They are not really defined and used in any where:
uint32_t up_getmisa(void);
uint32_t up_getarchid(void);
uint32_t up_getimpid(void);
uint32_t up_getvendorid(void);
uint32_t up_gethartid(void);
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
- Add test for mode support, which is architecture dependent
- Add tests for address alignment and region size
- Add option to query for access rights
- The function goes through every PMP entry and tests if an address
range from [base, base+size] has been configured for desired
access rights.
- If several PMP entries match the range and access rights, the
information is combined
- End result is either no access, a partial match was found, or a full
match was found. Details about the partial match are not provided.
The intent for testing access rights and not just blindly applying them
is a case where they are already set in e.g. a bootloader. In this
case, nothing should be done, unless the configuration does not match,
in which case the software must not continue further.
It can provide better auto complete experience for modern code editor,
since they use clang/gcc based parser to analyze code but lacks some
target dependent info such as __LP64__ for riscv64.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Gregory Nutt has submitted the SGA
Omni Hoverboards has submitted the SGA
David Sidrane has submitted the ICLA
Mateusz Szafoni has submitted the ICLA
Sebastien Lorquet has submitted the ICLA
Paul Alexander Patience has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
All modern desgin support stack pointer and it's also an
important information, so let's standardize this interface.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Ken Pettit has submitted the ICLA and we can migrate the licenses
to Apache.
Sebastien Lorquet has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
tcpip ok
update wifi demo configuration
fix tcpip input cause misalign fault
change some api definetions in nuttx
fix wifi manager strlen copy without suffix null character
fix 602 network buf allocation issue
wifi scan works
[ble] Add controller code
[BLE] Add nuttx adapt code for blecontroller .
[BLE] modified include file path, to fix cflag is too long.
[ble]Test ble peripheral pass, save code.
[ble] Organize the code
[BLE] Add blecontroller config for nuttx
[BLE] Add config for ble example
fix tcp lost packet when rx
support wpa3.
Copy default config from wifi default config. Create ble for local test and ble tester for autopts.
Add config for local test.
Add pts teset config for host test
Add config for mesh test
Create task to init blecontroller
Delete blecontroller rx thread.
using idle task to receive hci command from host
Set ble device name to /dev/ble, and fix code.
1.fix a ke schedule risk 2. CFG_HOST is enabled only in the case that CONFIG_BLE_HOST_DISABLE is not enabled, by lanlan
rm _sp_main stack.
change h/l workq_stack_size 6K
change l workq_stack_size 3K.
[ble] delete file_detach
color idle stack.
clear bl602 netdev code
SCAN is sorted according to RSSI
enlarge nsh command line buffer
fixup stack overflow check checkfail when startup
arch/risc-v/BL602:fix reboot cause crash
reboot default use romapi.
riscv/bl602:netdev support defered input, remove wifi_tx function
risc-v/bl602:fix sem_timedwait usage error in bl_cmds
risc-v/bl602:fix memory access out of bounds when copy ssid
remove ble and wifi source, download when build
add bl602 blob gitignore
risc-v/bl602:remove ble-pts defconfig
Fix some typos in NuttX style naming
Fix the replacement of tab to space
fix wlan interface down still receive packet
fix wapi crash, rx when ifdown,and ble_hci_rx_do
change system reset to rom dirver
change ble hci interval to 50ms
NuttX support wifi enable/disable log via KConfig
support country code configuration in Kconfig
fix ap tx not work
The GPIO example was also extended to include testing an interrupt pin.
Co-authored-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Co-authored-by: Alan Carvalho <alan.carvalho@espressif.com>
This commits adds support for the ESP32-C3 IO Mux and GPIO Matrix. It
also includes necessary board logic to run the GPIO example with 2
outputs.
Co-authored-by: Alan Carvalho <alan.carvalho@espressif.com>
Co-authored-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Modify the default configuration in KConfig.
Sync latest commit from mainline.
Remove unused demo configuration
fixup bl602 nsh defconfig cause CICD failed
Rebase from mainline code
So that it matches what the toolchain expects.
spacetanuki% riscv64-unknown-elf-gcc --version
riscv64-unknown-elf-gcc (SiFive GCC 8.3.0-2019.08.0) 8.3.0
Copyright (C) 2018 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
spacetanuki% riscv64-unknown-elf-gcc -dM -E - < /dev/null | grep UINT64_TYPE
#define __UINT64_TYPE__ long unsigned int
spacetanuki%
like other related macro(e.g. INTMAX_MIN, INTMAX_MAX...)
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I8863599960b1a9b1c22ae9c35735a379a4c745b0
To ensure size_t same as toolchain definition in the first place and rename CXX_NEWLONG to ARCH_SIZET_LONG. The change also check whether __SIZE_TYPE__ exist before CONFIG_ARCH_SIZET_LONG so our definition can align with toolchain(gcc/clang) definition automatically.
* include: Introduce elf64.h and elf.h
Added elf64.h for 64bit ELF support and moved common definitions
from elf32.h to elf.h. Also introduced Elf_xxx to be used in
common libraries such as binfmt.
* binfmt, include, modlib, module: Add support for ELF64
Elf_xxx must be used instead of Elf32_xxx to support ELF64.
To use ELF64, CONFIG_ELF_64BIT must be enabled.
* binfmt, modlib: Add support for relocate address
* arch: risc-v: Add include/elf.h
* libs: machine: Add risc-v related files.
NOTE: Currently only supports ELF64
* boards: maix-bit: Add elf and posix_spawn configurations
* boards: maix-bit: Add support for module configuration
Author: Alan Carvalho de Assis <acassis@gmail.com>
Run nxstyle against .c and .h files and fix it
Author: Juha Niskanen <juha.niskanen@haltian.com>
Fix typos and some incorrect comments
* arch: risc-v: Remove unused typedef for irqstate_t
NOTE: irqstate_t is defined in arch/risc-v/include/types.h
* arch: risc-v: Add typedef irqstate_t for __LP64__
* arch: risc-v: Add SMP support to K210 (RV64GC) processor
* boards: maxi-bit: Update READMEs and add smp/defconfig
In previous commit, mstatus.mie was set when creating a new task
but this change was incorrect and had a side effect such that
a machine interrupt would be enabled just before returning from
interrupt handling routine to switch context.
Also, mstatus.mpp is set to machine mode in up_get_newintctx()
instead of fe310_dispatch_irq().
* Simplify EINTR/ECANCEL error handling
1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx
* Unify the void cast usage
1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
Author: Gregory Nutt <gnutt@nuttx.org>
Run all .c and .h modified in PR through nxstyle.
Author: Masayuki Ishikawa <masayuki.ishikawa@gmail.com>
feature k210 (#16)
* arch: risc-v: Add support for __LP64__ to types.h
* arch: risc-v: Add support for RV64GC to common files
* arch: risc-v: Add support for Kendryte K210 processor (RV64GC)
* boards: risk-v: Add support for Sipeed Maix Bit with K210
* tools: Add support for Kendryte K210 processor
