sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
34,610 Commits 1 Branch 0 Tags 291 MiB
b7c0033713
Commit Graph

61 Commits

Author SHA1 Message Date
Gregory Nutt
9546481054 Fix some typographical errors. 2018-09-14 06:55:45 -06:00
Gregory Nutt
c790450ba2 Remove CONFIG_ARCH_CALIBRATION. It is awkward to use and no longer necessary now that we have apps/examples/calib_udelay. 2018-08-19 10:06:36 -06:00
Gregory Nutt
500d2c2289 arch/arm/src/lpc11,lpc17,lpc43,stm32,stm32l4: Fix scope of naming. CONFIG_CAN_TSEG1->CONFIG_LPC17_CAN_TSEG, for example. 2018-06-28 15:44:42 -06:00
Gregory Nutt
45cdc3a3d0 arch/arm/src/lpc11,lpc17,stm32,stm32l4: Fix scopy of nameing. CONFIG_CANx_BAUD->CONFIG_LPC17_CANx_BAUD, for example. 2018-06-28 14:47:14 -06:00
Gregory Nutt
e4922ed9f0 Remove instructures to CD to tools/ before running ./configure.sh 
Squashed commit of the following:

    configs/*/README.txt: Replace each occurrence of './configure.sh' with 'tools/configure.sh'
    configs/*/README.txt:  Remove 'cd ..' after each './configure.sh'
    configs/*/README.txt:  Remove 'cd -' after each './configure.sh'
    configs/*/README.txt:  Remove 'cd tools' before each './configure.sh'
    configs/README.txt:  Remove instruction to CD tools/ before running configure.sh.
 2018-05-09 11:41:46 -06:00
Gregory Nutt
c867d42018 arch/arm/src/lpc54xx: Add support for card detect and write protect to SDMMC driver. configs/lpcxpresso-lpc54628: Add logic to bring up SDMMC. 2017-12-20 10:52:05 -06:00
Gregory Nutt
43a221f308 configs: Remove some old, redundant, obsolete boilerplate regarding toolchains that has been cloned into most of the board README files. 2017-11-26 11:36:03 -06:00
Gregory Nutt
9aac1dd44d configs: Remove all setenv.bat files. Remove all references to setenv.sh and setenv.bat from all config README files. 2017-04-26 10:12:13 -06:00
Gregory Nutt
c428661e18 apps/examples/usbterm is gone because it can be configured to perform an illegal call into the OS. Remove all traces of CONFIG_EXAMPLES_USBTERM* and all of the illegal device support. 2017-03-09 15:39:28 -06:00
Gregory Nutt
3dbdb3bb31 CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit 2017-01-31 11:52:00 -06:00
Gregory Nutt
9ac00a355f Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots. 2017-01-31 09:16:01 -06:00
Gregory Nutt
b39556f625 Update READMEs 2016-11-22 09:03:50 -06:00
Gregory Nutt
7825dbb3a1 configs: Remove all button configurations that depended on the obsoleted ARCHBUTTON example 2016-11-22 07:23:23 -06:00
Gregory Nutt
7c34a77b54 Move apps/system/usbmonitor to nuttx/drivers/usbmonitor 2016-06-30 12:24:33 -06:00
Gregory Nutt
5b2aa7bf99 Remove all traces of CONFIG_SYSLOG 2016-06-19 13:59:43 -06:00
Gregory Nutt
63b1eb09e6 Centralize definitions associated with CONFIG_DEBUG_CAN 2016-06-15 15:45:27 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
3a74a438d9 Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO 2016-06-11 11:50:18 -06:00
Gregory Nutt
3e0efd7279 Fix all URLs to the NuttX repository 2016-04-06 17:56:40 -06:00
Gregory Nutt
e46cd30c14 Change use of mknulldeps.sh to mkwindeps.sh 2016-01-09 14:13:44 -06:00
Gregory Nutt
9e99cfa4e0 Correct many bitbucket.org URLs 2015-06-28 09:14:52 -06:00
Gregory Nutt
7214e52fb2 Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
46bd0bc307 This cleans up most of the remaining SourceForge references 2015-06-26 18:13:20 -06:00
Gregory Nutt
0dbf579aa8 Fix numerous typos in configuration variable names. Tracked down by Alan Carvalho de Assis 2015-05-23 17:08:35 -06:00
Gregory Nutt
49415e7cc8 Two r's and only two r's in the word interrupt 2015-04-23 14:04:43 -06:00
Gregory Nutt
bb5f545173 STM32: Fix STM32F100CB pin configuration (from Kosma Moczek); and make chip naming a little more consistent 2014-05-07 12:54:27 -06:00
Gregory Nutt
51950d7850 Undefine IRQPRIO in all configurations it should not be set 2014-04-16 08:29:39 -06:00
Gregory Nutt
0cefef9cb5 Documentatin updated; fix errors in some comments 2014-03-28 09:52:07 -06:00
Gregory Nutt
d7d856e504 Use common naming for all buildroot toolchains 2014-03-05 15:37:07 -06:00
Gregory Nutt
4895541df0 configs/hymini-stm32v/usbserial: Configuration converted to use the kconfig-frontends tools 2014-03-04 11:52:51 -06:00
Gregory Nutt
9490522ca5 configs/hymini-stm32v/usbmsc: Configuration converted to use the kconfig-frontends tools 2014-03-03 15:04:15 -06:00
Gregory Nutt
58eed436e9 Removed almost all ostest configurations 2014-02-28 19:19:11 -06:00
Gregory Nutt
024cb72187 Move apps/examples/usbmsc to apps/system/usbmsc 2013-09-25 16:54:39 -06:00
Gregory Nutt
9638bff522 Rename examples/usbstorage to examples/usbmsc. From CCTSAO 2013-09-05 08:07:03 -06:00
Gregory Nutt
efded598fd Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_ 2013-07-26 10:09:17 -06:00
Gregory Nutt
b40def3027 Add support for a generic windows-based EABI toolchain; Add NX configuration to force default NXTK border colors 2013-06-13 11:04:18 -06:00
Gregory Nutt
9ab85d01ef Remove CONFIG_XYZ_BUILTIN configurations, replace with the single CONFIG_NSH_BUILTIN_APPS. Add SAM3/4 sam_periphclks.h which is just a header file that includes the right header file. Misc SAM3U-EK cleanup 2013-06-12 17:32:00 -06:00
Gregory Nutt
60224247dd Minor updates to Kconfig and README files 2013-05-17 07:37:09 -06:00
Gregory Nutt
40b8b9bdc7 hymini-stm32v: Updated README file 2013-05-14 08:39:03 -06:00
patacongo
26ee7e0449 Correct a memory leak in NSH 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5600 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-02 23:56:54 +00:00
patacongo
2400d95042 Mostly cosmetic changes 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5344 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-13 15:50:38 +00:00
patacongo
aa827a048f Add tools/mkdeps.bat and tools/mkdeps.c 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5342 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-13 00:38:59 +00:00
patacongo
61566c9d44 Document problem with GCC 4.8.3 and the NXFLAT tools 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5228 42af7a65-404d-4744-a932-0658087f49c3
 2012-10-10 19:58:57 +00:00
patacongo
f92d824392 Rename gnu-nxflat.ld to gnu-nxflat-gotoff.ld; Add gnu-nxflat-pcrel.ld 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5225 42af7a65-404d-4744-a932-0658087f49c3
 2012-10-10 17:01:23 +00:00
patacongo
bd8716842c Update all config README.txt files to show that they use the EABI buildroot toolchain 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5218 42af7a65-404d-4744-a932-0658087f49c3
 2012-10-06 17:29:36 +00:00
patacongo
bf7b20456f Upate some pathes for the new NuttX repository 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5156 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-17 19:33:42 +00:00
patacongo
49a9950814 Remove executable property from source and make files 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5146 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-13 18:46:10 +00:00
patacongo
cadc799f21 CONFIG_DRAM_END configuration change from Richard Cochran 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5038 42af7a65-404d-4744-a932-0658087f49c3
 2012-08-20 12:44:15 +00:00
patacongo
747c73b6e8 STM32 CAN TX/RX pins reversed; inconsistent conditional compilation 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5017 42af7a65-404d-4744-a932-0658087f49c3
 2012-08-08 23:23:15 +00:00
patacongo
ab4510ab62 Add STM32 watchdog configuration 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4617 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-16 17:20:36 +00:00