sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
26,238 Commits 1 Branch 0 Tags 291 MiB
ba8e6083bf
Commit Graph

1884 Commits

Author SHA1 Message Date
Gregory Nutt
5b6fafb3f5 Several MTD FLASH drivers nullify the freed 'priv' structure and failed to return NULL as stated in the comments. Result, will operate on a NULL pointer later. Noted by David Sidrane. 2016-06-30 17:49:53 -06:00
Gregory Nutt
a897fd4ccf Eliminate use of apps/system/usbmonitor. Use drivers/usbmonitor instead. 2016-06-30 13:09:22 -06:00
Gregory Nutt
7c34a77b54 Move apps/system/usbmonitor to nuttx/drivers/usbmonitor 2016-06-30 12:24:33 -06:00
Gregory Nutt
cbb36416ab Need to use back- not forward-slash in character constant 2016-06-27 09:52:50 -06:00
Michael Spahlinger
3d5e690977 Shadow-Mode: The output- and configuration registers of the IO-Expander 
are held in the microcontrollers memory and only written to the IO-Expander.
 This reduces bus traffic and is more error-proof than the normal read-
 modify-write operation.

 Retry Mode: If enabled and an error occurs while writing to the IO-Expander the
 current transmission is automatically repeated once.
 2016-06-27 08:11:54 -06:00
Gregory Nutt
b16fdaf155 Some small improvements to GPIO driver 2016-06-26 11:24:35 -06:00
Gregory Nutt
db50f13511 Correct some typos in DEBUGASSERT statements 2016-06-24 14:34:21 -06:00
Gregory Nutt
20708c7c5e GPIO driver: Fix inconsistency in naming; beef up a debug assertion. 2016-06-24 11:32:24 -06:00
Gregory Nutt
ae19ca45e0 drivrs/ioexpander: Add support for a very simple GPIO drivers. It supports only pre-conrigured input and output pins and only basic input and output operations. 2016-06-24 09:43:49 -06:00
Wolfgang Reissnegger
d27ebee070 [sam34][timer] Fix ops check in TCIOC_STOP. 2016-06-23 17:12:24 -07:00
Gregory Nutt
acf3b14fe2 Trivial typo fix in README and document 2016-06-22 16:17:57 -06:00
Gregory Nutt
31b8e52267 Update README and documentatino 2016-06-22 14:47:40 -06:00
Gregory Nutt
0cb137d021 SYSLOG device flush logic not meaningful if SYSLOG file channels not supported 2016-06-22 13:35:53 -06:00
Gregory Nutt
1774ff2ed9 Add SYSLOG documentation to the porting guide 2016-06-22 12:26:54 -06:00
Gregory Nutt
b3acebd292 Update/replace drivers/syslog/README.txt 2016-06-22 10:47:27 -06:00
Gregory Nutt
9c87749afc SYSLOG device channel: Pre-pending CR to LF is now a configuration option 2016-06-22 10:08:20 -06:00
Gregory Nutt
91b82dcae3 SYSLOG character device channel will now expand LF to CR-LF 2016-06-22 08:36:50 -06:00
Gregory Nutt
82c890db23 syslog_dev_flush() needs to check if the inode is a mountpoint before calling the flush() method. Noted by David Sidrane. 2016-06-22 05:58:33 -06:00
Gregory Nutt
35cb2fb87d Eliminate a warning 2016-06-21 16:59:46 -06:00
Gregory Nutt
cb55c06153 sched_file_channel(): Comments say that we need to lock the scheduler, but we do not. 2016-06-21 16:39:28 -06:00
Gregory Nutt
8a9bd9af9d SYSLOG: Some rather complex conditional compilation missed a case. 2016-06-21 15:08:09 -06:00
Gregory Nutt
0e1e3bc404 Add a file that I forgot in the last commit; Also update some comments. 2016-06-21 13:33:17 -06:00
Gregory Nutt
e6a1d53869 Extend SYSLOG logic so that we can send SYSLOG output to a file. Not verified on initial commit. 2016-06-21 12:54:47 -06:00
Paul A. Patience
2f76f6e848 can: Add support for poll 2016-06-21 13:02:46 -04:00
David Sidrane
205a4b8498 Missing EXTERN on global variable declaration 2016-06-21 10:09:09 -06:00
Gregory Nutt
8f0c2cdd13 SYSLOG: Change configuration selections to assure that one and only one SYSLOG device can be selected. Also add a check to assure that it is appropriate to use up_putc as the low-level syslog device. Adds CONFIG_SYSLOG_CONSOLE and CONFIG_SYSLOG_SERIAL_CONSOLE. 2016-06-21 09:59:09 -06:00
Gregory Nutt
5118264e6c Rename CONFIG_SYSLOG_CONSOLE to CONFIG_CONSOLE_SYSLOG 2016-06-21 09:35:51 -06:00
Gregory Nutt
485aa6b231 SIM: Comment out skip scheduler debug output that can hang the simulation. 2016-06-21 08:59:01 -06:00
Gregory Nutt
c5ac473bc0 SYSLOG: Remove an obsolete, unused configuration item from Kconfig file 2016-06-21 07:58:42 -06:00
Gregory Nutt
62d8f839c7 SYSLOG: Now a two phase initialization. Some SYSLOG channels cannot be initialized until later in the bringup 2016-06-21 07:52:24 -06:00
Gregory Nutt
5385266756 SYSLOG: Fix a compile problem with assertions enabled. 2016-06-21 07:24:14 -06:00
Sebastien Lorquet
9a22ed1095 Trivial but required change to build SPI EEPPROM driver. 2016-06-21 06:29:26 -06:00
Gregory Nutt
29a99bef0f serial/Kconfig: Oops put SERIAL_CONSOLE definition within if-endif condition. Better outside 2016-06-20 17:49:16 -06:00
Gregory Nutt
cf1375daf7 Break syslog_channel.c up into syslog_channel.c, syslog_putc.c, syslog_force.c and syslog_flush.c to limited what is brought into the link. Separate syslog_emergstream.c from syslog_stream.c. Didn't help in the case I was looking at. 2016-06-20 17:10:52 -06:00
Gregory Nutt
505ca542e8 Remove some last traces of lowvsyslog that were missed; Add a SYSLOG emergency channel for handling assertion output more cleanly 2016-06-20 16:11:50 -06:00
Gregory Nutt
2a751068e6 Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err(). 2016-06-20 12:44:38 -06:00
Gregory Nutt
43eb04bb8f Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
Gregory Nutt
d40a473f72 Without lowsyslog() *llwarn() is not useful. Eliminate and replace with *warn(). 2016-06-20 09:37:08 -06:00
Gregory Nutt
2b445ddccc Remove lowsyslog(). The new syslog() includes all of the functionality of lowsyslog(). No longer any need for two interfaces. 2016-06-20 08:57:08 -06:00
Gregory Nutt
5002e27e84 Since syslog_add_intbuffer can now be called from the IDLE thread, it must use a critical section. Also fix an error in circular buffer index handling. 2016-06-20 07:50:07 -06:00
Gregory Nutt
f4c47636e7 SYSLOG: Debug output from the IDLE task should be forced like interrupt level output 2016-06-20 07:35:38 -06:00
Gregory Nutt
fa365e85f5 Update some cmoments 2016-06-20 06:11:22 -06:00
Stefan Kolb
a68232863e Fix missing implementation of static function 2016-06-20 06:11:21 -06:00
Gregory Nutt
9a19d64610 Reanem syslogstream.c to syslog_steam.c for consistency 2016-06-19 18:19:34 -06:00
Gregory Nutt
7dd66a4620 Need to pass va_list as a reference to vsyslog. This is because va_list is a structure in some compilers and passing of structures in the NuttX sycalls does not work. 2016-06-19 14:50:00 -06:00
Gregory Nutt
690a0e7a6e Eliminate another warning 2016-06-19 13:58:39 -06:00
Gregory Nutt
b68822805f Eliminate a warning 2016-06-19 13:56:49 -06:00
Gregory Nutt
e480b385e6 SYSLOG: syslog_initialize.c appeared twice is list of sources 2016-06-19 13:55:23 -06:00
Gregory Nutt
5b2aa7bf99 Remove all traces of CONFIG_SYSLOG 2016-06-19 13:59:43 -06:00
Gregory Nutt
9434d3e945 There is now one-and-only-one copy of syslog_putc. It is in the SYSLOG channel logic and can redirect syslog output as needed. All former syslog_putc versions were renamed and the corresponding SYSLOG device initializaiton now calls syslog_channel() 2016-06-19 13:03:20 -06:00