sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
43,357 Commits 1 Branch 0 Tags 291 MiB
ba6e8696b2
Commit Graph

18391 Commits

Author SHA1 Message Date
David Sidrane
040a04241e drivers/spi:Define SPI_~CS~_DELAY_CONTROL to support other delays 2021-11-06 05:14:05 -05:00
Eero Nurkkala
f8832f7d86 mpfs: emmcsd: fix uninitialized value 
cppcheck reports the following:

arch/risc-v/src/mpfs/mpfs_emmcsd.c:2375:22: error: Uninitialized variable: waitbits [uninitvar]
  while (!(status & (waitbits | MPFS_EMMCSD_SRS12_EINT))

The finding is positive and this patch initializes it to
zero properly.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-11-05 11:47:49 +01:00
David Sidrane
c077361a8a imxrt:usb Fix EP type allocation 2021-11-04 13:23:25 -05:00
David Sidrane
95f7f4b9e6 imxrt:usb DMA cache aligned Buffers for Endpoints 2021-11-04 13:23:25 -05:00
David Sidrane
bd2bc1e351 imxrt:usbdev Clean up cache maintainence 2021-11-04 13:23:25 -05:00
David Sidrane
c3d10ad0aa imxrt:usbdev formatting cleanup 2021-11-04 13:23:25 -05:00
David Sidrane
532635129c imxrt:usdhc add proper support for dcache (wb) 2021-11-04 13:23:25 -05:00
David Sidrane
5022244339 imxrt mpuinit:Set Data and Code Type to Normal 
Strongly-Ordered requires aligned access unless
  caching is enabled.

  Normal memory
  Accesses to normal memory region are idempotent...
  - unaligned accesses can be supported
 2021-11-04 13:23:25 -05:00
David Sidrane
34c3efcb91 imxrt mpuinit:Remove duplicate entry for ITCM (0x0) 2021-11-04 13:23:25 -05:00
David Sidrane
08d0434bad imxrt:mpu init handle dcache setting in MPU config 
With CONFIG_ARMV7M_DCACHE the cache maintenance operation
   are not present. Or if CONFIG_ARMV7M_DCACHE_WRITETHROUGH
   is on then buffering operations are no-ops.

   This change enables MPU_RASR_C and MPU_RASR_B if
   CONFIG_ARMV7M_DCACHE is only set.

   if CONFIG_ARMV7M_DCACHE_WRITETHROUGH is set then only
   MPU_RASR_C is enabled.

   N.B When caching is disalbed unaligned access may cause hard faults
   so add -mno-unaligned-access

   It is always safe to enable Buffering in FLASH to achive unaligned
   access leniency, as it is not written to.
 2021-11-04 13:23:25 -05:00
ChenWen
440787c0c1 risc-v/esp32c3: Fix Wi-Fi & BLE coexist issue 
1. Wi-Fi and BLE use common PHY functions.
  2. Fix Wi-Fi & BLE coexist adapter error.
  3. Update esp-wireless-drivers-3rdparty, provide coexist protection for connection.
 2021-11-04 11:02:05 -03:00
ChenWen
65d7f4bfb3 riscv/esp32c3: Support more country codes 2021-11-04 11:02:05 -03:00
ChenWen
4fc2f6e28c riscv/esp32c3: Support debug log configuration for Wi-Fi library 2021-11-04 11:02:05 -03:00
ChenWen
02968cc124 risc-v/esp32c3: Improve Wi-Fi connection success rate 2021-11-04 11:02:05 -03:00
ChenWen
222ec556d5 riscv/esp32c3: Fix some Wi-Fi issues 
1. Fix the issue that Wi-Fi can't connect to some special routers occasionally.
  2. Support Wi-Fi 12/13 channel active scanning by default.
  3. Update Wi-Fi driver code to fix issue of failure to send pkt.
  4. Replace software random with hardware random
  5. Fix Wi-Fi mode start error
 2021-11-04 11:02:05 -03:00
chenwen
33031a2813 riscv/esp32c3: Fix the issue of Wi-Fi automatic disconnection 2021-11-04 11:02:05 -03:00
chenwen
afbad5ca9d riscv/esp32c3: Clear station configuration when connection fails or disconnect 2021-11-04 11:02:05 -03:00
Eero Nurkkala
8e43f39141 mpfs: cache: provide L1/L2 cache enablers 
E51 may configure the L1 and L2 caches. Once configured,
no reconfiguration is possible after hardware reset is
issued.

L2 is 16-way set associative with write-back policy. The
size 2 MB, from which 1 MB is utilized with the values
provided here. That's a total of 8 ways. The rest of the
L2 is left out for the bootloader usage.

mpfs_enable_cache() first checks the bootloader usage
doesn't overlap with the cache itself, thus providing a
set of functional values.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-11-04 11:00:55 -03:00
Alexander Lunev
60de445ab3 stm32h7 sdmmc: do not enable power saving configuration bit (in SD 4-bit mode) because 
the SDIO clock is not enabled when the bus goes to the idle state, that, in turn, breaks
IRQ delivering mechanism over DAT[1]/IRQ SDIO line to the host.
 2021-11-03 22:50:14 -05:00
Xiang Xiao
3e967f784e sim: Split SIM_SANITIZE to SIM_ASAN and SIM_UBSAN 
align the naming style with MM_ASAN

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-11-02 21:02:43 +01:00
mage1
c82a676630 sim: fix sim runtime err under sanitize check mode. 
since gcc sanitize can not stub proper code in nuttx kernel code.
 2021-11-02 21:02:43 +01:00
Jani Paalijarvi
a16a9f80e2 mpfs: i2c: Add support for adaptive I2C bus frequency 
Select the closest possible frequency which is smaller
than or equal to requested in I2C msg
 2021-11-02 04:10:08 -05:00
ligd
2f4662c513 arch/arm: Remove -mcpu for fix warning 
warning: switch '-mcpu=cortex-m55' conflicts with '-march=armv8-m.main' switch

Signed-off-by: ligd <liguiding1@xiaomi.com>
 2021-11-01 21:28:10 -05:00
ligd
8417b4726b Revert "arch/armv8-m: use -mfpu=auto based on -mcpu=cortex-m55" 
This reverts commit d9a5b92c1a306a70df52d50a02a80dc8ef20bf0d.

Revert "arch/arm: Remove -march and -mtune"

This reverts commit b8e99cf12f3a287311a2d341f285c71a5da3e4d4.
 2021-11-01 21:28:10 -05:00
Abdelatif Guettouche
860370284e esp32c3_dma: Remove the DMA test included in the driver along with its 
defconfig.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-11-01 13:49:59 -05:00
Alexander Vasiljev
aeb1d3098d stm32h7/dmamux: correct bit fields 2021-11-01 14:40:33 -03:00
Abdelatif Guettouche
73f15ed544 esp32/Kconfig: Make ESP32_BT_RESERVE_DRAM default to 0 again if 
Bluetooth is not enabled.  When Bluetooth is enbaled then it defaults to
64KB.  This will not wast those 64KB of memory when Bluetooth is not enabled.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-11-01 10:01:38 -05:00
Alexander Lunev
33d236121f stm32h7 sdmmc: added missing sdio_set_sdio_card_isr() function to initialize SDIO in-band interrupt logic 2021-10-31 22:26:13 -05:00
Xiang Xiao
b58379b738 arch/arm: Add l suffix for INT32_C macro 
since int32_t typedef to signed long

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-10-31 12:56:41 -03:00
Michal Lenc
a64903acc7 samv7: adds support for QSPI driver in SPI Mode 
This commit adds new files that support functionality of QSPI driver in
SPI Master Mode. This functionality is included in new files sam_qspi_spi.x
to avoid too much mess in the source code. QSPI in SPI mode can be turn
on by config option SAMV7_QSPI_SPI_MODE.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2021-10-30 01:24:31 -05:00
yinshengkai
ee17ae5ba1 tool: add code coverage tool 2021-10-29 19:21:23 +02:00
raiden00pl
bb5e3fee44 arch/arm/src/stm32/stm32_foc.c: define missing FOC1_PWM_FZ_BIT for G4 2021-10-29 07:49:59 -05:00
raiden00pl
8e9e54cad3 arch/arm/src/stm32/hardware/stm32_dbgmcu.h: fix invalid STM32_DBGMCU_APB2_FZ offset for G4 2021-10-29 07:49:59 -05:00
Alexander Vasiljev
35e93644cf stm32h7: add low power timers 2021-10-27 10:37:05 -05:00
Jiuzhu Dong
1ed4118378 power/battery: add baterr, batinfo, batwarn for debug log 
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
 2021-10-26 13:59:42 -03:00
chao.an
b90d094138 arch/sim: add native socket support based on usrsock 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2021-10-26 08:01:50 -05:00
Gustavo Henrique Nihei
de0e4d4aac xtensa/esp32s2: Rename MTD-related configs to become more intuitive 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-25 21:45:20 -05:00
Gustavo Henrique Nihei
06bb85d8a5 risc-v/esp32c3: Rename MTD-related configs to become more intuitive 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-25 21:45:20 -05:00
Gustavo Henrique Nihei
fb00ab3242 xtensa/esp32: Rename MTD-related configs to become more intuitive 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-25 21:45:20 -05:00
Gustavo Henrique Nihei
eb889b0884 xtensa/esp32s2: Enable Partition Table allocation at custom offset 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-25 16:34:58 -03:00
Gustavo Henrique Nihei
eb7ffd014e risc-v/esp32c3: Enable Partition Table allocation at custom offset 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-25 16:34:58 -03:00
Gustavo Henrique Nihei
211f899b62 risc-v/esp32c3: Refactor and reorganize Partition Table related configs 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-25 16:34:58 -03:00
Gustavo Henrique Nihei
9d7b9821b3 xtensa/esp32: Enable Partition Table allocation at custom offset 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-25 16:34:58 -03:00
Gustavo Henrique Nihei
b555b3f89e xtensa/esp32: Refactor and reorganize Partition Table related configs 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-25 16:34:58 -03:00
Gustavo Henrique Nihei
793266d39e espressif: Fix spacing style in Kconfig files 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-25 08:01:44 -05:00
Gustavo Henrique Nihei
4ff754827c espressif: Fix prompt string of Wi-Fi FS mount point configs 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-25 08:01:44 -05:00
Gustavo Henrique Nihei
a1af605973 espressif: Fix references to Wi-Fi according to Wi-Fi Alliance 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-25 08:01:44 -05:00
Alan C. Assis
7e8003cba1 Move chip specific file compilation to CHIP_CSRCS 2021-10-23 04:03:12 -05:00
Alan C. Assis
03738622a1 esp32s2: Add RNG driver support and board profile example 2021-10-23 04:03:12 -05:00
David Sidrane
e1a0a1188e stm32h7:Support CONFIG_MPU_RESET and CONFIG_ARM_MPU_EARLY_RESET 2021-10-23 03:58:26 -05:00
David Sidrane
e66423229a stm32f7:Support CONFIG_MPU_RESET and CONFIG_ARM_MPU_EARLY_RESET 2021-10-23 03:58:26 -05:00
David Sidrane
fd2c1cb216 stm32:Support CONFIG_MPU_RESET and CONFIG_ARM_MPU_EARLY_RESET 2021-10-23 03:58:26 -05:00
David Sidrane
9d8f7126f6 armv7-m,armv7-r,armv8-m:MPU Add mpu_reset and ARM_MPU_EARLY_RESET 
When NuttX is booted from a foreign (non NuttX)
   bootloader. There as a possibility that the
   bootloader configured the MPU, in an
   incompatible way for the NuttX memory usage.

   The option to reset the MPU before it is initialized
   may not succeed if the bss and data initialization
   code violated the previous MPU configurations.

   Added herein are ARM_MPU_RESET and
   ARM_MPU_EARLY_RESET. The former can be used
   If the system is capable of booting and running
   NuttX MPU configuration code without an MPU
   violation. The latter is used if the system can
   not run the bss and data initialization code.

   These are options so that a NuttX may be configured to
   not clobber a bootloader MPU configuration in a system
   that is architected to share the MPU configuration task.
 2021-10-23 03:58:26 -05:00
zhuyanlin
cf1a04d0a2 xtensa:cache: add lock & unlock feature 
Since some xtensa cores cache support lock & unlock feature.

Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
 2021-10-22 13:31:32 -03:00
zhuyanlin
b4ea11f7b1 arch:cache: add lock feature for cache 
Some architectures support lock & unlock cache feature.

Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
 2021-10-22 13:31:32 -03:00
David Sidrane
90cfa6f313 imxrt:syslog is dependant on arm_lowputc 2021-10-22 10:07:20 -05:00
oreh-a
3c1ac89557 Fixed line length 2021-10-22 09:03:14 -05:00
Alexander Oryshchenko
ed392abb83 Added ARCH_BOARD_STM32F0G0L0_CUSTOM_CLOCKCONFIG option to stm32f0/g0/l0 chip configiuration 2021-10-22 09:03:14 -05:00
Eero Nurkkala
e57f3f7a3a mpfs: emmcsd: provide proper internal emmc settings 
So far the SD-card functionality has been tested with
the driver. Now, also the internal eMMC has been tested
working with this patch. This patch applies IOMUX and
clock settings that have been tested working with the
internal eMMC in the Polarfire Icicle kit.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-10-21 22:41:08 -05:00
Eero Nurkkala
c34b9620db mpfs: clockconfig: add clock initialiation sequence 
Add clock initialization sequence especially for systems
containing no bootloader.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-10-21 22:40:26 -05:00
Eero Nurkkala
bc72ccdf6a mpfs: Kconfig/Make: add DDR support flag 
This adds the proper flag for introducing the DDR
support. Also call the mpfs_ddr_init() at the
proper location.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-10-21 22:40:26 -05:00
Eero Nurkkala
3b330089d5 mpfs: ddr: add DDR training 
This adds DDR training. The training has a small chance of failing,
and then the training is restarted.

DDR training cannot be done meaningfully while the software is
in DDR. If the system is intended to run from eNVM, like a
bootloader, the linker script should be tuned to utilize the envm
region as follows:

  envm (rx)   : ORIGIN = 0x20220100, LENGTH = 128K - 256
  l2lim (rwx) : ORIGIN = 0x08000000, LENGTH = 1024k

256 bytes are reserved for the system; The fixed block may be
installed from the 'hart-software-services' -repository:
https://github.com/polarfire-soc/hart-software-services.git

For example, the 256-byte image: hss-envm-wrapper-bm1-dummySbic.bin
may be prepended on the nuttx bootloader image in the following
manner:

 cat hss-envm-wrapper-bm1-dummySbic.bin > nuttx_bootloader.bin
 cat nuttx.bin >> nuttx_bootloader.bin
 riscv64-unknown-elf-objcopy -I binary -O ihex --change-section-lma
  *+0x20220000 nuttx_bootloader.bin flashable_image.hex

This provides an image 'flashable_image.hex' that may be flashed on
the eNVM region via Microsemi Libero tool.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-10-21 22:40:26 -05:00
Jukka Laitinen
c5b11f42b6 mpfs_head.S: Support for booting on different harts and from eNVM 
- Fix the FPU enabling code
- If booting from eNVM, all harts start booting. With CONFIG_MPFS_BOOTLOADER,
  one can allow just one hart booting and rest are stuck in wfi.
- Check that mtvec is actually updated before continuing the boot
- Create 5 IRQ stacks, one for each hart

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2021-10-21 22:40:26 -05:00
Jukka Laitinen
37761c293d mpfs_head.S: Fixes for booting on different harts 
- Jump to mpfs_start with mhartid in a0 as the comment says
- Don't invalidate mmu tlb on e51 (it doesn't have mmu)
- Fix FPU initialization flags on e54 (it fires IRQ5 and crashes)

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2021-10-21 22:40:26 -05:00
Jukka Laitinen
e5843db282 mpfs: Add configuration flags to configure NuttX booting on single hart 
The bootloader hart also configures the needed clocks and peripherals.

Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
 2021-10-21 22:40:26 -05:00
Eero Nurkkala
d909b0f635 mpfs: hardware/memorymap: add more base addresses 
Add a number of missing base addresses.

Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
 2021-10-21 22:40:26 -05:00
chao.an
bd7cb1aae5 sim/bluetooth: remove the WIRELESS_BLUETOOTH depends if native host is in use 
Signed-off-by: chao.an <anchao@xiaomi.com>
 2021-10-21 11:24:46 -05:00
Abdelatif Guettouche
018aa8eb8d esp32c3_serial.c: Remove the stub implementations of the early serial 
functions as they are only called when the configuration is enabled.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-20 10:22:10 -03:00
Xiang Xiao
1efc9fbac6 sim/rptun: Trigger the callback only the sequnece number change 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-10-20 10:21:54 -03:00
Abdelatif Guettouche
c83c1071cc esp32c3_bignum.c & esp32c3_sha.c: Fix some trivial nxstyle complaints. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
e424241d09 arch/risc-v/esp32c3: Remove the bignum test from the driver. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
91cb9dafaf arch/risc-v/esp32c3: Remove the RSA test from the driver. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
652d77efd2 arch/risc-v/esp32c3: Remove the SHA test from the driver. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
5d1c01aea7 arch/risc-v/esp32c3: Remove the AES test from the driver. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
Abdelatif Guettouche
8288a04a0b arch/xtensa/esp32: Remove the AES test from the driver. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-19 18:41:57 -03:00
zhuyanlin
b5134565fa arch:xtens:mpu: modify acc and memtype to uint32_t 
The uint8_t and uint16_t will overflow in MPU_ENTRY_AR marco.

Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
 2021-10-19 00:24:31 -05:00
Xiang Xiao
91398e73eb arch/xtensa/Kconfig: add quotes in source to clean warnings from setconfig 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-10-19 00:33:51 +02:00
Michal Lenc
3e1ce5f770 arch/arm/src/imxrt/hardware: add header file for ADC_ETC module 
This commit adds header file imxrt_adc_etc.h for external ADC trigger
module. This contains only definitions of ADC_ETC registers and separate
bits, implementation of ADC_ETC driver is yet to be done.

Signed-off-by: Michal Lenc <michallenc@seznam.cz>
 2021-10-17 16:50:59 +02:00
Abdelatif Guettouche
7549de49b4 arch/*_cpupause:Allow a spin before taking the g_cpu_wait spinlock. 
If we repeatedly call up_cpu_pause and up_cpu_resume, there would be
cases where the next call to up_cpu_pause happens while the other CPU is
still responding to the previous resume request. In this case the
DEBUGASSERT will trigger. We should allow the first CPU to wait until the
other CPU has finished responding to the resume request.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-17 21:10:23 +09:00
Abdelatif Guettouche
7b43d11435 esp32_spiflash.c: Allocate only one variable to hold the cache state in 
single CPU mode.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 22:56:21 -07:00
Abdelatif Guettouche
f54a929001 esp32_spiflash.c: Keep the index of the other CPU between SPI Flash 
operations.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 22:56:21 -07:00
Abdelatif Guettouche
eeb68bda3d xtensa_testset.c: Simplify the test-set function and remove some old 
comments.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 22:56:21 -07:00
Abdelatif Guettouche
dfe1637864 esp32_spiflash.c: Pause the other CPU during flash operation. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 22:56:21 -07:00
Abdelatif Guettouche
f2c2323642 esp32_intercpu_interrupt.c: Force the functions to internal SRAM. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 22:56:21 -07:00
Abdelatif Guettouche
d2bc011719 arch/xtensa/xtensa_cpupause.c: Allow a spin before taking the g_cpu_wait 
spinlock.

If we repeatedly call up_cpu_pause and up_cpu_resume, there would be
cases where the next call to up_cpu_pause happens while the other CPU is
still responding to the previous resume request.  In this case the
DEBUGASSERT will trigger.  We should allow the first CPU to wait until the
other CPU has finished responding to the resume request.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 09:46:23 -07:00
Abdelatif Guettouche
591c1563b8 esp32_oneshot_lowerhalf.c: Use the same alignment as the rest of the 
code base.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 00:01:23 -07:00
Abdelatif Guettouche
9e1d2ca95e esp32_rt_timer.c: Group static variables into a struct and fix naming 
standard

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 00:01:23 -07:00
Abdelatif Guettouche
0dff3f2762 esp32_wifi_adapter.c: Use the specified spin lock when 
enabling/disabling interrupts.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 00:01:23 -07:00
Abdelatif Guettouche
a50d673df7 esp32_wifi_adapter.c: Don't hold another spinlock when calling 
enter_critical_section, we already hold the global IRQ spinlock.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 00:01:23 -07:00
Abdelatif Guettouche
11216257cf esp32_rt_timer.c: Don't nest calls to spin_lock_irqsave with a device 
specific spinlock, this will lead to deadlocks.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 00:01:23 -07:00
Abdelatif Guettouche
e847c61801 esp32_wifi_adapter.c: Use device specific locks. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 00:01:23 -07:00
Abdelatif Guettouche
32f7471f9e esp32_wlan.c: Use device specific locks. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 00:01:23 -07:00
Abdelatif Guettouche
4ae1285124 esp32_emac.c: Use device specific locks. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 00:01:23 -07:00
Abdelatif Guettouche
e64390d5e9 esp32_rt_timer.c: Use device specific locks. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 00:01:23 -07:00
Abdelatif Guettouche
c61009c2cf esp32/esp32_spi_slave.c: Use device specific locks. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 00:01:23 -07:00
Abdelatif Guettouche
2273684cb1 esp32/esp32_spi.c: Use device specific locks. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 00:01:23 -07:00
Abdelatif Guettouche
0123243f9a esp32/esp32_i2c.c: Use device specific locks. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 00:01:23 -07:00
Abdelatif Guettouche
0af9a49d9c esp32/esp32_oneshot_lowerhalf.c: Use device specific locks. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 00:01:23 -07:00
Abdelatif Guettouche
698af43d78 esp32/esp32_freerun.c: Use device specific locks. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 00:01:23 -07:00
Abdelatif Guettouche
04bd27400a xtensa/esp32_wdt_lowerhalf.c: Use device specific locks. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 00:01:23 -07:00
Abdelatif Guettouche
19a096cdfe arch/xtensa/esp32_tim_lowerhalf.c: Use device specific locks. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-16 00:01:23 -07:00
Gustavo Henrique Nihei
ff705586bb xtensa/esp32s2: Provide SPI Flash parameters to MCUboot build 
Also unify bootloader config creation to reduce duplication.

Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-15 23:55:10 -07:00
Gustavo Henrique Nihei
4d5e0f8fe1 xtensa/esp32: Provide SPI Flash parameters to MCUboot build 
Also unify bootloader config creation to reduce duplication.

Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-15 23:55:10 -07:00
Gustavo Henrique Nihei
99ac065d0a risc-v/esp32c3: Provide SPI Flash parameters to MCUboot build 
Also unify bootloader config creation to reduce duplication.

Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-15 23:55:10 -07:00
Gustavo Henrique Nihei
cc78541966 risc-v/esp32c3: Add esp-nuttx-bootloader folder to gitignore list 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-15 23:55:10 -07:00
Gustavo Henrique Nihei
ae25ebce4c risc-v/esp32c3: Fix wrong arch in the path to chip folder 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-15 23:55:10 -07:00
Abdelatif Guettouche
a7d8d9dd98 esp32s2/tie.h: Run the file though detab. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-14 07:39:54 -03:00
Abdelatif Guettouche
6d246eb18f esp32s2/tie.h: The old tie.h file was from ESP32 which doesn't apply to 
ESP32-S2.  This commit gets the correct S2 tie.h file

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-14 07:39:54 -03:00
Abdelatif Guettouche
217fd97fd3 xtensa_coproc.S: Correctly save/restore coprocessor0 state. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-14 07:39:54 -03:00
Abdelatif Guettouche
7420f245bc xtensa_context.S: Save and restore SCOMPARE1 when necessary. 
SCOMPARE1 is used by some atomic instructions and need to be preserved
during a context switch.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-10-14 06:32:17 -03:00
Alin Jerpelea
b9986ca016 arch: arm: update licenses to Apache 
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
 2021-10-11 10:13:07 +02:00
jsun
c58fddb915 Open ble controller adaptation code 
N/A

Signed-off-by: jsun <jsun@bouffalolab.com>
 2021-10-08 02:30:27 -07:00
Jari van Ewijk
e4752fbaee S32K1xx arch: Add (optional) support for SPI native/hardware chip select 2021-10-05 06:07:18 -07:00
Gustavo Henrique Nihei
47e804b167 risc-v/esp32c3: Make BLE adapter code compliant to nxstyle 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-10-05 08:45:40 -03:00
Alan C. Assis
867c6d0636 esp32: Add initial support to Bluetooth Low Energy 
Co-authored-by: saramonteiro <saramonteirosouza44@gmail.com>
Co-authored-by: Gustavo Henrique Nihei <gustavonihei@gmail.com>
 2021-10-04 15:10:37 -03:00
Abdelatif Guettouche
d22b4ec539 espxx_rng.c: Add "/" at the beginning of paths for consistency. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-09-30 13:50:25 -03:00
Abdelatif Guettouche
c811cefa2d esp32c3_rng.c: Remove unused functions. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-09-30 13:50:25 -03:00
Abdelatif Guettouche
5c6a30c00b esp32_rng.c: Remove the initialization guard. The init function is 
called only once during startup.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-09-30 13:50:25 -03:00
Abdelatif Guettouche
6a262c5203 esp32_rng.c: Remove unused functions. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-09-30 13:50:25 -03:00
liuhuan
ee6138e9ba power: Open CONFIG_PM compilation failed 
include debug.h

Signed-off-by: liuhuan <liuhuan16@xiaomi.com>
 2021-09-30 07:16:07 -07:00
Jari van Ewijk
cf6dcbc6fd S32K1XX arch: gpioread may also be used for output pins 2021-09-30 04:30:50 -07:00
Xiang Xiao
77bc1d1bdf power/battery: Move the enumurate to the common place 
so the userspace program can handle the different battery driver equally

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-09-30 14:58:42 +09:00
P.Brier
b9d1fcb232 Use ethernet MAC programmed in imxrt OCOTP MAC0/MAC1 (teemsy board has this) 2021-09-29 20:45:14 -07:00
Sara Souza
8a142f474e xtensa/esp32-s2/rttimer: Disable alarm before setting a new value and enabling it 2021-09-28 21:02:57 -03:00
Sara Souza
33f2d46bff risc-v/esp32-c3/rttimer: Disable alarm before setting a new value and enabling it 2021-09-28 21:02:57 -03:00
Alin Jerpelea
15a37c5a5a arch: Omni Hoverboards: update licenses to Apache 
Gregory Nutt has submitted the SGA
Omni Hoverboards has submitted the SGA
David Sidrane has submitted the ICLA
Mateusz Szafoni has submitted the ICLA
Sebastien Lorquet has submitted the ICLA
Paul Alexander Patience has submitted the ICLA

as a result we can migrate the licenses to Apache.

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
 2021-09-28 04:37:38 -07:00
Gustavo Henrique Nihei
20341e6f17 risc-v/esp32c3: Enable support for "make bootloader" target 
This enables the provisioning of the bootloader binaries through the
build system.

Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-27 18:22:29 -07:00
Gustavo Henrique Nihei
3c63cb522c risc-v/esp32c3: Enable booting from MCUboot bootloader 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-27 18:22:29 -07:00
Gustavo Henrique Nihei
a5f9e29d78 xtensa/esp32s2: Enable support for "make bootloader" target 
This enables the provisioning of the bootloader binaries through the
build system.

Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-27 18:21:53 -07:00
Gustavo Henrique Nihei
800678ca78 xtensa/esp32s2: Enable booting from MCUboot bootloader 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-27 18:21:53 -07:00
Jari van Ewijk
62c41a723b s32k1xx_eeeprom.c - fix compiler warnings 2021-09-27 06:02:59 -07:00
Abdelatif Guettouche
5336704c77 esp32_start.c: Initialize the SPI RAM before enabling its cache. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-09-27 05:13:51 -07:00
Gustavo Henrique Nihei
c23986ec63 xtensa/esp32: Select ARCH_HAVE_BOOTLOADER for ESP32 chips 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-24 10:48:19 -07:00
Gustavo Henrique Nihei
86518bdf25 tools: Trigger clean_bootloader on distclean for supported chips 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-24 10:48:19 -07:00
Gustavo Henrique Nihei
4ac3044cc3 xtensa/esp32: Enable build system to download or build bins from source 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-23 20:52:25 -07:00
Sara Souza
9c2c5d3919 risc-v/esp32-c3: fix pid initiatialization on esp32c3_rt_timer.c 
pid variable was initialized to -EINVAL to prevent rt_timer_deinit
from delete an invalid kthread. But priv->pid was being overwritten in the
rt_timer_init, so in case of failure to create a kthread, it would
call rt_timer_deinit with a non expected initialization value.
 2021-09-23 19:01:27 -07:00
Sara Souza
d0e7d7b77f risc-v/esp32-c3: Remove _s of non static variables from esp32c3_rt_timer.c 2021-09-23 19:01:27 -07:00
Abdelatif Guettouche
f2f2040c44 esp32_spiram/psram/himem: Add and fix the files' sections. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-09-23 02:49:11 -07:00
Abdelatif Guettouche
3d8a6fb676 esp32_spiram.c: Remove esp_himem_reserved_area_size from esp32_spiram.c 
file.  This function is already defined in esp_himem and is used only
when that file is built.  We don't need another weak function.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-09-23 02:49:11 -07:00
Abdelatif Guettouche
2834d2a46f esp32_spiflash.c/esp32_spiram.c: Remove some unused macros/functions/variables. 
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
 2021-09-23 02:49:11 -07:00
Xiang Xiao
47c60b2de8 arch/arm: Remove -march and -mtune 
since -mcpu is enough https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58869

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2021-09-23 11:48:11 +02:00
Jari van Ewijk
bbb2f1f8c7 S32K1XX: Add LPI2C slave support 2021-09-22 19:36:34 -07:00
Sara Souza
962059f843 xtensa/esp32-s2: Adds oneshot device driver support 2021-09-22 22:53:54 -03:00
David Sidrane
6d299ce802 stm32h7:DMA_TRBUFF is DMA_SCR_TRBUFF 2021-09-22 22:48:10 -03:00
Sara Souza
fba6fa2dc1 xtensa/esp32-s2: Adds support to rt_timer and systimer to ESP32-S2. 2021-09-22 17:18:24 -03:00
Sara Souza
2cd4f4af79 xtensa/esp32-s2: Adds freerun timer wrapper 2021-09-22 09:38:10 -03:00
Gustavo Henrique Nihei
e651ef0969 arch/risc-v: Remove CODE qualifier for RISC-V-specific files 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-22 08:16:01 -03:00
Gustavo Henrique Nihei
06f4ee850a arch/risc-v: Remove FAR qualifier for RISC-V-specific files 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-22 08:16:01 -03:00
Gustavo Henrique Nihei
e9c17c9332 risc-v/rv32m1: Fix wrong position for ++ operator on serial driver 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-22 08:16:01 -03:00
Gustavo Henrique Nihei
eca1f86294 arch/xtensa: Remove CODE qualifier for Xtensa-specific files 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
 2021-09-22 08:16:01 -03:00