Description:
Example to interact with KEY button and user external button connected to PA1.
For KEY button pull-up resistor is active, board schematic does not show any pull-up or pull-down resistor.
Results: Example working as expected.
BlackPill PWM example
Description:
PWM example using PB0 - Timer3 - Channel 3
Create default configuration for the example.
Controlling_RGB_LED
Description: Controlling a RGB LED on NuttX for Black Pill board [STM32F411]
Note: Example currently not working as expected.
(1) Keep the `.init_array` and `.ctors` symbols and sort them according to their initialization priority.
(2) Exclude symbols ending with crtend.* and crtbegin.* to support c++
application.if we not exclude crtend.* crtbegin.* frame_dummy will be
added when enable any c++ application with global variables, this symbol
execution is problematic, removing it does not affect the application.
Signed-off-by: cuiziwei <cuiziwei@xiaomi.com>
nucleo-f4229zi board does not come with external ram.
Looking at netnsh config, these changes are also not present.
Issue found when registering i2c char driver for i2ctool. zalloc
returned -ENOMEM
These configs are changed based on below rules.
1. always enable +CONFIG_LV_USE_NUTTX=y
2. If touchpad is used, enable +CONFIG_LV_USE_NUTTX_TOUCHSCREEN=y
3. enable log by +CONFIG_LV_USE_LOG=y
4. If -CONFIG_LV_MEM_CUSTOM=y previously defined, replace it with +CONFIG_LV_USE_CLIB_MALLOC=y +CONFIG_LV_USE_CLIB_SPRINTF=y +CONFIG_LV_USE_CLIB_STRING=y
5. If -CONFIG_LV_PORT_USE_FBDEV=y, default config is for fbdev. If -CONFIG_LV_PORT_USE_LCDDEV=y, +CONFIG_LV_USE_NUTTX_LCD=y
6. Remove all -CONFIG_LV_TICK_CUSTOM=y -CONFIG_LV_TICK_CUSTOM_INCLUDE="port/lv_port_tick.h"
7. If -CONFIG_LV_PORT_LCDDEV_DOUBLE_BUFFER=y, replace it with CONFIG_LV_NUTTX_LCD_DOUBLE_BUFFER=y. For fbdev, double buffer is automatically detected.
8. If -CONFIG_LV_COLOR_16_SWAP=y, need to upgrade the LCD driver to support hardware byte order swap.
Signed-off-by: Xu Xingliang <xuxingliang@xiaomi.com>
This patch allows user to simply select which GPIOs he wants to use
and access them via /dev/gpio_a0 or similar device with standard
gpio driver.
By default gpio names match pin names printed on the board. So when
enabling A3 pin, it will show as /dev/gpio_a3 in runtime. This name
can be changed in kconfig.
User can also select pin function (input, output, interrupt) as well
as standard pin settings like, pull up/down, output type
pushpull/open drain etc.
All pins that are exposed via boards goldpins are listed in Kconfig.
Extra pins that are supported by chiip but are not exposed for easy
usage are not listed.
To have this nice Kconfig configuration and for things to be easily
debugable/understandable it requires code to have big Kconfig and
header file with all possible definitions
Because of file sizes I decided to split gpio related kconfig and
header into separate files. Otherwise it would really make original
files hard to read and find anything.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
The DS1307 was used as board specific, but it is better move it to
stm32/common to be easily used by other boards as well.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
