arch: Allocate the space from the beginning in up_stack_frame
and modify the affected portion:
1.Correct the stack dump and check
2.Allocate tls_info_s by up_stack_frame too
3.Move the stack fork allocation from arch to sched
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
All supported arch uses a push-down stack:
The stack grows toward lower addresses in memory. The stack pointer
register points to the lowest, valid working address (the "top" of
the stack). Items on the stack are referenced as positive(include zero)
word offsets from sp.
Which means that for stack in the [begin, begin + size):
1.The initial SP point to begin + size
2.push equals sub and then store
3.pop equals load and then add
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
IRQs cannot be individually disabled on the eZ80, so using
`up_disable_irq()` had no effect. This left the IRQ handler being
constantly triggered without the lower half handler running.
The macro for EMAC stats was incompatible with Clang. The simplified
form gives identical results under ZDS-II.
The MII clock speed must be set before trying to read MII registers.
It's now done before resetting the PHY using the Mode Control Register.
MII initialization waited on the auto-neogotiate restart bit being set
but PHY hardware is frequently fast enough to have cleared the bit
before the first read of it. It now instead just waits on auto-negotiate
completing. The MII poll loop now uses `up_mdelay` because it was far
too fast at 50MHz using a busy loop, giving time for a link to be
established.
Bad packets are now processed enough to release their buffers back to
the EMAC hardware.
A few typos, unused variables, and other miscellaneous issues were also
fixed.
Summary:
- During repeating ostest with sabre-6quad:smp (QEMU),
I noticed that pthread_rwlock_test sometimes stops
- Finally, I found that nxtask_exit() released a critical
section too early before context switching which resulted in
selecting inappropriate TCB
- This commit fixes this issue by moving nxsched_resume_scheduler()
from nxtask_exit() to up_exit() and also removing
spin_setbit() and spin_clrbit() from nxtask_exit()
because the caller holds a critical section
- To be consistent with non-SMP cases, the above changes
were done for all CPU architectures
Impact:
- This commit affects all CPU architectures regardless of SMP
Testing:
- Tested with ostest with the following configs
- sabre-6quad:smp (QEMU, dev board), sabre-6quad:nsh (QEMU)
- spresense:wifi_smp
- sim:smp, sim:ostest
- maix-bit:smp (QEMU)
- esp32-devkitc:smp (QEMU)
- lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
In the current compilation environment, the recursive assignment(=) for compile
flags will be delayed until every file is actually need to be compile.
For example:
--------------------------------------------------------------------------------
arch/arm/src/Makefile:
INCLUDES += ${shell $(INCDIR) "$(CC)" $(ARCH_SRCDIR)$(DELIM)chip}
INCLUDES += ${shell $(INCDIR) "$(CC)" $(ARCH_SRCDIR)$(DELIM)common}
INCLUDES += ${shell $(INCDIR) "$(CC)" $(ARCH_SRCDIR)$(DELIM)$(ARCH_SUBDIR)}
INCLUDES += ${shell $(INCDIR) "$(CC)" $(TOPDIR)$(DELIM)sched}
CPPFLAGS += $(INCLUDES) $(EXTRAFLAGS)
CFLAGS += $(INCLUDES) $(EXTRAFLAGS)
CXXFLAGS += $(INCLUDES) $(EXTRAFLAGS)
AFLAGS += $(INCLUDES) $(EXTRAFLAGS)
--------------------------------------------------------------------------------
All compilation options will be included recursively,
which will be delayed until the compilation options are actually used:
tools/Config.mk:
--------------------------------------------------------------------------------
define COMPILE
@echo "CC: $1"
$(Q) $(CC) -c $(CFLAGS) $($(strip $1)_CFLAGS) $1 -o $2
endef
--------------------------------------------------------------------------------
All compile flags to be reexecuted $(INCDIR) as long as one file needs to be compiled,
but in fact, the compilation options have not changed in the current directory.
So the we recommand to change the syntax of assignment
From
Recursive (=)
To
Simple (:=)
In this way, we can ensure that all compilation options are expanded only once and reducing repeated works.
Signed-off-by: chao.an <anchao@xiaomi.com>
and remove the special handling in the stack dump
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia1ef9a427bd4c7f6cee9838d0445f29cfaca3998
1.Reduce the default size of task_group_s(~512B each task)
2.Scale better between simple and complex application
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia872137504fddcf64d89c48d6f0593d76d582710
to save the preserved space(1KB) and also avoid the heap overhead
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I694073f68e1bd63960cedeea1ddec441437be025
Make.dep file should be updated by .config changed after first make.
There are 2 cases affected for this problem:
1) Add source files by config symbol
2) Include header files in #ifdef directive
These 2 cases may not be included in Make.dep and this may prevent the
differential build from working correctly.
1.It make sense to let Toolchain.defs give the default value
2.The board can still change if the default isn't suitable
3.Avoid the same definition spread more than 200 Make.defs
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ic2649f1c7689bcf59c105ca8db61cad45b6e0e64
since exit will be only callable from userspace and change
the 1st argument from "const uint8_t *" to "const char *"
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I86487d57210ab63109148232da71dbc4d60a563b
ASAN trace:
...
==32087==ERROR: AddressSanitizer: heap-buffer-overflow on address 0xf4502120 at pc 0x56673ca3 bp 0xff9b6a08 sp 0xff9b69f8
WRITE of size 1 at 0xf4502120 thread T0
#0 0x56673ca2 in strcpy string/lib_strcpy.c:64
0xf4502120 is located 0 bytes to the right of 8224-byte region [0xf4500100,0xf4502120)
allocated by thread T0 here:
#0 0xf7a60f54 in malloc (/usr/lib32/libasan.so.4+0xe5f54)
#1 0x5667725d in up_create_stack sim/up_createstack.c:135
#2 0x56657ed8 in nxthread_create task/task_create.c:125
#3 0x566580bb in kthread_create task/task_create.c:297
#4 0x5665935f in work_start_highpri wqueue/kwork_hpthread.c:149
#5 0x56656f31 in nx_workqueues init/nx_bringup.c:181
#6 0x56656fc6 in nx_bringup init/nx_bringup.c:436
#7 0x56656e95 in nx_start init/nx_start.c:809
#8 0x566548d4 in main sim/up_head.c:95
#9 0xf763ae80 in __libc_start_main (/lib/i386-linux-gnu/libc.so.6+0x18e80)
CALLSTACK:
#8 0xf79de7a5 in __asan_report_store1 () from /usr/lib32/libasan.so.4
#9 0x565fd4d7 in strcpy (dest=0xf4a02121 "", src=0xf5c00895 "k") at string/lib_strcpy.c:64
#10 0x565e4eb2 in nxtask_setup_stackargs (tcb=0xf5c00810, argv=0x0) at task/task_setup.c:570
#11 0x565e50ff in nxtask_setup_arguments (tcb=0xf5c00810, name=0x5679e580 "hpwork", argv=0x0) at task/task_setup.c:714
#12 0x565e414e in nxthread_create (name=0x5679e580 "hpwork", ttype=2 '\002', priority=224, stack=0x0, stack_size=8192, entry=0x565e54e1 <work_hpthread>, argv=0x0) at task/task_create.c:143
#13 0x565e42e3 in kthread_create (name=0x5679e580 "hpwork", priority=224, stack_size=8192, entry=0x565e54e1 <work_hpthread>, argv=0x0) at task/task_create.c:297
#14 0x565e5557 in work_start_highpri () at wqueue/kwork_hpthread.c:149
#15 0x565e3e32 in nx_workqueues () at init/nx_bringup.c:181
#16 0x565e3ec7 in nx_bringup () at init/nx_bringup.c:436
#17 0x565e3d96 in nx_start () at init/nx_start.c:809
#18 0x565e3195 in main (argc=1, argv=0xffe6b954, envp=0xffe6b95c) at sim/up_head.c:95
Change-Id: I096f7952aae67d055daa737e967242eb217ef8ac
Signed-off-by: chao.an <anchao@xiaomi.com>
like other related macro(e.g. INTMAX_MIN, INTMAX_MAX...)
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I8863599960b1a9b1c22ae9c35735a379a4c745b0
utilize the call inside nxtask_exit instead, also move
nxsched_suspend_scheduler to nxtask_exit for symmetry
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I219fc15faf0026e452b0db3906aa40b40ac677f3
arch/z80/src/Makefile: Correct inclusion of non-existent file. This was not a problem before because there was '-' before the include. Problem revealed with '-' removed.
arch/z80/src/ez80/Toolchain.defs: Apparently there are not too many '"' in path definition.
tools/incdir.c: No space between -usrinc: or -sysinc: and the list of paths.
-Move task_init() and task_activate() prototypes from include/sched.h to include/nuttx/sched.h. These are internal OS functions and should not be exposed to the user.
-Remove references to task_init() and task_activate() from the User Manual.
-Rename task_init() to nxtask_init() since since it is an OS internal function
-Rename task_activate() to nxtask_activate since it is an OS internal function
All complaints fixed except for those that were not possible to fix:
- Used of Mixed case identifier in ESP32 files. These are references to Expressif ROM functions which are outside of the scope of NuttX.
- Remove per-thread errno from the TCB structure (pterrno)
- Remove get_errno() and set_errno() as functions. The macros are still available as stubs and will be needed in the future if we need to access the errno from a different address environment (KERNEL mode).
- Add errno value to the tls_info_s structure definitions
- Move sched/errno to libs/libc/errno. Replace old TCB access to the errno with TLS access to the errno.
So call 'make EXTRAFLAGS=-Wno-cpp' could suppress the warnings with pre-processor
directive #warning in GCC.
Change-Id: Iaa618238924c9969bf91db22117b39e6d2fc9bb6
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
Resolution of Issue 619 will require multiple steps, this part of the first step in that resolution: Every call to nxsem_wait_uninterruptible() must handle the return value from nxsem_wait_uninterruptible properly. This commit is for all I2C drivers under arch/.
arch/z80/src/ez80/ez80_timerisr.c: Correct a mismatch between the programmed reload value and the timer input clock frequency.
arch/z80/src/ez80/ez80f92.h: Correct error in timer input clock divider: Bits 2-3, not bits 3-4.
boards/z80/ez80/z20x/src/w25_main.c: Correct an uninitialized return value; private function was not declard static.
arch/z80/src/ez80/ez80f92_init.asm: Timer control register was not being cleared and, as a result, timer interrupts may have been already enabled when the CPU was started by the debugger. This would result in spurious interrupts and Unexpected Interrupt crashes.
arch/z80/src/comming/up_initialize.c: Fix a trivial typo.
While we are at it, change the license headers in all relevant files in the affected directories to the Apache 2.0 license. Run all affected files through nxstyle.
boards/z80/ez80/z20x: Increase RX buffer size to 4Kb, reduce BAUD to 2400 in w25boot configuration
arch/z80/src/ez80/ez80_serial.c: Reduce Rx FIFO trigger level for eZ80F92 to 1 so that will respond more quickly to incoming data.
boards/z80/ez80/z20x/src/w25_main.c: Improve user interface.
There is still an error occurring while downloading Intex HEX files to FLASH. That is unrelated to this and appears to be a problem libs/libc/hex2gbin/lib_hex2bin.c
arch/z80/src/ez80/ez80_timerisr.c: Fix an error that looks the file got damaged by a bad keystroke in the editor while a string was highlighted.
boards/z80/ez80/z20x/src/ez80_spi.c: Fix some bad conditional compilationi. Prevented W25 chip select from being initialized.
Commit 797e45d6bf attempted to reduce the frequency of SPI reconfiguration by keeping track of the current frequency and mode settings and changing these settings only when the new settings differ from the old settings.
However, the original commit neglected to save the new frequency setting and, hence, was not effective in what it was trying to do: Every time the SPI setfrequency() method was called, it still looked like a new frequency and the frequency was still reconfigured, even though it hadn't really changed.
arch/z80/src/ez80/ez80_spi.c: Add logic checks to eliminate unnecessary SPI reconfiguration.
arch/z80/src/ez80/ez80_timerisr.c and arch/z80/src/ez80/ez80f92.h: Fix numerous places where configurations began with CONFIGS_ instead of CONFIG_
arch/z80/src/ez80/ez80_spi.c: Do not configure SPI chip select pin. It is not used by the driver and configuring it just clobbers other usage of that pin. Add some additional debug outputs; correct some exiting debug outputs.
drivers/mtd/w25.c: Add some debug output.
boards/z80/ez80/z20x/src/ez80_w25.c: Correct SPI bus number used in initialization. Only SPI1 is supported.
arch/z80/src/ez80/ez80_timerisr.c: Some initial timer configuration fixes.
arch/z80/: include/ez80/irq.h, src/ez80/ez80f92_*.asm: Correct some comments related to vector address offsets.
boards/z80/ez80/z20x/scripts/z20x_loader.linkcmd: Fix RAM offset in linker script
Kconfig files. Repartition some functionality. Bootloader support will need to be provided in logic under arch/z80/src/ez80 so the critical configuration selections were moved the Kconfig file there.
arch/z80/src/ez80/ez80_i2c.h: Rename arch/z80/src/ez80/ez80f91_i2c.h. It is sharable by both ez80f91 and ez80f92.
arch/z80/src/ez80/: Add logic to perform an additional level of interrupt redirection. This is necessary because the the interrupt handling is part of the loader FLASH-based logic. In order to share interrupts with the program loaded into RAM by the loader, another layer or redirection is required to get control to the interrupt handlers in the loaded program. See ez809f2_loader.asm and ez80f92_program.asm
boards/z80/ez80/z20x/scripts: Reduce size of the interrupt re-direction buffer from 1Kb to 512b.
