nfs/nfs_vfsops.c:1818:11: error: Mixed case identifier found
fs/nfs/nfs_vfsops.c:1819:11: error: Mixed case identifier found
fs/nfs/nfs_vfsops.c:1830:8: error: Mixed case identifier found
fs/nfs/nfs_vfsops.c:1851:42: error: Mixed case identifier found
fs/nfs/nfs_vfsops.c:2049:54: error: Mixed case identifier found
fs/nfs/nfs_vfsops.c:2115:58: error: Mixed case identifier found
fs/nfs/nfs_vfsops.c:2172:54: error: Mixed case identifier found
The following nxstyle errors are intentionally left
because they are parts of the copyright notices.
fs/nfs/rpc_clnt.c:46:80: error: Long line found
fs/nfs/rpc_clnt.c:63:78: error: Long line found
This reverts commit 97be116a39.
This commit broke nxffs. This leaves the first block as empty which
then exposes another bug where when the pack is called because we
have reached the end of flash and need to look for deleted inodes
we search the first block find no inode and assume that there
are no more inodes. This then results in corrupting the filesystem
by writing over existing inodes.
This can be seen by runing the sim:nxffs configuration.
Prior to this commit the first pass of writing files would look like
this:
NXFFS Dump:
BLOCK:OFFS TYPE STATE LENGTH
0:5 INODE OK 2680
0:78 DATA OK 424
1:5 DATA OK 497
2:5 DATA OK 497
3:5 DATA OK 497
4:5 DATA OK 497
5:5 DATA OK 268
5:283 INODE OK 7410
5:425 DATA OK 77
6:5 DATA OK 497
With this commit:
NXFFS Dump:
BLOCK:OFFS TYPE STATE LENGTH
0:0 BLOCK ERASED 512
1:5 INODE OK 6394
1:39 DATA OK 463
2:5 DATA OK 497
3:5 DATA OK 497
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
The unique minor limit of 255 will overflow easily in
some scenarios where eventfd needs to be create/destroy
frequently:
while (1)
{
fd = eventfd(0, 0); // minor++
sleep(1);
close(fd);
}
remove the unique minor limit.
Change-Id: I0ea1c825ce9b542c883166cb3e72574455ffdd0d
Signed-off-by: chao.an <anchao@xiaomi.com>
There is a good case on sim platform:
When we input some cmd and click enter key to start application in terminal,
this context will change to application from IDLE loop. Althrough entey key '\r'
has been received to recv buffer and complete post semaphore of reader, but
pollnotify may not be called because context change. So when application run
poll function, because no events happend and poll enter wait, context will
again change to IDLE loop, this pollnotify of IDLE loop will run to send poll
events, poll function of applicaton will wake up. It's wrong!
Change-Id: I812a889f2e90781a9c3cb4b0251cccc4d32bebd1
Signed-off-by: dongjiuzhu <dongjiuzhu1@xiaomi.com>
When just enable 'CONFIG_FS_HOSTFS', NODFS_SUPPORT may not enable.
Change-Id: I8317f18bf3ceae873e29c027561948c17b4aab38
Signed-off-by: zhongan <zhongan@xiaomi.com>
ensure the behaviour same before:
commit b76c4672d6 (origin/root)
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Tue Sep 15 17:42:42 2020 +0800
vfs: Create a node as the root of pseudo file system
to remove the special process for root
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
because:
1.The name of directory may terminated by the whitespace
2.inode_search can handle the trailing '/' correctly
3.Let fix the issue in FAT filesystem instead
This reverts commit 97b0235d77.
1.Reduce the default size of task_group_s(~512B each task)
2.Scale better between simple and complex application
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia872137504fddcf64d89c48d6f0593d76d582710
Or close the fd2 return by dup() would segment fault since filep->f_priv
null access.
Change-Id: I285c86f54bbb486d6c2c5aea53952f69083dca72
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
https://linux.die.net/man/2/epoll_ctl:
EPOLLONESHOT (since Linux 2.6.2)
Sets the one-shot behavior for the associated file descriptor.
This means that after an event is pulled out with epoll_wait(2)
the associated file descriptor is internally disabled and
no other events will be reported by the epoll interface.
The user must call epoll_ctl() with EPOLL_CTL_MOD to
rearm the file descriptor with a new event mask.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I6c0dc93e1cdae0e8cea5b487c7005de2da2c2ec3
fs/procfs/fs_procfs.c contained an unused reference to an STM32 procfs structure. This is wrong in two ways: (1) There should be not STM32 references outside of arch/arm and boards/arm and (2) the declare STM32 structure is not used anyway.
Linux Programmer's Manual
NAME
epoll_create, epoll_create1 - open an epoll file descriptor
...
SYNOPSIS
#include <sys/epoll.h>
int epoll_create1(int flags);
...
epoll_create1()
If flags is 0, then, other than the fact that the obsolete
size argument is dropped, epoll_create1() is the same as
epoll_create(). The following value can be included in flags
to obtain different behavior:
EPOLL_CLOEXEC
Set the close-on-exec (FD_CLOEXEC) flag on the new file
descriptor. See the description of the O_CLOEXEC flag in
open(2) for reasons why this may be useful.
https://man7.org/linux/man-pages/man7/epoll.7.html
since these function don't depend on standard input/output function
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I011a387a1e2c1360e8f37716d512bd32f93ad467
to save the preserved space(1KB) and also avoid the heap overhead
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I694073f68e1bd63960cedeea1ddec441437be025
This will resolve numerous problems with the way that hard links, in particular "." and ".." are handled. Instead of trying to fudge the stat flags, the correct implementation is to follow the hard link to the final link target node. That is what must determine the attributes of the directory entry.
This PR corrects an error in the ROMFS file system. The error occurred after following a hard link (depending on how the ROMFS image is organized). The error occurred because some of the information buffered before following the links was stale and, hence, out of sync after following the hard link. This would cause random errors when paths containing hardlinks were used with ROMFS.
This PR resolves Issue #1543. Please compare the following output with the output in Issue #1543 to see how the problem was resolved:
NuttShell (NSH) NuttX-9.1.0
nsh> mount
/etc type romfs
/proc type procfs
/tmp type vfat
nsh> ls -Rl /etc
/etc:
dr-xr-xr-x 0 .
dr-xr-xr-x 0 ..
-r-xr-xr-x 20 group
dr-xr-xr-x 0 init.d/
-r-xr-xr-x 35 passwd
/etc/init.d:
dr-xr-xr-x 0 .
dr-xr-xr-x 0 ..
-r-xr-xr-x 71 rcS
nsh> ls -l /etc/init.d
/etc/init.d:
dr-xr-xr-x 0 .
dr-xr-xr-x 0 ..
-r-xr-xr-x 71 rcS
nsh> ls -l /etc/init.d/.
/etc/init.d/.:
dr-xr-xr-x 0 .
dr-xr-xr-x 0 ..
-r-xr-xr-x 71 rcS
nsh> ls -l /etc/init.d/..
/etc/init.d/..:
dr-xr-xr-x 0 .
dr-xr-xr-x 0 ..
-r-xr-xr-x 20 group
dr-xr-xr-x 0 init.d/
-r-xr-xr-x 35 passwd
nsh> ls -l /etc/init.d/../.
/etc/init.d/../.:
dr-xr-xr-x 0 .
dr-xr-xr-x 0 ..
-r-xr-xr-x 20 group
dr-xr-xr-x 0 init.d/
-r-xr-xr-x 35 passwd
nsh>
New CONFIG_FAT_LFN_UTF8: UTF8 strings are converted to UCS2-LFN
Bugfix in fat_createalias: space is now also converted to underbar.
Change (bugfix) in fat_getlfname: init characters (0xff) and '\0' are rewound as well.
Found by clang-check:
mqueue/mq_close.c:127:21: warning: Value stored to 'rtcb' during its initialization is never read
FAR struct tcb_s *rtcb = (FAR struct tcb_s *)nxsched_self();
^~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
Found by clang-check:
mount/fs_mount.c:287:8: warning: Although the value stored to 'ret' is used in
the enclosing expression, the value is never actually read from 'ret'
(ret = find_blockdriver(source, mountflags, &drvr_inode)) >= 0)
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
Found by clang-check:
romfs/fs_romfs.c:431:7: warning: Value stored to 'bytesread' is never read
bytesread = 0;
^ ~
romfs/fs_romfs.c:455:11: warning: Value stored to 'sector' is never read
sector += nsectors;
^ ~~~~~~~~
2 warnings generated.
Make.dep file should be updated by .config changed after first make.
There are 2 cases affected for this problem:
1) Add source files by config symbol
2) Include header files in #ifdef directive
These 2 cases may not be included in Make.dep and this may prevent the
differential build from working correctly.
If a existing file is opened with overwriting mode e.g. fopen(file, "w+"),
the file size will be incorrect after writing any data to the file.
This bug is caused by previous commit 10903b5, and its changes should be
limited to only O_APPEND mode.
since the current implementation is really a symoblic link not hard link
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I59d30d0a620b0b5714fe91bbe90d4405cf53d187
The use of uint64_t primitive type in NFS structures forces the compiler to align data on an 8-byte boundary.
As a result of this, unwanted gaps being created, which causes NFS to fail. (e.g., nfs_read/initialize the request)
Using nfsuint64 instead of uint64_t fixes this issue.
Block and MTD drivers may be opened and managed as though they were character drivers. But this is really sleight of hand; there is a hidden character driver proxy that mediates the interface to the block and MTD drivers in this case.
fstat(), however, did not account for this. It would report the characteristics of the proxy character driver, not of the underlying block or MTD driver.
This change corrects that. fstat now checks if the character driver is such a proxy and, if so, reports the characteristics of the underlying block or MTD driver, not the proxy character driver.
The build gets broken when both the NFS and DEBUG_FS_ERROR configurations enabled. This tiny change fixes the compilation error.
Run file through nxstyle and correct issues.
NOTE: This line:
/* This logic just supports "//" sequences in the path name */
generates the false alarm error:
fs/nfs/nfs_util.c:84:39: error: C++ style comment
Functions within the OS must never set the errno value. fs_fdopen() was setting the errno value. Now, after some parameter changes, it reports errors via a negated errno integer return value as do most all other internal OS functions.
All complaints fixed except for those that were not possible to fix:
- Used of Mixed case identifier in ESP32 files. These are references to Expressif ROM functions which are outside of the scope of NuttX.
Since littlefs is in active development, it's not a good idea to use its
source code files directly. So upgrade littlefs v2.2.1 by using the littlefs
tar.gz release package instead.
Change-Id: I16d9cf0b6bca700a54ca86ed11d7c8c7f27a898f
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
lpc2148_spi1.c:142:24: warning: initialization of 'uint32_t (*)(struct spi_dev_s *, uint32_t)' {aka 'unsigned int (*)(struct spi_dev_s *, unsigned int)'} from incompatible pointer type 'uint16_t (*)(struct spi_dev_s *, uint16_t)' {aka 'short unsigned int (*)(struct spi_dev_s *, short unsigned int)'} [-Wincompatible-pointer-types]
142 | .send = spi_send,
| ^~~~~~~~
lpc2148_spi1.c:142:24: note: (near initialization for 'g_spiops.send')
In file included from ieee802154/mac802154_bind.c:49:
ieee802154/mac802154_internal.h: In function 'mac802154_setdevmode':
ieee802154/mac802154_internal.h:788:42: warning: converting a packed 'enum ieee802154_devmode_e' pointer (alignment 1) to a 'const union ieee802154_attr_u' pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
788 | (FAR const union ieee802154_attr_u *)&mode);
| ^~~~~~~~~~~~~~~~~
chip/stm32_hciuart.c: In function 'hciuart_read':
chip/stm32_hciuart.c:2104:30: warning: statement with no effect [-Wunused-value]
2104 | ntotal == (ssize_t)ret;
| ~~~~~~~^~~~~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_driver.c: In function 'bcmf_wl_auth_event_handler':
wireless/ieee80211/bcm43xxx/bcmf_driver.c:579:23: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
579 | type = bcmf_getle32(&event->type);
| ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_driver.c:580:25: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
580 | status = bcmf_getle32(&event->status);
| ^~~~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_driver.c: In function 'bcmf_wl_scan_event_handler':
wireless/ieee80211/bcm43xxx/bcmf_driver.c:619:25: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
619 | status = bcmf_getle32(&event->status);
| ^~~~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_driver.c:620:35: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
620 | escan_result_len = bcmf_getle32(&event->len);
| ^~~~~~~~~~~
wireless/ieee80211/bcm43xxx/bcmf_bdc.c: In function 'bcmf_bdc_process_event_frame':
wireless/ieee80211/bcm43xxx/bcmf_bdc.c:166:27: warning: taking address of packed member of 'struct bcmf_event_s' may result in an unaligned pointer value [-Waddress-of-packed-member]
166 | event_id = bcmf_getle32(&event_msg->event.type);
| ^~~~~~~~~~~~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c: In function 'sdio_io_rw_direct':
wireless/ieee80211/bcm43xxx/mmc_sdio.c:157:3: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
157 | ret = SDIO_RECVR5(dev, SD_ACMD52, (uint32_t *)&resp);
| ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
79 | begin_packed_struct struct sdio_resp_R5
| ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c: In function 'sdio_io_rw_extended':
wireless/ieee80211/bcm43xxx/mmc_sdio.c:239:11: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
239 | ret = SDIO_RECVR5(dev, SD_ACMD53, (uint32_t *)&resp);
| ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
79 | begin_packed_struct struct sdio_resp_R5
| ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:244:11: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
244 | ret = SDIO_RECVR5(dev, SD_ACMD53, (uint32_t *)&resp);
| ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
79 | begin_packed_struct struct sdio_resp_R5
| ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:257:7: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
257 | ret = SDIO_RECVR5(dev, SD_ACMD53, (uint32_t *)&resp);
| ^~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
79 | begin_packed_struct struct sdio_resp_R5
| ^~~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:265:3: warning: converting a packed 'struct sdio_resp_R5' pointer (alignment 1) to a 'uint32_t' {aka 'unsigned int'} pointer (alignment 4) may result in an unaligned pointer value [-Waddress-of-packed-member]
265 | SDIO_RECVR1(dev, SD_ACMD52ABRT, (uint32_t *)&resp);
| ^~~~~~~~~~~
wireless/ieee80211/bcm43xxx/mmc_sdio.c:79:28: note: defined here
79 | begin_packed_struct struct sdio_resp_R5
| ^~~~~~~~~~~~
chip/stm32_adc.c: In function 'adc_reset':
chip/stm32_adc.c:2860:7: warning: unused variable 'ret' [-Wunused-variable]
2860 | int ret;
| ^~~
chip/stm32_adc.c: In function 'adc_shutdown':
chip/stm32_adc.c:3044:7: warning: unused variable 'ret' [-Wunused-variable]
3044 | int ret;
| ^~~
chip/stm32_i2c.c:722:12: warning: 'stm32_i2c_sem_wait_noncancelable' defined but not used [-Wunused-function]
722 | static int stm32_i2c_sem_wait_noncancelable(FAR struct i2c_master_s *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
wireless/gs2200m.c: In function 'gs2200m_read':
wireless/gs2200m.c:727:20: warning: passing argument 1 of 'nxsem_wait' from incompatible pointer type [-Wincompatible-pointer-types]
727 | ret = nxsem_wait(dev);
| ^~~
| |
| struct gs2200m_dev_s *
.config:1207:warning: symbol value '' invalid for TESTING_OSTEST_FPUSIZE
platform/audio/cxd56_audio_analog.c:69:13: warning: inline function 'cxd56_audio_clock_is_enabled' declared but never defined
69 | inline bool cxd56_audio_clock_is_enabled(void);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
platform/audio/cxd56_audio_analog.c:68:13: warning: inline function 'cxd56_audio_clock_disable' declared but never defined
68 | inline void cxd56_audio_clock_disable(void);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
platform/audio/cxd56_audio_analog.c:67:13: warning: inline function 'cxd56_audio_clock_enable' declared but never defined
67 | inline void cxd56_audio_clock_enable(uint32_t clk, uint32_t div);
| ^~~~~~~~~~~~~~~~~~~~~~~~
chip/stm32_adc.c: In function 'adc_reset':
chip/stm32_adc.c:1348:7: warning: unused variable 'ret' [-Wunused-variable]
1348 | int ret;
| ^~~
chip/stm32_adc.c: In function 'adc_shutdown':
chip/stm32_adc.c:1496:7: warning: unused variable 'ret' [-Wunused-variable]
1496 | int ret;
| ^~~
chip/stm32_i2c.c:729:12: warning: 'stm32_i2c_sem_wait_uninterruptble' defined but not used [-Wunused-function]
729 | static int stm32_i2c_sem_wait_uninterruptble(FAR struct i2c_master_s *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
wireless/lpwan/sx127x/sx127x.c:147:52: warning: missing terminating ' character
147 | # warning OOK support is not complete, RX+TX doesn't work yet!
| ^
str71_spi.c:435:24: warning: initialization of 'uint32_t (*)(struct spi_dev_s *, uint32_t)' {aka 'unsigned int (*)(struct spi_dev_s *, unsigned int)'} from incompatible pointer type
'uint16_t (*)(struct spi_dev_s *, uint16_t)' {aka 'short unsigned int (*)(struct spi_dev_s *, short unsigned int)'} [-Wincompatible-pointer-types]
435 | .send = spi_send,
| ^~~~~~~~
str71_spi.c:435:24: note: (near initialization for 'g_spiops.send')
chip/pic32mx-lowconsole.c:147:24: warning: 'pic32mx_getreg' defined but not used [-Wunused-function]
static inline uint32_t pic32mx_getreg(uintptr_t uart_base,
^
chip/pic32mx-gpio.c:113:20: warning: 'pic32mx_value' defined but not used [-Wunused-function]
static inline bool pic32mx_value(uint16_t pinset)
^
chip/pic32mz-gpio.c:124:20: warning: 'pic32mz_value' defined but not used [-Wunused-function]
static inline bool pic32mz_value(pinset_t pinset)
^
chip/pic32mx-usbdev.c:3065:1: warning: 'pic32mx_epreserved' defined but not used [-Wunused-function]
pic32mx_epreserved(struct pic32mx_usbdev_s *priv, int epno)
^
mmcsd/mmcsd_spi.c: In function 'mmcsd_mediachanged':
mmcsd/mmcsd_spi.c:1938:7: warning: 'return' with a value, in function returning void
return ret;
^
In file included from partition/fs_partition.c:42:0:
partition/partition.h:66:19: warning: 'read_partition_block' defined but not used [-Wunused-function]
static inline int read_partition_block(FAR struct partition_state_s *state,
^
local/local_netpoll.c: In function 'local_pollsetup':
local/local_netpoll.c:305:1: warning: label 'pollerr' defined but not used [-Wunused-label]
pollerr:
^~~~~~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: If3ea8f32b878aa218072130f7c3018f0d3c1aca5
arp/arp_notify.c:132:43: warning: for loop has empty body [-Wempty-body]
prev = curr, curr = curr->nt_flink);
^
sixlowpan/sixlowpan_tcpsend.c:806:31: warning: implicit conversion from 'unsigned int' to 'uint16_t' (aka 'unsigned short') changes value from 4294967295 to 65535 [-Wconstant-conversion]
_SO_TIMEOUT(psock->s_sndtimeo));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Numerous warnings like:
ieee802154_getreq.c:93:3: warning: implicit declaration of function 'memcpy' is invalid in C99 [-Wimplicit-function-declaration]
IEEE802154_EADDRCOPY(eaddr, req.attrval.mac.eaddr);
^
nxfonts/nxfonts_cache.c:839:35: warning: for loop has empty body [-Wempty-body]
fcache = fcache->flink);
bluetooth/bluetooth_finddev.c💯11: warning: implicit declaration of function 'memcmp' is invalid in C99 [-Wimplicit-function-declaration]
if (BLUETOOTH_ADDRCMP(dev->d_mac.radio.nv_addr, match->bf_addr))
^
rwbuffer.c:559:7: warning: variable 'ret' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
if (rwb->rhmaxblocks > 0 && rwb->rhnblocks > 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Run all files modified by PR 766 through nxstyle and fix any resulting complaints.
NOTE: Numerous "Mixed case identifier" errors in arch/arm/src/cxd56xx/cxd56_gnss.c were not fixed because this problem is of much larger scope than this file.
This commit resolves issue #620:
Remove CONFIG_CAN_PASS_STRUCTS #620
The configuration option CONFIG_CAN_PASS_STRUCTS was added many years ago to support an old version of the SDCC compiler. That compiler is currently used only with the Z80 and Z180 targets. The limitation of that old compiler was that it could not pass structures or unions as either inputs or outputs. For example:
#ifdef CONFIG_CAN_PASS_STRUCTS
struct mallinfo mallinfo(void);
#else
int mallinfo(FAR struct mallinfo *info);
#endif
And even leads to violation of a few POSIX interfaces like:
#ifdef CONFIG_CAN_PASS_STRUCTS
int sigqueue(int pid, int signo, union sigval value);
#else
int sigqueue(int pid, int signo, FAR void *sival_ptr);
#endif
This breaks the 1st INVIOLABLES rule:
Strict POSIX compliance
-----------------------
o Strict conformance to the portable standard OS interface as defined at
OpenGroup.org.
o A deeply embedded system requires some special support. Special
support must be minimized.
o The portable interface must never be compromised only for the sake of
expediency.
o Expediency or even improved performance are not justifications for
violation of the strict POSIX interface
Also, it appears that the current SDCC compilers have resolve this issue and so, perhaps, this is no longer a problem: z88dk/z88dk#1132
NOTE: This commit cannot pass the PR checks because it depends on matching changes to the apps/ directory.
Resolution of Issue 619 will require multiple steps, this part of the first step in that resolution: Every call to nxsem_wait_uninterruptible() must handle the return value from nxsem_wait_uninterruptible properly. This commit is only for those files under fs/driver, fs/aio, fs/nfs, crypto/, and boards/.
Please note: The modified file under fs/nfs generates several " Mixed case identifier found" errors. Please ignore these. These cannot be fixed without changes to numerous other files. They also follow a non-standard convention that is used many files: Using lower case structure names in custom SIZEOF_ definitions.
Resolution of Issue 619 will require multiple steps, this part of the first step in that resolution: Every call to nxsem_wait_uninterruptible() must handle the return value from nxsem_wait_uninterruptible properly. This commit is only for those files under fs/inode. Utility functions under fs/incode were modified so the changes do extend to other fs/ sub-directories as well.
Resolution of Issue 619 will require multiple steps, this part of the first step in that resolution: Every call to nxsem_wait_uninterruptible() must handle the return value from nxsem_wait_uninterruptible properly. This commit is only for those files under fs/tmpfs and fs/spiffs. Still do do: The rest of fs/ and all of drivers/ and arch/.
This reverts commit b9ace36fcc.
This change was added by PR 625 but has a serious logic flaw. It removes all occurrences of INCDIROPT and replaces it with a definition in tools/Config.mk:
else ifeq ($(WINTOOL),y)
DEFINE = "$(TOPDIR)/tools/define.sh"
INCDIR = "$(TOPDIR)/tools/incdir.sh" -w
This logic flaw is the Config.mk is included in all Make.defs files BEFORE WINTOOL is defined. As a result, the definition is wrong in many places when building under Cygwin with a Windows native toolchain.
