sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
35,766 Commits 1 Branch 0 Tags 291 MiB
bc7566a83f
Commit Graph

258 Commits

Author SHA1 Message Date
Xiang Xiao
af5d0d3157 boards/sim/sim/sim/src/sim_bringup.c: Simulator shouldn't assume that graphics stack is enabled if both X11 framebuffer and touchscreen driver turn on. 2019-12-16 08:57:40 -06:00
chao.an
3c472dcf52 boards/sim/sim/sim/src/sim_bringup.c: Force format little fs before mount. 2019-12-16 08:55:35 -06:00
Gregory Nutt
541bfe9a5e Revert "boards/arm/am335x/beaglebone-black/src/am335x_bringup.c: CAN0 and CAN1 reversed in one place. Spotted by Alan Carvahlo de Assis." 
Logic was correct as originally submitted.

This reverts commit 77eea3dd66.
 2019-12-16 07:55:08 -06:00
Gregory Nutt
77eea3dd66 boards/arm/am335x/beaglebone-black/src/am335x_bringup.c: CAN0 and CAN1 reversed in one place. Spotted by Alan Carvahlo de Assis. 2019-12-15 17:51:46 -06:00
Alan Carvalho de Assis
787128930f arch/arm/src/samd2l2 and boards/arm/samd2l2/arduino-m0: Add support to SAMD2L ADC driver and board support to Arduino M0. 2019-12-15 17:36:59 -06:00
Petro Karashchenko
871197b4ec arch/arm/src/am335x/ and boards/arm/am335x/beaglebone-black/: Initial CAN support for the BBB. 2019-12-15 17:12:54 -06:00
Minamiya Natsuki
0357115bf9 Merged in MinamiyaNatsuki/nuttx (pull request #1095) 
Remove duplicate code from stm32_bringup.c

This code repeated two times by mistake.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-15 12:21:28 +00:00
Alan Carvalho de Assis
3840889b11 boards/arm/stm32/stm32f103-minimum/: Add support to LCD1602 using PCF8574 Backpack board. 2019-12-13 12:10:17 -06:00
chao.an
0d2afbd5cb boards/sim/sim/sim/configs/loadable/defconfig: Update the mount() point of hostfs. 2019-12-13 08:30:34 -06:00
Xiang Xiao
80d4072bf4 boards/sim/sim/sim/src/sim_bringup.cTry to mount /dev/rammtd if CONFIG_FS_LITTLEFS is enabled. 2019-12-13 08:05:04 -06:00
Xiang Xiao
a6c0c88ac6 boards/sim/sim/sim/configs/: Run make olddefconfig for all simulator config 2019-12-12 11:19:46 -06:00
David Sidrane
eb2bcfc44f boards/arm/imxrt/imxrt1020-evk/include/board.h: Enable the GPIO based CD. 2019-12-12 08:34:58 -06:00
David Sidrane
2cbcb8fd00 arch/arm/src/imxrt/imxrt_clockconfig.c and board.h: Allow clock setting for SPI and I2C from board.h. 2019-12-12 08:33:05 -06:00
Nathan Hartman
9655730ef8 Fix various typos and spelling errors. 2019-12-12 07:41:51 -06:00
Masayuki Ishikawa
0eb9bfa49d Merged in masayuki2009/nuttx.nuttx/fe310_with_pll (pull request #1094) 
fe310 with pll

* arch: fe310: Introduce CONFIG_ARCH_CHIP_FE310_QEMU

* boards: hifive1-revb: Introduce CONFIG_ARCH_CHIP_FE310_QEMU

* arch: fe310: Add support for PLL

* boards: hifive1-revb: Increase uart0 tx buff size and add getprime app

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-11 12:01:53 +00:00
Petro Karashchenko
813902cf87 arch/arm/src/am335x and boards/arm/am335x/beaglebone-black: Add I2C support for AM335X. 2019-12-10 20:22:25 -06:00
Ouss4
8ae156c8a1 boards/xtensa/esp32/esp32-core/README.txt: Update the toolchain installation help. 2019-12-10 13:44:28 -06:00
Gregory Nutt
897378bc29 Remove support for generation of RRLOAD binary files. The RRLOAD binary format was used with Linux BSPs from www.ridgerun.com circa 2000-2001. It is still need by the the c5471 board if that bootloader is used. Removes the CONFIG_RRLOAD_BINARY option and tools/mkimage.sh 
This change was motivated by the presence of the mkimage.sh file under tools.  That is the tool that created the RRLOAD binary format.  That bash script has a GPL license and, hence, may not be included in an Apache-licensed project.
 2019-12-09 11:29:12 -06:00
Gregory Nutt
b2035ebb1c boards/arm/imxrt/imxrt1020-evk/src/imxrt_autoleds.c: Must include imxrt1020-evk.h 2019-12-08 08:24:02 -06:00
Gregory Nutt
3e85a7e53d boards/arm/imxrt/imxrt10x0-evk/include/board.h and src/imxrt10x0-evk.h: Board internal GPIO definitions were erroneously moved to board.h in a previous comment. This restores them to where they belong in the private imxrt10x0-evk.h header file. 2019-12-08 08:02:31 -06:00
Masayuki Ishikawa
2cde7dcc8d Merged in masayuki2009/nuttx.nuttx/sparkfun_redv (pull request #1091) 
Sparkfun RED-V Things Plus

* board: hifive1-revb: Update README-qemu.txt

* arch: fe310: Works with SparkFun RED-V Things Plus

    Should work with HiFive1 Rev.B but not tested yet.

* boards: hifive1-revb: Works with SparkFun RED-V Things Plus

    Should work with HiFive1 Rev.B but not tested yet.

Approved-by: Alan Carvalho de Assis <acassis@gmail.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-08 12:42:48 +00:00
Gregory Nutt
dd55d4d8d6 board.h edited online with Bitbucket 
Fixes a stray chacter introduced in a previous commit.
 2019-12-08 12:26:55 +00:00
Brennan Ashton
56c68c4db6 boards/arm/imxrt/imxrt1020-evk: Fix several errors relation to USBOTG: pin definitions in include/board.h and include path for imxrt_usbotg.h in src/imxrt_usbhost.c. 2019-12-07 21:45:39 -06:00
Gregory Nutt
2437e68d88 boards/arm/stm32/nucleo-f4x1re/src: board.h must always be the last header file included. 2019-12-07 10:17:22 -06:00
Gregory Nutt
703b8303fc boards/arm/stm32/nucleo-f4x1re/include/board.h: board.h header files must never include architecture-specific header files. 2019-12-07 09:43:59 -06:00
Gregory Nutt
9e4602a2f4 drivers/mtd: Apply tools/nxstyle to a few files. Lots more to check. 2019-12-07 08:25:16 -06:00
Xiang Xiao
febf226992 boards/sim/sim/sim/src/sim_bringup.c: Auto mount binfs to /bin if CONFIG_FS_BINFS. 2019-12-05 08:50:59 -06:00
Guillherme Amaral
15f358d6a9 arch/arm/src/stm32f0l0g0: Fix PWM on TIM16 not working: Adjust TIM registers, Add pins available for mapping TIM14-17, CCMR2 registers was being handled for TIMs who do not have it, and Fix PWM frequency being doubled when in center-aligned mode. 2019-12-02 09:14:56 -06:00
Masayuki Ishikawa
f46e5d58d0 Merged in masayuki2009/nuttx.nuttx/fe310_updates (pull request #1085) 
fe310 updates

* arch: fe310: Rename CLIC to CLINT

* boards: hifive1-revb: Add README.txt

* arch: fe310: Use atomic operations in up_irq_save() and up_irq_enable()

* arch: fe310: Remove unused configs in Kconfig

* boards: hifive1-revb: Change UART0 buff size and remove debug features.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-02 14:45:41 +00:00
Masayuki Ishikawa
200770915e Merged in masayuki2009/nuttx.nuttx/spresense_with_elf (pull request #1082) 
boards: spresense: rndis and wifi configurations support elf

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-02 14:22:27 +00:00
Masayuki Ishikawa
a5501cf853 Merged in masayuki2009/nuttx.nuttx/riscv-updates (pull request #1080) 
riscv updates

* arch: risc-v: Remove up_dumpstate.c because the file had been merged into up_assert.c

* boards: gapuino: Modify Makefile which conforms to NuttX standards

* boards: nr5m100-nexys4: Modify Makefile which conforms to NuttX standards

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-12-01 13:01:04 +00:00
Gregory Nutt
108ffe7044 Within the OS, nxisg_sleep() should be used instead of sleep(). sleep() is a cancellation point and sets the errno value. Neither of which should be done inside the OS. 2019-11-29 19:03:24 -06:00
Gregory Nutt
03e41c6806 boards/: Within the OS, nxisg_usleep() should be used instead of usleep(). usleep() is a cancellation point and sets the errno value. Neither of which should be done inside the OS. 2019-11-29 17:47:03 -06:00
Dave Marples
f410d9711a boards/arm/imxrt/imxrt10x0-evk/include/board.h: Set up TRACE clocking correctly. This also reverts 7dcd57aa4a. 2019-11-29 14:54:08 -06:00
Gregory Nutt
6b66ac0e04 Some minor changes from review of last PR. 2019-11-28 14:45:16 -06:00
Masayuki Ishikawa
7a8e9581ca Merged in masayuki2009/nuttx.nuttx/hifive1-qemu (pull request #1078) 
HiFive1 with qemu

* arch: risc-v: Add include/.gitignore

* arch: risc-v: Add src/.gitignore

* arch: risc-v: Remove uncommon function prototypes in include/irq.h

* arch: risc-v: Add missing symbols and function prototypes in src/common/up_internal.h

* arch: risc-v: Add src/common/up_modifyreg32.c

* arch: risc-v: Enable include Make.dep in src/Makefile

* arch: risc-v: Fix stack coloration in common/up_createstack.c

* arch: risc-v: Add common/up_puts.c

* arch: risc-v: Add common/up_checkstack.c

* arch: rv32im: Move all logics from up_dumpstate.c to up_assert.c

    This change is same as other architectures like arm/src/armv7-m

* arch: Select ARCH_HAVE_STACKCHECK for RISC-V in Kconfig

* arch: risc-v: Add SiFive fe310 processor

    NOTE: Currently only tested with qemu

* boards: hifive1-revb: Add SiFive hifive1-revb board

    NOTE: Currently only tested with qemu

* tools: Add fe310 processor to configure.sh

Approved-by: Alan Carvalho de Assis <acassis@gmail.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-11-28 20:37:24 +00:00
Gregory Nutt
7dcd57aa4a boars/arm/imxrt/imxrt10x0-evk/include/board.h: Define IMXRT_TRACE_CLK_SELECT with arbitrary value just to get through build testing. 2019-11-28 11:18:42 -06:00
Gregory Nutt
f945edaf7a boards/sim/sim/sim: Remove apps/grephics/traveler configuration 2019-11-25 16:47:17 -06:00
Gregory Nutt
f691d774cc STM32 F7 SDMMC: Cosmetic changes from application of tools/nxstyle to all files modified in last PR. 2019-11-25 08:00:45 -06:00
OSer
56f8af5db3 Merged in OSer916/nuttx/stm32f746g_disco_sd_card (pull request #1075) 
Stm32f746g disco sd card

* arch/arm/src/stm32f7/stm32_sdmmc.c: fix compile error

* boards/arm/stm32f7/stm32f746g-disco: add SD/TF Card Support

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-11-25 13:54:45 +00:00
Ouss4
54e09340d5 boards/mips/pic32mz/pic32mz-starterkit/src/pic32mz_userleds.c: Use the pinset_t type when manipulating IOs. 2019-11-23 09:00:43 -06:00
Xiang Xiao
e0307fcd8f boards/sim/sim/sim/src/sim_bringup.c: Mount tmpfs to CONFIG_LIBC_TMPDIR in sim_bringup if CONFIG_FS_TMPFS is defined. 2019-11-23 07:58:50 -06:00
Gregory Nutt
27b6132601 Run files changed in last PR through tools/nxstyle, fix several coding standard violations. 2019-11-21 07:50:37 -06:00
OSer
e1f904c943 Merged in OSer916/nuttx/stm32f746g-disco-n25q (pull request #1074) 
stm32f746g-disco board add n25q128 support

* arch/arm/src/stm32f7/hardware/stm32f74xx75xx_pinmap.h: fix QSPI pin
    config.

* arch/arm/src/stm32f7/stm32_qspi.c: fix gpio_dumpgpioconfig() function,
    fix qspi_command() function

* boards/arm/stm32f7/stm32f746g-disco/README.txt: fix board path

* boards/arm/stm32f7/stm32f746g-disco: add n25q128 function

* boards/arm/stm32f7/stm32f746g-disco/scripts/Make.defs: use st-flash tool to write fireware on Linux

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2019-11-21 13:39:45 +00:00
Gregory Nutt
677b0bf47e Remove all support for the ancient Pascal compiler and pcode interpreter. 2019-11-21 06:58:38 -06:00
Gregory Nutt
bb6a3341aa boards/arm/stm32h7/nucleo-h743zi/src: Ran all .c and .h files through tools/nxstyle 2019-11-18 16:36:34 -06:00
Lwazi Dube
25aa695a35 Reviewed by David Sidrane. 
boards/arm/stm32h7/stm32h747i-disco:  Remove references to nucleo in the stm32h747i-disco board.
arch/arm/include/stm32h7, arch/arm/src/stm32h7, and boards/arm/stm32h7/stm32h747i-disco:  Add support for the STM32H747I-DISCO board.
 2019-11-18 14:03:38 -06:00
Gregory Nutt
3c707f6e71 boards/arm/imxrt/imxrt1060-evk/src/imxrt_lcd.c: Because board-private GPIO definitions have been moved to the public board.h (VERY BAD IDEA), breakage happened in all files that need GPIO definitions, but did not include board.h (which they should not have to). 2019-11-14 08:52:05 -06:00
Alin Jerpelea
64aff3bf6d boards/arm/lpc17xx_40xx/lincoln60/src/lincoln60.h: Fix ifdef string. The old configs folder was migrated to Boards/<arch> and we should fix the ifdef. 2019-11-12 08:13:39 -06:00
Alin Jerpelea
5e8eb7776d boards/arm/imxrt/imxrt1020-evk/src/imxrt1020-evk.h: Fix ifdef string. The old configs folder was migrated to Boards/<arch> and we should fix the ifdef. 2019-11-12 08:12:26 -06:00