sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
52,423 Commits 1 Branch 0 Tags 291 MiB
b413a1f4f7
Commit Graph

22 Commits

Author SHA1 Message Date
Zhe Weng
2b9633e652 net: Support multiple IPv6 address per netdev 
Note that user-space related code, like procfs and lifreq related ioctl commands, are not touched in this commit.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
 2023-11-07 19:30:36 +08:00
liqinhui
3f08f32486 net: allow icmpv6 and udp to find the dev by the ifindex with s_boundto. 
In order to support the dhcpv6c.

Signed-off-by: liqinhui <liqinhui@xiaomi.com>
 2023-10-11 23:34:01 +08:00
chao an
7d1763a57c net/assert: remove all unnecessary check for psock/conn 
Since inet/socket layer already contains sanity checks, so remove unnecessary lower half checks

Signed-off-by: chao an <anchao@xiaomi.com>
 2023-08-30 20:36:49 +08:00
Zhe Weng
d98bfc3e49 net/icmpv6: Fix icmpv6_neighbor for link-local address 
The netdev of link-local address cannot be auto decided, and the link-local address should always be reguarded as address on local network.

The problem we met:
When using `icmpv6_autoconfig` with multiple netdev, the `icmpv6_neighbor` may take out wrong netdev with ip address already set, then it may send solicitation with wrong address (`dev->d_ipv6draddr`) on wrong device, and regard the link-local address as conflict (because `dev->d_ipv6draddr` exists on this network).

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
 2023-08-11 02:00:39 +08:00
zhanghongyu
35dee8fdd2 icmpv6: add SOCK_RAW type support 
The third-party library we are porting will send and receive ICMPV6 messages
(router_advert / router_solicit / neighbor_advert / neighbor_solicit etc.)
from the user mode itself, so we added the SOCK_RAW related implementation
for ICMPV6.

Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
 2023-05-07 22:43:10 +08:00
梁超众
5012195bde support ipv4 ToS and ipv6 TrafficClass 
Signed-off-by: 梁超众 <liangchaozhong@xiaomi.com>
 2023-01-29 13:43:44 +08:00
luojun1234
ff3733b5b5 Support fragmentation and reassembly 
Signed-off-by: luojun1 <luojun1@xiaomi.com>
 2023-01-17 14:01:37 +08:00
Xiang Xiao
a851ad84c3 net: consistent the net sem wait naming conversion 
to prepare the new mutex wait function

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2023-01-15 12:31:30 -03:00
chao an
0cbbbb9215 net/devif: reuse devif_send() for can/pkt/icmp stack 
Signed-off-by: chao an <anchao@xiaomi.com>
 2023-01-13 16:41:10 +08:00
Zhe Weng
6222ad5764 Revert "net: downgrade iob priority of input/udp/icmp to avoid blocking devif" 
This reverts commit d87620abc9.
 2023-01-12 01:56:18 +08:00
Zhe Weng
d87620abc9 net: downgrade iob priority of input/udp/icmp to avoid blocking devif 
When trying to use iperf2, we found it comsumes all the IOB when sending UDP packets, then devif_poll has no IOB to send the packet out, so speed drops to 0 and never recovers.

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
 2023-01-05 22:25:19 +08:00
chao an
34d2cde8a8 net/l2/l3/l4: add support of iob offload 
1. Add new config CONFIG_NET_LL_GUARDSIZE to isolation of l2 stack,
   which will benefit l3(IP) layer for multi-MAC(l2) implementation,
   especially in some NICs such as celluler net driver.

new configuration options: CONFIG_NET_LL_GUARDSIZE

CONFIG_NET_LL_GUARDSIZE will reserved l2 buffer header size of
network buffer to isolate the L2/L3 (MAC/IP) data on network layer,
which will be beneficial to L3 network layer protocol transparent
transmission and forwarding

------------------------------------------------------------
Layout of frist iob entry:

        iob_data (aligned by CONFIG_IOB_ALIGNMENT)
            |
            |                  io_offset(CONFIG_NET_LL_GUARDSIZE)
            |                                |
            -------------------------------------------------
      iob   |            Reserved            |    io_len    |
            -------------------------------------------------

-------------------------------------------------------------
Layout of different NICs implementation:

        iob_data (aligned by CONFIG_IOB_ALIGNMENT)
            |
            |                 io_offset(CONFIG_NET_LL_GUARDSIZE)
            |                                |
            -------------------------------------------------
 Ethernet   |       Reserved    | ETH_HDRLEN |    io_len    |
            ---------------------------------|---------------
 8021Q      |   Reserved  | ETH_8021Q_HDRLEN |    io_len    |
            ---------------------------------|---------------
 ipforward  |            Reserved            |    io_len    |
            -------------------------------------------------

--------------------------------------------------------------------

2. Support iob offload to l2 driver to avoid unnecessary memory copy

Support send/receive iob vectors directly between the NICs and l3/l4
stack to avoid unnecessary memory copies, especially on hardware that
supports Scatter/gather, which can greatly improve performance.

new interface to support iob offload:

  ------------------------------------------
  |    IOB version     |     original      |
  |----------------------------------------|
  |  devif_iob_poll()  |   devif_poll()    |
  |       ...          |       ...         |
  ------------------------------------------

--------------------------------------------------------------------

1> NIC hardware support Scatter/gather transfer

TX:

                tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
                           /              \
                          /                \
devif_poll_[l3|l4]_connections()     devif_iob_send() (nocopy:udp/icmp/...)
           /                                   \      (copy:tcp)
          /                                     \
  devif_iob_poll("NIC"_txpoll)                callback() // "NIC"_txpoll
                                                  |
                            dev->d_iob:           |
                                                ---------------         ---------------
                             io_data       iob1 |  |          |    iob3 |  |          |
                                    \           ---------------         ---------------
                                  ---------------  |       --------------- |
                             iob0 |  |          |  |  iob2 |  |          | |
                                  ---------------  |       --------------- |
                                     \             |          /           /
                                        \          |       /           /
                                   ----------------------------------------------
                    NICs io vector |    |    |    |    |    |    |    |    |    |
                                   ----------------------------------------------

RX:

  [tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
                    |
                    |
      [tcp|udp|icmp|...]_ipv[4|6]_in()/...
                    |
                    |
          pkt/ipv[4/6]_input()/...
                    |
                    |
     NICs io vector receive(iov_base to each iobs)

--------------------------------------------------------------------

2> CONFIG_IOB_BUFSIZE is greater than MTU:

TX:

"(CONFIG_IOB_BUFSIZE) > (MAX_NETDEV_PKTSIZE + CONFIG_NET_GUARDSIZE + CONFIG_NET_LL_GUARDSIZE)"

                tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
                           /              \
                          /                \
devif_poll_[l3|l4]_connections()     devif_iob_send() (nocopy:udp/icmp/...)
           /                                   \      (copy:tcp)
          /                                     \
  devif_iob_poll("NIC"_txpoll)                callback() // "NIC"_txpoll
                                                  |
                                             "NIC"_send()
                          (dev->d_iob->io_data[CONFIG_NET_LL_GUARDSIZE - NET_LL_HDRLEN(dev)])

RX:

  [tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
                    |
                    |
      [tcp|udp|icmp|...]_ipv[4|6]_in()/...
                    |
                    |
          pkt/ipv[4/6]_input()/...
                    |
                    |
     NICs io vector receive(iov_base to io_data)

--------------------------------------------------------------------

3> Compatible with all old flat buffer NICs

TX:
                tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
                           /              \
                          /                \
devif_poll_[l3|l4]_connections()     devif_iob_send() (nocopy:udp/icmp/...)
           /                                   \      (copy:tcp)
          /                                     \
  devif_iob_poll(devif_poll_callback())  devif_poll_callback() /* new interface, gather iobs to flat buffer */
       /                                           \
      /                                             \
 devif_poll("NIC"_txpoll)                     "NIC"_send()(dev->d_buf)

RX:

  [tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
                    |
                    |
      [tcp|udp|icmp|...]_ipv[4|6]_in()/...
                    |
                    |
               netdev_input()  /* new interface, Scatter/gather flat/iob buffer */
                    |
                    |
          pkt/ipv[4|6]_input()/...
                    |
                    |
    NICs io vector receive(Orignal flat buffer)

3. Iperf passthrough on NuttX simulator:

  -------------------------------------------------
  |  Protocol      | Server | Client |            |
  |-----------------------------------------------|
  |  TCP           |  813   |   834  |  Mbits/sec |
  |  TCP(Offload)  | 1720   |  1100  |  Mbits/sec |
  |  UDP           |   22   |   757  |  Mbits/sec |
  |  UDP(Offload)  |   25   |  1250  |  Mbits/sec |
  -------------------------------------------------

Signed-off-by: chao an <anchao@xiaomi.com>
 2022-12-03 11:47:04 +08:00
liyi
391b501639 net: extract l3 header build code into new functions 
Signed-off-by: liyi <liyi25@xiaomi.com>
 2022-11-29 18:36:15 +08:00
chao an
873023f89b net/icmp[v6]: destroy nxsem properly 
Signed-off-by: chao an <anchao@xiaomi.com>
 2022-11-21 01:15:48 +08:00
chao an
a8d3286258 net: move device buffer define to common header 
Signed-off-by: chao an <anchao@xiaomi.com>
 2022-10-28 00:32:16 -04:00
anjiahao
5724c6b2e4 sem:remove sem default protocl 
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
 2022-10-22 14:50:48 +08:00
chao.an
162fcd10ca net: cleanup pvconn reference to avoid confuse 
More reference:
https://github.com/apache/incubator-nuttx/pull/5252
https://github.com/apache/incubator-nuttx/pull/5434

Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-08-26 20:58:11 +08:00
Xiang Xiao
ba9486de4a iob: Remove iob_user_e enum and related code 
since it is impossible to track producer and consumer
correctly if TCP/IP stack pass IOB directly to netdev

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-08-15 08:41:20 +03:00
Xiang Xiao
abc72ad128 net: Ensure sendmsg and sendfile return -EAGAIN in case of timeout 
instead of -ETIMEOUT, as specify here:
https://pubs.opengroup.org/onlinepubs/009604599/functions/sendmsg.html
https://man7.org/linux/man-pages/man2/sendfile.2.html

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2022-06-28 06:19:13 +03:00
chao.an
3fce144aeb net/inet: move recv/send timeout into socket_conn_s 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2022-02-10 15:04:33 -03:00
Petro Karashchenko
08043fb5bc net: unify FAR keyword usage for all net buffer memory mapped buffers 
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
 2022-01-20 01:42:56 +08:00
Peter Bee
e223f60c09 net/socket: move si_send/recv into sendmsg/recvmsg 
Implement si_send/sendto/recvfrom with si_sendmsg/recvmsg, instead of
the other way round.

Change-Id: I7b858556996e0862df22807a6edf6d7cfe6518fc
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
 2021-03-05 04:46:13 -08:00