sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
6,441 Commits 1 Branch 0 Tags 291 MiB
b9d5acf6e4
Commit Graph

1817 Commits

Author SHA1 Message Date
Gregory Nutt
12beaf4b1a Add a new method to the USB host driver interface: getdevinfo. This method will return information about the currently connected device. At present, it only returns the device speed. The speed is needed by the enumeration logic in order to set a credible initial EP0 max packet size 2013-08-26 15:46:16 -06:00
Gregory Nutt
463c40c42e ENCX24J600: Use the ENC's SRAM from multiple TX packets. From Max Holtzberg 2013-08-26 09:11:58 -06:00
Gregory Nutt
03ad60426d #17 Fix if CONFIG_SDIO_BLOCKSETUP defined, OS will crash. From CCTSAO 2013-08-26 08:54:46 -06:00
Gregory Nutt
65c32bea59 Fix an bug where long ROMFS file names are not read correctly. From Mike Smith 2013-08-25 16:58:41 -06:00
Gregory Nutt
70be601ea2 Add ENCX24J600 Ethernet driver and support for the ENCX24J600 with the Olimex STM32 P107 board. From Max Holtberg 2013-08-25 11:21:54 -06:00
Gregory Nutt
f1a20f49ff SAMA5 OHCI: Fix semaphore handling bug. OHCI is now function by itself again after changes to integrate with EHCI 2013-08-25 08:57:35 -06:00
Gregory Nutt
20b1b584e7 Network ARP harvesting: Corect backward condition in netmask task. From Max Holtzberg 2013-08-25 07:33:47 -06:00
Gregory Nutt
cd84d1bec4 SAMA5: EHCI now handles low- and full-speed connections by giving them to OHCI; OHCI now uses the work queue to defer interrupt processing; If both OHCI and EHCI are enabled, EHCI is the master of the UHPHS interrupt 2013-08-24 11:34:24 -06:00
Gregory Nutt
2d5313a931 Fix #endif with missing #if condition. Reported by Andrew Bradford 2013-08-23 16:40:30 -06:00
Gregory Nutt
db1b3c421b SourceForge bug #16 Fix IO pin map. Add CONFIG_SERIAL_TERMIOS support. From CCTSAO 2013-08-23 11:48:53 -06:00
Gregory Nutt
f356586fd3 SAMA5 EHCI: No complete for bulk and control endpoints 2013-08-22 13:36:16 -06:00
Gregory Nutt
320a2e2a0a Beginning of support for SAMA5 EHCI. Not much there yet 2013-08-20 15:46:36 -06:00
Gregory Nutt
19d7c90d4e USB host: Add device address management support in preparation for USB hub support 2013-08-18 14:31:57 -06:00
Gregory Nutt
dc07d65e14 STM32 F1 I2C: Fix a typo that crept in with some recent changes. From Yiran Liao 2013-08-18 07:45:14 -06:00
Gregory Nutt
e2f68ac85f Add EHCI header file (not quite complete) 2013-08-17 14:19:18 -06:00
Gregory Nutt
11086f34d0 SAMA5 OHCI: Driver is now basically functional 2013-08-16 13:13:21 -06:00
Gregory Nutt
10daf06976 STM32 SPI: nbits interface extended to handle LSB- or MSB-first operation. From Teemu Pirinen 2013-08-16 11:35:22 -06:00
Gregory Nutt
79d5239023 SAMA5 OHCI: Use physical address and flush and/or invalidate data caches as necessary 2013-08-14 12:23:06 -06:00
Gregory Nutt
3f4b90cc3b SAMA5: Major restructuring of the the OHCI driver drivers to better handle the multiple root hub ports and concureent transfers on each port. 2013-08-13 16:48:14 -06:00
Gregory Nutt
1700d06d89 Separate wait() and enumerate() methods from struct usbhost_driver_s and move to new interface, struct usbhost_connection_s. This is part of the necessary restructuring of the USB host interface to support multiple root hub ports. 2013-08-13 15:03:46 -06:00
Gregory Nutt
9220a748bd Fix re-entry problem in SAMA5 up_putc 2013-08-13 09:42:40 -06:00
Gregory Nutt
1ec49f08b4 STM32 F3 fixes from John Wharington 2013-08-13 07:48:18 -06:00
Gregory Nutt
120a3604c9 More changes to USB host interface to support multiple downstream ports 2013-08-12 16:29:33 -06:00
Gregory Nutt
a384129490 Convert olimex-stm32-p107/nsh configuration to use kconfig-frontends tool. From Max Holtzberg 2013-08-12 15:00:28 -06:00
Gregory Nutt
e09bd50fdd First of several changes needed to support multiple USB host root hubs 2013-08-12 14:44:06 -06:00
Gregory Nutt
0da218483d SAMA5: Add logic to control VBUS power for OHCI 2013-08-12 11:59:10 -06:00
Gregory Nutt
e2d7ab9487 SAMA5: Add support for initialization of the USB host and mass storage class 2013-08-11 17:52:36 -06:00
Gregory Nutt
ed49812d2c Add untested OHCI driver for the SAMA5; structure naming and header files for USB host initialization prototypes 2013-08-11 17:11:32 -06:00
Gregory Nutt
544185c683 Added option to disable STM32 serial port re-ordering 2013-08-10 19:29:44 -06:00
Gregory Nutt
0f20d4581b Added FIONREAD and FIONWRITE to CDC/ACM driver. From Lorenz Meier 2013-08-10 19:21:39 -06:00
Gregory Nutt
82b528e0c8 Serial FIONREAD, FIONWRITE, and TERMIOS I/O processing from Mike Smith, Andrew Tridgell, and and Lorenz Meier 2013-08-10 19:14:05 -06:00
Gregory Nutt
97e13b33ab MMC/SD SDIO: Correct return values when multiple block transfers are suppressed. From Andrew Tridgell via Lorenz Meier 2013-08-10 18:29:22 -06:00
Gregory Nutt
da4cebf572 SAMA5: Fix HSMCI race condition. Now memory card interface is functional with DMA 2013-08-10 18:01:23 -06:00
Gregory Nutt
efabe4aaff SAMA5: Centralize logic for conversion between physical and virtual addresses 2013-08-09 17:25:53 -06:00
Gregory Nutt
619cd66f33 Fix some cache-related issues with the SAMA5 DMA driver 2013-08-09 15:25:13 -06:00
Gregory Nutt
bfaf64e54e Fix SAM bug: Parmaters reversed in DMA function call 2013-08-06 15:47:09 -06:00
Gregory Nutt
b0e8231fa3 SAM3,4,A5 DMAC driver fixes 2013-08-06 13:27:48 -06:00
Gregory Nutt
6a429e675f SAM3,4,A5: Fix some masked status checks that can generate false error reports 2013-08-06 12:36:56 -06:00
Gregory Nutt
fa011d9aca SAMA5: Add PIO interrupt support. Massive name changes for consistency in PIO vs GPIO naming. SAMA5D3x-EK: Add support for SD card detection PIO interrupts 2013-08-06 10:20:17 -06:00
Gregory Nutt
369bf26b20 SAMA5: Add HSMCI memory card driver support 2013-08-05 16:21:24 -06:00
Gregory Nutt
8c88dcd0c7 SAMA5: SPI Driver + AT25 FLASH work; SAM3/4: Correct an error, SPI will not be correctly configured if CONFIG_SPI_OWNBUS=n 2013-08-05 10:29:43 -06:00
Gregory Nutt
cbe8c5ed56 SAMA5: Add logic to auto-mount a file system on AT25 SPI FLASH for NSH 2013-08-05 08:24:39 -06:00
Gregory Nutt
906506c61c SAMA5D3x-EK: At support for the AT25 serial FLASH 2013-08-04 16:56:41 -06:00
Gregory Nutt
1060b232e9 SAMA5: Add register level debug option for SPI 2013-08-04 14:45:24 -06:00
Gregory Nutt
83af194db1 SAMA5: SPI driver now supports both SPI0 and SPI1 2013-08-04 12:50:20 -06:00
Gregory Nutt
163ec613b1 SAMA5: Add basic SPI suppport (untested) 2013-08-04 11:08:20 -06:00
Gregory Nutt
1ea55fc2a7 SAMA5: Add DMA suppport (untested) 2013-08-04 10:44:18 -06:00
Gregory Nutt
5cdc3db214 SAMA5: Add DMA controller register definitions 2013-08-03 12:13:42 -06:00
Gregory Nutt
6422792f57 Standard configuration variables used to enable interupt controller debug; SAMA5: Correct handling of spurious interrupts 2013-08-03 08:22:37 -06:00
Gregory Nutt
3ee10f0f08 Correct some typos int he MPADDRCS register address definitions 2013-08-02 12:06:11 -06:00
Gregory Nutt
2feb83a2f8 SAMA5: More MMU-related changes to properly initialize SDRAM 2013-08-02 11:11:57 -06:00
Gregory Nutt
2ac9669a87 SAMA5: Add logic to initialize SAMA5D3x-EK on-board SDRAM 2013-08-01 16:58:55 -06:00
Gregory Nutt
8b8fe4d073 SAMA5: Add DDR controller register definitions 2013-08-01 12:27:41 -06:00
Gregory Nutt
b148465beb ARMv7-A: Map all of .text, .bss, .data., stacks before enabling the MMU and caching. This is simpler and avoids fears I have about caching 2013-08-01 10:05:33 -06:00
Gregory Nutt
f2195a16b2 ARMv7-A: Separate CONFIG_PAGING start-up logic into a different startup file. Too much conditional compilation. 2013-08-01 07:41:00 -06:00
Gregory Nutt
8b44b8fce7 Prep for NuttX-6.29 release 2013-07-31 14:25:06 -06:00
Gregory Nutt
ffdd034c35 SAMA5: Add an NSH configuration of the SAMA5D3x-EK board 2013-07-31 10:46:13 -06:00
Gregory Nutt
2c6b370c4a Add ARMv7-A irqdisable() inline function 2013-07-30 11:37:09 -06:00
Gregory Nutt
5a94767c52 STM32 F3 I2C driver from John Wharington 2013-07-30 10:35:17 -06:00
Gregory Nutt
b57f54fbd0 STM32 DAC DMA fixes from John Wharington 2013-07-30 08:54:32 -06:00
Gregory Nutt
36b1cd0a6b SAMA5: Separate cache operations into separate files 2013-07-29 18:38:02 -06:00
Gregory Nutt
1728594259 SAMA5: Add a little NuttX debug program to help debugger programs in NOR flash 2013-07-29 13:57:32 -06:00
Gregory Nutt
f96c6793b9 Add SAMA5 HSMC register definitions and logic to reconfigure the NOR FLASH 2013-07-29 10:56:21 -06:00
Gregory Nutt
4ba648aaae SAMA5: Add file structure to support board-specific initialization of NOR flash 2013-07-29 07:41:53 -06:00
Gregory Nutt
9a94a3707c SAMA5: The ostest configuration have been converted to run out of NOR flash. There is more to be done, however 2013-07-28 15:07:35 -06:00
Gregory Nutt
7dc8dd4b50 SAMA5: Correct a clock configuration bug; clarify some MMU memory types 2013-07-28 12:44:06 -06:00
Gregory Nutt
dc92037e67 Add a hello world configuration to help with the SAMA5 bringup 2013-07-26 15:28:01 -06:00
Gregory Nutt
70f0ffdfc5 Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_ 2013-07-26 10:09:17 -06:00
Gregory Nutt
55df28dbcf Fix an uninitialized register error that crept into the ARM9 start up code many years ago and was recently cloned into the Cortex-A5. Obviously no on has used NuttX with ARM9 for years 2013-07-24 20:12:04 -06:00
Gregory Nutt
77e1c27005 Update SAMA5D3x-EK board configuration to support on-board UART connections, LEDs, and push buttons 2013-07-24 12:27:12 -06:00
Gregory Nutt
04b3bb1826 Revamp the way external memory regions are configured; Add logic to add SAMA5 external memory regions to the heap 2013-07-24 10:08:32 -06:00
Gregory Nutt
535048a73c Improve some ARMv7-A/M floating point register save time; Add floating point register save logic for ARMv7-A 2013-07-23 17:52:06 -06:00
Gregory Nutt
812bf02972 ARMv7-A: Need 8-byte stack alignment when callign C code from interrupt handlers. This change needs to be ported to other ARM architectures as well 2013-07-23 14:47:16 -06:00
Gregory Nutt
14df812735 SAMA5: Adapt clocking for different boot modes. New header files for AXI matrix, BSC, and SFR 2013-07-23 13:54:49 -06:00
Gregory Nutt
afdd6320ee Add SAMA5D3 pin multiplexing definitions 2013-07-23 09:47:01 -06:00
Gregory Nutt
f07d09aa48 Add SAMA5 GPIO configuration support 2013-07-22 20:59:47 -06:00
Gregory Nutt
339a55f1ea Add support SAMA5 UART and serial driver 2013-07-22 19:16:37 -06:00
Gregory Nutt
e67d610347 SAMA5 clock configuration should now agree with Atmel sample code; Added header file with macros to enable and disable peripheral clocking 2013-07-22 17:00:02 -06:00
Gregory Nutt
a9b0f304e6 Add SAMA5 clock logic. Cloned from SAM3U and not yet verified 2013-07-22 14:42:05 -06:00
Gregory Nutt
1350b2a576 SAMA5 interrupt handling logic 2013-07-22 11:54:39 -06:00
Gregory Nutt
87f54f7d0b Add system timer logic for the SAMA5 2013-07-21 15:49:17 -06:00
Gregory Nutt
543b5b7e03 A few more Cortex-A5 and SAMA5 files 2013-07-21 12:52:38 -06:00
Gregory Nutt
66259bfc53 Misc Cortex-A5 changes include new file for cache operations 2013-07-20 13:06:00 -06:00
Gregory Nutt
4a81d47c86 Basic framework to support the AT91SAMA5D3 family and the SAMA5D3x-EK board(s) in particular 2013-07-19 15:23:03 -06:00
Gregory Nutt
8f2ad7eec1 Some initial frame for Cortex-A5 support. No much yet 2013-07-18 15:20:47 -06:00
Gregory Nutt
c960273afd Build/test framework for the Zmodem sz and rz commands which are on their way 2013-07-12 16:01:37 -06:00
Gregory Nutt
352c313fa7 Fix typo/compilation error with USB device DMA memory allocation is enabled 2013-07-12 07:09:24 -06:00
Gregory Nutt
c6b141d190 Fix typoes in drivers/rwbuffer.c from Chia Cheng Tsao 2013-07-09 07:59:28 -06:00
Gregory Nutt
7536b4654b Ticket #16: STM32 OTG FS device driver endpoint allocation. From Chia Cheng Tsao 2013-07-08 08:55:05 -06:00
Gregory Nutt
4d8a4b69a4 Add CRC16 support 2013-07-07 17:35:35 -06:00
Gregory Nutt
25c393f371 prohibit re-entrance into sam_configgpio() 2013-07-05 17:15:54 -06:00
Gregory Nutt
37ed44a1ee Fix type in the USB composite device driver 2013-07-04 07:47:32 -06:00
Gregory Nutt
94e2f4ceb4 Fix SAM34 interrupt handling for ports D-F; fix MISO logic in Arduino Due touchscreen driver 2013-07-03 08:12:45 -06:00
Gregory Nutt
e1dab23711 Add a general bit-bang SPI lower-half driver and implement the bit-bang driver for the Arduino ITEAD TFT shield 2013-07-01 16:50:16 -06:00
Gregory Nutt
8b68ea2f94 Add a general bit-bang SPI upper-half driver 2013-07-01 12:23:26 -06:00
Gregory Nutt
09faaccc02 Created new directories to hold SPI-related files 2013-07-01 08:11:54 -06:00
Gregory Nutt
8ba8ad39f9 SAM3U-EK touchscreen is now functional; created an NxWM configuration to test it further 2013-06-28 17:07:58 -06:00
Gregory Nutt
2ba00060bc SAM33/4: Need to disable write protection before modify PIO pin configuration 2013-06-28 15:34:51 -06:00
Gregory Nutt
3505ca7556 Add an NSH configuration for the Arduino Due; Pluse several fixes related to the Due and to the SAM3X in general 2013-06-28 14:32:08 -06:00
Gregory Nutt
e0310e2cc8 Flesh out the Arduino Due board configuratino and integrate it with the build and configuration system 2013-06-27 14:24:27 -06:00
Gregory Nutt
bc7ac20616 Add peripheral configuration logic for the SAM3X/3A; Change all references to SAM3/4 SPI to SPI0 for compatibity with the SAM3X/3A which has SPI0 and SPI1; Add directory which will eventually holdl an Arduino Due port 2013-06-26 18:46:44 -06:00
Gregory Nutt
d4b7efb34e Add SAM3X/3A pin multiplexing and GPIO encoding header files 2013-06-26 17:02:43 -06:00
Gregory Nutt
f668abaed1 Add SAM3X/3A memory map 2013-06-26 14:37:57 -06:00
Gregory Nutt
3692dfaf26 Add SAM3X/3A peripheral clock controls 2013-06-26 14:00:26 -06:00
Gregory Nutt
b089263e1c Add SAM3X/3A interrupt vectors 2013-06-26 12:59:56 -06:00
Gregory Nutt
18240b07b6 Add support for SAM3X and 3A chips, interrupts, and peripheral IDs 2013-06-26 12:28:32 -06:00
Gregory Nutt
450862a944 Add support fo SAM4S Xplained SRAM 2013-06-26 10:57:25 -06:00
Gregory Nutt
3d1f29217e Add support for a separate CCM memory allocator for members of the STM32 family that support CCM memory 2013-06-25 09:13:30 -06:00
Gregory Nutt
3d975e0a08 Fix UG-2832HSWEG04 landscape. Add reverse landscape support to UG_2864AMBAG01 and UG-9964HSWAG01. Fixe NXHELLO default colors for 1-bit mono modes 2013-06-24 12:37:02 -06:00
Gregory Nutt
d11050e978 Add support for the UG-2843HHSWEG04 OLED and for the SAM4L Xplained Pro OLED module that uses that OLED. 2013-06-23 14:39:56 -06:00
Gregory Nutt
8959fffedc SAM4L Xplained SLCD driver is complete 2013-06-23 09:05:20 -06:00
Gregory Nutt
d7ec0089a7 Fix for ENC28J60 from Dave 2013-06-22 08:55:16 -06:00
Gregory Nutt
5152ce9f79 Beginning of a driver for the SAM4L LED1 module 2013-06-21 17:42:09 -06:00
Gregory Nutt
add0a67995 Straighten out issues about who calls C++ initializers with CXXTEST or HELLOXX are built as NSH applications; Add an ofstream test to CXXTEST suggested by Michael; Update many defconfig fiels to that they set configurations to handle C++ constructors just as before these configuration changes 2013-06-21 09:32:57 -06:00
Gregory Nutt
b14f0cf9f7 KL25Z GPIO register dump function now compiles 2013-06-20 18:00:56 -06:00
Gregory Nutt
d5a0c75bbb Add framework for managing SPI-related discretes on the Freedom KL25Z board. 2013-06-20 13:50:16 -06:00
Gregory Nutt
2cfeed654a Add SAM4L PDCA register definition file 2013-06-19 18:38:31 -06:00
Gregory Nutt
3ed35802ce SPI register definition file updated to include a few differences for the SAM4L 2013-06-19 16:03:19 -06:00
Gregory Nutt
2ede49fd6a SAM4L LCDCS register definitions 2013-06-19 13:59:47 -06:00
Gregory Nutt
2a2de71b5d Add SPI driver for the Freescale KL25Z 2013-06-19 12:10:01 -06:00
Gregory Nutt
f597172733 Add SPI register definitions for the Freescale KL25Z 2013-06-19 09:56:32 -06:00
Gregory Nutt
69fc11bb71 Fix test of NULL pointer in the SAM3/4 SPI driver 2013-06-18 12:16:52 -06:00
Gregory Nutt
177a8c0e9b Freescale KL25Z support from Alan Carvalho de Assis 2013-06-18 11:20:57 -06:00
Gregory Nutt
39dcedb0f1 SAM3/4 SPI phase control (CPHA) is inverted 2013-06-18 09:29:55 -06:00
Gregory Nutt
15e846ad1d Corrections to the Kinetis TSI header file from Alan Carvalho de Assis 2013-06-18 07:14:05 -06:00
Gregory Nutt
b9ad057972 MMC/SD driver needs to manage SPI mode and data width as well 2013-06-17 12:31:24 -06:00
Gregory Nutt
8db5d403ee SAM3U-EK board now runs at 96MHz 2013-06-17 08:41:52 -06:00
Gregory Nutt
c9f1d1857c SAM3U-EK: Correct polarity of the PENIRQ signal 2013-06-16 14:31:18 -06:00
Gregory Nutt
c7fd7a4e27 Re-architected SAM3/4 SPI interface; Change BUSY bit handling in the ADS7843E driver 2013-06-16 10:09:21 -06:00
Gregory Nutt
44fe999aea Add support for the SAM4L Xplained Pro I/O1 module 2013-06-15 10:56:08 -06:00
Gregory Nutt
aaf102b5c8 Prep for 6.28 release 2013-06-14 14:30:00 -06:00
Gregory Nutt
1f056e3826 Add support for a generic windows-based EABI toolchain; Add NX configuration to force default NXTK border colors 2013-06-13 11:04:18 -06:00
Gregory Nutt
83ecc03d17 Remove CONFIG_XYZ_BUILTIN configurations, replace with the single CONFIG_NSH_BUILTIN_APPS. Add SAM3/4 sam_periphclks.h which is just a header file that includes the right header file. Misc SAM3U-EK cleanup 2013-06-12 17:32:00 -06:00
Gregory Nutt
fa45b86b4d SAM4S: Add NSH configuration. Calibrated delay loops. Port now seems fully functional 2013-06-12 10:56:42 -06:00
Gregory Nutt
1ca5db1ebc Changes for a clean build of configs/sam4s-xplained 2013-06-11 17:33:43 -06:00
Gregory Nutt
54c777ef0d SAM4S: Add macros to manage peripheral clocks 2013-06-11 15:42:30 -06:00
Gregory Nutt
03698ca7e2 SAM4S: Add pin multiplexing definitions 2013-06-11 14:32:07 -06:00
Gregory Nutt
ce8b9c0d3c SAM4S: GPIO, chip characteristics, peripheral Kconfig 2013-06-11 12:28:31 -06:00
Gregory Nutt
da0526f0bd Add a directory to hold configurations for the SAM4S Xplained board 2013-06-10 18:20:30 -06:00
Gregory Nutt
bafe910ce4 SAM4S: Add memory map and interrupt logic 2013-06-10 16:18:47 -06:00
Gregory Nutt
76867c132e Beginning updates of SAM3U header files o include support for the SAM4S: WDT, SUPC, EEFC, MATRIX, and PMC 2013-06-10 11:57:37 -06:00
Gregory Nutt
3938eeeb96 SAM4L: Extend interrupt support for the larger number of NVIC interrupts of the SAM4L 2013-06-09 13:00:38 -06:00
Gregory Nutt
3eefc08c12 SAM4L: Add an NSH configuration and C++ support 2013-06-09 11:43:20 -06:00
Gregory Nutt
cc8906e701 SAM3U/4L changes to hide differences by clocking in those MCUs 2013-06-08 13:50:42 -06:00
Gregory Nutt
88226dd5b1 SAM4L: Add USART/UART register definition header files 2013-06-08 11:39:06 -06:00
Gregory Nutt
fe868bc8b2 SM4L: USB clock configuration and WDT register definition file 2013-06-08 09:21:20 -06:00
Gregory Nutt
2864dfac0d Add SAM4L BSCIF register definition file 2013-06-06 16:24:33 -06:00
Gregory Nutt
168702f7e1 Fix a backward conditional that cause the STM32 usb host driver to fail to detect disconnection events. From Scott 2013-06-06 15:00:18 -06:00
Gregory Nutt
3edec35c51 Add flow control support to the STM32 serial driver; Fix some issues with UART2 and 5. From Lorenz Meier and Mike Smith 2013-06-06 14:49:14 -06:00
Gregory Nutt
e352d4f3ad Add register definitions for SAM4L BPM and SCIF blocks; SAM4L clock initialization now selects an optimal power scaling mode 2013-06-06 11:18:52 -06:00
Gregory Nutt
93b67f1598 Move SAM4L peripheral clock logic to a separate file 2013-06-05 18:48:30 -06:00
Gregory Nutt
19b38fa95f Add power management register defintions and clock control logic for the SAM4L 2013-06-05 13:35:19 -06:00
Gregory Nutt
efce99ba6f SAM4L GPIO port addressing fixes; SAM4L Xplained LED support; minor documentation updates 2013-06-05 08:54:37 -06:00
Gregory Nutt
7ddaf6efc7 Add SAM4L GPIO driver 2013-06-04 15:12:56 -06:00
Gregory Nutt
e35d569477 Create SAM4L GPIO driver header file 2013-06-04 13:33:30 -06:00
Gregory Nutt
1d8c8c0999 If CONFIG_STM32_DMACAPABLE is defined, use stm32_dmacapable to workaround attempt SPI DMAs from the CCM stack 2013-06-04 09:05:39 -06:00
Gregory Nutt
e023ccf016 Add stm32_dmacapable interface to determine is it is possible to perform DMA from a given address. 2013-06-04 08:44:49 -06:00
Gregory Nutt
29de68525d SAM4L alternate pin mapping header file; Use USART1 for virtual COM port console 2013-06-03 17:53:05 -06:00
Gregory Nutt
a732e03139 Add a skeleton configuration that will eventually support the SAM4L Xplained Pro board 2013-06-03 15:11:56 -06:00
Gregory Nutt
081d3f989d Add vector and chip cability definitions for the SAM4L family 2013-06-03 11:23:41 -06:00
Gregory Nutt
3613d6ed8b Add interrupt and memory map definitions for the AT91SAM4L 2013-06-03 09:32:04 -06:00
Gregory Nutt
961837eaaf Fix an assertion 2013-06-02 16:49:41 -06:00
Gregory Nutt
44450511d4 Add dprintf() and vdprintf() 2013-06-02 15:49:52 -06:00
Gregory Nutt
5f97fb8041 Rename sam3u/ architecture directories to sam34/ to include the SAM4L 2013-06-02 13:57:22 -06:00
Gregory Nutt
7bfa4e299c Add missing NSH configuration settings. Correct some conditional logic for STM32 FALSH pre-fetch settings. From Lorenz Meier 2013-06-02 13:16:35 -06:00
Gregory Nutt
b20b0a1839 Eliminated sam3u_internal.h. Use separate header files instead. More renaming from sam3u_ to sam_ to make room in the namespce for the sam4l_ 2013-06-02 13:04:40 -06:00
Gregory Nutt
28c64c90bd Move SAM3U header files to arch/arm/src/sam3u/chip. Some renaming of SAM3U to SAM to ssupport SAM4. Convert all configs/sam3u-ek configurations to use the kconfig-frontends tool 2013-06-02 10:33:57 -06:00
Gregory Nutt
617ddcc103 Add NRF24L01 terminal example. From Laurent Latil. 2013-06-01 08:23:06 -06:00
Gregory Nutt
0e37ec1bfc Add NSRF42L01 driver. From Laurent Latil 2013-06-01 08:03:55 -06:00
Gregory Nutt
7554d2888e Upate .gitignore files. Add .dSYM. Make sure / is present where needed. Add some missing .gitignore files 2013-05-30 14:45:31 -06:00
Gregory Nutt
aa9589ac8f Fix STM32F1 and F3 USB device driver. It was not handling NULL packets correctly and it prevent use of the driver with the CDC/ACM class 2013-05-29 10:26:00 -06:00
Gregory Nutt
680e570cc4 Add support for the STM32 Tiny development board from Laurent Latil 2013-05-28 14:24:17 -06:00
Gregory Nutt
6d3a292f02 Fix null packet handling in the PIC32 USB device driver. This is a critical bug fix for PIC32. Add support for the USB monitor to the Sure-PIC32MX configuration 2013-05-28 13:36:01 -06:00
Gregory Nutt
b97a816998 The SLCD driver is now fully functional for Sure PIC32MX board 2013-05-27 11:39:13 -06:00
Gregory Nutt
157789e373 Rename SLCD geometry tructure to attributes; Move MAX contrast to attributes. Add attribute and ioctl commands to get and set SLCD brightness 2013-05-27 07:26:59 -06:00
Gregory Nutt
d4e7f7fa94 Converted all configurations to use the kconfig-frontends tools, cleaned up the directory structure and naming to match some of the more recent configurations, and added a segment LCD driver for the board. The initial checkin of the LCD driver is just a clone of configs/pcblogic-pic32mx/src/pic32mx_lcd1602 and it not yet expected to be functional. 2013-05-26 16:44:53 -06:00
Gregory Nutt
777e0c5da0 Extentions SCLD test; SCLD CODEC and LCD1602 driver bug fixes 2013-05-26 09:28:57 -06:00
Gregory Nutt
3cbb22038a PCB-Logic PIC32MX LCD1602 driver now supports SLCD CODED; Added an SLCD ioctl command to get cursor position 2013-05-25 13:46:43 -06:00
Gregory Nutt
a3c1949963 Converted configs/pcblogic-pic32mx configurations to use kconfig-frontends. Re-organization of files in configs/pcblogic-pic32mx/src 2013-05-25 11:53:49 -06:00
Gregory Nutt
bc4e519042 Additional bug fixes and minor extensions to the STM32L-Disovery segment LCD support and to the apps/examples/slcd segment LCD test. 2013-05-24 12:00:15 -06:00
Gregory Nutt
5bb3a187ef Add apps/examples/slcd, Remove USB from STM32L-Discovery, LSE support for the STM32 L family, some STM32L-Discovery LCD debug changes 2013-05-24 10:00:54 -06:00
Gregory Nutt
4da4094c0d Add SLCD ioctl commands 2013-05-23 18:25:02 -06:00
Gregory Nutt
d69228b5f7 poll again; if fd is less than zero, it should set revents to zero, not POLLNVAL 2013-05-23 15:41:15 -06:00
Gregory Nutt
abf8c8a13a STM32L-Discovery LCD driver is code compele but untested 2013-05-23 15:23:29 -06:00
Gregory Nutt
c1f6d50093 Add logic to encode/decode special SLCD actions 2013-05-23 10:23:41 -06:00
Gregory Nutt
b5dd706120 poll needs to set POLLNVAL if file descriptor is bad 2013-05-23 07:48:32 -06:00
Gregory Nutt
9d280a58aa When readahead data is available, poll needs to return POLLIN or POLLRDNORM, not POLLOUT 2013-05-23 07:16:46 -06:00
Gregory Nutt
16d04c7aa7 poll should ignore invalid file descriptors 2013-05-23 07:02:44 -06:00
Gregory Nutt
eb35cbf558 Beginning of a segment LCD driver for the STM32L-Discovery 2013-05-22 18:12:54 -06:00
Gregory Nutt
5de77eefcb Add TCP echo example for the LM3S6965-EK. From Max Holtzberg 2013-05-22 07:45:03 -06:00
Gregory Nutt
afa905fc15 Audio subystem update from Ken Pettit. Plus moved some header files 2013-05-21 13:13:05 -06:00
Gregory Nutt
2941b673fd Add UDP discovery example for the LM3S6965-EK. From Max Holtberg 2013-05-21 12:51:27 -06:00
Gregory Nutt
28112cea0f Add STM32L15X segment LCD register definitions; Updated documentatin and README files 2013-05-21 12:39:48 -06:00
Gregory Nutt
e4d906960a Fix STM32L15X vector definitions; Fix STM32L-Discovery LED controls. The NSH configuration is now fully functional on the STM32L-Discovery board. 2013-05-21 11:25:30 -06:00
Gregory Nutt
b475e965a6 Internal FLASH MTD driver for TI/Stellaris from Max Holtzberg 2013-05-20 12:47:54 -06:00
Gregory Nutt
5b86207177 Add audio/ sub-syste, include/nuttx/audio.h interface, and drivers/audio/vs1053.c driver to NuttX. From Ken Pettit 2013-05-19 15:12:28 -06:00
Gregory Nutt
d581b9a849 Fixes for typos and errors in audio.h from Ken Pettit 2013-05-19 15:01:14 -06:00
Gregory Nutt
c193d3fad3 Add STM32L152X RCC PLL and FLASH support. Now compiles errorfree. 2013-05-19 14:35:30 -06:00
Gregory Nutt
63679d05a6 STM32L15X UART, DMA, and heap initialization support 2013-05-19 11:54:56 -06:00
Gregory Nutt
5d80dfd129 Add SYSCFG definitions for STM32L152; Add board support STM32L-Discovery 2013-05-19 11:04:19 -06:00
Gregory Nutt
e5b21a96d4 Add PWR and RCC register definitions for the STM32F152 2013-05-19 08:55:36 -06:00
Gregory Nutt
66b8913e18 Add STM32L15X memory map 2013-05-18 16:08:28 -06:00
Gregory Nutt
97844b79a1 Add support for STM32L15X GPIOs 2013-05-18 15:32:50 -06:00
Gregory Nutt
96b91d5dc7 Support for STM32L15xx interrupt vectors 2013-05-18 12:56:03 -06:00
Gregory Nutt
7629593f72 Begnning of support for the STM32L15X family 2013-05-18 11:15:37 -06:00
Gregory Nutt
ae75e9c4fb Add kernel build support and a kernel most OS test example for the Mikroe STM32 M4 board. From Ken Pettit 2013-05-17 14:59:21 -06:00
Gregory Nutt
113a696f31 Fix compile errors when the on_exit() interface is enabled in the kernel build. From Ken Pettit 2013-05-17 11:21:29 -06:00
Gregory Nutt
b80707ea78 Add support for R61505U LCD controller on HY-mini STM32v board 2013-05-16 14:06:16 -06:00
Gregory Nutt
c5d613dc6a Updated to hymini-stm32v configuration from Laurent Latil 2013-05-15 16:33:49 -06:00
Gregory Nutt
9de230d9a3 Fix STM32 F1 DMA register definitions. From Laurent Latil. 2013-05-15 16:11:16 -06:00
Gregory Nutt
afa05e4c9b hymini-stm32v: Remove nx and nxlines configurations 2013-05-14 08:32:13 -06:00
Gregory Nutt
708a46fb25 hymini-stm32v: Add OS test and USB/NSH configuration; Add card detect interrupt support 2013-05-14 08:26:40 -06:00
Gregory Nutt
d6887c178b configs/hymini-stm32v converted nsh and nsh2 configs to use kconfig-frontends tools; Also converted to use the common SSD1289 driver 2013-05-14 08:19:20 -06:00
Gregory Nutt
7e8d1dff8c Default NxWidgets and NxWM priorities should be 100 not 50 to be consistent with other default priorities 2013-05-12 14:31:41 -06:00
Gregory Nutt
70f0b986f7 Changes to get the Mikroe STM32F4 touchscreen working from Ken Pettit 2013-05-11 16:04:47 -06:00
Gregory Nutt
2072052db9 Update Olimex-LPC1766STK scripts to use OpenOCD-0.7.0 2013-05-10 10:37:45 -06:00
Gregory Nutt
c9fcc7eef4 Fix typo is STM32 ADC driver for F2 and F4: ADC not ACD 2013-05-08 21:45:46 -06:00
Gregory Nutt
44dc7c713b Fix for lpc17xx i2c single byte read timeout error problem from M.Kannan 2013-05-08 06:57:55 -06:00
Gregory Nutt
84b2c77a63 configs/mikroe-stm32f4: Add new configurations plus support for the MIO283QT2 display from Ken Pettit 2013-05-07 14:34:09 -06:00
Gregory Nutt
24368a6581 STM32 option to disable sleep to prevent disconnection of debugger 2013-05-07 14:10:34 -06:00
Gregory Nutt
fae527deef The Kinetis GPIO logic had some of the same issues as did the Kinetis L 2013-05-06 11:49:28 -06:00
Gregory Nutt
7628d3aa57 Fixes LEDs on the Freedom KL25Z board 2013-05-06 11:07:53 -06:00
Gregory Nutt
337680e346 mio283qt2.c: Need select/deselect LCD in setpower method; hwinitialize did not deselect LCD 2013-05-06 08:34:53 -06:00
Gregory Nutt
f1298f03a1 Convert configs/pirelli_dpl10/nsh_highram to use the kconfig-frontends tools 2013-05-05 10:38:02 -06:00
Gregory Nutt
ca5641f2d7 Make Pirelli-DLP10 a true board configuration; Calypso no compiles without errors 2013-05-05 09:10:47 -06:00
Gregory Nutt
4ac0990853 Add configuration for the Pirelli DP10 phone 2013-05-04 17:57:02 -06:00
Gregory Nutt
72179b7773 Rearchitecting of some MTD, partition, SMART interfaces, and FLASH drivers to: Better use the byte write capbility when available and to use smaller erase sectors for the erase sector size when available). 2013-05-03 12:52:33 -06:00
Gregory Nutt
b934926bd2 Repartitioning of header files for Kinetis L 2013-05-02 09:24:36 -06:00
Gregory Nutt
4f15d37b62 Add support for the byte write method to MTD partition logic; Beef up the MTD partition test -- and fix resulting bugs detected 2013-05-02 08:07:42 -06:00
Gregory Nutt
1cf695cbec Freedom KL25Z pin mux'ing fixes from Alan Carvalho de Assis 2013-05-02 06:08:50 -06:00
Gregory Nutt
99c2cfc168 Add an optional byte-oriented write method to the MTD interface 2013-05-01 10:59:57 -06:00
Gregory Nutt
7ed7749a40 Add Ken Pettit's SMART FS 2013-04-30 20:13:30 -06:00
Gregory Nutt
c73bd9b906 Add support for the MikroElektronika Mikromedia for STM32F4 development board. From Ken Petit 2013-04-30 18:31:47 -06:00
Gregory Nutt
f9be47ead2 Add configuration and example to test MTD partitions 2013-04-30 15:54:02 -06:00
Gregory Nutt
4d4ece78af Add MTD partition support plus fix some typos in comments 2013-04-30 12:37:34 -06:00
Gregory Nutt
c9d98ea46c Implement UDP sendto() timeouts. Currently disabled because it probably unnecessary. 2013-04-30 08:12:54 -06:00
Gregory Nutt
fad8a2b555 LPC17: Interrupts not being re-enabled in the initialization function 2013-04-30 08:08:02 -06:00
Gregory Nutt
efae204784 Fix minor typos 2013-04-28 12:00:34 -06:00
Gregory Nutt
35360712f5 Prep for NuttX-6.27 release 2013-04-28 10:56:29 -06:00
Gregory Nutt
1f616ecf1f Move task_terminate to its own C file to prevent drawing task_delete into the link 2013-04-25 16:23:30 -06:00
Gregory Nutt
b630e6a153 Useless TIOCSERGSTRUCT logic in most serial drivers is not compiled unless CONFIG_DEBUG and CONFIG_SERIAL_TIOCSERGSTRUCT are defined 2013-04-25 15:52:48 -06:00
Gregory Nutt
86b815373a Remove up_assert_code 2013-04-25 15:19:59 -06:00
Gregory Nutt
2b411b516a KL25Z: Fix serial driver; freedom-kl25z/nsh configuration now works 2013-04-25 10:23:47 -06:00
Gregory Nutt
50d1a961bc KL25Z: Fix some memory mapp and register definitions; no UART3-5 2013-04-25 09:06:58 -06:00
Gregory Nutt
2e04ad2608 Fix KL25Z clock definitions in board.h 2013-04-24 18:29:26 -06:00
Gregory Nutt
69d3978837 Adding missing registration of /dev/zero; Condition registration of /dev/null. From Ken Petit 2013-04-24 07:17:49 -06:00
Gregory Nutt
927dd57ef2 Reviewed all task exit logic. For pthread_exit() moved some logic higher in the exit sequence that could be required to block. For lower level logic kicked off by _exit(), add logic to prevent blocking when the task is not in a healthy state. 2013-04-23 16:41:43 -06:00
Gregory Nutt
57d31176c0 kconfig2html: Improve expand/collapse TOC + misc bug-fixes 2013-04-23 11:01:18 -06:00
Gregory Nutt
a8e2ff3420 Correction to ARM RAM vectors logic from Paul Y. Zhang 2013-04-23 09:32:11 -06:00
Gregory Nutt
e53e9501eb zkit-arm-1769 ADC and SPI/USB MSC updates from MKannan 2013-04-23 08:54:03 -06:00