sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
29,674 Commits 1 Branch 0 Tags 291 MiB
b10d2bbc8c
Commit Graph

13265 Commits

Author SHA1 Message Date
Gregory Nutt
b0fda33e13 Kconfig: Rename CONFIG_ARM_TOOLCHAIN_IAR to CONFIG_ARCH_TOOLCHAIN_IAR 2017-05-13 16:01:38 -06:00
Gregory Nutt
27805315f4 Tiva I2C: Correct an in conditional compilation 2017-05-13 14:01:42 -06:00
Gregory Nutt
6e4918c557 Remove CONFIG_ARM_TOOLCHAIN_GNU; replace with CONFIG_ARCH_TOOLCHAIN_GNU 2017-05-13 13:28:15 -06:00
Gregory Nutt
7fe112fe4c Kconfig/deconfigs: Add CONFIG_ARCH_TOOLCHAIN_GNU to indicate that the toolchain is based on GNU gcc/as/ld. This is in addition to the CPU-specific versions of the same definition. 2017-05-13 11:44:12 -06:00
Gwenhael Goavec-Merou
02535be36a STM32F410. Add support for STM32Fr10. STM32F410 is a version of STM32F4 with 32 KB of RAM and 62 or 128 KB of flash. 2017-05-13 08:40:09 -06:00
David Sidrane
c4a2e1399b Merged in david_s5/nuttx/upstream_kinetis (pull request #368) 
kinetis:K66 GPIO and pin mux cleanup

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-05-13 10:37:20 +00:00
David Sidrane
69a8aecbc8 kinetis:K66 define ALT1 to match ref manual 2017-05-12 17:21:54 -10:00
David Sidrane
700e4ff5b6 kinetis:K66 fixed TMP2_CH1 definition 2017-05-12 17:03:27 -10:00
Alan Carvalho de Assis
853d332b6c Move CAN subsystem to its own directory and put device drivers there 
Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com>
 2017-05-12 11:48:47 -03:00
Juha Niskanen
46851b33b2 STM32L4: port stm32l4_serial_get_uart function from STM32F7 2017-05-12 15:54:48 +03:00
Gregory Nutt
0de294a586 Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they. 2017-05-11 13:35:56 -06:00
Gregory Nutt
3091050963 STM32L4: Review of last PR + Move separate stm32l4_flash.h; move hardware-specific definitions to chip/stm32l4_flash.h 2017-05-11 06:58:39 -06:00
Juha Niskanen
c74a51f789 STM32L4: add internal flash write support 2017-05-11 14:35:27 +03:00
Juha Niskanen
4f18b40429 mtd/config: erase block between block read and write 2017-05-10 08:25:39 -06:00
Juha Niskanen
e04ea9e3e3 Merged in juniskane/nuttx_stm32l4/stm32l4_dbgmcu_pr (pull request #361) 
STM32L4: add dbgmcu header files

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-05-09 17:06:32 +00:00
Gregory Nutt
3d73a04259 Merged l432kc into master 2017-05-09 11:03:42 -06:00
Gregory Nutt
2043e1a114 IOBs: Move from driver/iob to a better location in mm/iob 2017-05-09 07:35:30 -06:00
Juha Niskanen
ce1ad33289 STM32L4: add dbgmcu header files 2017-05-09 14:13:51 +03:00
Sebastien Lorquet
d591d3ac4e Restore settings for UARTs 4 and 5 2017-05-09 11:38:14 +02:00
Sebastien Lorquet
5204f19e4f fix typo found by Juha during review 2017-05-09 11:32:16 +02:00
Sebastien Lorquet
c1cf1269c7 Adapt stm32l43x pin definitions 2017-05-09 10:58:04 +02:00
David Sidrane
014b69e120 removed stray paren. 2017-05-08 22:56:05 +00:00
David Sidrane
8406b40baa Merged in david_s5/nuttx-16/david_s5/stm32serial-dma-buffer-round-off-not-up-1494258804216 (pull request #357) 
stm32:Serial DMA buffer round off not up

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-05-08 20:32:44 +00:00
Gregory Nutt
aa11d637a8 STM32 TIM: Add method to get timer width. Freerun timer: Use timer width to get the correct clock rollover point. 2017-05-08 12:33:15 -06:00
David Sidrane
546e7acb99 stm32:Serial DMA buffer round off not up 2017-05-08 15:54:03 +00:00
David Sidrane
b8ef079951 stm32:stm32_serial Forgot the -1 on mask 2017-05-08 03:43:36 +00:00
David Sidrane
0b2fb5a396 Merged in david_s5/nuttx/upstream_stm_dma (pull request #355) 
stm32: serial Allow configuring Rx DMA buffer size

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-05-06 17:49:48 +00:00
David Sidrane
b62ef579c8 stm32: serial Allow configuring Rx DMA buffer size 2017-05-06 05:16:21 -10:00
David Sidrane
5d6da5f4bb kinetis:Add ARCH_HAVE_I2CRESET 2017-05-06 04:52:48 -10:00
David Sidrane
97260321f2 kinetis:k66 Pin mux configure all I2C signals as Open Drain 
The output structure of the GPIO for I2C needs to be open
   drain.  When left at the default, one can observe on a scope
   the slave contending with the push-pull during the ACK
 2017-05-05 15:06:32 -10:00
David Sidrane
ce98cedb17 kinetis:k64 Pin mux configure all I2C signals as Open Drain 
The output structure of the GPIO for I2C needs to be open
   drain.  When left at the default, one can observe on a scope
   the slave contending with the push-pull during the ACK
 2017-05-05 15:06:24 -10:00
David Sidrane
af1f48c1c5 kinetis:k60 Pin mux configure all I2C signals as Open Drain 
The output structure of the GPIO for I2C needs to be open
   drain.  When left at the default, one can observe on a scope
   the slave contending with the push-pull during the ACK
 2017-05-05 15:06:14 -10:00
David Sidrane
1d9d13c426 kinetis:k40 Pin mux configure all I2C signals as Open Drain 
The output structure of the GPIO for I2C needs to be open
   drain.  When left at the default, one can observe on a scope
   the slave contending with the push-pull during the ACK
 2017-05-05 15:06:09 -10:00
David Sidrane
979e671cf0 kinetis:k20 Pin mux configure all I2C signals as Open Drain 
The output structure of the GPIO for I2C needs to be open
   drain.  When left at the default, one can observe on a scope
   the slave contending with the push-pull during the ACK
 2017-05-05 15:06:00 -10:00
Gregory Nutt
1cd3b3f590 Fix errors introduced into Kinetis serial when I unsuccessfully tried to correct coding standard violations. Folks, things will be better for everyone if you just follow that standard. 2017-05-05 14:47:11 -06:00
Gregory Nutt
0e49db7626 Add a blank line. 2017-05-05 09:35:47 -06:00
Juha Niskanen
35883ff9ae Merged in juniskane/nuttx_stm32l4/l4dev (pull request #347) 
STM32L4: add support for many new MCUs from STM32L4X3XX product line and Nucleo-L452 board

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-05-05 15:31:07 +00:00
David Sidrane
f29981e473 kinetis:Added HW flow control and termios 2017-05-05 07:33:15 -06:00
David Sidrane
b6a8db1b39 Kinetis: Use optional BOARD_OSC_CR and BOARD_OSC_DIV in clock configuration 2017-05-05 07:18:39 -06:00
David Sidrane
29ef635e89 Kinetis:Add OSC_DIV to the kinetis_osc header 2017-05-05 07:16:11 -06:00
David Sidrane
f73e2aab8d Kinetis:Fixed CLKSRC Bit Names 2017-05-05 07:14:00 -06:00
David Sidrane
2171523f50 Kinetis:Add TPM to K66 chip 2017-05-05 07:12:52 -06:00
Juha Niskanen
71accfc57b STM32L4: add more chips to Kconfig 
(This also removes DPFPU/DTCM/ITCM features again, fixing a
recent git history hickup.)
 2017-05-05 11:03:49 +03:00
Juha Niskanen
a5e9724224 STM32L4: firewall for stm32l4x3xx 
Not tested for any product family, but now it at least compiles.
L496 devices can have one bit wider Volatile Data Segment.
 2017-05-05 10:15:09 +03:00
Juha Niskanen
075a8b913c STM32L4: separate SYSCFG into product line specific files for clarity 2017-05-05 10:10:37 +03:00
Juha Niskanen
92f4277b1e Merged in juniskane/nuttx_stm32l4/stm32l4_i2c_pr (pull request #346) 
STM32L4: stm32l4_i2c: change wrong macro to CONFIG_I2C_POLLED

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-05-04 19:29:08 +00:00
Jussi Kivilinna
7035723aeb STM32F7 serial: Allow configuring Rx DMA buffer size 2017-05-04 07:09:19 -06:00
Jussi Kivilinna
acf0d17e5a Fix STM32F7 I2C interrupt handler 2017-05-04 06:51:44 -06:00
Juha Niskanen
80c2d384bb STM32L4: flash: update override config macros and add FLASH_CONFIG_B 2017-05-04 15:24:16 +03:00
Juha Niskanen
ae22eb224a STM32L4: changes needed for STM32L452 and Nucleo-L452RE board 
GPIO and UART seem similar across STMicro product matrix,
so renamed files accordingly. RCC is cloned just in case,
while conflicting differences there seem to be very minor.
 2017-05-04 15:23:38 +03:00