sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
11,368 Commits 1 Branch 0 Tags 291 MiB
b068185811
Commit Graph

3867 Commits

Author SHA1 Message Date
Gregory Nutt
c9d7cfae82 SAM PIO: sam_pio.h needs to include chip/sam_memorymap.h in order to resolve some conditional logic properly 2015-05-01 13:41:28 -06:00
Gregory Nutt
afcd13e634 SAMA5 OHCI: Improve some trace-related naming 2015-05-01 13:40:54 -06:00
Gregory Nutt
a25d7da798 Add USB host trace output to show EP0 configuration 2015-05-01 13:02:20 -06:00
Gregory Nutt
6d526c189d SAMA5 OHCI: Clean up some debug output 2015-05-01 10:50:01 -06:00
Gregory Nutt
d506f9d0aa SAMA5D OHCI: Add some missing logic required for USB hub support 2015-05-01 10:13:23 -06:00
Gregory Nutt
63dce70d2b Added missing EXTI definitions for the STM32 F3; Correct an error the port D base address in the STM32 F3 and F37 memory maps. From Greg Meiste. 2015-05-01 07:31:56 -06:00
Gregory Nutt
79029ebe2d EFM32 USB host: Add missing trace data and some missing connection-related logic; update a configuration 2015-04-30 13:46:53 -06:00
Gregory Nutt
20b818ef1a STM32/EFM32 USB host: Implemented asynchronous cancel method 2015-04-30 11:24:18 -06:00
Gregory Nutt
2e27ff4d9e USB Hub: Fix compile problems when hub debug enabled 2015-04-30 08:12:55 -06:00
Gregory Nutt
dfa4a1f7ac STM32 HUB: Fix more compilation errors when hub support is enabled 2015-04-30 08:00:41 -06:00
Gregory Nutt
e34ca32852 Fix some errors in initial re-verification of USB host on the STM32F4-Discovery 2015-04-30 07:28:30 -06:00
Gregory Nutt
52cbeead7f First cut, dirty conversion of EFM32, STM32 FS and HS host drivers to the new interfaces 2015-04-29 15:53:58 -06:00
Gregory Nutt
b909ad04d8 USB HUB: Fix a deadlock that can occur if the HCD and the HUB try to share the high priority work queue. Now how work must be done on the low priority work queue. 2015-04-29 08:32:17 -06:00
Gregory Nutt
086bb52a37 Merge remote-tracking branch 'origin/master' into usbhub 2015-04-28 12:22:20 -06:00
Gregory Nutt
5b80b257ce USB ECHI: Fix a bug when trying to traverse an empty asynchronous queue 2015-04-28 11:29:16 -06:00
Gregory Nutt
5c76c53909 EHCI HUB: Fix some issues related to speed and device addresses 2015-04-28 09:43:06 -06:00
Gregory Nutt
398c7757e3 STM32 PVD: Adds support for STM32's Programmable Voltage Detector feature. I put register access behind CONFIG_STM32_ENERGYLITE as have not checked F1/F2/F4 etc. manuals. Tested on STM32L1. PVD interrupt looks generic, at least #defines it needs are in headers for every chip variant. By Dmitry Nikolaev, submitted by Juha Niskanen. 2015-04-28 06:37:59 -06:00
Gregory Nutt
186b58a1a5 EHCI: Duplicated lines of code trashing error value 2015-04-27 15:39:57 -06:00
Gregory Nutt
9372a954ee LPC31 EHCI: Fix some assertions 2015-04-27 14:43:53 -06:00
Gregory Nutt
91b8b92567 Merge remote-tracking branch 'origin/master' into usbhub 2015-04-27 14:12:46 -06:00
Gregory Nutt
55ac01399b Correct some cloned typos involving EHCI 2015-04-27 14:03:24 -06:00
Gregory Nutt
24761dea0b EHCI: Fix some compilation errors when USB DEBUG is enabled 2015-04-27 12:27:17 -06:00
Gregory Nutt
7313906ec5 EHCI: Can asynch cancellation method 2015-04-27 11:18:31 -06:00
Gregory Nutt
b74e3b3903 USB EHCI: Implement the async() method 2015-04-27 09:00:00 -06:00
Gregory Nutt
30ff783af0 ECHI HCDs: Separate logic used in synchronous transfers so that it can be used in forthcoming asynchronous transfer 2015-04-27 07:38:20 -06:00
Gregory Nutt
8f5b62add6 Last change was still in editor on last commit 2015-04-26 12:21:01 -06:00
Gregory Nutt
eabbb6ede1 Port hub support to LPC31 from SAMA5; Updated Olimex-LPC-H3131 for hub support and refresh configurations 2015-04-26 12:18:08 -06:00
Gregory Nutt
397f31f061 Another hub-related interface change: Need to pass speed to EP0 2015-04-26 09:53:43 -06:00
Gregory Nutt
af6919cd76 LPC17 OHCI: Fix an error in ED list removal 2015-04-25 14:52:01 -06:00
Gregory Nutt
e46cb394f9 Fixes some crashes when the hub is removed and/or reinserted 2015-04-25 12:16:22 -06:00
Gregory Nutt
e7792435c7 Add missing logic to destroy a class when the device is no longer connected to the hub port 2015-04-25 11:17:37 -06:00
Gregory Nutt
0ce4330433 USB OHCI: Need to preserve the speed bit when reconfiguring ep0 2015-04-25 07:48:20 -06:00
Gregory Nutt
7793523dd8 Copy some control port framework from LPC17 to SAMA5 OHCI; Copy some speed handling from SAMA5 OHCI to LPC17 2015-04-25 06:46:44 -06:00
Gregory Nutt
ed5287855f LPC17 USB host: Direction bit being set wrong from allocated control endpoints 2015-04-24 19:46:00 -06:00
Gregory Nutt
becfe4ef9d HUB class must cancel any pending interrupt IN transfers before destroying the endpoint 2015-04-24 12:18:25 -06:00
Gregory Nutt
7d7ab442e1 If asynchronous tranfers are supported, then there must also be a mechanism to cancel the pending transfer 2015-04-24 11:23:52 -06:00
Gregory Nutt
2768f13153 USB hub: Fixes for some port status change handling 2015-04-24 09:57:59 -06:00
Gregory Nutt
d11af85ddf Merge remote-tracking branch 'origin/master' into usbhub 2015-04-23 14:06:18 -06:00
Gregory Nutt
0092f79696 Two r's and only two r's in the word interrupt 2015-04-23 14:04:43 -06:00
Gregory Nutt
ab17603ceb Fix USB hub bugs: Don't allocate port EP0 until needed, otherwise run out of endpoints; using wrong pointer to access child endpoint array in a few places 2015-04-23 09:42:58 -06:00
Gregory Nutt
215dad9984 Fix USB host polling; fix a typo in LPC17 HCD 2015-04-23 07:13:31 -06:00
Gregory Nutt
be2ed7eba7 Merge in from Master 2015-04-23 06:34:49 -06:00
Gregory Nutt
64496a635c USB hub: Add some hub-related configuration settings 2015-04-22 17:16:35 -06:00
Gregory Nutt
9c61847203 USB Hub: Initial implementation asynchronous pipe I/O in the LPC17 HCD needed for hub support 2015-04-22 15:03:25 -06:00
Gregory Nutt
f7ec9b0831 USB hub: Change to connection interface so that applications can deal with external hubs 2015-04-22 12:28:19 -06:00
Gregory Nutt
85df251093 STM32 RTC counter: Include enable/disable backup domain within critical section. Per recommendtion of Alexander Oryshchenko. 2015-04-21 18:08:31 -06:00
Gregory Nutt
8e9fd9b838 USB HCDs: Add hooks for the async method 2015-04-21 15:43:12 -06:00
Gregory Nutt
2afe696012 LPC17 USB HCD: Adapted to new interface 2015-04-21 13:11:32 -06:00
Gregory Nutt
fde0bf650e USB host: Integrate logic to assign device function address 2015-04-21 12:17:49 -06:00
Gregory Nutt
ef813e2c72 SAMA5 EHCI: Fix some compile errors when debug is enabled 2015-04-21 09:28:42 -06:00
Gregory Nutt
eedce63bd6 SAMA5 EHCI: Remove unused variable from structure 2015-04-21 09:18:31 -06:00
Gregory Nutt
db3b235fe6 SAMA5 OHCI and EHCI: Now conform to new interfaces to support hubs 2015-04-21 08:59:30 -06:00
Gregory Nutt
320d678d89 STM32 F1 RT Counter: Another fix from Darcy Gong 2015-04-19 07:05:39 -06:00
Gregory Nutt
10eeff30e7 STM32 F1 RTC Counter: Now need to enable backup domain write access when setting the time. From Darcy Gong 2015-04-19 06:58:07 -06:00
Gregory Nutt
244a30b6a9 Fix an error introduced into stm32_pwr_enablebkp(). That function must preserve the previous state of backup domain access on return. 2015-04-18 07:31:20 -06:00
Gregory Nutt
c54adf248a STM32 - cosmetic changes to indentation 2015-04-16 16:35:06 -06:00
Gregory Nutt
a08aabe102 STM32 DMA2D: Use helper function when freeing layers. From Marco Krahl 2015-04-16 11:16:14 -06:00
Gregory Nutt
eb28a666b4 Add support for the new DMA2D features to the STM32F429i-Disco LTDC configuration. From Marco Krahl. 2015-04-16 09:11:53 -06:00
Gregory Nutt
8ed4b1acfa Defines a second interface for the dma2d controller. Controlling both LTDC and DMA2D was unpractical from the programmers view because both controllers are to different. LTDC only controls the display visibility but the DMA2D controller changes the content of the frame buffer (buffer of the layer). 
The main features are:

1. DMA2D interface
   Supports the nuttx pixel formats:
   - FB_FMT_RGB8
   - FB_FMT_RGB24
   - FB_FMT_RGB16_565
   Dynamic layer allocation during runtime for the supported formats
   - The number of allocatable layer can be configured.
   Supported dma2d operation:
   - blit (Copy content from source to destination layer) also works with
     selectable area.
   - blend (Blend two layer and copy the result to a destination layer wich can
     be a third layer or one of the source layer) also works with selectable
     area.
   - fillarea (Fill a defined area of the whole layer with a specific color)

As a result of that the dma2d controller can't transfer data from the core coupled memory, CCM is disabled but usable by the ccm allocator. Currently the ccm allocator is used for allocating the layer structurei only. For the dma memory (layers frame buffer) memory is allocated from heap 2 and 3.

2. LTDC interface

   I have changed the api for the currently non implemented operations:
   - blit (Copy content from a dma2d layer to an ltdc layer) also works with
     selectable area.
   - blend (Blend two dma2d layer and copy the result to a destination ltdc
     layer) also  works with selectable area.

     Note! ltdc layer is a layer referenced by the ltdc interface. dma2d layer
     is a layer referenced by the dma2d interface.

     One of the most important questions for me was, How can i flexible use an
     ltdc layer with the dma2d interface, e.g. as source layer for dma2d
     operations?
     Get the layer id of the related dma2d layer by a special flag when using
     getlid() function of the ltdc interface and use the layer id to reference
     the specific dma2d layer by the dma2d interface.

     The ltdc coupled dma2d layers are predefined and can't be dynamically
     allocated of freed. They use the same frame buffer memory and the same
     color lookup table.

   Changes:
   - layer internal format of the clut table
   - interrupt handling for register reload (vertical vblank) instead using
     waiting loop
   - small fixes and refactoring

From Marco Krahl.
 2015-04-16 09:11:52 -06:00
Gregory Nutt
1f193dd515 Calypso/Compal_e86 update from Craig Comstock 2015-04-16 09:11:47 -06:00
Gregory Nutt
69b7d3abd3 More places where watchodg mispelled 2015-04-15 21:36:30 -06:00
Gregory Nutt
e6c302bdba STM32 IWDG typo fix. from chenming582892 2015-04-15 20:13:56 -06:00
Gregory Nutt
811dc14c33 Update comments 2015-04-15 16:38:08 -06:00
Gregory Nutt
ded44679e9 Add option to enable stackcheck per architecture 2015-04-12 06:30:24 -06:00
Gregory Nutt
068fc43170 Revert commit b80e8be652dfa52e97daa65aa3e550cf31cb2409 2015-04-12 06:26:50 -06:00
Gregory Nutt
63c0de86fe Remove all traces of CONFIG_ARMV7M_STACKCHECK 2015-04-11 10:01:44 -06:00
Gregory Nutt
2a9cc61223 STM32 changes from David Sidrane 2015-04-11 07:19:20 -06:00
Gregory Nutt
eed7cc66ad STM32 CAN: More places where FR instead FIR used 2015-04-09 19:30:19 -06:00
Gregory Nutt
3840c2a14b Fix several typos in comments 2015-04-09 16:13:03 -06:00
Gregory Nutt
c49f7a8e87 Missing i found by David Sidrane 2015-04-09 15:16:05 -06:00
Gregory Nutt
2aa80e06f5 Remove executable flag from more .c and .h files 2015-04-09 08:20:57 -06:00
Gregory Nutt
2c53894065 Cosmetic 2015-04-09 07:59:31 -06:00
Gregory Nutt
e113be1bff SAMA5 Serial: Reading IMR and disabling interrupt must be atomic 2015-04-08 15:27:31 -06:00
Gregory Nutt
2a9bd3ad73 SAM3/4 and SAMV7 UART: The IMR register is read-only. This means that sam_restoreints() does not actually re-enable UART interrupts. 2015-04-08 15:04:10 -06:00
Gregory Nutt
98b0659abf SAMA5 Serial: Fix a couple of errors backporting termios and flowcontrol 2015-04-08 14:35:04 -06:00
Gregory Nutt
662757c77a SAM3/4 and SAMV7 Serial: Serial interrupts left disabled. 
A side-effect of changing serial settings via TERMIOS (such as tcsetattr) is that serial interrupts were being left disabled.  This is not a problem if the serial configuration is changed when there are no open references to the serial device.  In that case, serial interrupts are disabled and will not be enabled enabled until the serial device is first opened.  But it is fatal if the serial device is already opened and if there is a task waiting to receive data.  In that case, the side-effect of disabling interrupts is fatal:  That task is then left hanging with interrupts disabled.
 2015-04-08 14:14:01 -06:00
Gregory Nutt
0a635653c2 SAMA5D Serial: Backup support for flowcontrol and termios from SAM3/4 -- UNVERIFIED 2015-04-08 14:13:08 -06:00
Gregory Nutt
16814e2b00 Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
Gregory Nutt
190c9adef0 Implements CONFIG_TIME_EXTENDED as we discussed relative to providing the last 3 members of the tm struct and support for filling them in and even using the wday in the STM32 RTC. From David Sidrane. 2015-04-08 06:56:43 -06:00
Gregory Nutt
0bebd62bc0 STM32: Another fix to RTC magic register from David Sidrane 2015-04-06 17:21:53 -06:00
Gregory Nutt
c12c253cc6 Add conditional logic so that people who use F1 don't have to be bother with meaningless RTC MAGIC settings 2015-04-06 16:35:56 -06:00
Gregory Nutt
4d5cb13c9d STM32 RTCC: Make back-up register and magic value used by RTCC configurable. From David Sidrane 2015-04-06 16:26:59 -06:00
Gregory Nutt
6058d3dc73 Typo fixes from David Sidrane 2015-04-06 15:27:37 -06:00
Gregory Nutt
65d9d18159 Minor changes to SAMV7 USB register definition file from review 2015-04-06 13:00:48 -06:00
Gregory Nutt
0c40f93c42 SAMV7 USB device: Finish option to force full speed mdoe 2015-04-06 10:07:12 -06:00
Gregory Nutt
9487f4628f Calypso: SPI built only if CONFIG_SPI 2015-04-05 13:26:25 -06:00
Gregory Nutt
fca4c51420 Update comments and README 2015-04-05 07:22:46 -06:00
Gregory Nutt
cf4bbae526 SAMV7: Fix SDRAM initialization instabiilties by changing the order of initialization 2015-04-04 19:58:31 -06:00
Gregory Nutt
c1886c6181 SAMV7: Apparently the data sheet is wrong, SDRAM clocking must be enabled at the PMC or the SDRAM does not work! The data sheet says that there is no clock control for SDRAMC 2015-04-04 19:04:29 -06:00
Gregory Nutt
8aeaff1e95 SAMV7: Fix a errort in GPIO bit encoding. Correct naming of a variable 2015-04-04 16:54:53 -06:00
Gregory Nutt
fda98ebeab SAMV7: Fix typo in some GPIO definitions 2015-04-04 14:04:58 -06:00
Gregory Nutt
0cf5088475 SAMV71-XULT ILI9488 LCD driver is code complete but untested 2015-04-03 16:36:58 -06:00
Gregory Nutt
b72cf3366c SAMV7: Add SMC register definition header file; SAMV71-Xult: Add an LCD driver. The initial commit is simply the SAVM4E-EK ILI9375 driver will bogus name changes to ILI9488. 2015-04-03 10:28:32 -06:00
Gregory Nutt
0ec67181c9 Move include/nuttx/timer.h, rtc.h and watchdog.h to include/nuttx/timers/. 2015-04-01 12:37:44 -06:00
Gregory Nutt
eb21ad0cf2 SAMV71-XULT: Add option to support connection of the maXTouch Xplained Pro on the 50-pin LCD connector 2015-03-31 09:01:38 -06:00
Gregory Nutt
8aa133029f SAMV7 Ethernet: Fix a write-past-end-of-buffer and trash-the-heap problem 2015-03-29 16:45:05 -06:00
Gregory Nutt
f1c79423e1 The STM32F4Discovery board doesn't come with a Low speed external oscillator so the default LSE source for the RTC doesn't work. 
In stm32_rtcc.c the up_rtcinitialize() logic doesn't work with the LSI. The check on RTC_MAGIC on the BK0R register lead to rtc_setup() call that rightfully enables the lsi clock; but the next times, when the rtc is already setup, the rtc_resume() call does NOT start the lsi clock!

The right place to put LSE/LSI initialisation is inside stm32_stdclockconfig() in stm32fxxxxx_rcc.c.  Doing this I checked the possible uses of the LSI and the LSE sources: the LSI can be used for RTC and/or the IWDG, while the LSE only for the RTC (and to output the MCO1 pin)..

This change is not verifed for any other platforms.

From Leo Aloe3132
 2015-03-29 15:34:48 -06:00
Gregory Nutt
dab3dbc75b Cortex-M7: Add support for enabled the D-Cache in write only mode. 
SAMV7 Ethernet:  I- and D-Cache are now enabled in the netnsh/ configuration.  D-Cache is enabled in write-though mode.  This mode is necessary because the DMA descriptors are each 8-bytes in size but the D-Cache cache line is 32-bits in size. So it is impossible make coherency for every 8-byte DMA descriptor without write-through.
 2015-03-29 14:42:03 -06:00
Gregory Nutt
4593fe3797 SAMV7/Cortex-M7: Add support for write through D-Cache. SAMV7 Ethernet look like it needs this 2015-03-29 13:09:22 -06:00
Gregory Nutt
a60fa12e86 Clean up pointer handling to make code more readability. This re-introduces the compiler optimization problem but this is the correct thing to do. I will have to drop back from -Os to -O2. 2015-03-28 14:46:35 -06:00
Gregory Nutt
d2fd139ebc SAMV7 EMAC: Fix alignment issue: RX buffers need to be invalidated. This means the alignment of buffers must be at least to the data cache line size at both ends of the buffer 2015-03-28 13:09:01 -06:00
Gregory Nutt
d7dbdfef58 SAMV7 EMAC: Sometimes TX is not started when TSTART is set??? Workaround seems to be to set it twice. Restored full optimization. Also CONFIG_NET_NOINTS is set so that interrupt level provessing is avoided 2015-03-28 09:42:45 -06:00
Gregory Nutt
79734c3c13 SAMV7 Ethernet: Fix some errors in circular queue handling 2015-03-27 13:04:43 -06:00
Gregory Nutt
72c923ff0b Fix another typo in the modified assertion logi 2015-03-27 13:02:46 -06:00
Gregory Nutt
ee506c42f5 Fix a typo in the last commit 2015-03-27 10:58:52 -06:00
Gregory Nutt
66670c1738 SAMV7 Ethernet+USB Updates 2015-03-27 10:47:03 -06:00
Gregory Nutt
459bf9e885 ARMv7-M: Add logic to dump all stack usage on a crash 2015-03-27 10:45:39 -06:00
Gregory Nutt
3c433f7f35 Updated comments/README 2015-03-26 12:33:03 -06:00
Gregory Nutt
6f4116add0 SAMV6 USB updates 2015-03-26 09:49:01 -06:00
Gregory Nutt
0ec1407add SAMV7 USB: Move clock initialization back to sam_clockconfig.c; add seperate UTMI register definition header file; fix a couple of typo bugs 2015-03-26 07:56:26 -06:00
Gregory Nutt
8bce3f19d8 SAMV7 USB: Replace 0 with something a little more informative 2015-03-25 18:59:59 -06:00
Gregory Nutt
3568dcd22f SAMV7 USB: Add some conditioned out test code 2015-03-25 18:45:04 -06:00
Gregory Nutt
8a9d5aa465 Add UTMI register definitions 2015-03-25 18:09:41 -06:00
Gregory Nutt
8b1475665c SAMV7 USB: More changes 2015-03-25 17:19:36 -06:00
Gregory Nutt
dd06cef845 SAMV7 USB: more updates 2015-03-25 15:56:10 -06:00
Gregory Nutt
2b3aee6940 SAMV7 USB DCD: A few more fixed from early intergration. Still does not work 2015-03-25 09:04:51 -06:00
Gregory Nutt
7e69535daf SAMV7 USB: More fixes at beginning of testing. Still a long way from working 2015-03-25 08:06:59 -06:00
Gregory Nutt
6ef2911dbf SAMV7 USB DCD is code complete and ready for test 2015-03-24 14:30:53 -06:00
Gregory Nutt
9a79129dd4 SAMV7 USB: Updates to interrupt handling logic 2015-03-24 14:07:20 -06:00
Gregory Nutt
2b8853f4fd SAMV7 USB: Updates to endpoint configuration logic 2015-03-24 11:19:34 -06:00
Gregory Nutt
c0c92411ce SAMV7 USB: Updates to early initialization logic 2015-03-24 10:05:21 -06:00
Gregory Nutt
f747b36d95 Fix typo from last commit 2015-03-23 18:40:35 -06:00
Gregory Nutt
e5fbfd2508 Tiva: Remove unconditional debug output from GPIO code 2015-03-23 18:28:18 -06:00
Gregory Nutt
3b0111de9c Tiva: Fix compile errors when GPIO interrupts are not enabled 2015-03-23 17:51:13 -06:00
Gregory Nutt
3875e86436 SAMV7: Add framework for USB DCD. Initial check-in is just the SAMA5 USB DCD with naming changes to get a clean compilation. Needs careful review and comparison with datasheet and, of course, testing 2015-03-23 14:06:53 -06:00
Gregory Nutt
17db74c453 Update some recent Tiva changes so that old LM3S parts at least still build (but have not been retested) 2015-03-23 11:21:26 -06:00
Gregory Nutt
f3ad3efcb4 - ADC driver has been re-organized; configuration is now handled in code 
instead of Kconfig to help reduce bloat and confusion.
- Timer changed to remove ADC coupling in Kconfig to code and moved
configuration up from arch/arm/src/tiva to configs/tm4c123g-launchpad/src.
- GPIO driver needed small fixes in the configuration routines and
discovered false-positive bugs in interrupt testing: interrupts are now
verified to actually be working reliably.
- Attempt to apply some consistency in the tiva arch/ level's interface
to the config/board/ level driver configuration.

From Calvin Maguranis
 2015-03-23 09:12:52 -06:00
Gregory Nutt
5ed5187175 PIC23MX Starter Kit: Looks like we need to use a different linker script with Pinguino 2015-03-21 15:40:22 -06:00
Gregory Nutt
b41738ed62 SAMV7: A little more USB-related stuff 2015-03-21 08:54:01 -06:00
Gregory Nutt
b2bfebff23 SAMV7: Add configuration logic and clock setup for USB device 2015-03-21 07:28:59 -06:00
Gregory Nutt
7ebb54abaa SAMA5: Fix a typo in the Kconfig file 2015-03-21 06:22:04 -06:00
Gregory Nutt
a5831081ce SAMV7: Add USBHS register defintiion header file 2015-03-20 14:08:33 -06:00
Gregory Nutt
d64e8e6732 Include chip/sam_spi.h in sam_spi.h 2015-03-20 11:09:36 -06:00
Gregory Nutt
7242a6194c SAMA5D3: Fix typos in timer/counter header file. From Bob Doiron 2015-03-20 09:19:10 -06:00
Gregory Nutt
d877b1bd50 STM32 RTC lower-half: Fix some errors that cause compilation failures. From shilo.xyz 2015-03-19 12:56:47 -06:00
Gregory Nutt
08fcf035dd SAMV5 EMAC: A few more fixes. Neccessary but not sufficient 2015-03-19 08:54:50 -06:00
Gregory Nutt
256da4837e SAMV7 Ethernet: Fix an order problem that left RX and TX disabled 2015-03-18 18:07:07 -06:00
Gregory Nutt
dd50e03666 SAMV7: Add a sneak internal interface that will allow us to set the MAC address before NSH even starts 2015-03-18 17:23:40 -06:00
Gregory Nutt
6763128345 SAMV7: Updates to Ethernet driver based on comparison with Atmel sample code. Add configuration for other PHY GPIOs. Still no Ethernet interrupts 2015-03-18 15:55:00 -06:00
Gregory Nutt
714af6ebb8 SAMV7 Ethernet: Support getting IP address from the XULT AT24 EEPROM 2015-03-17 14:29:41 -06:00
Gregory Nutt
26923b39de SAMV7 EMAC: Fix range of MCK dividers 2015-03-17 11:19:46 -06:00
Gregory Nutt
42c33033a8 SAMV7: Use D-Cache clean/flush/invalidate by range in EMAC and XDMAC drivers 2015-03-17 09:28:27 -06:00
Gregory Nutt
fdbbab013b Break ARMv7E-M cache operations into separate files; Finish the unimplemented cache operations 2015-03-17 08:48:41 -06:00
Gregory Nutt
32aadd9cc2 SAMV7: Quick'n'dirty port of the SAMA5D4 Ethernet MAC driver to the SAMV7. Still some unresovled issues with DCache handling 2015-03-16 13:51:37 -06:00
Gregory Nutt
0abe4e701b SAMV7: Add Ethernet MAC register definition header file 2015-03-16 11:46:20 -06:00
Gregory Nutt
28ead380ea This commit enables HSMCI functionality in the SAMV71-XULT. TX DMA is, unfortunately, currently disabled. 2015-03-15 12:17:39 -06:00
Gregory Nutt
5fcdb09791 SAMA5: Fix a bug in SAMA5 HSMCI. The bitfield mask and shift values were reversed resulting in a trashed value for the number of blocks in the BLOCKR register. This was sufficient to prevent DMA writes from working. 2015-03-15 09:35:48 -06:00
Gregory Nutt
9e2587ffe9 SAMV7 XDMA: Fix a problem with invalidating the cache on RX DMA 2015-03-14 15:25:32 -06:00
Gregory Nutt
dd342bb4a7 EFM32: Add I2C driver. From Pierre-noel Bouteville 2015-03-14 14:47:53 -06:00
Gregory Nutt
3b0615ece8 SAMV7: More SDRAM logic. It does still does not work 2015-03-14 13:27:00 -06:00