sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
11,620 Commits 1 Branch 0 Tags 291 MiB
ba55e8c7d8
Commit Graph

3938 Commits

Author SHA1 Message Date
Gregory Nutt
fabd892d3a SAM4L: Fix some issues from loast commit. Now running off DFLL with source clock = XOSCK32K 2015-05-26 13:25:39 -06:00
Gregory Nutt
315eb4b491 SAML21-Xlplained: Add options to enable XOSC32K and to use it as the DFLL source; NSH configure now uses DFLL with OSC16M source 2015-05-26 10:39:38 -06:00
Gregory Nutt
6e3fdea1a6 Logic that samples the free running counter reads the pending interrupt status regsiter and can cause interrupts to be lost. So, if when the status regsiter is read, the logic must also handle the timer overflow event. Found and fixed by Max Neklyudov 2015-05-26 08:09:10 -06:00
Gregory Nutt
49d999f9d4 SAMD20: Fixes the problem introduced with the SAML21 integration 2015-05-25 10:13:06 -06:00
Gregory Nutt
7e3508361f SAML21: Fix issue with open loop operation; Add configuration options to select clock source 2015-05-24 10:27:37 -06:00
Gregory Nutt
a9b3fea3ca LPC11xx: Use offsets instead of absolute address in look-up tables. This saves about 156 bytes of FLASH. From Alan Carvalho de Assis. 2015-05-24 07:49:38 -06:00
Gregory Nutt
4adda9d428 Fix numerous typos in configuration variable names. Tracked down by Alan Carvalho de Assis 2015-05-23 17:08:35 -06:00
Gregory Nutt
67380a335f SAML21: Add missing support for GCLK8 2015-05-23 17:02:13 -06:00
Gregory Nutt
fa585b66a3 SAML21: Several SERCOM fixes. No gets UART output, but at the wrong BAUD 2015-05-23 13:08:28 -06:00
Gregory Nutt
7b7da5ded4 SAM4L: Re-order some clock initialization. There was a dependency of GCLK0 on DFLL, but DFLL was being enabled after GCLK0 2015-05-23 11:01:22 -06:00
Gregory Nutt
b246e7adf2 SAML21: Fix some register definitions; board OSC16M frequency 2015-05-23 10:54:51 -06:00
Gregory Nutt
0607441b95 LPC11xx: Add support for up_getc() which is needed for NSH if there is no file system. From Alan Carvalho de Assis. 2015-05-23 09:23:36 -06:00
Gregory Nutt
6bf2257d41 SAMD/L: Change ordering of some initialization steps to match Atmel sample code. Add Errate 13134 support. SAML wait states changed to 1. Sample code is using 0 2015-05-23 08:55:06 -06:00
Gregory Nutt
c61e7c3a96 SAM4CM: Add support for optical mode for UART1. From Max Neklyudov. 2015-05-23 06:48:36 -06:00
Gregory Nutt
bbdb84c1f4 Initial support for the NXP LPC11 family and the LPC1115 MCU in particular. Contributed by Alan Carvalho de Assis. 2015-05-22 14:14:09 -06:00
Gregory Nutt
bd23c4ad4e SAML21. With these changes, the board now builds without error 2015-05-22 10:36:37 -06:00
Gregory Nutt
de6eb5c02b SAML21: Rename sam_gclk.c to samd_gclk.c. Create saml_gclk.c with corrected logic for the SAML21 2015-05-22 07:28:19 -06:00
Gregory Nutt
4542778f90 SAML21 clock config: Fix a misthink in last commit. Move setting of ONDEMAND to after clock is enabled in most cases 2015-05-21 16:50:55 -06:00
Gregory Nutt
dde121c49d SAML21: Clean up a few more compilation issues 2015-05-21 16:23:15 -06:00
Gregory Nutt
4097432f2c SAML21: Add logic to set MCLK CPU and related dividers 2015-05-21 13:40:34 -06:00
Gregory Nutt
7cd5f669bd SAML21: Add FDPLL96M configuration logic 2015-05-21 11:52:38 -06:00
Gregory Nutt
b068185811 SAML21: Add logic to support GLCK peripheral channels; add logic to configure FDPLL lock timer and ref clock GCLKs 2015-05-21 10:47:41 -06:00
Gregory Nutt
20d3b63946 SAMD/L: Move GCLK configuration logic to its own C file 2015-05-21 10:07:42 -06:00
Gregory Nutt
48be1479f6 STM32: Building stm32_rng.c should be conditioned on CONFIG_STM32_RNG, not CONFIG_DEV_RANDOM. From Juha Niskanen 2015-05-21 07:47:22 -06:00
Gregory Nutt
52bcc7d0ba SAM3/4 Serial: In NONBLOCKING mode serial does not receive bytes from UART. This happens because RX interrupt was disabled in the setup routine. To fix this I save interrupt configuration before uart shutdown and restore it after. From Max Neklyudov. 2015-05-21 07:06:47 -06:00
Gregory Nutt
0a9d3d872b Fixes for Tiva TM4C1294NCPDT. From Frank Sautter. 2015-05-20 18:34:15 -06:00
Gregory Nutt
8042d2e412 SAML21: Add some parameter checking for FDPLL96M 2015-05-20 13:51:40 -06:00
Gregory Nutt
0a8633f53b Minor restructure for SAML21 FDPLL 2015-05-20 13:37:08 -06:00
Gregory Nutt
8261197732 SAML21 minor cleanup 2015-05-20 13:00:39 -06:00
Gregory Nutt
67a45b019d SAML32: Update some DFLL logic 2015-05-20 12:26:49 -06:00
Gregory Nutt
ea1adddbcd Fix SYNCBUSY wait for the SAML21 2015-05-20 11:49:24 -06:00
Gregory Nutt
302dbd967d Updated EFM32 RTC driver from Pierre-noel Bouteville 2015-05-19 14:53:01 -06:00
Gregory Nutt
725e3cab72 SAML21-Xplained: Update the cloned SAMD20-Xplained board configuration for specifics of the SAML21-Xplained 2015-05-19 14:32:09 -06:00
Gregory Nutt
857a2d08d9 SAMD/L: Hide differences in the way peripheral clocking is enabled behind macros. Some updates to saml_clockconfig.h + various fixes while working toward SAML21 build 2015-05-19 11:03:24 -06:00
Gregory Nutt
ce5d03c763 Clock configuration logic for the SAML21. Initial commit is just the SAMD20 clock configuration with some naming changes and does not compile 2015-05-19 07:02:58 -06:00
Gregory Nutt
f1f472866f Add saml_trng.h for SAML32 2015-05-19 06:31:48 -06:00
Gregory Nutt
8a18584f03 Add saml_eic.h for SAML21 2015-05-18 18:55:16 -06:00
Gregory Nutt
81ba1f0847 SAML21: Add interrupt header file + fix a few initial compile issues. Still a long way to go 2015-05-18 17:41:28 -06:00
Gregory Nutt
9e1c72e3e2 Add basic board build configurat for the SAML21 Xplained. Initial commit is jsut the SAMD20 Xplained with name changes and does not yet build 2015-05-18 13:16:32 -06:00
Gregory Nutt
1df25eee7c Rename sam_fuses.h to samd_fuses.h; add saml_fused.h for the SAML21 2015-05-18 11:59:53 -06:00
Gregory Nutt
ca283d61e0 Rename sam_sercom.h to samd_sercom.h; Add saml_sercom.h for the SAML21 2015-05-18 10:54:50 -06:00
Gregory Nutt
aca93f9740 Rename sam_port.h to samd_port.h; add saml_port.h for the SAML21 2015-05-18 10:35:11 -06:00
Gregory Nutt
36bea64b5c Rename sam_nvmctrl.h to samd_nvmctrl.h; add saml_nvmctrl.h for SAML21 2015-05-18 09:44:12 -06:00
Gregory Nutt
14160b715e Add SAML21 SUPC header file 2015-05-18 07:25:30 -06:00
Gregory Nutt
85ee7fc8e8 Add saml_i2c_slave.h for the SAML21 2015-05-17 18:18:35 -06:00
Gregory Nutt
53fe23f413 Fix some mismatched C++ logic in header files 2015-05-17 16:51:18 -06:00
Gregory Nutt
c13f11f495 Rename sam_i2c_slave.h to samd_i2c_slave.h 2015-05-17 16:50:40 -06:00
Gregory Nutt
6f12a3f31f Rename sam_i2c_master.h to samd_i2c_master.h; Add saml_i2c_master.h for SAML21 2015-05-17 16:42:37 -06:00
Gregory Nutt
07e1e8b40b SAMD/L: Move content of chip/sam_memorymap.h to chip.h; move chip/sam_pinmap. to sam_pinmap.h for consistency with other header files 2015-05-17 15:34:51 -06:00
Gregory Nutt
2725e382dc Rename sam_spi.h to samd_spi.h; Add saml_spi.h for the SAML21 2015-05-17 15:22:52 -06:00
Gregory Nutt
348d2cc484 Rename sam_usart.h to samd_usart.h; add saml_usart.h for the SAML21 2015-05-17 14:31:21 -06:00
Gregory Nutt
dd8069930e samd_wdt.h should include sam_sercom.h 2015-05-17 13:39:11 -06:00
Gregory Nutt
4d788f1582 Rename sam_evsys.h to samd_evsys.h; Add saml_evsys.h for the SAML21 2015-05-17 12:54:53 -06:00
Gregory Nutt
0c34d3f9b2 Rename sam_wdt.h to samd_wdt.h; Add saml_wdt.h for SAML21 2015-05-17 11:01:24 -06:00
Gregory Nutt
75883a4881 Add SAML21 RSTC register definitions 2015-05-17 10:41:21 -06:00
Gregory Nutt
0376cee7da SAML21: Add PM header file 2015-05-17 10:09:20 -06:00
Gregory Nutt
0d08073f04 SAML21: Rename chip/sam_pm.h to chip/samd_pm.h 2015-05-17 09:18:36 -06:00
Gregory Nutt
f7684abdd2 Rename sam_gclk.h to samd_gclk.h. Add saml_gclk.h 2015-05-17 08:06:56 -06:00
Gregory Nutt
2f200ab966 SAML21: Add OSC32KCTRL header file 2015-05-16 15:49:22 -06:00
Gregory Nutt
10e4cbfeb9 Add SAML21 OSCCTRL definitions 2015-05-16 13:33:09 -06:00
Gregory Nutt
5a79aade2b SAML21: Rename sam_clockconfig.c to samd_clockconfig.c. saml_clockconfig.c forthcoming. 2015-05-16 13:32:12 -06:00
Gregory Nutt
d542c49b53 Add SAML21 MCLK header file 2015-05-16 11:02:19 -06:00
Gregory Nutt
113d065ed2 Rename the sam_sysctrl.h header file to samd_sysctrl.h since it does not apply to the saml 2015-05-16 11:01:45 -06:00
Gregory Nutt
69ca2f0f8b SAML21: Add pin multiplexing definitions 2015-05-15 11:45:56 -06:00
Gregory Nutt
2c71d8c4a5 SAML21: Flesh out SAML21 memory map 2015-05-15 09:30:25 -06:00
Gregory Nutt
5a666cf85b SAMA5 OHCI: Fix errors introduced with blind changes to match changes to LPC17 OHCI. Fix some handling for the case where we get a falso alarm transfer completion after disconnection/cancellation 2015-05-15 09:02:17 -06:00
Gregory Nutt
87b065253d LPC17 USB host: Fix some OHCI done head handling when a tranfer is cancelled 2015-05-15 08:29:45 -06:00
Gregory Nutt
6591a36950 OHCI drivers: Try disabling bulk list when cancelling bulk transfers 2015-05-15 07:31:13 -06:00
Gregory Nutt
33594ef326 Oop.. remove duplicate #else 2015-05-14 14:13:43 -06:00
Gregory Nutt
c84eb2f9fb SAML21: Add configuration logic and placeholders for memory man and pin configruation header files 2015-05-14 14:02:50 -06:00
Gregory Nutt
14d6d059ac Fix a missed renaming in a Kconfig file 2015-05-14 12:33:42 -06:00
Gregory Nutt
f606dea3b1 Rename SAMD directories and configuration variables to SAMDL so that the same build environment can support the SAML 2015-05-14 12:25:09 -06:00
Gregory Nutt
efd06005fa SAMA5D OHCI: Missing D-Cache flush 2015-05-14 11:10:15 -06:00
Gregory Nutt
52720e9368 USB host drivers: Cannot take semaphores in cancel() method 2015-05-14 09:58:21 -06:00
Gregory Nutt
cde3fef581 STM32/EFM32 USB host drivers. Remove some detritus left from previous change 2015-05-14 07:55:55 -06:00
Gregory Nutt
8c05ef57f5 LM3S Ethernet: More semicolons needed after modified DEBUGASSERT macro. From Brennen Ashton 2015-05-14 06:35:40 -06:00
Gregory Nutt
416af1b54f Update README 2015-05-13 13:30:26 -06:00
Gregory Nutt
5b687f4b0f Fix several defien -> define. Thanks Pierre 2015-05-13 06:33:17 -06:00
Gregory Nutt
c4db8e440d SAMV7 TWIHS: Fix logic that performs multi-message tranfers with and without repeated starts. This change is the final piece that was required to get the maXTouch Xplained Pro workding. 2015-05-12 17:56:35 -06:00
Gregory Nutt
40fac5d6d1 KL: Fix offset to the TPM status register. From Michael Hope. 2015-05-12 07:08:33 -06:00
Gregory Nutt
18bc1702e1 Fix typo in arch/arm/include/kl/chip.h header file. From Michael Hope 2015-05-12 07:05:29 -06:00
Gregory Nutt
3467c30d73 EHCI HCDs: Check for transfer in progress before attempting cancellation 2015-05-11 12:12:19 -06:00
Gregory Nutt
cf1ab6baec The USB host cancellation now applies to all transfers and so it no longer conditional 2015-05-11 12:04:03 -06:00
Gregory Nutt
8ed11a374d EHCI HCDs will now support cancellation of syncrhonous transfers 2015-05-11 11:43:31 -06:00
Gregory Nutt
a2ad652509 STM32 and EFM32 host will now support cancellation of synchronous methods 2015-05-11 11:15:28 -06:00
Gregory Nutt
7a3fafb67f OHCI HCDs will not support cancellation of syncrhonous transfers 2015-05-11 10:36:17 -06:00
Gregory Nutt
33f5015f21 Correct an error recently introduced in the STM32 and EFM32 USB host controller drivers. 
The test for data partially transferred is incorrectec: chan->xfrd != xfrlen
Should be chan->xfrd > 0

From Ronly XLN.
 2015-05-11 09:04:25 -06:00
Gregory Nutt
c7a02488c6 Fix a cut'n'paste error in the last commit 2015-05-10 10:23:23 -06:00
Gregory Nutt
e6ebdba913 OHCI: Fix length calculation in all OHCI drivers: CBP==0 means that the entire buffer was transferred, not that a null packet was tranaferred 2015-05-10 10:01:22 -06:00
Gregory Nutt
85647eecc9 Add EXTI line definitions for the STM32L family. 2015-05-09 09:03:14 -06:00
Gregory Nutt
5defecbef5 STM32 F3: Add DBGMCU register definitions for the F3 family. From Greg Meiste. 2015-05-09 06:05:17 -06:00
Gregory Nutt
5a5d044bc5 Adds support for STM32F302K8 and STM32F302K6. From Ben Dyer via PX4/David Sidrane. 2015-05-08 14:10:55 -06:00
Gregory Nutt
c35bb693a9 USB host CDC/ACM fixes. Still kind of buggy 2015-05-08 10:58:41 -06:00
Gregory Nutt
8f0fb36f11 In go_os_start that sets the IDLE thread stack coloration, mov does not set condition codes which are tested by the following beq. Need to use movs instead. Noted by David Sidrane 2015-05-07 20:36:08 -06:00
Gregory Nutt
4bde37eabc kl: enable the clocks to UART1 and UART2. The previous version would cause a hard fault on startup due to the modules not being clocked. Also drop the GPIO configuration as it's done during kl_start(). From Michael Hope. 2015-05-07 17:17:54 -06:00
Gregory Nutt
c120a61b80 kl: fix PWM debugging. TPM1 and TPM2 have two channels instead of six and will hard fault if you try to read the missing channels. From Michael Hope. 2015-05-07 17:17:53 -06:00
Gregory Nutt
53bb938f23 Misc improvements to the CDC/ACM host driver, mostly related to parsing the configuration descriptor. Still does not work. 2015-05-07 10:02:51 -06:00
Gregory Nutt
35952e47ea Add support for the KL25Z64. The KL25Z64 is a lower memory variant of the KL25Z128 and is used on the Teensy LC. From Michael as SourceForge patch 50. 2015-05-07 06:47:17 -06:00
Gregory Nutt
96698619a0 LPC17 USB host: Fix some compile errors when bulk endpoints + USB debug enabled. Refresh a configuration 2015-05-06 16:15:12 -06:00
Gregory Nutt
48be132e5d Fix a few typos in comments 2015-05-06 15:26:07 -06:00