sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
26,983 Commits 1 Branch 0 Tags 291 MiB
b29b2874fe
Commit Graph

12221 Commits

Author SHA1 Message Date
Gregory Nutt
59f626313d Changes from review of last PR 2016-07-25 15:16:51 -06:00
Gregory Nutt
250b9d5597 Merged in JordanMacIntyre/nuttx/PWM_driver (pull request #106) 
Pwm_driver
 2016-07-25 14:59:45 -06:00
jmacintyre
f5ea811c97 create PWM driver, still having issues with building 2016-07-25 14:17:07 -05:00
Stefan Kolb
899a8aa2f0 SAMV7 TRNG: Missing endif. 2016-07-25 12:30:39 -06:00
Gregory Nutt
e895e19b9f Minor changes from review of last PR 2016-07-24 07:45:46 -06:00
Wolfgang Reissnegger
c0fa319f2b SAM3/4 UDP: Fix handling of endpoint RX FIFO banks. 
This fixes a race condition where the HW fills a FIFO bank while the SW is
busy, resulting in out of sequence USB packets.
 2016-07-23 20:11:04 -07:00
Wolfgang Reissnegger
cc191a977d SAM3/4 UDP: Remove redundant EP state assignment. 2016-07-23 20:11:03 -07:00
Wolfgang Reissnegger
f3a6a40f62 SAM3/4 Serial: Fix warning when CONFIG_SUPPRESS_UART_CONFIG is set. 2016-07-23 16:23:49 -07:00
Gregory Nutt
9b9b721406 Rename alarm_enable to rtc_alarm_enabled; mark inline 2016-07-23 12:01:57 -06:00
Gregory Nutt
5a0f9fcb7d Fix STM32 RTC Alarm interrupts. They were being enabled BEFORE the interrupt system was being initialized. 2016-07-23 10:36:06 -06:00
Gregory Nutt
14de4b99f8 Simplify some computations 2016-07-23 08:13:25 -06:00
Gregory Nutt
0984fcda44 Back out last RTC alarm changes. I am mistaken, the interrupts are enabled by stm32[l4]_exti_alarm(). 2016-07-23 07:53:08 -06:00
Gregory Nutt
65ac11692d STM32L4 RTC is cloned from F4; needs same fix. 2016-07-23 07:33:44 -06:00
Gregory Nutt
829c5610da STM32 F4 RTC ALARM: Was not enabling interrupts. 2016-07-23 07:19:14 -06:00
Gregory Nutt
e77872057d Fix up a few remaining incorrect CONFIG_GPIO_IRQ 2016-07-22 15:01:00 -06:00
Gregory Nutt
e897ccb940 Rename x86 QEMU version of CONFIG_GPIO_IRQ to CONFIG_QEMU_GPIOIRQ 2016-07-22 14:54:00 -06:00
Gregory Nutt
5a9519d636 Rename HCS12 version of CONFIG_GPIO_IRQ to CONFIG_HCS12_GPIOIRQ 2016-07-22 14:53:17 -06:00
Gregory Nutt
c00ad93165 Rename HC version of CONFIG_GPIO_IRQ to CONFIG_HCS12_GPIOIRQ 2016-07-22 14:46:54 -06:00
Gregory Nutt
e6137ff129 Rename SAMD/L version of CONFIG_GPIO_IRQ to CONFIG_SAMDL_GPIOIRQ 2016-07-22 14:38:33 -06:00
Gregory Nutt
3aea9b8bf3 Rename KL version of CONFIG_GPIO_IRQ to CONFIG_KL_GPIOIRQ 2016-07-22 14:34:21 -06:00
Gregory Nutt
5386403476 Rename Kinetis version of CONFIG_GPIO_IRQ to CONFIG_KINETIS_GPIOIRQ 2016-07-22 14:30:37 -06:00
Gregory Nutt
264578135d Rename LP11xx version of CONFIG_GPIO_IRQ to CONFIG_LPC11_GPIOIRQ 2016-07-22 14:23:31 -06:00
Gregory Nutt
360efe03c1 Rename LP17xx version of CONFIG_GPIO_IRQ to CONFIG_LPC17_GPIOIRQ 2016-07-22 14:18:30 -06:00
Gregory Nutt
369c942605 uint8_t is big enough for global. Range of values only 2-10 2016-07-21 15:18:27 -06:00
Gregory Nutt
67900beaaa LP43 Heap: REALLY eliminate the warning this time 2016-07-21 15:15:56 -06:00
Gregory Nutt
d5acc120a4 Kinetis K60: Fix some bad conditional compilation 2016-07-21 14:22:00 -06:00
Gregory Nutt
a2035f7efd Move include/nuttx/1wire.h to include/nuttx/drivers/1wire.h 2016-07-21 13:51:28 -06:00
Gregory Nutt
96d5b734a8 Add missing TWI definitions 2016-07-21 08:01:59 -06:00
Gregory Nutt
0d98507af1 Eliminate a warning 2016-07-20 16:47:23 -06:00
Gregory Nutt
ee9c66186c ramdisk.h moved from include/fs/nuttx/ to include/nuttx/drivers. 2016-07-20 14:02:18 -06:00
Gregory Nutt
1b9b3a7b47 pwm.h moved from include/nuttx/ to include/nuttx/drivers. 2016-07-20 13:48:24 -06:00
Gregory Nutt
ddcaa3d425 can.h moved from include/nuttx/ to include/nuttx/drivers. 2016-07-20 13:38:36 -06:00
Gregory Nutt
4b4dbc79a2 Move driver related prototypes out of include/nuttx/fs/fs.h and into new include/drivers/drivers.h 2016-07-20 13:15:37 -06:00
Sagitta Li
e07bd757ba STM32 F107: TIM8 not supported in F105/F107 2016-07-20 08:51:03 -06:00
Ken Pettit
b926334a19 Add file was not included in the original commit 2016-07-19 10:39:43 -06:00
Vytautas Lukenskas
ac2a5e079c Add change missing in Make.defs for last LPC43xx change 2016-07-19 09:28:15 -06:00
Gregory Nutt
8eeecff79d Replace some C99 comnents with C89 comments 2016-07-19 08:19:53 -06:00
Ken Pettit
148cf1ac22 Adds the simulated QSPI (N25Q) flash to the simulation and modify sim up_spiflash.c to enable it to run with different MTD drivers based on config options (currently m25p, sst26 and w25). 2016-07-19 07:33:44 -06:00
Vytautas Lukenskas
f222d37aa7 Extend LPC43xx EMC code to support SDRAM on a dynamic memory interface. 2016-07-19 07:11:04 -06:00
Gregory Nutt
2119c5ce19 Fix another function naming error 2016-07-18 12:40:27 -06:00
Gregory Nutt
d36da2b560 Fix bad dev[u]random_register() function return value. 2016-07-18 12:25:05 -06:00
Gregory Nutt
d5388eca05 devrandom_register() must be called before devurandom_register() 2016-07-18 11:24:04 -06:00
Gregory Nutt
078bbe5e5c All H/W RNG Drivers: Can now be configured to register as /dev/random and/or /dev/urandom 2016-07-18 11:10:37 -06:00
Gregory Nutt
1660329d06 Rename up_rnginitialize to devrandom_register 2016-07-18 10:55:37 -06:00
Gregory Nutt
fe315f867a Costmetic 2016-07-17 17:01:35 -06:00
Gregory Nutt
006f4a5818 HOSTFS: Fix some errors in first cut at repartitioning 2016-07-17 16:31:14 -06:00
Gregory Nutt
2b28a1f3e5 SIM HOSTFS: First cut at changes to get it working on Cygwin. 2016-07-17 15:59:45 -06:00
Gregory Nutt
76dc238baf Add more name mappings to nuttx-names.dat 2016-07-17 09:44:27 -06:00
David Alessio
6cefbc0c3f This change provides an option to add /dev/urandom to all architectures. The pseudo-random algorithm I choose strikes an arguably-good balance between being "random" and small/fast enough for 8/16 bit MCUs. It’s the well-documented xorshift128 algorithm. It has an internal state of 128 bits that can be [re-]seeded with a write. 2016-07-17 06:42:26 -06:00
Alan Carvalho de Assis
91ba0be667 Enable TERMIOS support in stm32discovery/pseudoterm configuration 2016-07-16 17:49:37 -06:00
Gregory Nutt
ba62b49190 SIM: Add more names to nuttx-namex.dat 2016-07-16 16:14:18 -06:00
Gregory Nutt
873f1f6da5 Merged in HeathPetersen/nuttx (pull request #102) 
EXEEXT only needs to be appended once
 2016-07-15 17:11:22 -06:00
Heath Petersen
c57672aeab EXEEXT only needs to be appended once 2016-07-15 17:50:00 -05:00
Gregory Nutt
e7f0a56498 Correct some comments 2016-07-15 13:13:53 -06:00
Gregory Nutt
7b298a828d up_pminitialize() needs to be called from instances of up_initialize() 2016-07-15 13:11:28 -06:00
Gregory Nutt
d3b3c71d97 All architectures: Add logic to automatically register /dev/ptmx a boot time 2016-07-15 11:54:41 -06:00
Young
7005fafb95 Fix a bug of tiva i2c ports configuration 2016-07-15 11:03:48 +08:00
Gregory Nutt
18059d6821 Restore Wolfgang Reissnegger's PR as submitted. My mistake is it late here. 2016-07-14 18:39:51 -06:00
Wolfgang Reissnegger
f982180ec7 SAM3/4 Timer: Remove broken definitions for BMR register. 
Per documentation SAM4S and SAM4E have the BMR register values
as they are already defined. No need for chip specific values.

In addition:
 - CONFIG_ARCH_CHIP_SAM4s has wrong lower case 's' so the definitions would
   not be used anyways for SAM4S builds.
 - TC_BMR_TC2XC2S_TIOA2 does not make sense. There is no way to loop back
   TC2's TIOA2 into itself.
 2016-07-14 18:17:05 -06:00
Gregory Nutt
54bc6c88dd Fix cast of return value 2016-07-14 10:21:31 -06:00
Gregory Nutt
3f6835fda9 If CONFIG_SPIFI_SECTOR512 undefined, lpc43_bwrite doesn't do actual write (probably copy/paste errors). Still not sure about current state of lpc43_spifi implementation, but for me NXFFS works with this patch. From Vytautas Lukenskas. 2016-07-14 10:11:19 -06:00
Pierre-noel Bouteville
76f12b1f69 I'm using syslog through ITM. In this case syslog_channel function is call before ram initialisation in stm32_clockconfig. But syslog channel uses a global variable that is reset to default by the RAM initialization. 2016-07-14 07:29:39 -06:00
Gregory Nutt
72582b61d9 Merged in ziggurat29/nuttx/stm32l4_smartfs_test (pull request #98) 
port foward bugfix from stm32 of oneshot timer
 2016-07-13 16:09:18 -06:00
ziggurat29
9a6c5b271a port foward bugfix from stm32 of oneshot timer 2016-07-13 17:00:06 -05:00
Gregory Nutt
37e10a54ae Kinetis: Eliminate a warning. Freedom-K64F: Update a README file 2016-07-13 15:38:47 -06:00
Gregory Nutt
beaca7a17f Merge remote-tracking branch 'origin/master' into timekeeping 2016-07-13 10:22:38 -06:00
Max Neklyudov
067f63fc18 STM32: Fix bug in oneshot timer 2016-07-13 10:20:38 -06:00
Stefan Kolb
f673b2d02a This commit solves a problem which causes data loss while sending data via USB. This problem is caused by an incorrect handling of the endpoint state in the USB driver sam_usbdevhs. This leads under some circumstances to situations in which an DMA transfer is setup while a previous DMA transfer is currently active. Amongst other things I introduced the new endpoint state USBHS_EPSTATE_SENDING_DMA for the fix. 
To reproduce the problem, I used a program which send as many data as possible via a CDC/ACM device and verified the received data on the PC.
 2016-07-13 10:09:14 -06:00
Gregory Nutt
a7d8279714 Kinetis and Freedom-K64F: Remove unused configuration variable; fix some compile issues; SDHC is now enabled in the nsh configuration (but does not work) 2016-07-13 09:56:02 -06:00
Gregory Nutt
2f12de6f28 Freedom-K64F: Add hooks for automounter; Change NSH configuration to use Windows 2016-07-13 09:23:57 -06:00
Sebastien Lorquet
590af73bd2 STM32L4 Serial: Remove some STM32Fxxx conditional logic; fix a link error resulting from an over-aggressive rename. 2016-07-13 07:10:09 -06:00
Gregory Nutt
76a0cccbb1 K6x Ethernet: Fix some conditional logic 2016-07-13 07:04:19 -06:00
Sebastien Lorquet
6be72272eb STM32L4: Apply the stm32l4 namespace and FAR qualifiers to the serial driver, also, indentation. 2016-07-12 17:18:46 -06:00
Gregory Nutt
dee77a5dd9 Kinetis Ethernet: Add support for CONFIG_NET_NOINTS 2016-07-12 16:17:35 -06:00
Gregory Nutt
10667bd38a Kinetis Ethernet and Freedcom-K64F: PHY address was wrong. Modified driver to try all PHY addresses and then only fail if the driver cannot find a usable PHY address. MDIO pin must have an internal pull-up on the Freedom-K64F. 2016-07-12 14:09:27 -06:00
Gregory Nutt
c8f053de92 Kinetis Ethernet: Add support for the KSZ8081 PHY 2016-07-12 09:59:08 -06:00
Gregory Nutt
38999dfe9d Fix two incorrectly named header files 2016-07-12 09:46:31 -06:00
Gregory Nutt
f816e7a69b Merged in slorquet/nuttx/pr_fixes (pull request #95) 
Pr_fixes
 2016-07-11 17:07:40 -06:00
Sebastien Lorquet
4172016667 revert changes made by greg 2016-07-12 01:04:15 +02:00
Sebastien Lorquet
5e12d6203e Cosmetic changes after PR 94 2016-07-12 00:57:18 +02:00
Gregory Nutt
9dd70ffbae Freedom K64F: Green and Blue LEDs reversed 2016-07-11 16:54:20 -06:00
Gregory Nutt
c80b627e8d Partial review of last PR 2016-07-11 16:28:54 -06:00
Sebastien Lorquet
749b54fbda PR fixes for oneshoot and freerun 2016-07-12 00:16:08 +02:00
Gregory Nutt
a48fb1e41c Merged in slorquet/nuttx/stm32l4_renames (pull request #94) 
stm32l4_renames
 2016-07-11 16:05:27 -06:00
Sebastien Lorquet
4f5d22c940 fix a typo 2016-07-12 00:03:38 +02:00
Sebastien Lorquet
3a873a44ef renames in USB OTG 2016-07-11 23:59:24 +02:00
Sebastien Lorquet
4dd020784a renames in tickless 2016-07-11 23:57:57 +02:00
Gregory Nutt
fb1855244e STM32 timer: Eliminate a warning 2016-07-11 13:13:17 -06:00
Sebastien Lorquet
ce09af0da7 Rename STM32L4 PWM routines. this WILL BREAK configs 2016-07-11 19:13:06 +02:00
Sebastien Lorquet
d347d7ce7e renames in oneshoot 2016-07-11 19:06:14 +02:00
Sebastien Lorquet
34a7b0ea8e Renames stm32_ -> stm32l4_ on old files and rtcc/basic timers 2016-07-11 19:05:09 +02:00
Gregory Nutt
246773faa7 Rename CONFIG_SCHED_TIMEKEEPING to CONFIG_CLOCK_TIMEKEEPING. That is a better compartmentalized name. 2016-07-11 06:54:02 -06:00
Max Neklyudov
8db29071da timekeeping: initial implementation 2016-07-10 16:14:25 -06:00
Wolfgang Reissnegger
d89e062c06 SAM3/4 I2C: Fix reversed logic in twi_startmessage(). 2016-07-09 06:51:07 -06:00
ziggurat29
ee55a0b9a3 update README.txt to reflect new implementation status 2016-07-08 17:33:38 -05:00
ziggurat29
af236d4784 STM32L4: add support for tickless OS, and incidentally timers, pwm, oneshot, free-running.... 2016-07-08 17:30:55 -05:00
ziggurat29
0207f6699a port and bit definitions for the various timers on the STM32L4. whew. 2016-07-08 17:26:40 -05:00
ziggurat29
106f87d9ed fix incorrect clock setup for LPTIM1 2016-07-08 16:37:44 -05:00
Gregory Nutt
7473d3f859 Trivial changes from review of PR 2016-07-08 08:03:44 -06:00
Gregory Nutt
75e2f37dd2 Merged in david_s5/nuttx (pull request #89) 
stm32_serial.c edited online with Bitbucket
 2016-07-08 06:40:24 -06:00
Gregory Nutt
591c099470 Merged in david_s5/nuttx/upstream_nucleo-144 (pull request #88) 
Upstream_nucleo 144
 2016-07-08 06:35:46 -06:00
David Sidrane
06036a5841 stm32_serial.c edited online with Bitbucket 2016-07-08 01:56:37 +00:00
David Sidrane
deb3e8143c STM32F7 - DMA working on SDMMC 2016-07-07 15:49:47 -10:00
David Sidrane
f8d3a872ee FIxed STM32F& DMA stm32_dmacapable 2016-07-07 15:49:21 -10:00
ziggurat29
42820c0938 update usb dev/host controller drivers to reflect new(ish) logging standards; augment device enpoint and fifo allocation #defines to do more sanity checking, and be automatically adaptive to size changes. Update README.txt to reflect current status of the implementation. 2016-07-07 13:54:35 -05:00
ziggurat29
7c428efa97 Merge branch 'master' into stm32l4_usb 
Conflicts:
	configs/stm32l476vg-disco/nsh/defconfig
 2016-07-07 12:27:20 -05:00
Gregory Nutt
c16500dfdb STM32 timer. More clean up: Add all function prototypes. Reorder functions to match ordering in operations structure. 2016-07-06 14:24:59 -06:00
Gregory Nutt
7c568f249a STM32: Various fixed to get a clean compile after integrating tickless mode. Mostly because patch came from an old version of NuttX. 2016-07-06 13:37:08 -06:00
Gregory Nutt
711f3318c5 STM32 timer: Reorganize to conform better with the NuttX coding style 2016-07-06 13:36:17 -06:00
Max Neklyudov
d8286a7f47 STM32: Add support for Tickless mode (two timer implementation) 2016-07-06 12:48:30 -06:00
Gregory Nutt
4d8213870c Freedom-K64F: Update Flash Clock divider. Flash clock must not exceed 24 Mhz 2016-07-06 12:11:26 -06:00
Gregory Nutt
c8d6707aaf Freedom-K64F: Increase MCU clock to 120MHz 2016-07-06 11:03:27 -06:00
Gregory Nutt
ba8e6083bf K64 pin mux fixes: No PIN_ALT1, use PIN_ANALOG. Remove GPIO pin mux definitions. 2016-07-02 13:22:11 -06:00
Gregory Nutt
f1d0214c61 K64 pinmap: Use uppercase to math k60 pin naming 2016-07-02 12:09:34 -06:00
Gregory Nutt
59de06f7f9 Update K64 pin multixplexing 2016-07-02 11:48:56 -06:00
Gregory Nutt
7a7998e4f9 Add support for the NXP Freedom-K64F board. This is primarily the work of Jordan Macintyre. I leveraged this code from https://github.com/jmacintyre/nuttx-k64f 2016-07-01 15:42:21 -06:00
Gregory Nutt
f73b97c3b2 arch/arm/kinetis: Completes moving register header files to kinetis/chip directory with all K64 changes. 2016-07-01 15:00:04 -06:00
Gregory Nutt
bccd2ec219 arch/arm/kinetis: Still moving register header files to kinetis/chip directory; still incorporating K64 differences. 2016-07-01 14:07:14 -06:00
Gregory Nutt
c8793637ee Add some conditional compilation to handle improper inclusion of header file 2016-07-01 13:24:31 -06:00
Gregory Nutt
4acd296926 arch/arm/kinetis: Still moving register header files to kinetis/chip directory; still incorporating K64 differences. 2016-07-01 13:15:29 -06:00
Gregory Nutt
4f64634694 arch/arm/kinetis: Still moving register header files to kinetis/chip directory; still incorporating K64 differences. 2016-07-01 12:36:09 -06:00
Gregory Nutt
62a9b10b3d arch/arm/kinetis: Still moving register header files to kinetis/chip directory; still incorporating K64 differences. 2016-07-01 11:55:15 -06:00
Gregory Nutt
91dd3306c8 arch/arm/src/kinetis: Add basic support for the K64 family. Still moving register definition files to the kinetis/chip subdirectory. 2016-07-01 11:24:41 -06:00
Gregory Nutt
71ff84b96a arch/arm/src/kinetis: Create a chip sub-directory as with other architectures. Start moving some headers... a lot more still be be moved. 2016-07-01 08:48:57 -06:00
Sebastien Lorquet
d329f117e7 Here is a missing register def for STM32L4 after support for dual RX. Thanks to Paul for porting the CAN improvements to both STM32 targets. 2016-06-30 07:11:26 -06:00
Paul A. Patience
20c611c12b STM32 CAN: Bitfield definitions should be unsigned 
Shifting 1 by 31 is undefined behaviour because 1 is signed.
We should probably use 1ul instead of 1 everywhere else,
but for now this silences a compiler warning.
 2016-06-29 13:59:33 -04:00
Paul A. Patience
52a4a20efb STM32L4 CAN: Port support for both RX FIFOs from STM32 CAN 2016-06-29 13:59:29 -04:00
Michael Spahlinger
329c760f17 SAMV7: CAN Message Filtering fixed 
- Bugfix: stdfilters didn't work because the filter was never enabled (wrong number of bits to shift)
 - Bugfix: Filters were never used because the configuration register cannot be written without using the initialization mode

Both bugs are fixed by this patch. Filtering has been tested with both standard and extended identifiers and is now working properly.
 2016-06-29 08:48:11 -06:00
Gregory Nutt
6aa067e929 Mostly costmetic changes from review of last PR 2016-06-29 07:33:30 -06:00
David Sidrane
e58b67b946 Added STM32F7 DBGMCU 2016-06-28 17:23:44 -10:00
David Sidrane
efb2850b5f STM32F7 BBSRAM fixed (and formated) flags 2016-06-28 16:28:52 -10:00
David Sidrane
eacd672ab0 STM32 BBSRAM fixed (and formated) flags 2016-06-28 16:25:04 -10:00
Gregory Nutt
8323e97201 Merged in david_s5/nuttx/upstream_nucleo-144 (pull request #82) 
Upstream_nucleo 144
 2016-06-28 16:56:14 -06:00
Gregory Nutt
c40c107e7a STM32 F4 RTC: Fix some long lines 2016-06-28 16:55:06 -06:00
David Sidrane
edca32f40c missing s 2016-06-28 12:44:17 -10:00
David Sidrane
35ca7eaf3a Removed STM32 porting vestiges 2016-06-28 12:43:39 -10:00
Gregory Nutt
2ed1295528 Cosmetic changes from review of last PR 2016-06-28 16:42:21 -06:00
Gregory Nutt
a0a082fc03 Merged in david_s5/nuttx/upstream_nucleo-144 (pull request #81) 
STMF7xxx RTC
 2016-06-28 16:26:31 -06:00
David Sidrane
0af47a93ae STMF7xxx RTC 
Remove proxy #defines
 Ensure the LSE(ON) etal are set and remembered in
  a) A cold start (RTC_MAGIC invalid) of the RTC
  b) A warm start (RTC_MAGIC valid) of the RTC but a clock change.

The change was needed because in bench testing a merge of the latest's STM32  53ec3ca (and friends) it became apparent that the
Sequence of operation is wrong in the reset of the Backup Domain in the RCC code.  PWR is required before the Backup Domain
can be futzed with. !!!This Code should be tested on STM32 and if needed rippled to the STM32 families
 2016-06-28 12:13:36 -10:00
Gregory Nutt
435f21225a Fix a warning about an unused label, errout: Use bool with true/false, not uint8_t with 1/0 2016-06-28 14:55:04 -06:00
Gregory Nutt
a43da4d107 STM32 CAN: Clone missing stm32_enterinitmode() and _exitinitmode() from STM32L4. Don't know if this is write but is needed to compile. 2016-06-28 14:35:49 -06:00
Gregory Nutt
93f49290a3 Eliminate a warning 2016-06-28 13:47:44 -06:00
Paul A. Patience
a4d5845887 efm32, lcp43, stm32, stm32l4: disable interrupts with NVIC_IRQ_CLEAR 2016-06-28 15:12:39 -04:00
David Sidrane
1c93e48a09 Removed STM32 porting vestiges 2016-06-28 07:13:22 -10:00
David Sidrane
e0b7708afb Fix warning 2016-06-28 07:10:11 -10:00
Gregory Nutt
c74269ced6 Significantly stylistic changes required after review of last PR 2016-06-28 09:37:21 -06:00
Gregory Nutt
725a16d033 Trivial fix to alignment 2016-06-28 09:10:32 -06:00
Gregory Nutt
0de3514af7 Merged in david_s5/nuttx/upstream_nucleo-144 (pull request #77) 
Upstream_nucleo 144
 2016-06-28 09:07:03 -06:00
Michael Spahlinger
ed1f3aec61 Fixed build of SAMV71-XULT/nsh. With the changes from 26f7b8c the build process of the default configuration did not succeed anymore. This is fixed by this commit. 2016-06-28 08:23:41 -06:00
David Sidrane
a4040759b0 Adding PWR, RTC, BBSRAM for stm32f7 2016-06-27 16:42:01 -10:00
David Sidrane
89a79e8ac0 Double faulting on Idle task with 0 stack 2016-06-27 15:56:21 -10:00
Gregory Nutt
d4408264ec STM32 CAN fixes need to be backported to STM32L4 as well 2016-06-27 15:18:45 -06:00
Gregory Nutt
8e26d4c8e0 STM32 CAN: More fixes for compilation errors due to blind leverage of STM32L4 CAN filter IOCTLs to STM32 2016-06-27 15:16:13 -06:00
David Sidrane
6c7ea4695a Syslog changes incoperated 2016-06-27 09:59:13 -10:00
David Sidrane
02b23358e5 Update Authors 2016-06-27 09:54:28 -10:00
Gregory Nutt
738510a52c Merged in david_s5/nuttx/upstream_nucleo-144 (pull request #75) 
Upstream_nucleo 144
 2016-06-27 12:30:53 -06:00
David Sidrane
047ea89c30 Fixed config for D1 only 2016-06-27 08:27:44 -10:00
Gregory Nutt
1b5bef5325 STM32 CAN: Fix an error when filter methods were ported from STM32L4 2016-06-27 11:15:37 -06:00
Gregory Nutt
82bb42aa93 Trivial changes from review of last PR 2016-06-27 07:43:32 -06:00
Lok Tep
1e67714c3f usb copy 2016-06-27 11:23:42 +02:00
Gregory Nutt
8643b59527 Merged in david_s5/nuttx/upstream_nucleo-144 (pull request #72) 
Upstream_nucleo 144
 2016-06-24 18:38:17 -06:00
David Sidrane
526e889c8e BUGFIX:PLLs IS2 and SAI P Calculation 2016-06-24 13:23:35 -10:00
David Sidrane
3e2a620f8c Fixed Undefined STM32_IRQ_NIRQS 2016-06-24 13:23:35 -10:00
David Sidrane
a31c35bd7b Fixed Missing number in stm32f76xx77xx PINMAP 2016-06-24 13:23:35 -10:00
David Sidrane
adf0e8d357 Clean up F7 SDMMC 2016-06-24 13:23:35 -10:00
ziggurat29
6c762faa0f updated to reflect changes in debug output macros/fxns 2016-06-24 17:48:08 -05:00
Gregory Nutt
39e7d5431f update gitignore 2016-06-24 16:29:15 -06:00
ziggurat29
b4e62547af resolve and Merge branch 'master' into stm32l4_usb 
resolved Conflicts:
	configs/stm32l476vg-disco/nsh/defconfig
 2016-06-24 14:54:20 -05:00
Michael Spahlinger
26f7b8c9e5 TWIHS Driver improved and GPIO-Driver fixed for Open-Drain Pins 
- sam_gpioread: Now the actual line level from the pin is read back.  This is extremely important for Open-Drain Pins, which can be used bidirectionally
 - Re-Implemented twi_reset-function and enhanced it so it can be called from inside the driver (see next point)
 - Glitch-Filter: Added a configuration option to enable the twi-built-in glitch filter
 - Added a "Single Master Mode": In EMC Testing the TWI-Bus got stuck because the TWI-Master detected a Multi-Master access (but there is no second master). With the option "Single Master" we detect these events and automatically trigger a twi_reset. We also do an automatic recovery if a slave got stuck (SDA stays low).

With the above changes I²C-Bus reliability in harsh environments (eg. EMC) is greatly improved.

The small change in the GPIO-Driver was necessary because otherwise you cannot read back the correct line status of Open-Drain Outputs and this is needed by the twi_reset function.
 2016-06-24 10:33:51 -06:00
Alexander Vasiljev
315e22e4df Correct auto-negotiation mode in the LPC43xx ethernet. 2016-06-24 10:09:36 -06:00
Gregory Nutt
ea8760eb19 Cosmetic changes from review of last PR 2016-06-24 07:20:04 -06:00
Sebastien Lorquet
d3441668ee Port STM32L4 CAN IOCTLs to STM32 2016-06-24 11:53:17 +02:00
Sebastien Lorquet
613e3b0b2c Fix a search/replace typo 2016-06-24 11:44:40 +02:00
Sebastien Lorquet
017670ac9d Re-rename the stm32l4 can driver functions 2016-06-24 11:40:59 +02:00
Sebastien Lorquet
6de8dba383 Preliminary rename of stm32 can driver functions 2016-06-24 11:29:31 +02:00
David Sidrane
0bf68df3c7 Missing memset def 2016-06-23 14:43:25 -10:00
Wolfgang Reissnegger
f4adb82fe7 [sam34][dacc] Bugfix: DACC_WPMR_WPKEY_MASK -> DACC_WPMR_WPKEY 2016-06-23 17:12:24 -07:00
Sebastien Lorquet
82d746ec35 STM32L4 CAN: Implementation of loopback IOCTLs 2016-06-22 10:02:20 -06:00
Sebastien Lorquet
8b922b1546 Enforce STM32L4 naming convention 2016-06-22 07:36:49 -06:00
Lok Tep
e75a549423 one more file 2016-06-22 11:21:46 +02:00
Lok Tep
e83f3cf18e merge 2016-06-22 11:17:33 +02:00
Lok Tep
e45231ea13 merge 2016-06-22 11:15:51 +02:00
Lok Tep
863e830c0d merge 2016-06-22 11:05:52 +02:00
Gregory Nutt
8f0c2cdd13 SYSLOG: Change configuration selections to assure that one and only one SYSLOG device can be selected. Also add a check to assure that it is appropriate to use up_putc as the low-level syslog device. Adds CONFIG_SYSLOG_CONSOLE and CONFIG_SYSLOG_SERIAL_CONSOLE. 2016-06-21 09:59:09 -06:00
Gregory Nutt
5118264e6c Rename CONFIG_SYSLOG_CONSOLE to CONFIG_CONSOLE_SYSLOG 2016-06-21 09:35:51 -06:00
Gregory Nutt
485aa6b231 SIM: Comment out skip scheduler debug output that can hang the simulation. 2016-06-21 08:59:01 -06:00
Gregory Nutt
62d8f839c7 SYSLOG: Now a two phase initialization. Some SYSLOG channels cannot be initialized until later in the bringup 2016-06-21 07:52:24 -06:00
Sebastien Lorquet
8b1a607671 Here is a patch to 
-remove a wrong comment in atmel mcan ioctl
-add ioctls to set/get bit timing in stm32l4
-add ioctl hooks to allow future management of can id filters.
 2016-06-21 06:21:54 -06:00
Gregory Nutt
7f16548f57 Replaces last three commits. Does the same thing, but does it in a way that does not change the usage model. 2016-06-21 05:26:08 -06:00
Gregory Nutt
bf0499aca3 Eliminate another warning 2016-06-20 22:58:39 -06:00
Gregory Nutt
c05da80a27 Eliminate a warning 2016-06-20 22:54:58 -06:00
Gregory Nutt
aed4d0e198 Missed a few *llinfo() to *info() conversions 2016-06-20 16:24:09 -06:00
Gregory Nutt
505ca542e8 Remove some last traces of lowvsyslog that were missed; Add a SYSLOG emergency channel for handling assertion output more cleanly 2016-06-20 16:11:50 -06:00
Gregory Nutt
2a751068e6 Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err(). 2016-06-20 12:44:38 -06:00
Gregory Nutt
43eb04bb8f Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
Gregory Nutt
d40a473f72 Without lowsyslog() *llwarn() is not useful. Eliminate and replace with *warn(). 2016-06-20 09:37:08 -06:00
Gregory Nutt
2b445ddccc Remove lowsyslog(). The new syslog() includes all of the functionality of lowsyslog(). No longer any need for two interfaces. 2016-06-20 08:57:08 -06:00
Gregory Nutt
8021354e01 ullinfo (vs ulinf) 2016-06-19 18:14:27 -06:00
Gregory Nutt
5b2aa7bf99 Remove all traces of CONFIG_SYSLOG 2016-06-19 13:59:43 -06:00
Gregory Nutt
9434d3e945 There is now one-and-only-one copy of syslog_putc. It is in the SYSLOG channel logic and can redirect syslog output as needed. All former syslog_putc versions were renamed and the corresponding SYSLOG device initializaiton now calls syslog_channel() 2016-06-19 13:03:20 -06:00