Commit Graph

1299 Commits

Author SHA1 Message Date
DisruptiveNL
41d9365f06 drivers/can/mcp2515.c and boards/arm/stm32/nucleo-f4x1re: MCP2525 SPI STD-EXT ID fixes. Verified on MCP2525 tested on nucleo-f4x1re. 2019-10-28 08:02:15 -06:00
Gregory Nutt
46bec8e030 arm/stm32/stm32vldiscovery/src/stm32_bringup.c: Fix a copy paste error introduced with commit 637004e70c. 2019-10-27 18:40:38 -06:00
Gregory Nutt
7dad735fc3 boards/arm/kinetis/twr-k60n512/src/k60_appinit.c: Suppress errors related to card detect GPIO configuration if SDHC support is not enabled. 2019-10-27 18:02:16 -06:00
Matias N
fd625eaa89 arch/arm/src/stm32l4 and boards/arm/stm32l4/nucleo-l476rg: Add support for LPTIM timers on the STM32L4 as PWM outputs. 2019-10-27 17:21:32 -06:00
Gregory Nutt
637004e70c boards/arm/stm32/stm32vldiscvoery/src/: Fix error found in build testing. All configurations must provide boar_app_initialize() which is required if CONFIG_LIB_BOARDCTL is enabled. 2019-10-27 15:58:26 -06:00
Gregory Nutt
53d5174f82 boards/arm/a1x/pcdueno-a10/src/: Fix error found in build testing. All configurations must provide boar_app_initialize() which is required if CONFIG_LIB_BOARDCTL is enabled. 2019-10-27 15:19:52 -06:00
Gregory Nutt
ba0afebdcb arch/arm/src/stm32 and boards/arm/stm32/olimex-stm32-p207/src: Fix an error found in build testing. There is not relationship be CONFIG_STM32_USBHOST and CONFIG_USBHOST, yet they they are used interchangably. This means that can (and did) get out of synch causing link time failures. This commit adds logic to select CONFIG_USBHOST when CONFIG_STM32_USBHOST is selected, keeping the two settings syncrhonized. Furthermore, since CONFIG_STM32_USBHOST is the authoritative setting, all ocurrences of CONFIG_USBHOST were replaced with CONFIG_STM32_USBHOST in the architecture code and in this one board code that was producing the error in build testing. 2019-10-27 15:02:56 -06:00
Gregory Nutt
858768e84b boards/arm/dm320/ntosd-dm320/src/: Fix error found in build testing. All configurations must provide boar_app_initialize() which is required if CONFIG_LIB_BOARDCTL is enabled. 2019-10-27 14:49:05 -06:00
Gregory Nutt
175131fb31 boards/arm/sama5/sama5d4-ek/src/sam_appinit.c: Fix error found in build testing. Bad conditional compilation for board_app_initialize(). Should depend only on CONFIG_LIB_BOARDCTL, CONFIG_BUILD_KERNEL is irrelevant. 2019-10-27 13:49:25 -06:00
Gregory Nutt
86a5eae270 boards/arm/stm32/axoloti: Every BSP must provide boot board_late_initialize() AND board_app_initialize(). That is because you never now how the configuration will be set. CONFIG_LIB_BOARDCTL may be auto-selected by applications that need boardctl() support... requiring the existence of board_app_initialize(). 2019-10-26 17:45:45 -06:00
Gregory Nutt
d7155a0208 boards/arm/am335x/beaglebone-black/src: Fix typos, AM355x->AM335x 2019-10-26 17:06:28 -06:00
Jussi Kivilinna
49ade3ca72 Merged in jussi_kivilinna/nuttx/stm32l4r_add_dmamux (pull request #1062)
Add DMA support for STM32L4+ series

* Add DMA support for STM32L4+

* stm32l4xrxx_rcc: enable "Range 1 boost" mode if any PLL freq above 80 Mhz

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-25 13:05:56 +00:00
Alin Jerpelea
2be1153030 Merged in alinjerpelea/nuttx (pull request #1061)
boards: cxd56xx: spresense: cleanup and new defconfig

* arch: cxd56xx: remove NVIC_SYSH redefinition

    The NVIC_SYSH is already defined in nvicpri.h

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: spresense: configs: enable SPRESENSE_EXTENSION

    Enable high current mode for the Spresense Extension board on all examples
    that have SDCARD support

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: spresense: ifdef SDCARD_TXS02612

    The SD Card TXS02612 port expander is hosted on the Extension board and
    should not be enabled if the extension board is not prezent.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: spresense: configs: increase MQ_MAXMSGSIZE

    This change is needed by the display driver on spresense platform

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: spresense: config: add lcd examples defconfig

    This is a configuration for the basic nx examples

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-24 14:26:02 +00:00
Fabio Balzano
19c61dbe4b boards/arm/imxrt/imxrt1060-evk: Fix FT5X06 CTRSTn pin configuration, increased number of pollwaiters for the FT5X06, tuned resolution during pointer dragging. 2019-10-24 08:19:02 -06:00
Gregory Nutt
34ac62433b boards/arm/imxrt/imxrt1060-evk/README.txt: Added instructions to run the LVGL demo. 2019-10-23 13:24:57 -06:00
Fabio Balzano
85fb2a81e8 boards/arm/imxrt/imxrt1060-evk/README.txt: Fix typos and whitspace problems in README file. 2019-10-23 13:22:25 -06:00
Fabio Balzano
d7d5a7541d boards/arm/imxrt/imxrt1060-evk: Added Littlevgl demo configuration into imxrt1060-evk board directory. 2019-10-23 13:19:13 -06:00
Fabio Balzano
5ca0b57a59 i.MXRT1060-EVK (mostly): Add basic LCD support for the board IMXRT1060-EVK. 2019-10-23 13:17:30 -06:00
Alin Jerpelea
e2d2eba445 Merged in alinjerpelea/nuttx (pull request #1060)
Master

* boards: cxd56xx: spresense: add Spresense Image Processor

     Enable support for accelerated format convertor, rotation and so on.
    using the CXD5602 image processing accelerator.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards:cxd56xx:spresense: initalize GNSS and GEOFENCE at boot

    Add the optional initialization of  GNSS and GEOFENCE at boot
    if the drivers are enabled

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-23 14:43:45 +00:00
Alin Jerpelea
f7af996f1d Merged in alinjerpelea/nuttx (pull request #1059)
boards: cxd56xx: spresense: add board_timerhook function

* boards: cxd56xx: spresense: add board_timerhook function

    in preparation for SDK we muts have a weak board_timerhook function

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: usbhost: add missing endif

    By accident an endif was missing.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: audio: add build barrier

    The audio implementation should not be beuilt if the config
    CONFIG_CXD56_AUDIO is not set.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch:arm:cxd56xx: add ge2d.h header

    The header is used by imageproc.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-23 13:12:21 +00:00
Masayuki Ishikawa
7389f86561 Merged in masayuki2009/nuttx.nuttx/stm32f4dis_with_gs2200m (pull request #1057)
stm32f4dis with gs2200m

* drivers: wireless: Add SPI_SELECT() to _read/write_data() in gs2200m.c

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* boards: stm32f4discovery: Add support for gs2200m

    NOTE: GS2200M for Spresense works with mikroe STM32F4 Discovery Shield (slot3)

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-22 13:38:41 +00:00
Gregory Nutt
230c80b8e1 Cosmetic changes from review of last PR. 2019-10-21 08:51:47 -06:00
Alin Jerpelea
07f9154e5b Merged in alinjerpelea/nuttx (pull request #1056)
boards: cxd56xx: add board support for LTE modem and modem driver

* drivers: modem: add altair modem driver

    Add modem driver for the altair modem

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add board support for LTE modem

    Add the Altair LTE modem support on the Spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: spresense: add LTE defconfig

    Add the Altair LTE modem defconfig for spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-21 14:14:33 +00:00
Fabio Balzano
8bfb9a486e boards/arm/imxrt/imxrt1060-evk/src/imxrt_lcd.c: Add support for LCD. Clean up some LCD-related interfaces. 2019-10-20 10:46:21 -06:00
Gregory Nutt
1386e70d85 boards/arm: Fix/verify to errors found in build testing. 2019-10-19 15:25:38 -06:00
Gregory Nutt
d6b4e90d70 arch/arm/src/s32k1xx: Support configuration and initialization of the flash configuration bytes. boards/arm/s32k1xx/s32k1**evb/scripts/flash.ld: Create a special FLASH section to hold the FLASH configuration bytes. 2019-10-19 13:14:02 -06:00
Gregory Nutt
e77ea539a4 boards/arm/am335x/beaglebone-black/src/: Use the same bring-up structure is is used with other boards. 2019-10-18 07:37:36 -06:00
Alin Jerpelea
13c25a310b Merged in alinjerpelea/nuttx (pull request #1054)
boards: spresense: audio: add missing header

Add the missing header to silence compiler warnings

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-18 12:51:15 +00:00
Masayuki Ishikawa
c3b6a2892d Merged in masayuki2009/nuttx.nuttx/stm32f4dis-mmcsdspi (pull request #1053)
boards: stm32f4discovery: Add support for MMCSD_SPI

This PR works with STM32F4 Discovery Shield plus microSD click

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-18 02:38:16 +00:00
Daniel Pereira Volpato
1f46e294a3 boards/arm/stm32f0l0g0/nucleo-g070rb: Add PWM support and GPIO_TIM3_* mappings
boards/arm/stm32f0l0g0/nucleo-g070rb/configs/nsh: Enable PWM example
2019-10-17 12:06:10 -06:00
Masayuki Ishikawa
2c16d756cc Merged in masayuki2009/nuttx.nuttx/gs2200m_with_reset (pull request #1050)
Gs2200m with reset

* include: wireless: Add reset handler to struct gs2200m_lower_s

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* drivers: wireless: Add reset and unreset sequence in gs2200m.c

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* boards: cxd56xx: Add reset handler to cxd56_gs2200m.c

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-15 21:03:33 +00:00
Masayuki Ishikawa
679fe23045 Merged in masayuki2009/nuttx.nuttx/fix_posix_spawn (pull request #1049)
Fix posix spawn

* boards: lc823450-xgevk: Fix build error for posix_spawn

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* boards: stm32f4discovery: Fix build error for posix_spawn

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-13 00:25:47 +00:00
Matias N
8ccb5fabf8 libs/libxx/Kconfig: CONFIG_LIBC_LOCALE is needed to build libcxx. A
math library is also needed, however, here are various ways to provide a
math library so CONFIG_LIBM is not now set.

boards/arm/stm32l4/nucleo-l476rg/scripts/Make.defs:  Add required
definitiions if libcxx is enabled.
2019-10-12 08:51:13 +08:00
Gregory Nutt
eeff429939 Fix some trivial spacing issues noted in review of PR. 2019-10-11 23:52:15 +08:00
Alin Jerpelea
716c7c9bee Merged in alinjerpelea/nuttx (pull request #1048)
boards: arm: cxd56xx: audio: add power_control and audio_tone_generator

* boards: arm: cxd56xx: audio: add power_control

    Add a simeple way to control the audio power for userspace apps

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: audio: add audio_tone_generator

    Add a simple way to control the audio buzzer with defined frequency
    for userspace apps

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-11 15:46:15 +00:00
Daniel P. Volpato ‎
0142dd96a2 Add files that were supposed to be included as part of 0d1934a740. 2019-10-11 14:47:53 +08:00
Alin Jerpelea
33d0de4d57 Merged in alinjerpelea/nuttx (pull request #1046)
boards: spresense: add audio implementation

* boards: arm: cxd56xx: add audio implementation

    Add the board audio control implemantation

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: update audio defconfig

    Small updates to build the platforms specific audio driver

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: drivers: add audio implementation

    Add the audio implementation for CXD56XX chip

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: fix Load switch GPIO

    During the initial bringup the grong GPIO was set.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-09 23:55:20 +00:00
Alin Jerpelea
60814806a4 Merged in alinjerpelea/nuttx (pull request #1045)
boards: arm: cxd56xx: different updates

* boards: cxd56xx: spresense: initialize SCU at boot

    The SCU has to be initialized at bootup on spresense board because several
    functions depend on it.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: add audio control definitions

    Add audio control definitions for the audio implementation.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: add audio defconfig

    Add defconfig for the audio implementation

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-08 16:23:58 +00:00
Daniel Pereira Volpato
f800529f67 boards/arm/stm32f0l0g0/nucleo-g070rb/include/board.h: Add TIMx clock frequencies
boards/arm/stm32f0l0g0/nucleo-g070rb: Enable basic timers
2019-10-07 22:10:32 -06:00
Xiang Xiao
3bc62f1ccc Change space to tab and help to ---help--- in Kconfig files. 2019-10-05 21:39:12 -06:00
Gregory Nutt
6a0545ec6b Trivial cleanup from re-review of last patch set. 2019-10-05 14:27:01 -06:00
DisruptiveNL
8d435b2e2d boards/arm/tiva/tm4c123g-launchpad/: SPI CAN functionality on TM4C123GXL - ek-tm4c123gxl_spi_can. 2019-10-05 14:18:08 -06:00
Masayuki Ishikawa
193698c89c Merged in masayuki2009/nuttx.nuttx/fix_untracked_files (pull request #1042)
boards: cxd56xx: common: Add .gitignore not to show untracked files.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-03 13:08:04 +00:00
Masayuki Ishikawa
4c53f0d232 Merged in masayuki2009/nuttx.nuttx/spresense_smp (pull request #1041)
Spresense smp

* arch: arm: Add ARCH_GLOBAL_IRQDISABLE to ARCH_CHIP_CXD56XX in Kconfig

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch: arm: cxd56xx: Make fpuconfg() public in cxd56_start.c

    NOTE: fpuconfig() is called in both cxd56_start.c and cxd56_cpustart.c

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch: arm: cxd56xx: Add support for SMP

    NOTE: To run cxd56xx in SMP mode, new boot loader which will be
    released later must be used.

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* arch: arm: cxd56xx: Add irq routing for SMP in cxd56_irq.c

    NOTE: In cxd56xx, each external interrupt controller can be
    accessed from a local APP_DSP (Cortex-M4F) only. This commit
    supports IRQ routing for SMP by calling up_send_irqreq() in
    both up_enable_irq() and up_disable_irq().

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* boards: spresense: Add smp configuration

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-03 13:06:21 +00:00
Masayuki Ishikawa
30021c4dee Merged in masayuki2009/nuttx.nuttx/add_gc_sections (pull request #1040)
boards: spresense: Add --gc-sections to LDFLAGS in scripts/Make.defs

Also, add -ffunction-sections -fdata-sections to ARCHCFLAGS

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-01 12:03:54 +00:00
Masayuki Ishikawa
9673debe2b Merged in masayuki2009/nuttx.nuttx/fix_cxd56_ostest (pull request #1039)
fix_cxd56_ostest

* boards: spresense: Fix config names in cxd56_ostest.c

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* boards: spresense: Enable ostest in rndis/defconfig

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* boards: spresense: Enable ostest in wifi/defconfig

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-01 03:24:55 +00:00
Xiang Xiao
2d794f4102 Configuration: Auto-select CONFIG_BUILD_LOADABLE when either CONFIG_BUILD_KERNEL or CONFIG_BINFMT_LOADABLE is selected. 2019-09-30 06:57:16 -06:00
Nathan Hartman
46aaec7ba0 Fix minor typos in docs and comments. 2019-09-29 12:52:20 -06:00
Gregory Nutt
c1c36db37e boards/arm/stm32rl4: Remove inclusion of STM32 L4 header files from all board.h header files. 2019-09-29 11:37:46 -06:00
Gregory Nutt
e34ee02929 Add some comments ti i.MXRT board.h header files. 2019-09-29 09:41:16 -06:00
Gregory Nutt
cbf6ffe4e7 boards/arm/stm32f7: Remove inclusion of STM32 F7 header files from all board.h header files. 2019-09-29 09:31:47 -06:00
Gregory Nutt
f4b57499c9 Update some comments, spacing. 2019-09-28 09:55:31 -06:00
Daniel Pereira Volpato
0566525764 libs/libxx/Kconfig: Automatically select CONFIG_CLOCK_MONOTONIC when CONFIG_LIBCXX is selected.
Remove hardcoded -DCLOCK_MONOTONIC from CFLAGS in Make.defs of several configurations.  That defintiion is now automatically adding this define when CONFIG_LIBCXX=y.
2019-09-27 12:31:08 -06:00
Gregory Nutt
65e6ff11cc boards/arm/stm32/stm32f429i-disco: Clean up problems after removing forbidden header files from board.h header file. 2019-09-27 11:46:13 -06:00
Gregory Nutt
ccbd6317c5 boards/arm/stm32/stm32f429i-disco/include/board.h: Remove forbidden STM32 header file inclusions. Fix some coding standard issues. 2019-09-27 11:16:04 -06:00
Juha Niskanen
c3d24571fb Fix some typos. Mostly inital->initial. 2019-09-27 06:32:32 -06:00
Alin Jerpelea
7420f4dc5e Merged in alinjerpelea/nuttx (pull request #1038)
cxd56xx: various fixes

* arch: arm: cxd56xx: Support to set any i2c frequency

    This commit supports to be able to set the i2c frequency other than just
    100 or 400 Hz.

* arch: arm: cxd56xx: Enable SD clock during access to SD card

    - Improve GNSS low sensitivity with SD card inserted
    - Reduce power consumption by stopping SD clock

* arch: arm: cxd56xx: Do PANIC() when cpu rx fifo is overflow

    If CPU Rx FIFO is overflow, it's fatal error for system. In such a case,
    this commit changes to allow the user to notice by calling PANIC() for
    debuggability enhancement.

* arch: arm: cxd56xx: Fix compile error in sdhci debug code

* arch: arm: cxd56xx: Remove assertion in cpu tx queue

    When CPU Tx queue is overflow, it returns -EAGAIN instead of assertion
    to be able to retry.

* arch: arm: cxd56xx: Add configurations for cpu fifo elements

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: Fix LPADC configuration

    LPADC options defined in the same symbol name, so kconfig tool
    couldn't process them correctly.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: Update loader and gnssfw ver.17660

* arch: arm: cxd56xx: Fix hang-up when error interrupt occurs

    Fix a problem that error interrupts are not cleared.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56xx: Fix sdhci semaphore

    Fix inital value of semaphore in sdhci drive.r

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: Treat the initial value of LNA power as off

    LNA is always turned power on when GNSS is started. So it is desirable
    that the initial value of the LNA power is off by default.

* boards: cxd56xx: Remove initial setting of PIN_AP_CLK

    PIN_AP_CLK is used as a port selector of SDIO expander on the extension
    board, and is set output low in initalizing. Therefore, this pin cannot
    be used for other board. To avoid this restriction, remove this initial
    operation because this pin is pulled down by default on the extension
    board.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-09-26 11:28:26 +00:00
Alan Carvalho de Assis
99cd9340f5 boards/arm/samd2l2/arduino-m0/src/sam_usb.c: Add usbnsh board configuration. 2019-09-22 16:13:06 -06:00
Gregory Nutt
5e27915d24 Update a README; fix typos. 2019-09-22 16:12:05 -06:00
Gregory Nutt
4ac9577fb2 Update a README file. 2019-09-22 13:58:21 -06:00
Alan Carvalho de Assis
35227fb873 boards/arm/samd2l2/arduino-m0: Add initial board support for the Arduino M0. 2019-09-22 10:43:36 -06:00
Alan Carvalho de Assis
8eafe880dc boards/arm/stm32/stm32f4discovery/src: Add support for external DS1307 module. 2019-09-22 07:08:00 -06:00
Gregory Nutt
f4cc21a5c3 boards/arm/stm32/stm32f429i-disco/README.txt: Trivial update to README. 2019-09-20 06:23:48 -06:00
Juha Niskanen
5c853cd1dc libs/libc/unistd/lib_getcwd.c: remove stray sched_unlock(). Also fixes several typos. 2019-09-20 06:23:48 -06:00
Juha Niskanen
e8b5dd4528 Fix use of undefined pp-token #errror, other typos. 2019-09-19 18:19:18 -06:00
Gregory Nutt
9eba6bf018 arch/arm/src/stm32f0l0g0 and boards/arm/stm32f0l0g0/nucleo-g071rb: The last change did NOT eliminate the build problem. This one does. 2019-09-18 15:13:13 -06:00
Alin Jerpelea
54ef3efc35 Merged in alinjerpelea/nuttx (pull request #1033)
boards: spresense: Add board initialization for isx012

Add isx012 initialization to the board and include the needed headers

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-09-18 11:42:35 +00:00
Daniel Pereira Volpato
50e34d50b6 boards/arm/stm32f0l0g0/nucleo-g070rb/include/board.hboards/arm/stm32f0l0g0/nucleo-g070rb: Enable PWR peripheral and increase sysclk to max. frequency. SYSCLK can be increased now that VOS and flash wait states are properly configured. 2019-09-17 11:32:51 -06:00
Daniel Pereira Volpato
4737fd7497 boards/arm/stm32f0l0g0/nucleo-g070rb/scripts/ld.script: Fix .ARM.exidx section overlap with .data 2019-09-17 11:23:53 -06:00
Daniel Pereira Volpato
d78e60d18e boards/arm/stm32f0l0g0/nucleo-g070rb: Initial support for board STM32 NUCLEO-G070RB, including NSH config 2019-09-17 11:20:26 -06:00
Alin Jerpelea
b55c518a1a Merged in alinjerpelea/nuttx (pull request #1031)
boards: spresense: add isx012 camera initialization and config

* boards: spresense: add isx012 camera initialization

    Add the initialization for the isx012 camera sensor.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: spresense: add camera defconfig

    For easy configuration add camera defconfig for spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-09-17 16:58:09 +00:00
Juha Niskanen
ebc6f51641 Fix some typos 2019-09-17 10:46:23 -06:00
Gregory Nutt
8d87e624bf boards/arm/cxd56xx/spresense/Kconfig: Add a configuration to select if an extension board is attached to the SPresence. If there is no extension board attached, the SPresense may run in a low-power mode by default (as determined by the CONFIG_CXD56_CUSTOM_PINCONFIG option). If an extension board is present, then the SPresense will need to run at a higher power mode, selected by the new CONFIG_SPRESENSE_EXTENSION option. 2019-09-17 05:41:10 -06:00
Takayoshi Koizumi
ef28729374 boards/arm/cxd56xx/spresense/include/board_pinconfig.h: Add board specific pin configurations of CXD5602 pins to fit Spresense board. 2019-09-16 15:32:58 -06:00
Gregory Nutt
66a55c91e7 Linker scripts: Fix some alignment problems. 2019-09-15 18:06:36 -06:00
Gregory Nutt
2925c28f8f All linker scripts: Preface all _edata defininitions with . = ALIGN(4). Otherwise, the last bytes in the .data section may not be initialized properly. Also convert all linker scripts indent in units of 8-spaces to units of 4-spaces. 2019-09-15 17:22:16 -06:00
Gregory Nutt
0bd60c3722 All linker scripts: Preface all _ebss defininitions with . = ALIGN(4). Otherwise, the last bytes in the .bss section will not be initialized properly. Also convert all linker scripts that use TABs to spaces. 2019-09-15 15:27:58 -06:00
Gregory Nutt
e2949d0dcf boards/arm/stm32/axoloti, omnibusf4, and stm32f4discovery: If CONFIG_SCHED_CRITMONITOR is selected, then make sure that ITM and DWT resources are enabled before accessing ITM and DWT registers. By default, these registers are disabled. Suggested by Juha Niskanen. 2019-09-13 07:22:00 -06:00
Nathan Hartman
3ca55cc439 boards/arm/tiva/tm4c123g-launchpad/scripts/tm4c123g-launchpad.ld: Add alignments for the TMC4123G-LaunchPad as well. 2019-09-12 10:03:39 -06:00
Gregory Nutt
bbbe9d85c5 Move EXIDX assignments inside of braces so that we can be assure that the symbols have the correct alignment. Suggested by Daniel P. Volpato
Squashed commit of the following:

    Some scripts use TABs, others spaced.  Make usage consistent.
    Move __exidx_end assignment inside of brackets.
    Remove old __exidx_end assignment.
    Move __exidx_start assignment inside of brackets.
    Remove old __exidx_start assignment
2019-09-12 09:57:50 -06:00
Gregory Nutt
94224639ca Fix a few errors introduced into linker scripts by recent commits. 2019-09-12 08:11:27 -06:00
Gregory Nutt
50f9e26d5d Modify all a few more linker scripts missed in 415e3d3448, probably because they were created after 2eb4fe5ffb. 2019-09-11 21:10:51 -06:00
Alan Carvalho de Assis
415e3d3448 Modify all files from 2eb4fe5ffb to use solution from Daniel P. Volpato. 2019-09-11 21:00:41 -06:00
Daniel Pereira Volpato
490d945f3e boards/arm/stm32f0l0g0/nucleo-g071rb/scripts/ld.script: Fix .ARM.exidx section overlap with .data 2019-09-11 12:49:37 -06:00
Gregory Nutt
d8adf712a2 boards/arm/imx6/sabre-6quad/scripts/Make.defs: Yet another boards/ re-organization fixup. 2019-09-11 11:17:07 -06:00
Gregory Nutt
5a41d7f9b5 boards/: Several more fixes to Make.defs files and README.txt files. More collateral damage from the big boargs/ directory re-organization. 2019-09-11 11:15:56 -06:00
Nathan Hartman
366053e464 Fix typos, 1 in a #define, others in comments. This changes one definition: _MQ_TIMEDRECIEVE is changed to _MQ_TIMEDRECEIVE. It appears this symbol is not used anywhere. 2019-09-11 08:56:56 -06:00
Gregory Nutt
cc694e9862 Fix some new warnings found in build testing. 2019-09-10 08:20:53 -06:00
Pavel Pisa
97dfff2011 boards/arm/lpc17xx_40xx/lx_cpu/configs/nsh/defconfig: Tested ETHRENET, UARTs, heap in external SDRAM, use of symbol tables for applications loading over TFTP and kernel modules insertion. USB and SD card enabled but there are some issues (probably config or IO ports) still. 2019-09-10 07:21:01 -06:00
Nathan Hartman
91ef2ec394 Fix a few minor typos 2019-09-08 15:59:14 -06:00
Juha Niskanen
822bb06967 Fix some typos. Also minor update to stm32f7/nucleo-144/README.txt and stm32l4/nucleo-l496zg/README.txt board documentation. 2019-09-05 08:12:50 -06:00
Nathan Hartman
ce8fb54d07 Fix various typos 2019-09-03 17:00:22 -06:00
Augusto Fraga Giachero
68bbc8438c drivers/timers/pwm.c: Move the pwm/pwm.c driver to timers/pwm.c, The drivers/pwm contained only one .c file (pwm.c), so to avoid the proliferation of sub-directories inside drivers/ is better to move the pwm.c driver to drivers/timers. The pwm.h header was moved to include/nuttx/timers to keep consistency, so all files referencing it need to be updated. 2019-09-02 07:57:10 -06:00
Gregory Nutt
85770966ff boards/Board.mk: Add support to pass dependency paths. boards/arm/cxd56xx/common/Makefile: Add correct dependency paths for board/ and src/ subdirectories. 2019-09-01 12:19:36 -06:00
Gregory Nutt
c6434e3182 boards/arm/lpc17xx_40xx/lx_cpu/configs/nsh/defconfig: Correct shit defconfig file. Recent patch dumped a prohibited .config file as the defconfig file when a proper defconfig file created via 'make savdefconfig' is required. Bad. 2019-08-31 14:35:17 -06:00
Gregory Nutt
e5c3874a3b Tiva directories: Fix TM4C129XNCZAD part number in Kconfig and identifiers. Rationale: Fully specify that this is the 212-pin BGA package (ZAD ending) and for consistency with earlier changes to other Tiva TM4C12x part numbers in Kconfig names and identifiers. 2019-08-30 08:46:57 -06:00
Gregory Nutt
dc09d7018b Coding style fixes. Run every new file through tools/nxstyle to assure that it is close to the NuttX coding standard. 2019-08-30 08:37:27 -06:00
Pavel Pisa
64c918783b boards/arm/lpc17xx_40xx/lx_cpu/src/lpc17_40_ulan.c: Provides for separate, non-standard uLAN registration at build-/run-time. 2019-08-30 07:58:05 -06:00
Pavel Pisa
350ba5105c boards/arm/lpc17xx_40xx/lx_cpu: Add support for the PIKRON LX_CPU board. 2019-08-30 07:42:13 -06:00
Alin Jerpelea
3806a01c5d Merged in alinjerpelea/nuttx (pull request #1024)
noards: arm: cxd56xx: migrate common code

* boards: arm: cxd56xx: common: move boot to common

    This is a common function and can be reused by all boards.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: move flash to common

    This is a common function and can be reused by all boards.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: move I2C driver to common

    This is a common function and can be reused by all boards.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: move uid to common

    This is a common function and can be reused by all boards.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: move usbmsc to common

    This is a common function and can be reused by all boards.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56: add SPH

    The SPH is used by the ASMP implementation from the SDK.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-26 14:29:55 +00:00
Gregory Nutt
27e4bfffd4 Update some comments and README files. 2019-08-24 13:06:43 -06:00
Gregory Nutt
e4c333820a tools/refresh.sh: Fix some remaining breakage from the boards/ directory reorganization; boards/arm/s32k1xx: Add CONFIG_NSH_ARCHINIT=y to all NSH configurations. 2019-08-24 08:43:46 -06:00
Gregory Nutt
b3d609959c arch/arm/src/s32k1xx/hardware/s32k1xx_flexcan.h: Add an incomplete FlexCAN register definition header file. Still missing some bitfield definition. Also updates some README files. 2019-08-23 07:35:49 -06:00
Alin Jerpelea
6ecee7e403 Merged in alinjerpelea/nuttx (pull request #1021)
boards: cxd56xx: add SCU sensors (2/2)

* boards: cxd56xx: add cxd56_bh1721fvc initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_bh1745nuc initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_bm1383glv initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_bm1422gmv initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_bmi160 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_bmp280 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_kx022 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_lt1pa01 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_rpr0521rs initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_sensors initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arch: arm: cxd56: add Backup Log driver

    The driver will be used to backup logs on crash.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: add crashlog driver

    Add Crashlog driver with support for reset on crash

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: move gs2200m initialization

    Move the board gs2200m initalization to the common board folder

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: move ili9340 initialization

    Move the board ili9340 initalization to the common board folder

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: move lpm013m091a initialization

    Move the board lpm013m091a initalization to the common board folder

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: arm: cxd56xx: common: typo fixes

    HEADER: Updates on file location
    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-23 13:28:35 +00:00
Gregory Nutt
3613ae33a7 boards/arm/s32k1xx/s32k118evb, s32k146evb, and s32148evb: Correct the 'sense' of the LED discrete output. A high level illuminates the LED. 2019-08-22 12:12:22 -06:00
Gregory Nutt
37960ff780 All S32K1xx flash.ld configurations: Do not write into FLASH configuration field.
Extend s32k146 and s23k148 NSH configurations so that they support more features.
2019-08-22 08:26:27 -06:00
Alin Jerpelea
d6366c1e82 Merged in alinjerpelea/nuttx (pull request #1019)
Add the sensor initialization for cxd56xx boards in the common board folder

* boards: cxd56xx: apds9930: typo fix

    fix apds9930 typos

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_ak09912 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: move cxd56_bmi160 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_apds9930 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: cxd56xx: add cxd56_apds9960 initialization

    We are adding the sensor initialization for cxd56xx boards in the
    common board folder.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-22 13:55:35 +00:00
Alin Jerpelea
a91d86523c Merged in alinjerpelea/nuttx (pull request #1018)
boards: cxd56xx: add SCU sensors

* drivers: platform: add Avago APDS9930 Proximity and Ambient light Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Rohm BH1721FVC Ambient Light Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Rohm BH1745NUC Color Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Rohm BM1383GLV/BM1383AGLV Pressure Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Rohm BM1422GMV/BM1422AGMV Magnetic Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Bosch BMI160 Sensor support

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Bosch BMP280 Barometic Pressure Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Kionix KX022/KX122 Acceleration Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Murata LT1PA01 Proximity and Ambient light Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: spresense: add Rohm RPR0521RS Proximity and Ambient light Sensor

    This sensor is connected to the SCU on spresense board

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: sensors: bmi160: add optional I2C address

    Add a menu option for the case when the SDO pin is pulled to VDDIO

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-22 12:49:05 +00:00
Gregory Nutt
6ddd4752b0 Eliminate new warnings found in build testing. 2019-08-21 13:45:31 -06:00
Alin Jerpelea
3ed844640d Merged in alinjerpelea/nuttx (pull request #1015)
tools: unix: add support for common board folder

* tools: unix: add support for common board folder

    this patch adds support for a common board folder and simplifies the code
    and maintenance on boards that share the same code

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* cxd56xx: migration to a common folder

    This is the first platform to be migrated to the new common folder
    structure.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-21 17:25:16 +00:00
Nathan Hartman
be5a40c656 Fix typos in comments. 2019-08-21 09:32:59 -06:00
Alin Jerpelea
c6355f58d6 Merged in alinjerpelea/nuttx (pull request #1014)
boards: add stub drivers folder for later use

* boards: add stub drivers folder for later use

    The board/drivers folder is added for future use.

    In this folder we should place drives that are platform specific and
    depend on HW that is present only on a specific platform.

    NOTE: All shared drivers should go to the regular driver folder
    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tools: shift BOARD_DIR one level up

    In preparation for drivers and common folders we are moving the
    BOARD_DIR path up one level.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tools: add drivers/platform symlink

    Link the boards/<arch>/<chip>/drivers dir to drivers/platform

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* drivers: add platform specifc drivers extension

    There are platforms that use specific drivers and we should be able to
    include those drivers in the build

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* board: cxd56xx: drivers: add AK09912 driver for SCU

    This is a platform specific driver connected on the SCU unit.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-21 13:39:29 +00:00
Gregory Nutt
507e01cb8e This commit adds support for the NXP S32K148EVB
Squashed commit of the following:

    boards/arm/s32k1xx/s32k148evb:  Correct linker scripts for the S32K148, Update README files, Hook eht S32K148EVB into the configuration and build system.

    arm/s32k1xx/s32k148evb:  Verify core and peripheral clocking.  It is the same as the S32K146EVB.  Fixed one-too-many copy-paste error in both.

    boards/arm/s32k1xx/s32k148evb:  Correct LED and button pin number for the S32K148EVB.

    boards/arm/s32k1xx/s32k148evb:  Change all occurrences of 146 to 148.

    boards/arm/s32k1xx/s32k148evb:  Initial S32K148EVB.  Initial commit is just  clone of S32K146EVB with file name changes
2019-08-20 17:02:29 -06:00
Gregory Nutt
5655a9d362 Update README files. 2019-08-20 14:39:46 -06:00
Gregory Nutt
c6026d7500 With these changes the S32K146EVB minimal NSH is function. Only verifed while running from SRAM.
arch/arm/src/s32k1xx/s32k1xx_lowputc.c:  Fix a typo that prevented LPUART1 from working.
    arch/arm/src/s32k1xx/s32k1xx_periphclocks.c and related files:  Fix yet another case of confusion between pre-decremented and non-decremented divider values.  Enforce the rule that dividers are not decremented until the moment they are written into registers.
    arch/arm/src/s32k1xx/s32k1xx_clockconfig.c:  Fix another problem related to whether a divider is pre-decremented or not.  The answer must be the divder values are never pre-decremented.  They are decremented just before being written to hardware.
    arch/arm/src/s32k1xx/s32k1xx_clockconfig.c:  Clean up some bad conditional logic.  Precedence of operators problem.
    boards/arm/s32k1xx/s32k118evb:  Add support for execution out of SRAM.  This is helpful for bringup when you want to avoid putting a lethal image in FLASH.
    arch/arm/src/s32k1xx/s32k1xx_clockconfig.h:  Remove crystal frequency, it is not used.
    arch/arm/src/s32k1xx/s32k1xx_wdog.h:  Fix a typo in a register name.i
    boards/arm/s32k1xx/s32k*evb/configs/nsh/defconfig:  Create Motorola SREC output format.
2019-08-20 14:35:36 -06:00
Gregory Nutt
faf8bdcbf8 Eliminate some new warnings found in build testing 2019-08-19 17:50:04 -06:00
David Sidrane
d20d0227ae Merged in david_s5/nuttx/master_h7 (pull request #1008)
stm32h7:Ported UID from F7

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-19 22:21:11 +00:00
Gregory Nutt
4d2f6e85b8 boards/arm/stm32h7/nucleo-h743zi/src/nucleo-h743zi.h: Correct logic that determines if the RTC driver is available. Find in build testing. 2019-08-19 13:17:28 -06:00
Gregory Nutt
df1294906d arch/arm/src/s32k1xx/s32k1xx_clockconfig.c and related files: Fix confusion about who decrements the rster value. Some dividers may have a function range of 1..8 but the register value is 0..7. There were several places where values were getting decremented twice: Once by higher up logic and once by the register access logic. A such dividers were reviewed and, hopefully, all were fixed. 2019-08-19 13:07:45 -06:00
Gregory Nutt
33ab25ae14 arch/arm/src/s32k1xx/s32k14x and boards/arm/s32k1xx/s32k146evb/src: Numerous fixes to get a clean build of the S32K146EVB. 2019-08-19 10:49:50 -06:00
Alin Jerpelea
d42fc094fa Merged in alinjerpelea/nuttx (pull request #1003)
arm: stm32: codestyle fixes

* arm: stm32f0l0g0: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: stm32f7: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: stm32h7: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: stm32l4: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: stm32: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-19 15:16:08 +00:00
Gregory Nutt
39d1a02c6d This commit adds support for the S32K146EVB
Squashed commit of the following:

    s32k1xx/s32k146evb/scripts/flash.ld:  Update the linker script for the S32K146.
    boards/:  Hook the S32K146EVB into the configuration and build system.
    s32k146_clockconfig.c:  Add S32K146 clock configuration.
    boards/arm/s32k1xx/s32k146evb/src/s32k146_periphclocks.c:  Update peripheral clocking for the S32K146.
    arm/s32k1xx/s32k146evb:  Initial support fo S32K146EVB.  Starting point is just the S32K118EVB with name changes.
2019-08-19 09:14:14 -06:00
Gregory Nutt
c3f16a46f0 This commit brings the S32K118EVB board to code complete and ready for testing. This commit adds some minor initialization fixes (like disabling the WDOG, enabling the I-cache, and initializing the MPU. It brings more files in from the Kinetis port for the IDLE loop and for GPIO functionality. This also address register definition header file for LMEM and MPU. 2019-08-18 17:26:10 -06:00
Gregory Nutt
db0641556e boards/arm/s32k1xx/s32k118evb: Implement board support for LEDs and buttons. This is taken from the Freedom-K66f with has the same LED and button configuation as the S32K116EVB and uses the same GPIO IP.
boards/arm/s32k1xx/s32k118evb/include/board.h:  Add LPUART0 pin disambiguation.

arch/arm/src/s32k1xx/hardware:  Add pin mux definitions for S32K116, 118, 142, 144, 146, and 148.

arch/arm/src/s32k1xx/s32k1xx_pin.c and .h:  Add support for PIDR register that disables a gneral purpose pin from acting as an input.

arch/arm/src/s32k1xx/s32k1xx_pin.c and .h:  The device does not support slew rate controls or open drain (on all the pins).  Only pins that are configured for a protocol that requires open-drain (e.g;, LPI2C, LPUART single-wire) will work in open-drain mode.
2019-08-18 12:02:54 -06:00
Gregory Nutt
e7a3231d7a Squashed commit of the following:
Finishes peripheral clock initialization:

      arch/arm/src/s32k1xx/s32k11x/s32k11x_clockmapping.c
      arch/arm/src/s32k1xx/s32k14x/s32k14x_clockmapping.c
        Provide MCU-specific mapping of clock names to PCC control registers.

      boards/arm/s32k1xx/s32k118evb/src/s32k118_periphclocks.c
        Provides initial clocking for for the S32K118EVB

    arch/arm/src/s32k1xx/s32k1xx_periphclocks.c:  Add logic to initialize peripheral clocking.

    arch/arm/src/s32k1xx/s32k1xx_clockconfig.c:  Add SIM clock configuration.
2019-08-17 11:50:32 -06:00
Gregory Nutt
1f021add53 arm/arm/src/stm32f7 and h7: Fix coding standard problems found by tools/nxstyle in files modified/added in last PR. 2019-08-17 08:20:31 -06:00
David Sidrane
1bbf5c9449 Merged in david_s5/nuttx/master_h7 (pull request #1002)
stm32h7 RTC and friends  support

* stm32h7:Removed f7 in file path

* stm32f7:Fix overwritten IRQ enabled

       System boot order calls clock_initialize then up_initalize.
       clock_initialize was setting up the alarm IRQ
       up_initalize is initializing the NVIC.

       This most likely worked in the past due to a bug in the
       NVIC init code that failed to clear the Interrupt enables.
       That was fixed in 510b0f7e arch/arm/src: Correct all ARMv7-M
       architectures.  Interrupts were not be disabled correctly
       on power up.

* stm32h7:Ported over F7 RTC

* nucleo-h743zi:Add RTC

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-17 14:01:28 +00:00
Alin Jerpelea
210de35cb5 Merged in alinjerpelea/nuttx (pull request #999)
arm: sam & tiva: codestyle fixes

* arm: samd2l2: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: samd5e5: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: samv7: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: tiva: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-16 13:40:59 +00:00
Gregory Nutt
b0b33584ff boards/arm/s32k1xx/s32k118evb/src/s32k118_clockconfig.c: Add clock configuration data for the S32K118EVB. 2019-08-15 16:56:57 -06:00
Gregory Nutt
fba40c40f1 arch/arm/src/s32k1xx/s32k1xx_clockconfig.h: Add data structures that will eventually be used to configure clocking. 2019-08-15 14:03:02 -06:00
Alin Jerpelea
061728b440 Merged in alinjerpelea/nuttx (pull request #996)
arm: sam34: codestyle fixes

* arm: sam34: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: sama5: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-15 16:19:17 +00:00
Gregory Nutt
eb4fff5221 Minor updates from review of last PR. 2019-08-15 10:05:21 -06:00
Gregory Nutt
17a4efe031 boards/arm/s32k1xx/s32k118evb: More build fixes. 2019-08-14 13:31:21 -06:00
Gregory Nutt
963031f42c arch/arm/src/s32k1xx: A few fixes. The build progresses further but still fails. 2019-08-14 12:40:51 -06:00
Gregory Nutt
8987a9e374 This commit adds initial board support for the NXP S32K118EVB. This configuration is intended, initially, to support development of the architecture support. This is VERY much a work in progress and you should not use this configuration unless you are interested in assisting with the bring-up.
Squashed commit of the following:

    boards/arm/s32k1xx/s32k118evb/configs/nsh:  Add a basic NSH configuration.
    boards/arm/s32k1xx/s32k118evb/scripts:  Add linker scripts and Make.defs.
    configs/:  Hook the S32K118EVB board into the configuration system.
    boards/arm/s32k1xx/s32k118evb:  Add initial support for the NXP S32K118EVB.
2019-08-14 08:47:35 -06:00
Alin Jerpelea
0dc41ff4ba Merged in alinjerpelea/nuttx (pull request #993)
arm: codestyle fixes 4

* arm: max326xx: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: moxart: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: nrf52: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: nuc1xx: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: xmc4: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: tms570: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: str71x: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-14 14:43:29 +00:00
Alin Jerpelea
de47c8f52f Merged in alinjerpelea/nuttx (pull request #992)
arm: codestyle fixes 3

* arm: lpc214x: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: lpc2378: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: lpc31xx: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: lpc54xx: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: lpc43xx: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-14 12:34:18 +00:00
Alin Jerpelea
907d6b085b Merged in alinjerpelea/nuttx (pull request #991)
arm: codestyle fixes 2

* arm: kl: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: lc823450: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: lpc17xx_40xx: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-13 16:08:49 +00:00
Nathan Hartman
0b501304c7 boards/arm/timva/tm4c123g-launchpad: Update paths for boards/ restructuring. Update paths to board directories in documentation and scripts. 2019-08-12 12:16:40 -06:00
Alin Jerpelea
f362d161db Merged in alinjerpelea/nuttx (pull request #990)
arm: codestyle fixes 1

* arm: a1x: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: am335x: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: c5471: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: cxd56xx: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: dm320: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: efm32: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: imx6: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: imxrt: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: kinetis: codestyle fixes

    After the board restructuration is time for codestyle cleanup

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-12 16:06:40 +00:00
Manuel Stühn
5585cc421c Merged in manuelstuehn/nuttx/feature/bsd-portable (pull request #975)
change all occurences of /bin/(ba)sh to /usr/bin/env bash which appears more portable

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-10 15:57:26 +00:00
raiden00pl
5ed743d58a Merged in raiden00/nuttx_f334 (pull request #974)
Master

* Revert "Merged in yanqil-br/feature-multi_chan_pwm (pull request #973)"

    This reverts commit aef0e0b538.

* arch/arm/src/{stm32/stm32f7/stm32h7/stm32l4}/stm32_pwm.c: configure multi-channel duty only if channel specified. This allows you to update duty cycle for a single channel

* nucleo-f303re/configs: add basic NSH configuration

* nucleo-f303re/configs/pwm: enable console on UART2 and set entry point to nsh_main

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-10 15:14:19 +00:00
Nathan Hartman
29a3412407 boards/arm/efm32/olimex-efm32g880f128-stk/src/.gitignore: Restore .gitignore file that was lost in the boards/ directory reorganization. 2019-08-09 11:11:20 -06:00
Gregory Nutt
8f3e024ef7 boards/arm/lpc17xx_40xx/u-blox-c027/configs/nsh/defconfig: Remove stray character in defconfig file. 2019-08-08 10:13:55 -06:00
Gregory Nutt
ad122066ea defconfigs: All paths assigned to CONFIG_PASS1_BUILDIR must include the chip name. 2019-08-07 18:17:43 -06:00
Alin Jerpelea
1358e829ad Merged in alinjerpelea/nuttx (pull request #967)
group boards based on chip

* a1x: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* am335x: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* c5471: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* scx56xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* dm320: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* efm32: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imx6: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imxrt: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* kinetis: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* kl: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lc823450: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc17xx_40xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc214x: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc2378: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc31xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc43xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc54xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* max326xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* moxart: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nrf52: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nuc1xx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam34: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd2l2: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd5e5: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samv7: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f0l0g0: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f7: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32h7: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l4: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* str71x: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tiva: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tms570: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* xmc4: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* p112: typo fix

    this boars is a z80 board and was moved to the wrong arch

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* avr: at32uc3: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* avr: at90usb: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* avr: atmega: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* hc: mcs92s12ne64: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mips: pic32mx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mips: pic32mz: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* misoc: lm32: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* or1k: mor1kx: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* renesas: m32262f8: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* renesas: sh7032: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* risk-v: gap8: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* risk-v: nr5m100: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sim: sim: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* x86: qemu: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* xtensa: esp32: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z16: z16f2811: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z80: ez80: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z80: z180: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z80: z80: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z80: z8: group boards based on chip

    All boards based on the same chip are moved to the same folder

    following the arch layout <arch>/<chip>/<board>.

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tools: update tools for boards based on chip

    This patch updates only the linux tools

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pcduino-a10: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* beaglebone-black: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* c5471evm: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* spresense: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ntosd-dm320: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* efm32-g8xx-stk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* efm32gg-stk3700: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-efm32g880f128-stk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sabre-6quad: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imxrt1050-evk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* imxrt1060-evk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k28f: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k64f: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-k66f: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* kwikstik-k40: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* teensy-3.x: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* twr-k60n512: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* twr-k64f120m: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-kl25z: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* freedom-kl26z: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* teensy-lc: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lc823450: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lincoln60: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4088-devkit: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4088-quickstart: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpcxpresso-lpc1768: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mbed: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mcb1700: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc1766stk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* open1788: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* pnev5180b: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* u-blox-c027: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* zkit-arm-1769: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mcu123-lpc214x: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* zp214xpa: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc2378: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ea3131: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ea3152: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-lpc-h3131: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* bambino-200e: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4330-xplorer: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4337-ws: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4337-evb: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpc4370-link2: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lpcxpresso-lpc54628: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* max32660-evsys: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* moxa: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nrf52-generic: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nutiny-nuc120: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arduino-due: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* flipnclick-sam3x: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam3u-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4cmp-db: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4e-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4l-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4s-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sam4s-xplained-pro: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d2-xult: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d3-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d3x-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sama5d4-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd20-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* samd21-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* saml21-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* metro-m4: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* same70-xplained: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* same71-xult: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* axoloti: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* clicker2-stm32: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* cloudctrl: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* fire-stm32v2: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* hymini-stm32v: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* maple: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mikroe-stm32f4: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f103rb: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f207zg: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f302r8: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f303re: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f303ze: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f334r8: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f410rb: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f446re: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f4x1re: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-1152re: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-e407: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-h405: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-h407: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p107: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p207: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32-p407: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-stm32: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* omnibusf4: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* photon: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* shenzou: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3210e-eval: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3220g-eval: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm3240g-eval: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32_tiny: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32butterfly2: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f103-minimum: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f334-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f3discovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f411e-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f429i-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f4discovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32ldiscovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32vldiscovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* viewtool-stm32f107: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* b-l072z-lrwan1: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f072rb: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f091rc: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-f071rg: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l073rz: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f051-discovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f072-discovery: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-144: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f746-ws: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f746g-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32f746g-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-h743zi: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* b-l475e-iot01a: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l432kc: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l432re: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l476rg: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* nucleo-l496zg: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l476-mdk: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l476vg-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* stm32l4r9ai-disco: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* olimex-strp711: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* dk-tm4c129x: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* eagle100: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* ekk-lm3s9b96: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-cc1310: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-cc1312r1: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s6432-s2e: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s6965-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm3s8962-ek: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm4f120-launchpad: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm4c123g-launchpad: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* lm4c1294-launchpad: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* launchxl-tms57004: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* tms570ls31x-usb-kit: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* xmc4500-relax: defconfig update

    add ARCH_CHIP to defconfig

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* zp214xpa: typo fix

    add missing tools/oocd.sh

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-07 20:49:39 +00:00
Gregory Nutt
c92da140eb boards/arm: Update patches to linker scripts in kernel/Makefile files. 2019-08-06 12:09:04 -06:00
Gregory Nutt
207e5072ef defconfigs: pathes assigned to CONFIG_PASS1_BUILDIR must now include the architecture. 2019-08-06 11:06:28 -06:00
Alin Jerpelea
af28821c77 Merged in alinjerpelea/nuttx (pull request #966)
group boards by architecture

* z80: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* z16: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* xtensa: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* x86: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* sim: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* risc-v: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* renesas: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* or1k: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* misoc: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* mips: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* hc: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* avr: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* arm: group boards by architecture

    all boards that share the same architecture are moved to the same arch
    folder following the soc layout

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

* boards: group boards by architecture

    Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-06 14:37:27 +00:00