Gregory Nutt
|
4f72c3b430
|
SAM4E UDP: Fix errors associated with OUT packet size handling and bank interrupt bit handling
|
2014-03-19 18:02:57 -06:00 |
|
Gregory Nutt
|
f3ce9ea2aa
|
SAM4E: Fix handling of CSR:DIR bit
|
2014-03-19 13:34:15 -06:00 |
|
Gregory Nutt
|
01f71c9cbc
|
SAM4E UDP: Fix to handling of FADDR:FEN and CSR:TXCOMP
|
2014-03-19 12:20:42 -06:00 |
|
Gregory Nutt
|
57516a8ede
|
LPC17 USB Host: Minor clean-up after performing some regressin testing
|
2014-03-19 08:33:15 -06:00 |
|
Gregory Nutt
|
34467249b5
|
Improved description of CONFIG_ARMV7M_USEBASEPRI from Vijay Kumar
|
2014-03-19 07:16:44 -06:00 |
|
Gregory Nutt
|
cba9127a86
|
SAM4E UDP: Fix FIFO reset logic
|
2014-03-18 17:24:50 -06:00 |
|
Gregory Nutt
|
3da4e2fc4f
|
SAM4E UDP: Remove spurious clearing of RXSETUP
|
2014-03-18 15:19:45 -06:00 |
|
Gregory Nutt
|
4b11d57f20
|
SAM4E UDP: Now receives one setup packet before dying
|
2014-03-18 12:38:34 -06:00 |
|
Gregory Nutt
|
a5bdccebe3
|
TM4C123G Launchpad: Corrected processor configuration from Daniel Pereira de Carvalho
|
2014-03-18 11:21:31 -06:00 |
|
Gregory Nutt
|
5f8304415d
|
SAM4E: Fix a few more UDP bring-up bugs. Still not working
|
2014-03-18 11:00:20 -06:00 |
|
Gregory Nutt
|
fe9023752a
|
SAM4E: Revise board-specific USB MSC support
|
2014-03-18 09:31:02 -06:00 |
|
Gregory Nutt
|
e869de4272
|
SAM4E: Add USB full speed device (UDP) driver
|
2014-03-17 12:37:55 -06:00 |
|
Gregory Nutt
|
1cde363251
|
SAM3/4: Fleshing out environment to support USB device (UDP)
|
2014-03-16 14:11:22 -06:00 |
|
Gregory Nutt
|
bda62b0502
|
SAM3/4: Fix debug logic in DMAC that was causing the loss of interrupts
|
2014-03-14 11:57:42 -06:00 |
|
Gregory Nutt
|
e2ab7d8a33
|
SAM3/4 DMA fixes in general for SPI DMA in particular
|
2014-03-14 11:25:16 -06:00 |
|
Gregory Nutt
|
dba6cca886
|
SAM3/4: Integrate the SPI DMA interface with the existing code. Does not yet work.
|
2014-03-13 15:54:09 -06:00 |
|
Gregory Nutt
|
42e06fb503
|
SAM4E-EK: Add support for the SAM4E-EK AT25 serial flash
|
2014-03-13 14:07:35 -06:00 |
|
Gregory Nutt
|
7e16cee6b5
|
Backport SPI driver enhancements from SAMA5 to SAM3/4
|
2014-03-13 10:34:35 -06:00 |
|
Gregory Nutt
|
0bd5f23a30
|
SAM4E: Fix EMAC pin configuration. Driver is basically functionaly now. SAM4E-EK NSH configuration now has networking enabled by default
|
2014-03-13 09:03:03 -06:00 |
|
Gregory Nutt
|
1a2845a4ef
|
SAM4E-EK: Add an EMAC driver. Initial commit is just a quick port of the SAMA5D3 EMAC driver
|
2014-03-12 15:03:59 -06:00 |
|
Gregory Nutt
|
5a0100aef4
|
SAM4E: Add support for the Cortex-M Cache Control block
|
2014-03-12 12:38:39 -06:00 |
|
Gregory Nutt
|
ce82132ef1
|
SAM4E: Various bring-up fixes. NSH now works
|
2014-03-12 10:59:19 -06:00 |
|
Gregory Nutt
|
3bb6c2fd57
|
TM4C: Fix typos in memory map reported by Daniel Pereira de Carvalho
|
2014-03-12 07:23:58 -06:00 |
|
Gregory Nutt
|
875b985781
|
SAM4E-EK: Purely cosmetic updates
|
2014-03-11 10:44:00 -06:00 |
|
Gregory Nutt
|
99d2f3a993
|
SAM4E-EK: Add basic board support
|
2014-03-10 15:18:46 -06:00 |
|
Gregory Nutt
|
6700b5318c
|
TM4C: A few more changes to get a clean compilation
|
2014-03-10 11:54:20 -06:00 |
|
Gregory Nutt
|
c05ad5ef63
|
Make sure that every reference to LM4F has corresponding logic for TM4C
|
2014-03-10 11:23:50 -06:00 |
|
Gregory Nutt
|
51674e0c51
|
TM4C: Add SYSCONTROL register defintion header file
|
2014-03-10 10:17:37 -06:00 |
|
Gregory Nutt
|
e788f48e19
|
Add support for TM4C GPIOs
|
2014-03-10 08:12:35 -06:00 |
|
Gregory Nutt
|
59b5802882
|
TIVA: Add memory map for the TM4C123
|
2014-03-09 13:57:35 -06:00 |
|
Gregory Nutt
|
cce52d75ed
|
Add pin multiplex definitions for the TM4C123
|
2014-03-09 13:15:09 -06:00 |
|
Gregory Nutt
|
983c0a2189
|
TM4C: Add definitions for GPIO interrupts
|
2014-03-09 10:00:31 -06:00 |
|
Gregory Nutt
|
096dbf391f
|
Add TM4C123 to the configuration system
|
2014-03-09 09:40:48 -06:00 |
|
Gregory Nutt
|
6811ad9eee
|
Oop.. everything was named TM3C instead of TM4C in the last check-in
|
2014-03-09 09:26:29 -06:00 |
|
Gregory Nutt
|
81eb11e68a
|
TM3C123: Add chip characteristics and interrupt definition files
|
2014-03-09 09:21:06 -06:00 |
|
Gregory Nutt
|
05ea680194
|
Hmmm.. not sure what happened but here is a missing TIVA file
|
2014-03-08 16:33:56 -06:00 |
|
Gregory Nutt
|
41a5b67887
|
functions and definitions renamed from lm_ to tiva_
|
2014-03-08 15:50:26 -06:00 |
|
Gregory Nutt
|
7c55ba4115
|
All files and functions beginning with lm_ changed to tiva_
|
2014-03-08 13:29:09 -06:00 |
|
Gregory Nutt
|
32f8f33653
|
The old lm/ directories were enamed tiva/ to better support new products coming down the pipe from TI
|
2014-03-08 12:31:06 -06:00 |
|
Gregory Nutt
|
441c311a3c
|
LPC2378: SPI driver from Lizhuoyi
|
2014-03-08 11:37:50 -06:00 |
|
Gregory Nutt
|
7231b0b1e5
|
LPC2378: I2C driver from Lizhuoyi
|
2014-03-08 11:03:58 -06:00 |
|
Gregory Nutt
|
95038604f6
|
Fix some confusion in the code about vectored interrupts; fix so that it builds with prioritized interrutps disabed
|
2014-03-08 10:57:11 -06:00 |
|
Gregory Nutt
|
c86c40f4e4
|
QEMU i486: Minor updates to VGA driver
|
2014-03-08 10:56:19 -06:00 |
|
Gregory Nutt
|
088798ec98
|
QEMU i486: New QEMU keyboard and VGA drivers from Lizhuoyi
|
2014-03-08 09:24:46 -06:00 |
|
Gregory Nutt
|
6dd1217bf9
|
QEMU i486: New QEMU keyboard and VGA drivers from Lizhuoyi
|
2014-03-08 09:24:24 -06:00 |
|
Gregory Nutt
|
4bbbe80a31
|
configs/rgmp/x86/default: Configuration converted to use the kconfig-frontends tools
|
2014-03-06 11:47:16 -06:00 |
|
Gregory Nutt
|
60f5acf8da
|
configs/pjrc-8051: Configuration converted to use the kconfig-frontends tools
|
2014-03-06 10:27:52 -06:00 |
|
Gregory Nutt
|
ca916b1060
|
onfigs/mx1ads/ostest: Configuration converted to use the kconfig-frontends tools
|
2014-03-06 09:48:25 -06:00 |
|
Gregory Nutt
|
17a96f6e1e
|
configs/us7032evb1/ostest: Configuration converted to use the kconfig-frontends tools
|
2014-03-06 09:17:11 -06:00 |
|
Gregory Nutt
|
86d7618733
|
configs/skp16c26/ostest: Configuration converted to use the kconfig-frontends tools
|
2014-03-06 08:28:49 -06:00 |
|
Gregory Nutt
|
79f8b6928a
|
configs/ne64badge/ostest and demo9s12nec64/ostest: Configurations onverted to use the kconfig-frontends tools
|
2014-03-05 17:27:58 -06:00 |
|
Gregory Nutt
|
72164cb176
|
Use common naming for rest of the toolchains too
|
2014-03-05 16:29:58 -06:00 |
|
Gregory Nutt
|
79dc48a71a
|
Use common naming for all buildroot toolchains
|
2014-03-05 15:37:07 -06:00 |
|
Gregory Nutt
|
972eeae12d
|
Add configuration ettings for the on-demand paging option
|
2014-03-05 14:25:49 -06:00 |
|
Gregory Nutt
|
a2a3f80120
|
configs/ntosd-dm320/nettest: Configuration converted to use the kconfig-frontends tools
|
2014-03-05 12:16:02 -06:00 |
|
Gregory Nutt
|
5f7987a9b7
|
configs/avr32dev1/nsh: Configuration converted to use the kconfig-frontends tools
|
2014-03-05 11:34:25 -06:00 |
|
Gregory Nutt
|
8e06aa47d6
|
Create AVR32 Kconfig files; reshuffled lots of configuration names
|
2014-03-05 11:25:36 -06:00 |
|
Gregory Nutt
|
1a996691a8
|
Create AVR32 Kconfig files; reshuffled lots of configuration names
|
2014-03-05 11:23:54 -06:00 |
|
Gregory Nutt
|
18f74bade9
|
configs/stm32f4discovery/pm: Configuration converted to use the kconfig-frontends tools
|
2014-03-04 08:58:01 -06:00 |
|
Gregory Nutt
|
218776ee90
|
configs/teensy/nettest: Configuration converted to use the kconfig-frontends tools
|
2014-03-03 15:54:38 -06:00 |
|
Gregory Nutt
|
c79bc5a19d
|
configs/mcu123-lpc214x/usbmsc: Configuration converted to use the kconfig-frontends tools
|
2014-03-03 15:40:18 -06:00 |
|
Gregory Nutt
|
2c1b3188e7
|
onfigs/ez80f910200zco/nettest: Configuration converted to use the kconfig-frontends tools
|
2014-03-03 11:40:29 -06:00 |
|
Gregory Nutt
|
4ac4814fb4
|
configs/olimex-strp711/nettest: Converted to use kconfig-frontends tools
|
2014-03-03 10:52:02 -06:00 |
|
Gregory Nutt
|
f5888496fb
|
configs/c5471evm/nettest converted use kconfig-frontends. C5471 build updated
|
2014-03-03 10:05:06 -06:00 |
|
Gregory Nutt
|
6b1aebdcae
|
arch/arm/src/lpc2378/Kconfig: Create Kconfig for the platform; Adjust configuration names for compatibility, configs/olimex-lpc2378/nsh: Convert to use the kconfig-frontends tools
|
2014-03-02 11:08:23 -06:00 |
|
Gregory Nutt
|
8462bcc072
|
Removed unused configuratin variable: CONFIG_PGTABLE_VADDR
|
2014-03-01 16:21:28 -06:00 |
|
Gregory Nutt
|
9f366d5e8d
|
configs/lm3s8962-ek/nsh converted to use the kconfig-frontends tools
|
2014-03-01 13:29:23 -06:00 |
|
Gregory Nutt
|
03042fe99a
|
configs/pic32-starterkit/nsh converted to use the kconfig-frontends tools
|
2014-03-01 11:10:30 -06:00 |
|
Gregory Nutt
|
eea4819a95
|
configs/mirtoo/nsh converted to use the kconfig-frontends tools
|
2014-03-01 10:49:19 -06:00 |
|
Gregory Nutt
|
df156de4a4
|
Buildroot EABI (vs OABI) is now the default
|
2014-02-28 07:49:15 -06:00 |
|
Gregory Nutt
|
81999adb15
|
SAM3/4: Cosmetic updates to ADC register defintion header files
|
2014-02-27 08:41:03 -06:00 |
|
Gregory Nutt
|
8e8c2cd5ec
|
SAM4E: Completes all SAM4E register definition header files. Also a SAMA5D3 ADc register definition fix
|
2014-02-26 17:00:22 -06:00 |
|
Gregory Nutt
|
cc5bc76761
|
SAM4E: Add AES and AFEC register definition header files (AFEC incomplete)
|
2014-02-26 15:11:20 -06:00 |
|
Gregory Nutt
|
165d202f41
|
SAM4E: Add CAN and RSWDT register definition header files
|
2014-02-26 14:14:19 -06:00 |
|
Gregory Nutt
|
22423b3770
|
SAM4E: Add EMAC register definition header file
|
2014-02-26 11:57:42 -06:00 |
|
Gregory Nutt
|
bcdf077953
|
SAM4E: Add CMCC register definition header file
|
2014-02-26 09:25:57 -06:00 |
|
Gregory Nutt
|
424f8e82d8
|
SAM4E: UDP register definition header file
|
2014-02-25 13:39:00 -06:00 |
|
Gregory Nutt
|
d34b1b620b
|
SAM3/4: Fix some build errors that crept in with the SAM4E support
|
2014-02-25 12:41:38 -06:00 |
|
Gregory Nutt
|
3b07bc6716
|
SAM4E: Update SAM3/4 TC and DMAC register definition header files
|
2014-02-25 10:56:23 -06:00 |
|
Gregory Nutt
|
4d600b7a73
|
SAM4E: Update SAM3/4 ACC, DACC, and PDC register definition header files
|
2014-02-24 14:48:33 -06:00 |
|
Gregory Nutt
|
1c596b06d8
|
SAM4E: Update SAM3/4 GPBR, HSMCI, PWM, RSTC, RTC, RTT, SMC, and WDT register definition header files
|
2014-02-24 12:38:19 -06:00 |
|
Gregory Nutt
|
a39db83fcc
|
SAM4E: Update SAM3/4 SMC and SUPC register definition header files
|
2014-02-24 10:26:44 -06:00 |
|
Gregory Nutt
|
6a5abb6cf9
|
SAM4E: Update SAM3/4 EEFC, MATRIX, and PMC register definition header files
|
2014-02-24 09:49:02 -06:00 |
|
Gregory Nutt
|
c3cbb6546a
|
ARMv6-M/ARMv7-M: Correct a register handling error in signal delivery (Kernel build mode only). Noted by Mike Smith.
|
2014-02-23 08:25:49 -06:00 |
|
Gregory Nutt
|
2cc96f9be1
|
SAM4E: USART/USART header files and drivers updated to support the SAM4E
|
2014-02-22 13:46:23 -06:00 |
|
Gregory Nutt
|
1b5f674f7b
|
SAM4E: update SAM3/4 Kconfig for SAM4E peripheral selections
|
2014-02-22 11:56:04 -06:00 |
|
Gregory Nutt
|
8d6565b85d
|
Rename sam3u_pmc.h to sam_pmc.h since it handles all of the SAM3/4 chips
|
2014-02-22 10:38:25 -06:00 |
|
Gregory Nutt
|
d303194e22
|
SAM4E: Update PMC and SPI register definition header files
|
2014-02-22 10:32:28 -06:00 |
|
Gregory Nutt
|
a3acfc785f
|
SAM4E: Pin multiplex definition header file
|
2014-02-21 18:10:53 -06:00 |
|
Gregory Nutt
|
4b824e8d5f
|
SAM4E: Add support for PIO and peripheral clocks
|
2014-02-21 12:34:04 -06:00 |
|
Gregory Nutt
|
74b4b1f054
|
SAM4E: Add memory map header file
|
2014-02-21 09:33:16 -06:00 |
|
Gregory Nutt
|
0a6942e068
|
SAM4E: Add vector definition header files
|
2014-02-21 08:46:16 -06:00 |
|
Gregory Nutt
|
bebb5d8c4d
|
unlink/rm can now be used on nodes in the pseudo-filesystem. There is new configuration option to suppress these costly and mostly useless operations on the pseudo-filesystem
|
2014-02-20 18:14:02 -06:00 |
|
Gregory Nutt
|
33508df77f
|
SAMD20: Some progress debugging SPI. Currently hangs
|
2014-02-20 15:20:42 -06:00 |
|
Gregory Nutt
|
8f469d70ed
|
SAMD20: Changes for clean build of SPI driver and SAMD20 Xplained Pro board with the I/O1 module installed
|
2014-02-20 11:27:59 -06:00 |
|
Gregory Nutt
|
8bbf4f3ec8
|
SAMD20: SPI driver is code-complete, but untested
|
2014-02-20 09:59:54 -06:00 |
|
Gregory Nutt
|
41afd1c3d8
|
SAMD: A little more SPI logic
|
2014-02-19 18:48:59 -06:00 |
|
Gregory Nutt
|
951f4ff4a3
|
LM3/4: Several errors were unmasked with UARTs > UART2 were enabled. Fromo Gosha
|
2014-02-19 17:02:30 -06:00 |
|
Gregory Nutt
|
ff899bf0e3
|
SAMD20: Add a framework for an SPI driver
|
2014-02-19 16:52:12 -06:00 |
|
Gregory Nutt
|
916308efc1
|
SAMD20: Move some common SERCOM logic to a separate file where it can be shared
|
2014-02-19 14:47:04 -06:00 |
|
Gregory Nutt
|
662622b5dc
|
STM32 Timer: Set CCMR wehn selecting timer channel. From David Sidrane
|
2014-02-18 13:50:46 -06:00 |
|
Gregory Nutt
|
bbb65432d9
|
STM32 SPI: Disable SPI before modifying CR1
|
2014-02-18 13:42:20 -06:00 |
|
Gregory Nutt
|
06e7e5dfa1
|
More STM32F429 Discovery FPU-related changes from David Alessio
|
2014-02-18 12:07:17 -06:00 |
|
Gregory Nutt
|
1fcd2bfd10
|
SAMD20: Increase FLASH waitstates to 2
|
2014-02-18 10:37:42 -06:00 |
|
Gregory Nutt
|
7bcf29c72a
|
Mostly cosmetic clean-up of comments
|
2014-02-17 19:22:53 -06:00 |
|
Gregory Nutt
|
246b949610
|
SAMD20: Fix BAUD calculation. Now comes up okay about 20% of the time
|
2014-02-17 18:09:17 -06:00 |
|
Gregory Nutt
|
0fd29be0d2
|
SAMD20: Now runs, but no serial output
|
2014-02-17 14:21:22 -06:00 |
|
Gregory Nutt
|
93ca836b85
|
SAMD20: Initial debug changes to get clocking
|
2014-02-17 11:36:52 -06:00 |
|
Gregory Nutt
|
05b5d78ae1
|
SAMD20: Misc changes for a clean build with debug enabled
|
2014-02-17 08:14:19 -06:00 |
|
Gregory Nutt
|
72e823a498
|
SAMD20: Add WDT and EVSYS register definition header files
|
2014-02-16 17:21:36 -06:00 |
|
Gregory Nutt
|
46ae018692
|
SAMD20: Add I2C slave register definition header file
|
2014-02-16 14:44:03 -06:00 |
|
Gregory Nutt
|
3c00c4f3fb
|
SAM20D: Add SPI and I2C master register definition header files
|
2014-02-16 13:07:31 -06:00 |
|
Gregory Nutt
|
b3f4814e9f
|
SAMD20: The basic port is complete but still untested
|
2014-02-16 11:34:32 -06:00 |
|
Gregory Nutt
|
cb6bf52939
|
SAMD20: Completes low-level USART logic
|
2014-02-16 09:42:29 -06:00 |
|
Gregory Nutt
|
fdccfe930b
|
Remove the unusable m68332evb configuration
|
2014-02-16 07:54:23 -06:00 |
|
Gregory Nutt
|
1f9d3b67ff
|
SAMD20: More SERCOM USART configuration logic
|
2014-02-15 17:53:55 -06:00 |
|
Gregory Nutt
|
3b0e6526a1
|
SAMD20: A little more USART logic
|
2014-02-15 15:58:48 -06:00 |
|
Gregory Nutt
|
de8f9e979c
|
SAMD20: Beginning of SERCOM UART configuration logic
|
2014-02-15 14:22:56 -06:00 |
|
Gregory Nutt
|
7304c246d1
|
SAM D20: Add SERCOM USART register definition header file
|
2014-02-15 11:37:09 -06:00 |
|
Gregory Nutt
|
5caa92f463
|
SAMD20: Finishes basic clock configuration logic
|
2014-02-15 10:18:05 -06:00 |
|
Gregory Nutt
|
1ed6677f57
|
SAM D20: More clock configuration logic (still incomplete)
|
2014-02-14 16:46:21 -06:00 |
|
Gregory Nutt
|
293484ffed
|
SAM D20: Put fuse related definition in a separate header file so make license statement cleaner
|
2014-02-14 14:33:34 -06:00 |
|
Gregory Nutt
|
294152fe36
|
SAM D20: A little more clock configuration logic (still incomplete)
|
2014-02-14 13:38:56 -06:00 |
|
Gregory Nutt
|
e98ef18df1
|
SAMD20: Add NVMCTRL register definition header file. Also empty framework for clock configuration
|
2014-02-14 11:03:22 -06:00 |
|
Gregory Nutt
|
8acdc31a6e
|
STM32 serial: Fix clone typo.. FLOWCONROL vs FLOWCONTROL
|
2014-02-14 09:09:56 -06:00 |
|
Gregory Nutt
|
c0c22040b0
|
SAMD20: Add SYSCTRL register definition header file
|
2014-02-13 15:41:16 -06:00 |
|
Gregory Nutt
|
4c2b18dee0
|
SAMD20: Add GCLK and PM register definition header files
|
2014-02-13 14:07:58 -06:00 |
|
Gregory Nutt
|
69ffc4a351
|
SAMD20: Add port configuration logic
|
2014-02-13 12:44:22 -06:00 |
|
Gregory Nutt
|
12e96b8f51
|
Add SAMD20 pin configuration definitions
|
2014-02-13 10:56:15 -06:00 |
|
Gregory Nutt
|
1364850552
|
Minimal changes to get a clean compilation of the SAMD20 Xplained configuration. Still a lot of missing logic
|
2014-02-13 09:14:03 -06:00 |
|
Gregory Nutt
|
1bd5ff87c4
|
Fix-up some SAMD20 SERCOM conditionals
|
2014-02-12 18:29:23 -06:00 |
|
Gregory Nutt
|
bd15ec2565
|
Add initial support for the Atmel SAMD20 Xplained Pro board
|
2014-02-12 17:50:58 -06:00 |
|
Gregory Nutt
|
ca9a8e5875
|
Add basic framework to support the Atmel SAMD Cortex-M+ chip
|
2014-02-12 15:07:11 -06:00 |
|
Gregory Nutt
|
6b4796fa5a
|
Fix typo cloned to many files: SAM32 vs SAM34
|
2014-02-12 13:00:24 -06:00 |
|
Gregory Nutt
|
b656602055
|
More changes to reduce complaints from CppCheck. Some latent bugs fixes, but probably some new typos introduced
|
2014-02-10 19:11:56 -06:00 |
|
Gregory Nutt
|
91b002a043
|
Many changes to reduce complaints from CppCheck. Several latent bugs fixes, but probably some new typos introduced
|
2014-02-10 18:08:49 -06:00 |
|
Gregory Nutt
|
2b40128148
|
USB HID mouse: Fixes the basic data transfer model. Returned position data is still bad
|
2014-02-09 16:50:09 -06:00 |
|
Gregory Nutt
|
2d91804642
|
LPC17 USB Host: Fix a compile error when USB debug is enabled
|
2014-02-09 15:54:58 -06:00 |
|
Gregory Nutt
|
9d8ecdbefd
|
Fix a compile error that crept into the LPC17xx USB host driver
|
2014-02-09 13:45:18 -06:00 |
|
Gregory Nutt
|
74cb19cfb2
|
Fix some typos in some documents
|
2014-02-08 10:46:29 -06:00 |
|
Gregory Nutt
|
cde8e80302
|
A10 had the same cut'n'paste error as did the LM4F
|
2014-02-03 17:22:47 -06:00 |
|
Gregory Nutt
|
ef899c5115
|
Fix cut'n'paster errors in conditional compilation. Prevented LM4F120 Launchpad UARTs 2-7 from being used
|
2014-02-03 17:00:05 -06:00 |
|
Gregory Nutt
|
ca807a4ed3
|
Update dependencies for CONFIG_BOOT_SDRAM_DATA. This should not be available if the system boots from SDRAM (via a bootloader)
|
2014-01-29 09:08:58 -06:00 |
|
Gregory Nutt
|
e5bb99bfb9
|
A10: Make sure it is tolerant of CONFIG_BOOT_SDRAM_DATA
|
2014-01-29 08:16:02 -06:00 |
|
Gregory Nutt
|
764ba4da70
|
SAMA5: Fix logic for running with data in SDRAM
|
2014-01-29 07:49:23 -06:00 |
|
Gregory Nutt
|
3ddb0ebaef
|
ARMv7-A: Conditionally compile out more unneeded logic when .data and .bss are in SDRAM
|
2014-01-28 16:39:08 -06:00 |
|
Gregory Nutt
|
72ee80b7cc
|
SAMA5: Mostly cosmetic
|
2014-01-28 15:54:03 -06:00 |
|
Gregory Nutt
|
6188eb7472
|
SAMA5: More variables-in-SDRAM stuff
|
2014-01-28 15:05:19 -06:00 |
|
Gregory Nutt
|
34b94de8fe
|
Add support for .data and .bss in SDRAM
|
2014-01-28 14:35:03 -06:00 |
|
Gregory Nutt
|
9f46dac1e2
|
Add option to indicatet that data is retained in SDRAM
|
2014-01-28 10:42:49 -06:00 |
|
Gregory Nutt
|
73d340e0bd
|
Remove EFM32 from build system
|
2014-01-27 10:41:06 -06:00 |
|
Gregory Nutt
|
3b172e5f41
|
Remove support for EFM32. Not ready to be fielded
|
2014-01-27 08:03:39 -06:00 |
|
Gregory Nutt
|
2c8a2bfffc
|
x86: fix 'Error: .size expression for idle_stack does not evaluate to a constant' bug from Matt Campbell
|
2014-01-25 13:53:23 -06:00 |
|
Gregory Nutt
|
2f837ccd2a
|
rename up_led*() functions to board_led_*()
|
2014-01-24 14:28:49 -06:00 |
|
Gregory Nutt
|
7b9a71eff2
|
Suppress option to use custom optimization levels for architectures that do not support it
|
2014-01-24 08:07:27 -06:00 |
|
Gregory Nutt
|
f3f5378acc
|
The optimization level can now be selected as part of the configuration
|
2014-01-24 07:45:35 -06:00 |
|
Gregory Nutt
|
d2472c7494
|
Should enable external bus after configuring it
|
2014-01-23 17:41:29 -06:00 |
|
Gregory Nutt
|
e4142f65fb
|
Assembler changes with the gcc-47 distribution from ARM mean that we need to be explicit about branch one or more of the wide branch opcodes results in bad table branching. From Mike Smith
|
2014-01-23 15:29:57 -06:00 |
|
Gregory Nutt
|
806b01deef
|
16z: Fix option bits; adjust system clock frequency
|
2014-01-23 12:06:57 -06:00 |
|
Gregory Nutt
|
7077d99f2f
|
Basic support for the EFM32 processor family from Richar Cochran
|
2014-01-23 07:56:10 -06:00 |
|
Gregory Nutt
|
7ce90ef7e2
|
arch/arm/src/Makefile: dependency directory list is now computed from the VPATH. From Richard Cochran
|
2014-01-23 07:41:00 -06:00 |
|
Gregory Nutt
|
7f8c50aa51
|
16Z: Some early bring-up fixes
|
2014-01-22 13:46:42 -06:00 |
|
Gregory Nutt
|
564fe7e232
|
configs/16z: Add support for 16z board
|
2014-01-22 11:50:37 -06:00 |
|
Gregory Nutt
|
d96bfc2d9b
|
X86: Add a configuration option to select the -m32 compiler option when needed
|
2014-01-18 07:38:50 -06:00 |
|
Gregory Nutt
|
7834ff4ce3
|
Fix error in last ARMv7-M up_disable_irq checkin
|
2014-01-15 15:26:32 -06:00 |
|
Gregory Nutt
|
32b4a48e7a
|
Misc changes from Richard Cochran
|
2014-01-15 11:05:15 -06:00 |
|
Gregory Nutt
|
be474523c4
|
Fix all Cortex-M3/4 implementations of up_disable_irq(). They were doing nothing. Thanks to Manuel Stühn for the tip.
|
2014-01-15 09:56:30 -06:00 |
|
Gregory Nutt
|
836057e340
|
Individual IRQs are not longer disabled on each interrupt. See ChangeLog for detailed explanation
|
2014-01-15 08:09:19 -06:00 |
|
Gregory Nutt
|
803cdfdaf1
|
Changes to get PX4 config to build. Also some warning removal
|
2014-01-14 13:30:22 -06:00 |
|
Gregory Nutt
|
b301471adb
|
A10: Serial clock is OSC24M. From Alan Carvalho de Assis
|
2014-01-10 15:32:42 -06:00 |
|
Gregory Nutt
|
a6bb107d10
|
Fix types in conditional compilation
|
2014-01-10 13:36:18 -06:00 |
|
Gregory Nutt
|
37f0db6e0c
|
Add support for the XPT2046 touchscreen controller on the Viewtool LCD module
|
2014-01-09 10:57:17 -06:00 |
|
Gregory Nutt
|
c31f2b6f78
|
Fix STM32F103VE SPI3 definitions; Fix bug introduced in recent NX reorganization. From Steve Redler IV
|
2014-01-08 16:44:11 -06:00 |
|
Gregory Nutt
|
a6d486557b
|
Cosmetic spaces to tabs change
|
2013-12-08 10:38:33 -06:00 |
|
Gregory Nutt
|
7cbb001f98
|
A10: Fix serial TX interrupts
|
2013-12-08 09:26:53 -06:00 |
|
Gregory Nutt
|
764e117965
|
A10: Correct handling of the serial busy interrupt
|
2013-12-08 08:51:19 -06:00 |
|
Gregory Nutt
|
126bec4e55
|
Add more nops after enabling MMU for Cortex-A8
|
2014-01-07 08:38:00 -06:00 |
|
Gregory Nutt
|
9d393e167c
|
A10: Handle UART BUSY interrupt; Back out change to mkconfig.c -- it causes problems for assembly
|
2013-12-07 11:46:08 -06:00 |
|
Gregory Nutt
|
aa1700895e
|
A10: Add missing interrupt handling logic for UART4-7 and remove bogus flow control logic
|
2014-01-06 12:08:32 -06:00 |
|
Gregory Nutt
|
6a9c63aa09
|
A10: Fix error in IRQ dispatch; vector table seems to be offset by 64 bytes?
|
2013-12-07 08:36:30 -06:00 |
|
Gregory Nutt
|
bb92016356
|
SVC is the preferred mnemonic vs. SWI for cortex A
|
2014-01-05 16:21:41 -06:00 |
|
Gregory Nutt
|
ab729802be
|
Oops. Mnemonic changed from SWI to SVC in cortex A
|
2014-01-05 15:59:49 -06:00 |
|
Gregory Nutt
|
8bc6125b3c
|
Add ARMv7-A syscall.h header file
|
2014-01-05 15:49:06 -06:00 |
|
Gregory Nutt
|
458465c8ed
|
Viewtools STM32F103: Add SSD1289 LCD support
|
2014-01-05 14:14:59 -06:00 |
|
Gregory Nutt
|
c49b0b09d9
|
ZNEO: Fix lost serial interrupt bug
|
2014-01-02 10:03:08 -06:00 |
|
Gregory Nutt
|
c01e95584c
|
STM32: Single wire UART support from Thomas Grubler
|
2014-01-02 07:56:46 -06:00 |
|
Gregory Nutt
|
5a8517b849
|
Add Z16F NSH configuration
|
2014-01-01 12:40:18 -06:00 |
|
Gregory Nutt
|
bca90d1c28
|
STM3240G-EVAL knxwm: Work around CodeSourcery library bug by switching to buildroot
|
2013-12-31 10:55:46 -06:00 |
|
Gregory Nutt
|
2507017695
|
Decoupling NX user interfaces to support NX kernel build (phase 1)
|
2013-12-27 13:18:20 -06:00 |
|
Gregory Nutt
|
64bb8b3341
|
Fix naming of STM32 F3 SPI2 MOSI and MISO pins. From Brian Webb
|
2013-12-27 11:15:18 -06:00 |
|
Gregory Nutt
|
bee251006b
|
STM32F107 OTG FS clock presecaler cannot be configurated after the USB clock is enabled
|
2013-12-26 10:45:21 -06:00 |
|
Gregory Nutt
|
4922f71703
|
Add support for STM32F107 OTG FS (doesn't work) and update USB support for Viewtools STM32F107~
|
2013-12-26 09:22:37 -06:00 |
|
Gregory Nutt
|
e963a4d862
|
F103VC, F105, and F107: Fix configuration and building of USB. configs/viewtools-stm32f107: Fix build for F103 and F107: F103 has USB device; F107 has OTGFS
|
2013-12-25 18:34:15 -06:00 |
|
Gregory Nutt
|
1c61bb0c53
|
Fix a duplicate label introduce in recent commit
|
2013-12-23 14:29:25 -06:00 |
|
Gregory Nutt
|
5c28d5a15b
|
Disable CONFIG_ARCH_INT_DISABLEALL: It does not work in its current form
|
2013-12-23 14:15:11 -06:00 |
|
Gregory Nutt
|
76b04f137f
|
Need to protect state on stack to do nested interrupt handling
|
2013-12-23 14:11:32 -06:00 |
|
Gregory Nutt
|
d41bfe4d5b
|
Fixes a few more high priority, nested interrupt logic
|
2013-12-23 11:13:56 -06:00 |
|
Gregory Nutt
|
22e208dbf9
|
Several fixes related to Cortex-M RAM vectors
|
2013-12-22 18:19:08 -06:00 |
|
Gregory Nutt
|
88faa55ac1
|
Fix some missing parameters in macros
|
2013-12-22 16:29:36 -06:00 |
|
Gregory Nutt
|
483a4d8d2b
|
Finish the high priority, nested interrupt handler test (does not work)
|
2013-12-22 13:23:57 -06:00 |
|