Commit Graph

4259 Commits

Author SHA1 Message Date
Diego Herranz
e6bd444fd3 drivers/sensors/isl29023.c: fix compilation error and warnings
- "op_mode" instead of "mode" (compilation error)
- CONFIG_ISL29023_I2C_FREQUENCY instead of CONFIG_LM75_I2C_FREQUENCY
(probably a leftover)
- Fix a couple of format warnings: now using PRIu32
- Also minor comment changes
2021-12-22 20:44:52 -06:00
Xiang Xiao
348b9b0d35 net/slip: Update IFF_RUNNING flag by netdev_carrier_on and netdev_carrier_off
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-12-22 07:15:00 -03:00
Xiang Xiao
e63e083a2f net/tun: Update IFF_RUNNING flag by netdev_carrier_on and netdev_carrier_off
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-12-22 07:15:00 -03:00
Xiang Xiao
500d8541fa net/loopback: Update IFF_RUNNING flag by netdev_carrier_on and netdev_carrier_off
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-12-22 07:15:00 -03:00
songnannan
0a62701c1a fix: regulator: set ioexpander direction in regulator gpio init.
Signed-off-by: songnannan <songnannan@xiaomi.com>
2021-12-21 08:47:17 -06:00
Xiang Xiao
dfcb3cea59 Replace self defined macros with NET_SOCK_[FAMILY|TYPE|PROTOCOL]
NET_SOCK_* is defined by nuttx/net/netconfig.h and then can be shared

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-12-21 11:02:33 -03:00
Juha Niskanen
422ceec99b Fix typos in comments and Kconfig files
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2021-12-21 03:26:16 -06:00
chao.an
928426295f input/ads7843e: complement critical section operation
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-12-20 12:35:03 -06:00
Xiang Xiao
187d9e58c9 Remove the unnecessary inclusion of assert.h and string.h from public header files
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-12-20 10:30:08 +01:00
Petro Karashchenko
67d8a82393 Kconfig: fix non-string default values uniformity
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2021-12-20 00:10:57 +01:00
Diego Herranz
34c7bec0dc drivers/sensors/hdc1008: fix formatting after decimal point
Modulo operation used to calculate digits after decimal point,
but if that result is <10, a leading zero wasn't added, giving a
wrong value.
2021-12-17 23:36:38 -06:00
Diego Herranz
1fe41381d5 drivers/sensors/hdc1008: include signal.h
Fix implicit declaration warning of nxsig_usleep.
2021-12-17 23:36:38 -06:00
Jiuzhu Dong
153254a496 sensor: reset interval,latency and circbuf when sensor is closed
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
2021-12-17 23:36:07 -06:00
Jiuzhu Dong
f35c6d7ef1 syslog/rpmsg: using up_putc to force flush syslog_rpmsg buffer
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
2021-12-17 11:43:08 -06:00
zhuyanlin
5df041ca55 ioe-rpmsg: bind server to diffent ept struture
N/A

Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
2021-12-16 01:29:24 -06:00
zhuyanlin
e75bcde0d6 driver:ioe_rpmsg: set_option add regval parameter
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
2021-12-16 01:29:24 -06:00
zhuyanlin
e43e1423d6 driver/ioexpander: add ioe_rpmsg server and client
N/A

Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
2021-12-16 01:29:24 -06:00
Petro Karashchenko
6c255f2d07 drivers/analog: add mcp48xx dac support
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2021-12-15 07:02:56 -06:00
Petro Karashchenko
51a2db6ffc Kconfig: improve uniformity
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2021-12-14 07:32:48 -06:00
Petro Karashchenko
3b3cebdd3e typo: fix type for word "instance"
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2021-12-14 06:39:34 -06:00
Xiang Xiao
69468b700d libc: Move syslog_stream from nuttx/streams.h to drivers/syslog/syslog.h
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-12-14 00:51:59 -06:00
ligd
9a86aa7f77 syslog_rpmsg: fix typo
Signed-off-by: ligd <liguiding1@xiaomi.com>
2021-12-13 11:08:28 -06:00
ligd
93426ca7cc syslog_rpmsg: update syslog_rpmsg to support non-overwrite
Signed-off-by: ligd <liguiding1@xiaomi.com>
2021-12-13 11:08:28 -06:00
ligd
5b369c5cec libs/lbc: remove CHAR_BIT = 16 support
For CEVA platform CHAR_BIT is 16, and will do lots of extra work
when use IPC.
We will not support this platform anymore, so remove all the b2c operations.

Signed-off-by: ligd <liguiding1@xiaomi.com>
2021-12-13 11:08:28 -06:00
ligd
f5ddbb317f rptun: support can_recursive check for openamp
Signed-off-by: ligd <liguiding1@xiaomi.com>
2021-12-13 08:32:57 -06:00
Jiuzhu Dong
8b0d45abef charger: fix crash when notify without pollwaiter
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
2021-12-13 05:34:49 -06:00
Xiang Xiao
3d6a5a2d0d syslog: Add [] around the prefix like others
make the output format consistent

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-12-11 10:08:32 -06:00
Jiuzhu Dong
befad07fd4 bch: specify the alignment of bch buffer by CONFIG_BCH_BUFFER_ALIGNMENT
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
2021-12-11 10:01:54 -06:00
Jiuzhu Dong
f81ffb51cc bch/ioctl: support FLUSH cache by cmd: BIOC_FLUSH
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
2021-12-11 10:01:54 -06:00
zhanghu6
84019b9170 noteram: when the buffer overflow happen and give the asan report
READ of size 1 at 0x5ec78f90 thread T0
0 0x59682d7a in noteram_remove note/noteram_driver.c:432
1 0x59683c43 in sched_note_add note/noteram_driver.c:854
0x5ec78f90 is located 0 bytes to the right of global variable 'g_noteram_info' defined in 'note/noteram_driver.c:95:30' (0x5ec78780) of size 2064
0x5ec78f90 is located 48 bytes to the left of global variable '*.Lubsan_type0' defined in 'note/noteram_driver.c' (0x5ec78fc0) of size 10
reason: that read pos is tail of g_noteram_info.ni_buffer causes overflow
2021-12-10 12:33:14 -06:00
Jari van Ewijk
2e47ef32cf GPIO driver: register all pintypes as generic /dev/gpioN 2021-12-09 23:55:12 -06:00
zhuyanlin
3e8a3c9cc2 driver:regulator: add delay feature
N/A
2021-12-07 23:29:05 -06:00
zhuyanlin
b7db4304d6 driver/power: add gpio regulator
N/A

Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
2021-12-07 23:29:05 -06:00
zhuyanlin
eed6510202 driver:power:add regulator remote proc
N/A

Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
2021-12-07 23:29:05 -06:00
zhuyanlin
c8f1a9e430 driver:power:add regulator framework
N/A

Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
2021-12-07 23:29:05 -06:00
Huang Qi
3d4be7089c drivers/serial/uart_16550: Fix warning for format
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2021-12-07 23:28:33 -06:00
zhuyanlin
565964a12f driver: add clk framework
N/A

Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
2021-12-07 01:35:45 -06:00
Huang Qi
a24005b70b drivers/serial: Fix offset calculation in 16550
Signed-off-by: Huang Qi <no1wudi@qq.com>
2021-12-05 07:02:40 -06:00
Petro Karashchenko
e71b66c792 drivers/mtd: add MTD null driver support
- fix memory leak during RAM MTD initialization
- fix calculations for FILE MTD device with customized
  block and erase sizes

Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2021-12-05 03:11:02 -06:00
Sebastien Lorquet
437424d234 Support multiple SST26 devices on the same spi bus 2021-11-30 18:45:27 +01:00
Sebastien Lorquet
7f11255662 fix overflow checks in mtdpart 2021-11-30 10:43:27 -06:00
zhangguoliang
b16eea4f14 feat: charger: add operation to get out voltage
Signed-off-by: zhangguoliang <zhangguoliang3@xiaomi.com>
2021-11-26 11:16:53 +01:00
weizhifang
e20becd91b feature: charge: add add chipid ioctl api
1.add chipid ioctl api to battery monitor code
2.add chipid itctl api to battery charger code
3.add chipid itctl api to battery gauge code

Signed-off-by: weizhifang <weizhifang@xiaomi.com>
2021-11-26 11:16:53 +01:00
David Sidrane
08007dca8a ramtron:Remove errant code and definitions
After reviewing the data sheet for MB85RS256B, CY15B104Q, and
  FM25V0x the status register definitions in the driver were
  wrong as was the use.
2021-11-25 20:52:10 -06:00
anjiahao
41c3b42468 change /dev/syslog & /dev/ramlog for unix standard
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
2021-11-24 05:19:46 -06:00
Tobias Johansson
c7e604b20b drivers: audio: Fix build warning in cxd56
Signed-off-by: Tobias Johansson <tobias.johansson@sony.com>
2021-11-22 03:38:09 -06:00
Tobias Johansson
6f579b8118 drivers: audio: Use lib header for cxd56 SRC
Removes duplicate definitions in header cxd56_src.h and
includeis the proper library header samplerate.h instead.
Also corrects some related build issues.

Signed-off-by: Tobias Johansson <tobias.johansson@sony.com>
2021-11-22 03:38:09 -06:00
Tobias Johansson
6735cf412e drivers: audio: Don't stop cxd56 when stopped
Avoid trying to stop the driver when already stopped.

Signed-off-by: Tobias Johansson <tobias.johansson@sony.com>
2021-11-22 03:38:09 -06:00
Tobias Johansson
e9e15689d0 drivers: audio: Close MQ in cxd56 SRC
Closes the message queue file handle when the sample
rate converter is de-initialized.

Signed-off-by: Tobias Johansson <tobias.johansson@sony.com>
2021-11-22 03:38:09 -06:00
Tobias Johansson
3828dd2b11 drivers: audio: Only start amp for HS in cxd56
Only enable the amplifier during playback to avoid clicks.

Signed-off-by: Tobias Johansson <tobias.johansson@sony.com>
2021-11-22 03:38:09 -06:00