These are basically the same from the esp32-devkitc board. As the
defconfigs do not make use of any board-specific peripheral, there
is no need to duplicate them in every ESP32 board.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
MCUboot support is no longer behind EXPERIMENTAL for the following
chips:
- ESP32
- ESP32-S2
- ESP32-S3
- ESP32-C3
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Summary:
- This commit adjusts TCP and UDP configurations based on
sabre-6quad/configs/netnsh/defconfig
Impact:
- sabre-6quad only
Testing:
- Tested with QEMU-7.1
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
This PR adds the existing Goodix GT9XX Touch Panel Driver to the Bringup Function for PINE64 PinePhone.
With this PR, LVGL Touchscreen Apps will respond to Touch Input on PinePhone.
### Modified Files
`boards/arm64/a64/pinephone/src/pinephone_bringup.c`: Added GT9XX Touch Panel Driver to PinePhone Bringup Function
`boards/arm64/a64/pinephone/src/Makefile`: Added `pinephone_touch.c` to the Makefile
`include/nuttx/input/gt9xx.h`: Fixed a comment in GT9XX Touch Panel Driver
### New Files
`boards/arm64/a64/pinephone/src/pinephone_touch.c`, `pinephone_touch.h`: Register GT9XX Touch Panel Driver on PinePhone
`boards/arm64/a64/pinephone/configs/lvgl/defconfig`: Added PinePhone Board Config `lvgl` to support LVGL Touchscreen Apps
### Updated Documentation
`Documentation/platforms/arm/a64/boards/pinephone/index.rst`: Added PinePhone Board Config `lvgl` for LVGL Touchscreen Apps
Summary:
- This commit adds knetnsh64 and knetnsh64_smp
Impact:
- None
Testing:
- Tested with ping, telnet and iperf on QEMU-7.1
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Move `SIM_I2CBUS_ID` and `SIM_SPIDEV_NAME` from board to arch.
This allows you not to rely on board configuration.
Signed-off-by: xinbingnan <xinbingnan@xiaomi.com>
1. Change IP address format to addr/prefix, to be compatible with both IPv4/IPv6.
- When adding address in CIDR type, netmask/route will be automatically added.
2. Since route of whole subnet is added automatically, not specifying NuttX's IP any more.
- Multiple NuttX simulators (with IP 10.0.1.x) attached to same bridge can surf the net at same time.
3. NAT66 is used to make sure it works even if host has only one IPv6 address.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
since mmap may exist in block_operations, but truncate may not,
moving mmap beforee truncate could make three struct more compatible
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
- Add mmap into file_operations and remove it from ioctl definitions.
- Add mm_map structure definitions to support future unmapping
- Modify all drivers to initialize the operations struct accordingly
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
- Add truncate into file_operations
- Move truncate to be common for mountpt_operations and file_operations
- Modify all drivers to initialize the operations struct accordingly
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
This PR fixes the missing pixels in the rendered output of the Frame Buffer Driver for PINE64 PinePhone.
We fix this by copying the RAM Frame Buffer to itself on Frame Buffer Update `FBIO_UPDATE`, which will refresh the display correctly over DMA / Display Engine / Timing Controller TCON0.
### Modified Files
`boards/arm64/a64/pinephone/Kconfig`: Add requirement for Frame Buffer Update `FB_UPDATE` for PinePhone LCD Display
`boards/arm64/a64/pinephone/src/pinephone_display.c`: Implement Frame Buffer Update `FBIO_UPDATE` by copying the RAM Frame Buffer to itself
