Gregory Nutt
d2799f0b4e
Update a README and some comments
2017-09-23 08:49:58 -06:00
Gregory Nutt
eff026aab8
drivers/usbdev: Cosmetic changes to CDC/ACM driver.
2017-09-22 15:19:43 -06:00
Gregory Nutt
5e38ad28f4
drivers/usbdev: Add support for RX flow control to the CDC/ACM driver.
2017-09-22 14:01:00 -06:00
Jussi Kivilinna
1604ae7ca7
drivers/pipes: pipe_common: fix writing large buffers not triggering POLLIN for reader poll
2017-09-22 06:03:08 -06:00
Gregory Nutt
ae2a1d07b3
Networking: drivers/net/loopback.c: Eliminate a warning. net/netdev/netdev_ifconfig.c: Was not returning all of the address info.
2017-09-19 15:00:46 -06:00
Alan Carvalho de Assis
dca62a68a8
Add driver for APA102 LED controller. These LEDs are used on LED Strips and are controlled over SPI.
2017-09-18 16:48:55 -06:00
Gregory Nutt
725aa4add8
Fix some typos in comments; Fix some bad spacing in fb.h
2017-09-18 09:03:26 -06:00
Gregory Nutt
882adb2c82
drivers/video/fb.c: Fix a typo introduced in previous commit.
2017-09-17 14:07:08 -06:00
Gregory Nutt
cfd44639b2
Fix some cosmetic stuff in the framebuffer character driver and in the LCD framebuffer driver front-end.
2017-09-17 13:48:10 -06:00
Gregory Nutt
0b8730fb8b
Squashed commit of the following:
...
configs/stm3210e-eval: Bring in new stm32_appinit.c, add board_initialize(), add support for FB character driver.
configs/stm3210e-eval: Rename stm32_appinit.c to stm32_bringup.c so that the start up logic is compatible with other, new boards.
2017-09-17 13:17:06 -06:00
Gregory Nutt
a9c054237a
drivers/lcd: Add suppose for a generic front-end that will convert any LCD driver into a framebuffer driver.
2017-09-17 10:39:23 -06:00
Gregory Nutt
b90b4d40b6
Fix typos/spelling. SAMV71-XULT: Update README, add support for fb_driver.
2017-09-17 10:38:34 -06:00
Gregory Nutt
b747192f20
Squashed commit of the following:
...
drivers/video: fb driver now clears framebuffer initially. Eliminates (or minimizes) initial garbage on the display.
configs/open1788: Initialization now follows the pattern of other boards. Add initialization of fb driver.
configs/open1788: Add a configuration for testing the framebuffer driver.
2017-09-16 12:49:16 -06:00
Anthony Merlino
046a94e363
Merged in merlin17/nuttx (pull request #485 )
...
drivers/xbee: Fixes a few warnings
* drivers/xbee: Fixes a few warnings
* configs/clicker2-stm32: Updates sections about i8sak usage in the README
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 19:41:24 +00:00
Anthony Merlino
22754053e8
Merged in merlin17/nuttx/xbee (pull request #484 )
...
drivers/wireless: Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface
* drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev
* configs/same70-xplained: Starts adding support for XBee radio
* drivers/wireless/ieee802154/xbee: More structuring of XBee driver
* drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2
* drivers/wireless/ieee802154/xbee: More XBee MAC code
* configs/clicker2-stm32: More work to add XBee radio support
* drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors
* configs/clicker2-stm32: Adjustments to XBee click module support
* drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields
* drivers/xbee: XBee network device now passes MAC events via IOCTL
* drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic
* configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic
* drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV
* drivers/xbee: Supports MAC RESET.request primitive
* drivers/xbee: Exposes generic AT query to the rest of driver
* drivers/xbee: Sets local values when writing setting change to Xbee device
* drivers/xbee: Finish association logic
* drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame
* drivers/xbee: Finishes transmit/receive logic
* drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c
* drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 14:37:55 +00:00
Anthony Merlino
9af6b7cdae
Squashed commit of the following:
...
Merged in merlin17/nuttx/mac802154-sock (pull request #479 )
wireless/ieee802154: Adds support for receiving MAC events via IOCTL through socket interface. Other small fixes and cleanup
* ioctl: Cleans up MAC802154IOC values
* wireless/ieee802154: Cleans up MAC802154IOC_NOTIFY_REGISTER logic in character driver
* wireless/ieee802154/mac802154_netdev: Adds support for MAC event notification via IOCTL
* wireless/ieee802154/mac802154: Changes reset logic. No longer reset extended address.
* wireless/ieee802154: Cleans up MAC802154IOC logic
Moves MAC802154IOC from ieee802154_ioctl.h and renames ieee802154_ioctl.h to ieee802154_device.h since it only contains types relevant to the MAC char device now.
* wireless/ieee802154/mac802154_device: Cleans up IOCTL logic for recent changes.
* drivers/wireless/ieee802154/mrf24j40: Adds missing break in case statement
* wireless/ieee802154/mac802154_netdev: Starts adding support for passing MAC events via IOCTL
* wireless/ieee802154/mac802154: Fixes issue with receiver enable logic
* wireless/ieee802154/mac802154: Fixes issue where extended address is cleared and not rewritten after radio reset
* configs/clicker2-stm32/mrf24j40-mac: Enables RAMLOG and wireless driver logging
* wireless/ieee802154/mac802154: Fixes poll logic meant to automatically choose address mode based on short address range.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 08:04:38 -06:00
Gregory Nutt
0f04816b37
Trivial changes from review of last PR.
2017-09-14 14:55:50 -06:00
Florian Olbrich
6f57d1d472
lis3dsh.c edited to obey the nuttx coding standard.
2017-09-14 20:29:41 +00:00
Florian Olbrich
b1e625eacb
Added initialization code and Kconfig entries to set up the LIS3DSH accelerometer
...
driver on STM32F4Discovery rev. C boards and attach the associated interrupt callback.
Added the argument parameter (FAR void *arg) to the interrupt handler provided by the LIS3DSH
driver to fit the definition for ISRs in xcpt_t.
Changed the check for working queue availability in lis3dsh interrupt handler to use work_available()
and not crash in case of an overrun.
2017-09-14 20:03:28 +02:00
Gregory Nutt
278532eb44
drivers/video/fb.c: File offset is in units of bytes, not pixels.
2017-09-14 08:43:41 -06:00
Gregory Nutt
9b2a8e8c0e
Rename CONFIG_AUDIO_DEVICES to CONFIG_DRIVERS_AUDIO to conform better to the evolving configuration naming standard.
2017-09-12 14:10:15 -06:00
Gregory Nutt
831ee3bb72
Rename CONFIG_VIDEO_DEVICES to CONFIG_DRIVERS_VIDEO to conform better to the evolving configuration naming standard.
2017-09-12 14:03:51 -06:00
Gregory Nutt
107866c00e
sim/configs/fb: Add a configuration for non-graphical testing of the frambuffer character driver using apps/example/fb
...
drivers/video/fb.c and include/nuttx/video.fb.h: Some improvements and fixes from early testing sith the sim/fb cnofiguration.
2017-09-12 09:48:47 -06:00
Gregory Nutt
d76a541a57
Trivial, cosmetic
2017-09-11 19:22:49 -06:00
Gregory Nutt
acfa706df3
drivers/video/fb.c: Remove some logic that is not currently used.
2017-09-11 17:55:04 -06:00
Gregory Nutt
f3fc9c0d03
drivers/video/fb.c: Add support for LCD drivers that use a simulated framebuffer and must receive explicit notification when there is an update to a region in the framebuffer.
2017-09-11 16:43:12 -06:00
Gregory Nutt
bf33f1d63e
Squashed commit of the following:
...
drivers/video/fb.c: Framebuffer driver is code complete but as of yet untested.
drivers/video/fb.c: Add framebuffer character device. This is basically only the framework for the driver; a lot of logic is still missing.
2017-09-11 16:26:18 -06:00
Gregory Nutt
7fbceacb46
Mark an untested driver as EXPERIMENTAL in its Kconfig; Update some comments.
2017-09-11 09:35:39 -06:00
Mateusz Szafoni
2ffc2ab875
Merged in raiden00/nuttx (pull request #480 )
...
Master
* smps.c: fix error messages
* stm32f33xxx_hrtim.h: fix definition
* stm32_hrtim: fix pclk calculation
* stm32_hrtim.c: cosmetics
* smps.h: cosmetics
* add upper-half driver for high power LED driver (powerled)
* stm32f334-disco: beginning of lower half driver for high power LED (powerled)
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-10 17:43:20 +00:00
Gregory Nutt
334d1734dc
6LoWPAN/Radio: Rename radio property sp_pktlen to sp_framelen. Add 6LoWPAN utility to get the max frame length (not yet hooked in)
2017-09-10 10:13:33 -06:00
Gregory Nutt
e7ce9c4a79
sem_open() should return SEM_FAILED on any failures. This is change change in the POSIX specification since the original sem_open() was written so many years ago.
2017-09-08 10:14:51 -06:00
Boris Astardzhiev
b1eceb838b
Extend the RTC framework with an alarm read ioctl (RTC_RD_ALARM). Through it consumer could get configuration settings about previously scheduled hardware alarms (active status, hours, minutes, seconds).
2017-09-03 08:39:02 -06:00
Mateusz Szafoni
daac3bd7f8
Merged in raiden00/nuttx (pull request #476 )
...
Master
* stm32_dac.c: fix compilation when DMA disabled for channel
* smps.h: update some comments
* smps.c: more sanity checks
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-02 19:52:21 +00:00
Jussi Kivilinna
03a3aca774
drivers/bch: add poll support
2017-09-01 07:54:49 -06:00
Gregory Nutt
8e6c78f425
Fix last commit. It violates the NuttX coding standard because it is not C89 compliant.
2017-08-30 13:44:13 -06:00
Oleg Evseev
18f4dcffa8
Eliminate unused variable warning.
2017-08-30 08:46:48 -06:00
Juha Niskanen
fa5a2035ff
drivers: analog: adc: add poll support
2017-08-28 07:05:33 -06:00
Mateusz Szafoni
ea35f31f73
Merged in raiden00/nuttx (pull request #469 )
...
Master
* stm32f0/Kconfig: remove references to HRTIM
* STM32F33: missing SYSCFG CFGR3 definitions
* stm32_hrtim.h: remove redundant definitions
* stm32_hrtim.c: fix DAC triggers configuration
* stm32_hritm.c: warning message when default value selected
* stm32_hrtim.c: missing master timer logic
* stm32_hrtim.c: add more assertions
* stm32_dac.c: fix conditional
* stm32_dac.c: conditional logic for timer triggering
* stm32_dac.c: fix TSEL configuration when HRTIM
* stm32_dac.c: unnecessary condition
* stm32_dac.c: DMA request remapping
* stm32_dac.c: fix commpilation errors
* stm32_dac.c: add DMA buffers initialization logic
* stm32_hrtim.c: enable DAC triggering
* analog/comp.c: fix compilation errors when poll disabled
* stm32_hrtim.c: remove doubled assertions
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-08-27 12:49:53 +00:00
Gregory Nutt
88a87f8e3f
6LoWPAN: The original, Contiki-based design used only a single buffer for reassemblying larger packets. This could be a problem issue for hub configurations which really need the capability concurrently reassemble multiple incoming streams concurrently. These was also a design issue in that the reassembly buffer could be corrupted by outgoing packets. The design was extended to support multiple reassembly buffers, each associated with the reassembly tag and source address. This assures that there can be be no corruption of the reassembly once it has started.
2017-08-26 10:00:47 -06:00
Juha Niskanen
cc1f7a63fa
power: add driver for TI bq2429x battery charger. TODO: Untested. Does not have poll() support.
2017-08-25 07:26:00 -06:00
Gregory Nutt
e341c74f06
drivers/audio: Fix naming of configurations to be compliant for vs1053 audio driver. One file was not saved before last commit.
2017-08-24 11:12:10 -06:00
Gregory Nutt
53ef64aae6
drivers/audio: Fix naming of configurations to be compliant for vs1053 audio driver.
2017-08-24 11:11:06 -06:00
Gregory Nutt
5129aeefd5
drivers/sensors: Fix remaining naming of configurations to be compliant for two more drivers.
2017-08-24 10:48:20 -06:00
Gregory Nutt
dc8f3778a9
drivers/sensors: Fix more naming of configurations to be compliant for two more drivers. Still a few more to go.
2017-08-24 10:26:53 -06:00
Gregory Nutt
1f023fa31a
drivers/sensors: Fix more naming of configurations to be compliant for two more drivers. Still a few more to go.
2017-08-24 10:10:00 -06:00
Gregory Nutt
269107afc8
drivers/sensors: Make naming configuration compliant for two more drivers. Still several to go.
2017-08-24 09:54:23 -06:00
Gregory Nutt
7f4af7b690
drivrs/sensors: Make a few other configuration settings consistent with the (undocumented) standard.
2017-08-24 09:45:46 -06:00
Gregory Nutt
5dd25bbfde
Missed two naming changes in last commit
2017-08-24 09:32:24 -06:00
Gregory Nutt
9e386e3b31
drivrs/sensors/hts221: Fix inconsistent configuration variable naming; Try to bring closer to an as-of-yet undocumented naming convention.
2017-08-24 09:22:36 -06:00
Anthony Merlino
fbf830aef2
drivers/wireless/spirit: Fixes a pre-processor directive
2017-08-22 21:15:22 -04:00
Jussi Kivilinna
a099506b1b
drivers/lcd: ssd1306: separate lcd_dev_s setup to separate object. g_oleddev takes 1 KiB because framebuffer and was allocated to .data section because of lcd_dev_s function pointer setup. Move lcd_dev_s setup out, so that g_oleddev goes to .bss and avoid wasting ROM.
2017-08-22 08:46:00 -06:00
ussi Kivilinna
89cc4741ac
drivers/lcd: ssd1306: fix memory corruption caused by ssd1306_getrun(). ssd1306_getrun was writing one extra byte (with value 0) past target buffer when pixlen is multiple of 8. When pixlen was not multiple of 8, last byte of buffer was fully cleared, instead of modifying only the (pixlen % 8) bits of last byte.
2017-08-22 08:42:40 -06:00
Jussi Kivilinna
3dfeb9e59f
drivers/lcd: ssd1306: add support for board power control. ThingseeOne has regulator for controlling display power on/off. Patch adds support for board based power control to SSD1306 driver.
2017-08-22 08:40:27 -06:00
Jussi Kivilinna
310a29227a
drivers/lcd: add DD-12864WO-4A/SSD1309 support to SSD1306 driver
2017-08-22 08:32:52 -06:00
Pekka Ervasti
cc0fea60ad
drivers: analog: comp: add poll support
2017-08-22 06:26:57 -06:00
Gregory Nutt
67befb9642
ENC28J60: Update interface to use newer parameter passing to interrupt handlers
2017-08-21 16:49:43 -06:00
Gregory Nutt
241c1433ef
ENCX24J600: Fix some warnings. Update interface to use newer parameter passing to interrupt handlers
2017-08-21 16:23:22 -06:00
Gregory Nutt
969d7c5814
Networking: Remove driver based backlog support. This affects the entire network, but is used by only one driver. The only supported with of supported RX backlog is via common read-ahead buffering.
2017-08-21 06:28:59 -06:00
Gregory Nutt
30c51a49a5
drivers/net/tun.c: Currently cannot support TAP mode unless Ethenet is enabled
2017-08-20 12:01:38 -06:00
Gregory Nutt
1334ab3d2a
IP forward: Correct some compile issues due to recent changes.
2017-08-20 11:46:43 -06:00
Gregory Nutt
6919fb85e4
6LoWPAN/PF_IEEE802154: Created radiodev.h and renamed various structures to provide a better separation between 6LoWPAN and PF_IEEE802154.
2017-08-20 07:10:48 -06:00
Gregory Nutt
cff4ac6845
Squashed commit of the following:
...
commit 2a3ab1652a2c95bcfc8be8380fc7cbdcb6472938
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Aug 19 08:44:31 2017 -0600
PF_IEEE802154: Finish some missing bind() logic. Add configs/sim configuration for testing.
commit 59be4b846a6e3bfe82087a888e3fdac9c3c414e5
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 19:30:04 2017 -0600
PF_IEEE802154: More renaming to decouple 6LoPAN from radios in general.
commit 69fabb1aea76e54381bdc13de28a3f1441fb42f4
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 19:21:11 2017 -0600
PF_IEEE802154: Missed a few renamings.
commit ff0af1bb25567720934cc1c2a721ccd92cc35f89
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 17:46:58 2017 -0600
PF_IEEE802154: A few bugfixes
commit 01c7c84afd00cf907d280d30cfaf0fb2cf90e02e
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 17:01:31 2017 -0600
PF_IEEE802154: A few bugfixes
commit dcef4056d1c1488c93151135f3b7106977faa903
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 16:31:05 2017 -0600
PF_IEEE802154: Bring in framework for sendto/recvfrom. Currently just a crude port of functions from net/pkt and do not provide the implemenation needed.
commit 68c5b7b6dd3ab7eb2d0c19890abb38e6561b140e
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 15:18:31 2017 -0600
Trivial fix to typo in comment
commit fd0af534c089569ccdbd59f13b85453de0a653ad
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 15:07:20 2017 -0600
PF_IEEE802154: Add device lookup logic; Rename some things that used to be used only by 6LoWPAN but now must be shared with PF_IEEE802154 and need more generic naming.
commit 4fc80a1659f1c699b050775cefc7f6b631b46114
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 13:49:54 2017 -0600
PF_IEEE802154: Add driver poll logic.
commit d83f71992df8764faa93f9425f1a7602a758f730
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 13:28:59 2017 -0600
PF_IEEE802154: Add frame input function.
commit 77561b8c4d5d7be1f8d8eb62cf1a07229afe2048
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 12:46:29 2017 -0600
PF_IEEE802154: Socket type should be SOCK_DGRAM. Hook in socket interface.
commit c0f90350282e9905d7f26a1b30f04cc6d6794648
Merge: 8b518abfd0 169c55e546
2017-08-19 08:48:52 -06:00
Alan Carvalho de Assis
1048a3b871
drivers/sensors/hc_sr04.c: Replace busy wait with semaphone. Using this solution we don't need 60ms delay.
2017-08-18 09:44:38 -06:00
Alan Carvalho de Assis
50e2e08742
drivers/sensors: Add support to HC-SR04 distance sensor
2017-08-17 18:52:54 -06:00
Gregory Nutt
a703ed76af
Clicker2: Configure EDBG SPI CS just to make that it is disabled
2017-08-15 18:21:10 -06:00
Gregory Nutt
8033f8ae5b
SAMv71-XULT: Fix MRF24J40 interrupt GPIO number.
2017-08-15 11:43:31 -06:00
Gregory Nutt
28637e644d
Eliminate warning of unused global variables in certain configurations.
2017-08-12 16:33:34 -06:00
Gregory Nutt
4fa6106b57
Fix some compile problems found in build testing.
2017-08-12 14:28:27 -06:00
Gregory Nutt
6c4405561a
Fix a few compile errors and warnings found in build testing
2017-08-12 10:27:55 -06:00
Gregory Nutt
7bb8943a9c
Fix IPv6 loopback driver that depended on the removed g_ipv6_allonesaddr. Noted by Masayuki Ishikawa
2017-08-09 06:59:55 -06:00
Gregory Nutt
aeb59383cf
Remove CONFIG_NET_MULTILINK. This increases code size by a little, but greatly reduces the complexity of the network code.
2017-08-08 15:26:09 -06:00
Gregory Nutt
bd7c84b23e
Remove CONFIG_NETDEV_MULTINIC. This increases code size by a little, but greatly reduces the complexity of the network code.
2017-08-08 14:24:12 -06:00
Gregory Nutt
f3f522514e
libm: Eliminate a warning from lgamma(); Update some comments; Add some logic to handle broadcast better -- Currently conditioned out because it does not work.
2017-08-08 12:08:43 -06:00
Gregory Nutt
09f31d1371
Spirit Radio: Add support for CSMA backoff count reached interrupt.
2017-08-08 10:34:51 -06:00
Gregory Nutt
79400ea960
B-L475-IOT01A: Enable UDP broadcast test in the spirit-starhub configuration.
2017-08-08 08:32:41 -06:00
Gregory Nutt
572cf51fa4
Networking: Rethink IPv6 all-nodes packet routing.
2017-08-08 07:48:07 -06:00
Gregory Nutt
6e3ced4111
Spirit: Make error handling for discarded packets match other RX failure interrupts.
2017-08-07 13:52:42 -06:00
Gregory Nutt
1ac4848686
Spirit bugfixes: Was hanging occasionally because there was not mechanism to restart the poll timer if poll was not performed because Spirit ws busy. Fixed by not checking if Spirit is busy. The TX poll can be performed asynchronouly while spirit is busy; any outgoing data will queued until Spirit is ready. Fixed handling of a timeout condition. Failure to transmition to the TX state would fail (timeout) if in a race condition Spirit already committed to the RX state. The driver needs to recover the state properly and avoid debug assertions in this event.
2017-08-07 09:22:16 -06:00
Gregory Nutt
e57a5755cc
TX timeout must also be cancelled on a TX error. TX timeout should check if we are waiting for a TXto complete. TX timeout was too short (short than the maximum number of retries).
2017-08-06 16:56:02 -06:00
Gregory Nutt
bbf1ad4ea6
Spirit network driver: TX timeout was never being cancelled! Also reviewed and cleaned up all error handling logic
2017-08-06 15:40:37 -06:00
Gregory Nutt
48a507c0b7
6LoWPAN: When obtaining the radio MAC address from the IP address, handle the special case of broadcast and multicast address.
2017-08-06 13:50:48 -06:00
Simon Piriou
b1f50490bd
MTD: Add driver for Macronix QuadSPI flash memory
2017-08-06 10:51:17 -06:00
Gregory Nutt
84001f79a0
Spirit Network Driver: Add support for watermark interrupts on RX FIFO. Reduce max packet length to avoid an errata.
2017-08-06 10:10:55 -06:00
Gregory Nutt
3b1e2ac4fd
Spirit network driver: Restructure threading to reduce locking. Still get a few RX FIFO errors.
2017-08-06 08:26:51 -06:00
Gregory Nutt
2947ca06c9
Avoid some harsh, inappropriate DEBUGASSERT's.
2017-08-05 12:32:31 -06:00
Gregory Nutt
a29a168086
Spirit + 6LoWPAN: In STAR configuration, Spirit must use a configured well known hub address. 6LoWPAN cannot assume that the PAN coordinator is the STAR hub; it must ask the radio to provide it with the address of the star hub
2017-08-05 09:13:29 -06:00
Gregory Nutt
c2fbef2062
b-l475e-iot01a: Add configurations to support a star topology.
2017-08-05 07:53:55 -06:00
Gregory Nutt
5d96385c52
Spirit: Increase number of retries if there is no acknowledgement; Add interrupt handling for the case where the max number of retries expires. Fix some badly implemented queue management code. With these changes the basic UDP and TCP tests work.
2017-08-04 15:20:10 -06:00
Gregory Nutt
8027d1bf18
Spirit: Enable AutoACK, TX retries, and RX timeouts in the network driver.
2017-08-04 13:16:07 -06:00
Gregory Nutt
0d551cd0ac
Spirit: Convert network driver to use STack packets vs. Basic packets. We need to use the STack packets in order to provide the source address.
2017-08-04 12:19:59 -06:00
Gregory Nutt
df51b69895
Spirit: Commit some trivial changes in preparation for a more substantial change.
2017-08-04 12:19:59 -06:00
Gregory Nutt
733d96cf81
Spirit: Correct setting of the length width field; Add multicast and broadcast addresses to radio properities.
2017-08-04 12:19:59 -06:00
Gregory Nutt
f6ebcc2220
Spirit network driver: Need to enable sending of TX address. Moved some non-optional settings out of board.h to driver.
2017-08-04 12:19:58 -06:00
Gregory Nutt
e8738e1f55
Minor update to some comments.
2017-08-04 09:00:58 -06:00
Gregory Nutt
bbc06dcd8e
RAMTRON: Should be able to select chunked write mode via a configuration option, not by editing the file.
2017-08-04 08:49:07 -06:00
Boris Astardzhiev
79ee0a5209
RAMTRON: Add support for splitting block writes in chunks. Some Re-RAMs like MB85AS4MT has a write buffer size limitation.
2017-08-04 08:12:59 -06:00
Jussi Kivilinna
9fc5f44ef6
syslog: CONFIG_CLOCK_MONOTONIC
2017-08-04 08:02:52 -06:00
Juha Niskanen
0113b0db95
drivers: handle I2C_TRANSFER return value consistently. Some I2C peripherals transfers return zero on success, others number of completed transfers. Make drivers robust against this.
2017-08-04 07:31:36 -06:00
Gregory Nutt
36e7a18181
spirit: Modify reg needs to toggle CS to get the correct status. Remove some delbug left in last commit. make sprit_unlock an inline function.
2017-08-03 15:15:15 -06:00
Gregory Nutt
d2b5078e01
Spirit: Mostly cosmetic fixes to names and comments. Tx timeout should run on the HP work queue.
2017-08-03 11:47:38 -06:00
Gregory Nutt
76c9ef4844
Spirit: Fix a few RX-related issues.
2017-08-03 11:08:33 -06:00
Gregory Nutt
b3e788e11b
Spirit: Fix typos in conditional compilation. Add debug output. Remove extra clear of pending interrupts, could cause missing interrupts. Add spirit_reg_modify() which is not currently used.
2017-08-03 09:55:30 -06:00
Gregory Nutt
8a785c4b66
Spirit Network Device: Fix a deadlock. Also several other design improvements to eliminate corner cases.
2017-08-03 08:37:05 -06:00
Gregory Nutt
1ae9748170
Networking: Add support for some packet radio IOCTL commands; Spirit: Fix a few bugs from testing.
2017-08-02 11:53:03 -06:00
Gregory Nutt
a6fa3b311d
b-l475e-iot91a: Add apps/examples/nettest and eamples/udp to Spirit1 configuration. Add telnet support. fix driver statistics configuration.
2017-08-02 07:01:42 -06:00
Gregory Nutt
1275c3e249
Spirit: Network driver needs to setup IP address based on configured node address. If no node address is provided, then it will use a default. Also upate a README.
2017-08-01 16:33:34 -06:00
Gregory Nutt
735095d040
Spiri: Fixe some typos. One is critical since it is conditional compilation.
2017-08-01 15:18:40 -06:00
Gregory Nutt
09bb6ff16b
Spirit: Add more debug output. Make sure device is in READY state after reset and before changing to STANDBY.
2017-08-01 13:48:59 -06:00
Gregory Nutt
ceca6c69a8
Spirit: Add a function to wait for a state change with a timeout.
2017-08-01 10:31:12 -06:00
Gregory Nutt
bd027b9019
serial.c: Use common TX drain logic when closing a driver as with the TCDRAIN IOCTL.
2017-08-01 10:14:24 -06:00
Gregory Nutt
2cb5ec542b
Spirit: Fix a bad debug assertion.
2017-08-01 09:01:46 -06:00
Gregory Nutt
4f0238339e
serial.c: Finish implementation of TCDRAIN. Based partly on logic from Sebastien Lorquet.
2017-08-01 07:39:08 -06:00
Sebastien Lorquet
e22912db37
drivers/serial/serial.c: Add support for TCFLUSH
2017-08-01 06:30:52 -06:00
Gregory Nutt
959f2042a4
IoT Board/Spirit: Fix a few issues that interfered with testing. Move console to the VCOM port (USART) for all configurations. Rename the spirit-mac configuration to spirit-6lowpan. Add lots of debug output the spirit network driver.
2017-07-31 18:26:17 -06:00
Gregory Nutt
1e24404dcc
Squashed commit of the following:
...
commit f97da3a546f9d6e1b858cfc45538a06b62396034
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 19:09:46 2017 -0600
Network: Condition out some types that depend on definitions that are only available with 6LoWPAN is enabled.
commit 312e9dc1195527100e12bf6be8b629f5b29be1f6
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 18:57:23 2017 -0600
6LoWPAN: Fix case where source and destination IP address were backward. Fix some compile issues when star topology support is enabled.
commit 3b0e71c5807194fbb006d0560bb2c98133055ba3
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 16:01:48 2017 -0600
6LoWPAN PktRadio: Finishes up all logic; Lots of misc changes from build testing.
commit cc118f8cb335e1c48354fd7112e20be57de50b68
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 12:41:18 2017 -0600
6LoWPAN: Remove explicate type struct ieee802154_frame_meta_s from derive interface methods. Replace with a opaque void * type so that other radio meta data structures may use the interfaces. Add a new radion interface to get properties of the radio. Spirit: Finish packet I/O interface with the network.
commit 1aa0a63e8341ca5f9f88c294f96d1740459146d4
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sun Jul 30 07:57:15 2017 -0600
6LoWPAN: Replace metadata input parameter type from struct ieee802154_data_ind_s to void*. This permits radios with different MAC metadata to interact with 6LoWPAN. Includes many changes to handle variable length radio addresses. No longer just short and exteneded; any length.
commit 46266ace61ae6246123873935436d864c7de31e0
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 17:50:42 2017 -0600
Spirit: Fix typos in SPI debug code.
commit 27c6b235f6a2d3b2f08da4920b224a40e9991f59
Merge: 7029dffd02 7f53e089175889ce65f538f79543dc47791442a0b458934ac4f287cc25d6598386ef90c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-30 19:11:23 -06:00
Gregory Nutt
7f53e08917
Squashed commit of the following:
...
commit 7029dffd02156bcbfa84262671c2ca766a117191
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 12:02:13 2017 -0600
6LoWPAN PktRadio: Add missing MetaData-related prototypes and initialization logic. Perform a major renaming to make room in the 6LoWPAN name space for packet radios.
commit e2012f7c1df14155c0bfd45d7f1cb3f71b259f48
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 10:16:23 2017 -0600
6LoWPAN PktRadio: Some initial changes to support raw packet radios without IEEE 802.15.4 with 6LoWPAN.
commit c6dbf9178539b7da75e492ffd1d1f93c9c326299
Merge: da782d6cdf 5889ce65f538f79543dc47791442a0b458934ac4f287cc25d6598386ef90c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-29 13:42:26 -06:00
Gregory Nutt
5889ce65f5
Squashed commit of the following:
...
commit da782d6cdff5980d71aaa2da5f9c28ab3438d085
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Jul 29 07:26:48 2017 -0600
Spirit: Completes port of the spirit radio library to NuttX.
commit 63f3595c47dca13952d28b518c7f0a8d6ae9037a
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 17:42:51 2017 -0600
Spirit: Bring in a couple ore more radio interface functions.
commit 692a27da396b7683749790923d8fa085091764f1
Merge: 27c0a6ec08 38f79543dc47791442a0b458934ac4f287cc25d6598386ef90c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-29 07:29:07 -06:00
Gregory Nutt
38f79543dc
Squashed commit of the following:
...
commit 27c0a6ec0813187f125922c81189a70cf04d83d4
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 15:47:27 2017 -0600
Spirit: Bring in a couple ore more radio interface functions.
commit 96657af2831487724723a60084831619257fd953
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 14:20:14 2017 -0600
Spirit: Bring in more radio interface functions.
commit 640d55399b54a019be68825668fca1446abd082f
Merge: 3fcf84a9a2 47791442a0b458934ac4f287cc25d6598386ef90c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-28 15:48:47 -06:00
Gregory Nutt
47791442a0
Squashed commit of the following:
...
commit 3fcf84a9a2673e1e1466ce5b114d7b73c257e515
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 12:00:31 2017 -0600
Spirit: Brings in the last of the PktCommon interfaces.
commit d26ebd901ba4ba84910e99b4e728b98c30fa4c0b
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 09:54:52 2017 -0600
Spirit: Add a few more PktCommon interfaces.
commit b5cb8041d50233a4abb8fb4d1dcef5428ae2c2b2
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 09:33:31 2017 -0600
libc/termios: Remember block comments before empty file sections.
commit 0fcab2c1c8c74442d40bd5e8c6af50a34f8a5821
Author: Sebastien Lorquet <sebastien@lorquet.fr>
Date: Fri Jul 28 09:31:00 2017 -0600
tcdrain implementation based on a new term ioctl
commit 797d4adf7d41068c671f0217d369b797b269de1a
Author: Stefan Kolb <Stefan.Kolb@avat.de>
Date: Fri Jul 28 09:19:04 2017 -0600
We discovered a problem with the samv7 mcan driver which results, under some circumstances, in a very high CPU load.
The problem occurs, and is easily reproducible, if the device is connected to a CAN network with a wrongly configured CAN speed (baud rate). In our tests we set the CAN speed of the device to 1000000 and the speed of the other CAN nodes to 500000. The device is restarted and sends a CANopen “bootup message” to the CAN network. This results in huge amount of errors messages on the CAN bus, probably because of the CAN feature for acknowledging error messages. The error messages can’t be read by the device because of the misconfigured CAN speed, instead the CAN chip reports lots of errors, which are reported to the application which uses the CAN driver (CONFIG_CAN_ERRORS is enabled).
The CAN errors are reported from the CAN chip via interrupts and thus the interrupt load is very high in this scenario. To fix the problem the driver now disables each RX error interrupt after it is occurred. The RX error interrupts are turned back on if at least one CAN message is received successfully.
commit e298f48e96d9e34017dcab8e4d87032862ae9322
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 09:06:26 2017 -0600
Spirit: Bring in PktStack interfaces.
commit 4a0f00a7058312dcf6ac392689b9f69112f613ec
Merge: 855cf97130 b458934ac4f287cc25d6598386ef90c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-28 12:01:05 -06:00
Gregory Nutt
ee4b69f0d3
Review of last PR. Fixes many coding standard problems.
2017-07-28 07:16:35 -06:00
Giorgio Groß
cf5440d60c
Merged in ordsen/nuttx/feature-ltc4151-driver (pull request #445 )
...
Add driver for LTC4151 current and voltage monitor
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-07-28 12:56:02 +00:00
Jeff
b6d5e7b9e1
Lightness correction for RGB LED driver
2017-07-28 06:54:38 -06:00
Jeff
7f8f833714
Lightness correction for RGB LED driver
2017-07-28 06:54:06 -06:00
Giorgio Groß
b55ec110f2
Add driver for LTC4151 current and voltage monitor
2017-07-28 13:05:56 +02:00
Gregory Nutt
b458934ac4
Squashed commit of the following:
...
commit 855cf9713052a851a1daeb3842db2edd6ff6f658
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 18:03:56 2017 -0600
Spirit Network Driver: Add some hooks that will eventually support address filtering.
commit 3b3fb24ea86cf8233b034871d5c550f47ab852e6
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 17:13:21 2017 -0600
Spirit: Add a PktStack header file.
commit 705e8fff6a21264ab751fb34c107cb109430ac89
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 15:00:03 2017 -0600
Spirit: Bring in last of timer interfaces.
commit f8984b2f82e165f5bba132d6b099222d1beb1fbd
Merge: cb79778a30 f287cc25d6598386ef90c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-27 18:04:35 -06:00
Gregory Nutt
f287cc25d6
Squashed commit of the following:
...
commit cb79778a3044ae97a1cc615dfa24099144f04bd0
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 11:46:31 2017 -0600
Spirit: Bring in last of QI interfaces.
commit 0245b330a33aa73531b82ae261b1312be9922e0f
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 10:14:34 2017 -0600
Spirit: Add general interfaces.
commit 121845a8f229ec2c88e5721da5512135f6624ee5
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Thu Jul 27 09:41:23 2017 -0600
Spirit: Bring in last of GPIO interfaces.
commit 279bfcc92bcd0cfa48c0ed7862fa2b75fbee99b8
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 17:09:19 2017 -0600
Spirit: Add some missing configuration options: Add register -level debug options.
commit 4be89324a5908e35afc70373c279f4d05f62b48f
Merge: 66e87f9bb3 598386ef90c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-27 11:56:26 -06:00
Gregory Nutt
e75e3eb807
drivers/analog: Fix some data alignment issues in the ADC driver.
2017-07-27 08:09:21 -06:00
Jeff
552ed255f6
Add support for inverted LEDS. See common anode RGB LED discussion in the Yahoo group
2017-07-27 07:43:59 -06:00
Gregory Nutt
598386ef90
Squashed commit of the following:
...
commit 66e87f9bb3ef75fddf25400bc08475c5e6ad4c30
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 15:19:56 2017 -0600
Spirit: Brings in last of PktBasic logic.
commit 8b4c89d6a103003fa04363e2c2ae7b9ee390bf49
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 11:55:50 2017 -0600
Spirit: Bring in AES and MBUS logic.
commit d00022d39ab0ce839de29386949481e5c24feff3
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 09:22:03 2017 -0600
Spirit: Bring in remainder of calibration interfaces.
commit 40b4b2f902e04293f8940551a97a9a24a48988dd
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 08:44:32 2017 -0600
Spirit: Bring in DirectRF interfaces.
commit 7c109608e1a2989f3edbc2fd939a2d225fff382a
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Wed Jul 26 07:46:19 2017 -0600
Spirit: Add CSMA support.
commit 0f88896595d162c4ac6138e7b1af2fc35c865b3d
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 18:57:43 2017 -0600
Spirit: Add some initial TX logic to network driver.
commit 4dc7058dfcdcf40980578680b7e1a4206dea4ea2
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 17:02:11 2017 -0600
Spirit: Completes ports of spirit_management.* files
commit c904eef51d929e041b87d0c8aff6fa3c2f895341
Merge: 91e985a877 c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-26 15:35:42 -06:00
Gregory Nutt
c9ff8cbab9
Squashed commit of the following:
...
commit 91e985a87729017a66d19276c4d47681064f95ea
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 15:13:54 2017 -0600
Spirit: Add a few more functions that will soon be needed for packet transmission.
commit b5981d29983907c2194fbc26af4b72ad532bee78
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 13:30:07 2017 -0600
Spirit: Finish off some initialization issues; Started some interrupt handling logic.
commit c21073e0bc2870b3d9ba40bdfdfd5151ce4f5890
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 09:35:52 2017 -0600
Spirit: Completes very basic radio initialization for network driver
commit 1b544334361c54f46bcf0ba313c125932e8dafc6
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Jul 25 07:58:30 2017 -0600
Spirit: Add more radio initialization logic... getting closer.
commit 45d1047db60843c57d394ec910c63e7c127671e0
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 19:15:33 2017 -0600
Spirit: add some CSMA initialization logic
commit bcf55c71336d48947fe19bb09a799169852301c2
Merge: 89e9d426e9 2fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-25 15:14:35 -06:00
Gregory Nutt
2fc0fbcf7e
Squashed commit of the following:
...
commit 89e9d426e91c056e659fccf5e5c4392618f8f777
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 16:44:19 2017 -0600
Update some comments
commit 9c5d8a5833350006ed389e898b11c8c8a20e5f4f
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 16:15:54 2017 -0600
Spirit: Rename drivers/wireless/spirit/src to lib. Move Spirit network driver out of IEEE802.15.4 into drivers/wireless/spirit/drivers
commit cabc0ec9e6eb558dcb715ab17264383aa0105e7a
Merge: 87b616414a 6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-24 16:46:30 -06:00
Gregory Nutt
6bd744c4b3
Fix some minor issues in drivers/net/skeleton.c
2017-07-24 15:38:13 -06:00
Gregory Nutt
4be064d19a
Move SMPS driver to drivers/power (and header to include/nuttx/power). Rename debug to IOCTLs to more general power naming; create a separate file to coordinate power-related IOCTL commands.
2017-07-23 07:35:09 -06:00
raiden00pl
87ca3d1521
Merge remote-tracking branch 'upstream/master'
2017-07-23 11:37:24 +02:00
raiden00pl
a880f78f57
add generic upper-half driver for SMPS
2017-07-23 11:36:18 +02:00
Gregory Nutt
49d78f7b55
ADC: Some trivial coding standard changes.
2017-07-22 16:59:46 -06:00
Gregory Nutt
e4c0b889d7
Cosmetic fix to some spacing
2017-07-21 07:52:07 -06:00
Gregory Nutt
2bb3ad2e98
USB MSC: Add missing logic to define endpoints. The composite changes broke the the non-composite, USB MSC only case because it omitted the critical setup when USB MSC was not part of the composite.
2017-07-20 10:07:53 -06:00
Gregory Nutt
ee0c035a6d
USB device: Rename usbdev_description_s to usbdev_devinfo_s to avoid any more confusion of naming with device descriptions in the future. Instances of usbdev_devinfo_s are now called devinfo vs devdesc when is a bad naming collision.
2017-07-20 09:34:48 -06:00
Gregory Nutt
42efcbe3a9
Merge remote-tracking branch 'origin/master' into beacon802154
2017-07-20 08:04:41 -06:00
Gregory Nutt
951017da55
CDC/ACM: Part of previous change was incorret.
2017-07-19 09:11:13 -06:00
Gregory Nutt
940b78cac2
USB device: Fix some coding standard issues. Other purely cosmetic changes.
2017-07-19 09:00:01 -06:00
Gregory Nutt
646b28223a
CDC/ACM. Fix several known problems resulting from merge of USB composite device. That merge now breaks some of the non-composite USB devices. These fixes are for CDC/ACM.
2017-07-19 07:05:23 -06:00
Anthony Merlino
c13bd23ed9
drivers/mrf24j40: Trivial whitespace fix
2017-07-16 23:51:24 -04:00
Anthony Merlino
8610723ee6
ieee802154: Adds some wlinfo logs for debugging
2017-07-16 23:51:24 -04:00
Anthony Merlino
acc1ecd9a9
drivers/mrf24j40: Fixes math error for calculating sleep count values
2017-07-16 23:51:24 -04:00
Gregory Nutt
2f01b92fe2
Merge remote-tracking branch 'origin/master' into beacon802154
2017-07-16 08:58:39 -06:00
Frank Benkert
eacb4f0e84
Squashed commit of the following:
...
commit 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
2017-07-16 08:43:17 -06:00
Anthony Merlino
bd821dafcb
drivers/mrf24j40: Fixes line endings in file
2017-07-13 03:23:19 -04:00
Anthony Merlino
350776eca3
drivers/mrf24j40: Fixes issues with sleeping for beacon enabled networking
2017-07-13 03:18:22 -04:00
