req->usockid maybe < 0 or > CONFIG_NET_USRSOCK_RPMSG_SERVER_NSOCKS,
if so , priv->pfds[req->usockid] will access invalid memory.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
The default mode for Rpmsgdev is to read/write data as long as possible for
caller, this mode does not apply to tun devices, tun devices can read and
write only one complete ip packet at a time.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Description bMS_VendorCode is incorrectly configured. Change it to
USB_REQ_GETMSFTOSDESCRIPTOR(0xee), which is the same as the request
processing logic for GET_MS_DESCRIPTOR in the code
Signed-off-by: sunkun3 <sunkun3@xiaomi.com>
In usbclass_unbind, DEV_FREEEP is called first, and later
usbclass_freereq does not free memory due to ep NULL
Signed-off-by: sunkun3 <sunkun3@xiaomi.com>
1.add new intf regulator_set_mode to manual set rehulator lower power mode;
2.when add auto lp desc,the regulator lp mode is controlled by pm framework;
Signed-off-by: dulibo1 <dulibo1@xiaomi.com>
when add supply desc,the regulator is linked to the parent regulator
1.if enable the regualtor, the parent regulator is enabled
2.if disable all child regulator, the parent regualtor is disabled
Signed-off-by: dulibo1 <dulibo1@xiaomi.com>
1. virtio devics/drivers match and probe/remote mechanism;
2. virtio mmio transport layer based on OpenAmp (Compatible with both
virtio mmio version 1 and 2);
3. virtio-serial driver based on new virtio framework;
4. virtio-rng driver based on new virtio framework;
5. virtio-net driver based on new virtio framework
(IOB Offload implementation);
6. virtio-blk driver based on new virtio framework;
7. Remove the old virtio mmio framework, the old framework only
support mmio transport layer, and the new framwork support
more transport layer and this commit has implemented all the
old virtio drivers;
8. Refresh the the qemu-arm64 and qemu-riscv virtio related
configs, and update its README.txt;
New virtio-net driver has better performance
Compared with previous virtio-mmio-net:
| | master/-c | master/-s | this/-c | this/-s |
| :--------------------: | :-------: | :-------: | :-----: | :-----: |
| qemu-armv8a:netnsh | 539Mbps | 524Mbps | 906Mbps | 715Mbps |
| qemu-armv8a:netnsh_smp | 401Mbps | 437Mbps | 583Mbps | 505Mbps |
| rv-virt:netnsh | 487Mbps | 512Mbps | 760Mbps | 634Mbps |
| rv-virt:netnsh_smp | 387Mbps | 455Mbps | 447Mbps | 502Mbps |
| rv-virt:netnsh64 | 602Mbps | 595Mbps | 881Mbps | 769Mbps |
| rv-virt:netnsh64_smp | 414Mbps | 515Mbps | 491Mbps | 525Mbps |
| rv-virt:knetnsh64 | 515Mbps | 457Mbps | 606Mbps | 540Mbps |
| rv-virt:knetnsh64_smp | 308Mbps | 389Mbps | 415Mbps | 474Mbps |
Note: Both CONFIG_IOB_NBUFFERS=64, using iperf command, all in Mbits/sec
Tested in QEMU 7.2.2
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
A sensor of this type measures the force on it, and additionally
compares the force with one or more specified thresholds. The sensor
can output the force value directly. Moreover, it's usually applied
as a press key. In that case, when it detects a force greater than
some given threshold, a corresponding event is reported.
Signed-off-by: jinxudong <jinxudong@xiaomi.com>
The memory allocated with strdup and asprintf is done via lib_malloc
so we need to use lib_free to deallocate memory otherwise the assertion
"Free memory from the wrong heap" is hit with flat mode and user separated
heap enabled mode.
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Add COMPOSITE_DEVICES configuration so that external composite
devices can also know the maximum number of supported classes.
The default COMPOSITE_DEVICES number is 8.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
The enumeration process for composite and non-composite devices
has a lot of duplicate code. Treating the code for composite
devices as universal enumeration code can reduce redundant code.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
VELAPLATFO-12536
This provides the initial hooks for Flattened Device Tree support
with QEMU RV. It also provides a new procfs file that exposes the
fdt to userspace much like the /sys/firmware/fdt endpoint in Linux.
See https://www.kernel.org/doc/Documentation/ABI/testing/sysfs-firmware-ofw
Nodes in the fdt are not yet usable by the OS.
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
Signed-off-by: liaoao <liaoao@xiaomi.com>
Both the device and the pipe used the FSNODEFLAG_TYPE_DRIVER type before,
and now add an independent pipe type
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
ni_buffer is defined in the initialized structure, put it in the data segment, it will increase the flash size
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
