Gregory Nutt <gnutt@nuttx.org>
Run all .c and .h files modified in this PR through nxstyle and correct all coding standard problems.
Xiang Xiao <xiaoxiang@xiaomi.com>
Remove TIME_EXTENDED option to more conform C standard
Note: the code/data size increment is small
mm/Makefile: Same change should be applied to mm/Makefile since the mm/ build is identical to the libc/ build.
libs/libnx/Makefile: Same change should be applied to libnx/Makefile since the mm/ build is identical to the libc/ build.
Author: chao.an <anchao@xiaomi.com>
libs/libc/Makefile: Correct the dependents path
Author: Alan Carvalho de Assis <acassis@gmail.com>
Run nxstyle against .c and .h files and fix it
Author: Juha Niskanen <juha.niskanen@haltian.com>
Fix typos and some incorrect comments
* Simplify EINTR/ECANCEL error handling
1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx
* Unify the void cast usage
1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
This port was effort of a number of people, I rather arbitrarily gave authorship to Guiding Li because he has the largest number of fundamental quashed commits from the Xiamoi repository.
Squashed commit of the following:
Author: Xiang Xiao <xiaoxiang@pinecone.net>
include/nuttx/b2c.h and libx/libc/string: Add non-standard string functions to deal with cases where there are more than 8-bits in a type char.
Author: Gregory Nutt <gnutt@nuttx.org>
Fix several build issues/missing definitiona needed for OpenAMP build in drivers/.
Add OpenAMP code has been reviewed and ran through tools/nxstyle (with all reports accounted for).
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
tools/: Fix the minor issue in Makefile
Author: Gregory Nutt <gnutt@nuttx.org>
drivers/rptun/rptun.c: Review for coding standard. Run against tools/nxstyle.
tools/LibTargets.mk: Fix some TABs that were turned into spaces by a copy-paste.
fs/hostfs: Add configure and build support for hostfs RPC.
drivers/timer: Add configure and build support for syslog RTC.
drivers/syslog: Add configure and build support for syslog RPC.
drivers/serial: Add configure and build support for serial RPC.
Kconfig, tools/*.mk. openamp/: Add basic OpenAMP build support.
drivers/rptun: Add configure and build support for OpenAMP tunnel drivers.
drivers/net: Update Make.defs and Kconfig for OpenSDA support.
Remove drivers/clk/clk-rpmsg.c drivers/power/rpmsg_regulator.c. These depend on upstreaming support for a new subsystem based on the clk/regulator is model from Linux. Removed because we want to separate the activities. We will just try to get the basic OpenAMP support in place for now.
Remove drivers/misc/misc_rpmsg.c and include/nuttx/misc/misc_rpmsg.h. These are specific to the Xiaomi application.
Author: zhuyanlin <zhuyanlin@pinecone.net>
This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
Author: Jianli Dong <dongjianli@pinecone.net>
This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
Author: Guiding Li <liguiding@pinecone.net>
This commit brings in the OpenAMP OS driver/RPC components from https://github.com/FishsemiCode/nuttx. Initial commit is source files only. Additional changes to Kconfig and Make.defs files still needed.
task_spawn() and posix_spawn() are NuttX OS interfaces. In PROTECTED and KERNEL build modes, then can be reached from applications only via a system call. Currently, the number of parameters in a system call is limited to six; these spawn function have seven parameters. Rather than extend the maximum number of parameters across all architectures, I opted instead to marshal the seven parameters into a structure.
*
In order to support builtin in function in protected mode, a task_spawn() system call must be supported. Unfortunately this is overly complex because there is a (soft) limit of 6 parameters in a system call; task_spawn has seven paramters. This is a soft limit but still difficult to extend because it involves assembly language changes to numerous architectures. Better to get more creative.
Squashed commit of the following:
Correct some additional compile-related issues.
Move include/nuttx/binfmt/builtin.h to include/nuttx/lib/builtin.h. Move apps/builtin/lib_builtin_forindex.c to libs/libc/builtin/lib_builtin_forindex.c.
Move binfmt/libbuiltin to libs/libc/builtin. There are calls made directly from apps/nshlib into this logic and hence, must be part of a library that can be shared between the OS and applications.
Provided changes add option (CONFIG_EXECFUNCS_GENERATE_SYSTEM_SYMTAB) to build complete list of available functions and syscalls automatically. The symbolic table is generated in form libsymtab.a which can be reused by application or directly pull in when "g_symtab" and "g_nsymbols" variables are requested by EXECFUNCS configuration.
I have tried to follow mechanisms for library compilation in different kernel protection modes but tested only flat no-MMU build. The basic assumption is that this library and libraries providing syscall stubs and C-library functions are available in user-space context and initial application (usually NSH) registers the symbol table through IOCTL. The table can be reused then by another applications in their address space as kernel allows. Simple for flat or protected mode, I am not sure if really support in MMU mode. It is highly probable that I have made some mistake, overlooked something, but functionality is optional (should not cause troubles in any mode if disabled) and main purpose is to lower memory overhead when more applications are loaded on memory constrained system which usually use direct kernel calling without protection or address space separation. If the table should be provided by kernel to applications then makefiles has to be adjusted.
The legacy '/' delimiter is still supported but not recommend and not advertised.
Squashed commit of the following:
Update configurations instructions in more README.txt files to show ':' delimiter vs '/' delimiter.
Update configurations instructions in various README.txt file to show ':' delimiter vs '/' delimiter.
tools: Update all configuration-related tools to accept ':' separator between board and configuration name.
Squashed commit of the following:
Last minute clean-up
libs/libc/grp/lib_find_grpfile.c: Fix some problems found in testing.
libs/libc/pwd: Finishes off implementation using /etc/passwd.
libs/libc/grp: Finishes off implementation using /etc/group.
libs/libc/pwd/lib_find_pwdfile.c: Add logic to look up user information in /etc/passwd file, if available.
libs/libc/grp/lib_find_grpfile.c: Add logic to look up group information in /etc/group file, if available.
Added stubbed implementations of getpwuid, getpwuid_r, getpwnam, and
getpwnam_r. These functions are essentially stubs pretending that NuttX
supported users and that the only configured user in the system was 'root'
with uid 0. The intend is not to provide meaningful new features, but to ease
porting of foreign source code to NuttX.
- Added an alphasort implementation
- Added a scandir implementation
- Added DT_* literals to include/dirent.h: Apparently those are not required by POSIX, but are part of 4.3BSD and available in glibc as well.
libs/libc/misc/Make.defs: For platforms whose CPP tool does not support a variable number arguments to pre-processor macros, we may still need to build the debug functions even when CONFIG_DEBUG_FEATURES is not selected. For example, __alert() may be needed is CONFIG_ARCH_STACKDUMP is set.
configs/makerlisp: Add an sdboot configuration that will load .hex files from the SD card.
Squashed commit of the following:
configs/makerlisp: Update comments about use of serial console.
configs/makerlisp: Add LED support, remove vestiges of button support (the board has no user buttons). Add support for SPI-based MMC/SD card slot.
arch/z80/src/ez80: Fix some link problems.
libs/libc/syslog/lib_syslog.c: The ZDS-II toolchain does not declare va_coy in stdarg.h. I think that the use of va_copy in vsyslog() is no necessary.
configs/makerlisp: Initial configuration directories cloned from ez80f910200zco with little more than naming changes.
libs/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
syscall/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
wireless/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
Documentation/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
include/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
drivers/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
sched/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
configs: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
arch/xtensa: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
arch/z80: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
arch/x86: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
arch/renesas and arch/risc-v: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
arch/or1k: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
arch/misoc: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
arch/mips: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
arch/avr: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
arch/arm: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
Add three patches about STM32 intherupts and network loopback files
* Add the missing macro STM32_IRQ_NIRQS used by ./arch/arm/src/stm32f7/stm32_irq.c
Signed-off-by: Kejun ZHOU <zhoukejun@outlook.com>
* The struct in_addr doesn't have the member sin_addr.
Signed-off-by: Kejun ZHOU <zhoukejun@outlook.com>
* The function lib_lo_ipv6match() is for IPv6.
Correct the function it calls from lib_lo_ipv4matchto() to lib_lo_ipv6match().
Also add CONFIG_NET_IPv6 for configuration.
Signed-off-by: Kejun ZHOU <zhoukejun@outlook.com>
libs/libc/pthread/pthread_spinlock.c: Resolve several TODO issues by accessing up_testset() via the boardctl() interface rather than attempting to call it directly.
configs/boardctl.c, include/sys/boardctl.h: Add access to architecture-specific up_testset() via boardctl().
arch/Kconfig's, sched/Kconfig, and include/nuttx/spinlock.h: Spinlocks are not available unless the architecture supports the up_testset() operation.
Fixed coding standard error in several files. Use of while( is incorrect; a space is required between while and (. Also ran tools/nxstyle and fix thoses complaints as well in most files.
Changes to comply with coding standard. Mostly focused on files with missing space after keyword in if(, switch(, and for(. Offending files also got changes to comply with tools nxstyle. If there were logs of nxstyle complaints, the file also got a taste of tools/indent.sh. Still need to fix occurrences of while( with missing space. There are a lot of them.
- Numbered arguments now work by using two pass parsing and an argument list.
The maximum number of numbered args is determined by CONFIG_LIBC_NL_ARGMAX
which is then copied into NL_ARGMAX.
- Size of pointer argument ('p') is determined before output.
include/limits.h: Define NL_ARGMAX (as well as some of the other 'invariant
values' per http://pubs.opengroup.org/onlinepubs/7908799/xsh/limits.h.html)
sched/init/nx_start.c: Add support for CONFIG_BOARD_DRIVER_INITIALIZE. If this option is selected then nx_start() will call a board-provided function board_driver_initialize() immediately after calling up_initialize().
Rename CONFIG_BOARD_INITIALIZE to CONFIG_BOARD_LATE_INITIALIZE.
Raname board_initialize() to board_late_initialize()
The previous implementation was probably corect. On Cygwin with GCC I see this:
int main(int argc, char **argv)
{
printf("Value 1.2 is: [%f]\n", 1.2);
printf("Value 0.1 is: [%f]\n", 0.1);
printf("Value 0.0: [%f]\n", 0.0);
printf("Value 347.6872: [%f]\n", 347.6872);
}
Generates output
Value 1.2 is: [1.200000]
Value 0.1 is: [0.100000]
Value 0.0: [0.000000]
Value 347.6872: [347.687200]
This reverts commit eb0223bc7f.
Author: Gregory Nutt <gnutt@nuttx.org>
TODO: Remove 'Missing fscanf()' bug
Clean up remaining complaints for tools/nxstyle
Apply tools/detab, rmcr, convert-comments, lowhex, and indent.sh to the new and highly modified files.
Author: Johannes <nivus.entwicklung@gmail.com>
- Move vscanf logic to lib_sscanf.c Switched to stream interface (tricky, because the old implementation used massive read ahead, which isn't suitable for streams, chars already read are gone).
- Added scanf and fscanf
- Added hh, h, and ll modifiers
- Fixes for standard compliance in scanf
- Fixes for standard compliance in strto... function family (don't consume single '-' or '+', allow sign in strotul(l))
Squashed commit of the following:
sched/sched/sched_getsockets.c: Fix an error in conditional compilation.
fs/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
Documentation/: Remove all references to CONFIG_NSOCKET_DESCRIPTORS == 0
include/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
libs/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
net/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
sched/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
syscall/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
tools/: Fixups for CONFIG_NSOCKET_DESCRIPTORS no longer used to disable sockets.
Squashed commit of the following:
configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3.
fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS.
syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0
binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3
configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
