sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
6,351 Commits 1 Branch 0 Tags 291 MiB
b01900d7e6
Commit Graph

887 Commits

Author SHA1 Message Date
Gregory Nutt
fbd5ab0758 Beginning of support for USB host side tracing 2013-09-09 14:01:52 -06:00
Gregory Nutt
a992004b0e USB MSC host class driver: Don't bother retrying to initialize the FLASH if the interface is returning fatal transfer errors 2013-09-09 10:00:16 -06:00
Gregory Nutt
40f84dfa19 Trivial updates assocaited with USB host mass storage and SAMA5 EHCI 2013-09-08 13:42:56 -06:00
Gregory Nutt
9a9de5de81 Fix warnings in USB MSC when compiled for a high speed device; also fix USB MSC default VID/PID configuration 2013-09-07 10:12:02 -06:00
Gregory Nutt
0585cd5692 Extend USB trace logic. When we are configured to decode and stringify trace data, de-stringification support is not included for class driver trace output 2013-09-06 17:24:02 -06:00
Gregory Nutt
b95886626e Back-port some bugfixes from the ENCX24J600 to the ENC28J60 driver (unverified). From Max Holtzberg 2013-09-06 13:17:12 -06:00
Gregory Nutt
8912bcb1ea SAMA5D3x-EK: Add support for USB MSC device on AT25 serial flash 2013-09-06 13:07:29 -06:00
Gregory Nutt
fb37248343 CDC/ACM and PL2303 device drivers: Don't use the max packet size assigned to an endpoint in order to determine the request buffer size. The endpoint has not yet been configured that max packet size may be wrong. 2013-09-05 18:00:16 -06:00
Gregory Nutt
ce6368793a Some restructing of the CC3000 build 2013-09-04 16:40:57 -06:00
Gregory Nutt
64f1c78367 CC3000 driver updates from Alan Carvalho de Assis 2013-09-04 09:45:59 -06:00
Gregory Nutt
29d4748b1b Initial cut of a driver for the TI CC3000 network module with support on the Freescale KL25Z board from Alan Carvalho de Assis 2013-09-03 14:59:48 -06:00
Gregory Nutt
c162cca9e8 SAMA5 UDPHS: Some very early debug corrections. Not yet working. 2013-09-02 12:26:15 -06:00
Gregory Nutt
67a126a5dc Misc USB device changes reated to SAMA5, trace support, and USB monitoring 2013-09-01 11:52:21 -06:00
Gregory Nutt
ac130dc2f3 CDC/ACM Device: Fixe compilation errors when dual speed support is enabled 2013-09-01 11:27:59 -06:00
Gregory Nutt
a3af5b3aaf SAMA5 OHCI+EHCI: Using cp15_clean instead of cp15_coherent; EHCI: Need to set alt pointer in order to handle short transfers. 2013-08-27 13:07:21 -06:00
Gregory Nutt
bc46b447dc Fix all occurrences of "the the" in documentation and comments 2013-08-27 09:40:19 -06:00
Gregory Nutt
12beaf4b1a Add a new method to the USB host driver interface: getdevinfo. This method will return information about the currently connected device. At present, it only returns the device speed. The speed is needed by the enumeration logic in order to set a credible initial EP0 max packet size 2013-08-26 15:46:16 -06:00
Gregory Nutt
463c40c42e ENCX24J600: Use the ENC's SRAM from multiple TX packets. From Max Holtzberg 2013-08-26 09:11:58 -06:00
Gregory Nutt
70be601ea2 Add ENCX24J600 Ethernet driver and support for the ENCX24J600 with the Olimex STM32 P107 board. From Max Holtberg 2013-08-25 11:21:54 -06:00
Gregory Nutt
e5208a6e92 ENC28J60 errors reported by Max Holtzberg 2013-08-21 08:10:32 -06:00
Gregory Nutt
19d7c90d4e USB host: Add device address management support in preparation for USB hub support 2013-08-18 14:31:57 -06:00
Gregory Nutt
a65ac5bc72 Back out most of the changes of 3b04d08043742b9e65cf38d45988b35bff91daed 2013-08-13 14:12:27 -06:00
Gregory Nutt
b575450a04 Separate SAMA5 OHCI interrupt handling into separate functions 2013-08-13 13:34:35 -06:00
Gregory Nutt
120a3604c9 More changes to USB host interface to support multiple downstream ports 2013-08-12 16:29:33 -06:00
Gregory Nutt
ed49812d2c Add untested OHCI driver for the SAMA5; structure naming and header files for USB host initialization prototypes 2013-08-11 17:11:32 -06:00
Gregory Nutt
dd3c682443 SAMA5: Some improvements to the HSCMI card removal/insertion logic 2013-08-11 11:13:11 -06:00
Gregory Nutt
0f20d4581b Added FIONREAD and FIONWRITE to CDC/ACM driver. From Lorenz Meier 2013-08-10 19:21:39 -06:00
Gregory Nutt
82b528e0c8 Serial FIONREAD, FIONWRITE, and TERMIOS I/O processing from Mike Smith, Andrew Tridgell, and and Lorenz Meier 2013-08-10 19:14:05 -06:00
Gregory Nutt
97e13b33ab MMC/SD SDIO: Correct return values when multiple block transfers are suppressed. From Andrew Tridgell via Lorenz Meier 2013-08-10 18:29:22 -06:00
Gregory Nutt
da4cebf572 SAMA5: Fix HSMCI race condition. Now memory card interface is functional with DMA 2013-08-10 18:01:23 -06:00
Gregory Nutt
968b2553cd Rearrange configuration settings so that ARCH_HAVE_SDIO is moved to higher, sharable level 2013-08-10 09:06:53 -06:00
Gregory Nutt
628f50ba61 SAM3,4,A5 DMA fixes; SAMA5 SPI driver now supports DMA transfers 2013-08-09 13:12:16 -06:00
Gregory Nutt
ce9eb71495 SAMA5: A few early, easy bug fixes. The rest will all be difficult 2013-08-06 11:29:53 -06:00
Gregory Nutt
cbe8c5ed56 SAMA5: Add logic to auto-mount a file system on AT25 SPI FLASH for NSH 2013-08-05 08:24:39 -06:00
Gregory Nutt
906506c61c SAMA5D3x-EK: At support for the AT25 serial FLASH 2013-08-04 16:56:41 -06:00
Gregory Nutt
77e1c27005 Update SAMA5D3x-EK board configuration to support on-board UART connections, LEDs, and push buttons 2013-07-24 12:27:12 -06:00
Gregory Nutt
c6b141d190 Fix typoes in drivers/rwbuffer.c from Chia Cheng Tsao 2013-07-09 07:59:28 -06:00
Gregory Nutt
37ed44a1ee Fix type in the USB composite device driver 2013-07-04 07:47:32 -06:00
Gregory Nutt
0ff5a0c791 Correct port direction for Arduino MISO signal 2013-07-02 12:37:20 -06:00
Gregory Nutt
cfb156f286 Add support for touchscreen on ITEAD Arduino shield. Untested 2013-07-02 08:25:53 -06:00
Gregory Nutt
bdf96a93db Revise how delays are calculated in SPI bit bang driver so that we may get a little better frequency resolution 2013-07-01 20:55:36 -06:00
Gregory Nutt
652c33a53a clean up of SPI bit bang logic 2013-07-01 17:49:43 -06:00
Gregory Nutt
e1dab23711 Add a general bit-bang SPI lower-half driver and implement the bit-bang driver for the Arduino ITEAD TFT shield 2013-07-01 16:50:16 -06:00
Gregory Nutt
8b68ea2f94 Add a general bit-bang SPI upper-half driver 2013-07-01 12:23:26 -06:00
Gregory Nutt
09faaccc02 Created new directories to hold SPI-related files 2013-07-01 08:11:54 -06:00
Gregory Nutt
3d975e0a08 Fix UG-2832HSWEG04 landscape. Add reverse landscape support to UG_2864AMBAG01 and UG-9964HSWAG01. Fixe NXHELLO default colors for 1-bit mono modes 2013-06-24 12:37:02 -06:00
Gregory Nutt
d971650440 Fix UG-2832HSWEG04 configuration values 2013-06-23 15:17:22 -06:00
Gregory Nutt
d11050e978 Add support for the UG-2843HHSWEG04 OLED and for the SAM4L Xplained Pro OLED module that uses that OLED. 2013-06-23 14:39:56 -06:00
Gregory Nutt
a60e38e13a Fix error in MMC/SD SPI driver introduced with some recent changes; Update TODO list 2013-06-23 10:45:37 -06:00
Gregory Nutt
b41c96e1f8 Beginning debug of SAM4L Xplained SLCD 2013-06-22 17:01:44 -06:00
Gregory Nutt
d7ec0089a7 Fix for ENC28J60 from Dave 2013-06-22 08:55:16 -06:00
Gregory Nutt
161af4bf33 MMC/SD SPI speed field is only used if CONFIG_SPI_OWNBUS is not defined 2013-06-17 18:27:25 -06:00
Gregory Nutt
b9ad057972 MMC/SD driver needs to manage SPI mode and data width as well 2013-06-17 12:31:24 -06:00
Gregory Nutt
c9f1d1857c SAM3U-EK: Correct polarity of the PENIRQ signal 2013-06-16 14:31:18 -06:00
Gregory Nutt
c7fd7a4e27 Re-architected SAM3/4 SPI interface; Change BUSY bit handling in the ADS7843E driver 2013-06-16 10:09:21 -06:00
Gregory Nutt
dd2983e26a SAM MMCSD/SPI related changes 2013-06-15 17:00:52 -06:00
Gregory Nutt
9cf942bcb2 SAM3/4: Loop counter for PLL delay must be volatile or it may get optimized away 2013-06-13 16:18:25 -06:00
Gregory Nutt
83ecc03d17 Remove CONFIG_XYZ_BUILTIN configurations, replace with the single CONFIG_NSH_BUILTIN_APPS. Add SAM3/4 sam_periphclks.h which is just a header file that includes the right header file. Misc SAM3U-EK cleanup 2013-06-12 17:32:00 -06:00
Gregory Nutt
3edec35c51 Add flow control support to the STM32 serial driver; Fix some issues with UART2 and 5. From Lorenz Meier and Mike Smith 2013-06-06 14:49:14 -06:00
Gregory Nutt
0e37ec1bfc Add NSRF42L01 driver. From Laurent Latil 2013-06-01 08:03:55 -06:00
Gregory Nutt
4748599a43 .dSYM only needs to be in the same .gitignore files as .exe 2013-05-30 15:02:04 -06:00
Gregory Nutt
7554d2888e Upate .gitignore files. Add .dSYM. Make sure / is present where needed. Add some missing .gitignore files 2013-05-30 14:45:31 -06:00
Gregory Nutt
47bbf54f11 Optimize request buffer sizes in the serial USB drivers so that we avoid so many NULL packets and so that the OUT request buffer size is exactly the max packet size. 2013-05-29 12:30:37 -06:00
Gregory Nutt
6d3a292f02 Fix null packet handling in the PIC32 USB device driver. This is a critical bug fix for PIC32. Add support for the USB monitor to the Sure-PIC32MX configuration 2013-05-28 13:36:01 -06:00
Gregory Nutt
f2cb0540a5 Verified the sure-pic32mx/usbnsh configuration 2013-05-27 14:10:34 -06:00
Gregory Nutt
b97a816998 The SLCD driver is now fully functional for Sure PIC32MX board 2013-05-27 11:39:13 -06:00
Gregory Nutt
157789e373 Rename SLCD geometry tructure to attributes; Move MAX contrast to attributes. Add attribute and ioctl commands to get and set SLCD brightness 2013-05-27 07:26:59 -06:00
Gregory Nutt
a3c1949963 Converted configs/pcblogic-pic32mx configurations to use kconfig-frontends. Re-organization of files in configs/pcblogic-pic32mx/src 2013-05-25 11:53:49 -06:00
Gregory Nutt
afa905fc15 Audio subystem update from Ken Pettit. Plus moved some header files 2013-05-21 13:13:05 -06:00
Gregory Nutt
5b86207177 Add audio/ sub-syste, include/nuttx/audio.h interface, and drivers/audio/vs1053.c driver to NuttX. From Ken Pettit 2013-05-19 15:12:28 -06:00
Gregory Nutt
b80707ea78 Add support for R61505U LCD controller on HY-mini STM32v board 2013-05-16 14:06:16 -06:00
Gregory Nutt
88c0911fb1 Various changes and bigfixes for problems detected by CppCheck 2013-05-09 14:23:34 -06:00
Gregory Nutt
84b2c77a63 configs/mikroe-stm32f4: Add new configurations plus support for the MIO283QT2 display from Ken Pettit 2013-05-07 14:34:09 -06:00
Gregory Nutt
337680e346 mio283qt2.c: Need select/deselect LCD in setpower method; hwinitialize did not deselect LCD 2013-05-06 08:34:53 -06:00
Gregory Nutt
345c592258 Fixed to M25P driver from Ken Pettit plus some documentation updates 2013-05-03 17:17:14 -06:00
Gregory Nutt
8757465df2 Replace CONFIG_MTD_SMART in MTD drivers with other conditions 2013-05-03 14:32:08 -06:00
Gregory Nutt
72179b7773 Rearchitecting of some MTD, partition, SMART interfaces, and FLASH drivers to: Better use the byte write capbility when available and to use smaller erase sectors for the erase sector size when available). 2013-05-03 12:52:33 -06:00
Gregory Nutt
4f15d37b62 Add support for the byte write method to MTD partition logic; Beef up the MTD partition test -- and fix resulting bugs detected 2013-05-02 08:07:42 -06:00
Gregory Nutt
9ead6cadff Fix typo in configuration variables: MP25P should M25P 2013-05-01 12:04:39 -06:00
Gregory Nutt
1099eabe3d Cosmetic update to comments 2013-05-01 11:42:36 -06:00
Gregory Nutt
99c2cfc168 Add an optional byte-oriented write method to the MTD interface 2013-05-01 10:59:57 -06:00
Gregory Nutt
ba52f8d3ec Misc changes for clean built od mikroe-stm32f4 configurations 2013-05-01 09:21:13 -06:00
Gregory Nutt
25d5706ca3 SMART block driver plus changes to M25P and RAM drivers needed for SMART support 2013-04-30 19:10:54 -06:00
Gregory Nutt
5d4af79ea0 Incorporate comments from Ken Petit 2013-04-30 17:02:34 -06:00
Gregory Nutt
f9be47ead2 Add configuration and example to test MTD partitions 2013-04-30 15:54:02 -06:00
Gregory Nutt
4d4ece78af Add MTD partition support plus fix some typos in comments 2013-04-30 12:37:34 -06:00
Gregory Nutt
420ca1b256 configs/freedom-kl25z: Change references to NuTiny to Freedom KL25Z 2013-04-25 20:09:15 -06:00
Gregory Nutt
b630e6a153 Useless TIOCSERGSTRUCT logic in most serial drivers is not compiled unless CONFIG_DEBUG and CONFIG_SERIAL_TIOCSERGSTRUCT are defined 2013-04-25 15:52:48 -06:00
Gregory Nutt
f9b9875952 Various Kconfig files still have references to CONFIG_ variables. Some in harmless comments, some in config definionts which is not harmless. All removed 2013-04-25 15:52:00 -06:00
Gregory Nutt
37da13321c kconfig2html: Perform HTL conversions and add hyperlinks for dependency expressions 2013-04-21 11:01:46 -06:00
Gregory Nutt
3f52b0fbb6 Yet more kconfg2html logic 2013-04-20 17:29:10 -06:00
Gregory Nutt
fc4c714523 Add support for the FM25V01 part 2013-04-18 16:12:37 -06:00
Gregory Nutt
3e6b7a33f2 Fix some naming and comments associated with the Open1788 touchscreen 2013-04-15 11:25:08 -06:00
Gregory Nutt
ad2ebf1dd8 Convert olimex-lpc17stk configuration to use the kconfig-frontends tools; Fix some compile errors in the pl2303 USB device driver 2013-04-12 08:38:52 -06:00
Gregory Nutt
b841dac0be Minor clean-up while debugging the Open1788 touchscreen 2013-04-12 08:37:20 -06:00
Gregory Nutt
db78b76102 Mostly updates and corrections to .gitignore files 2013-04-04 15:39:50 -06:00
Gregory Nutt
23db0682b7 Clone svn:ignore directory atributed to .gitignore files 2013-04-04 14:27:29 -06:00
patacongo
e1daee1930 Several fixes for LPC1788 GPIO 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5813 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-03 19:35:21 +00:00
patacongo
e1e8f4debe SSP driver fixes for the LPC178x; Fixes for Open1788 touchscreen driver 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5812 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-02 16:36:19 +00:00
patacongo
0bfa1b75e2 Add support for STM32 F427/437 chips. From Mike Smith 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5807 42af7a65-404d-4744-a932-0658087f49c3
 2013-04-01 13:43:31 +00:00