sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
10,376 Commits 1 Branch 0 Tags 291 MiB
bdb4893ced
Commit Graph

3518 Commits

Author SHA1 Message Date
Gregory Nutt
bdb4893ced Kinetis: Add architectural support for the K26Z128VLH4. From Derek B. Noonburg 2015-02-11 07:15:45 -06:00
Gregory Nutt
5bb723c2e1 LP17 Ethernet Driver: Fix some compile problems when IPv6 is enabled 2015-02-10 15:23:11 -06:00
Gregory Nutt
3859ee90f8 LPC17xx: Add IPv6 support to the LPC17 Ethernet driver. Untested... I no longer have a proper environment for LPC17 debug. 2015-02-10 14:04:08 -06:00
Gregory Nutt
601d99183b SAM4 Ethernet Driver: No supports operation using the high priority work queue so that packet processing can occur outside of interrupt level processing. 
SAM4E-EK: The nsh configuration now configures the Ethernet driver for execution on the HP work thread.
 2015-02-10 11:10:55 -06:00
Gregory Nutt
761d4bdbba Fix some warning 2015-02-09 18:24:31 -06:00
Gregory Nutt
4b74554fd2 Clone the SAMA5D4 IPv6 support to the SAM4E EMAC and SAMAd3 EMAC and GMAC drivers. 2015-02-09 17:16:55 -06:00
Gregory Nutt
4f9998b4a8 Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test. 2015-02-09 16:12:11 -06:00
Gregory Nutt
25067a58e8 SAMA5D Ethernet: Add support for CONFIG_NET_NOTINTS so that the driver can operate from the work queue thread instead of doing everything from the interrupt level. 2015-02-09 15:26:05 -06:00
Gregory Nutt
ac2a1f0bb1 ARMv7-A interrupt handler: Should not automatically re-enable interrupts on interrupt return. That interferes with the driver's ability to manage interrupts. 2015-02-09 15:24:31 -06:00
Gregory Nutt
94d3c68013 Oops... Conditioned on IPv4 wheren IPv6 was intended 2015-02-09 14:16:32 -06:00
Gregory Nutt
3384274087 Fix IPv4-dependend debug output 2015-02-09 13:18:31 -06:00
Gregory Nutt
66e456161f SAMA5D4 EMAC: Add support for Multicast address matching and IPv6 2015-02-09 10:50:38 -06:00
Gregory Nutt
ef2d314235 Add logic so that STM32 Ethernet drivier can avoid interrupt level processing and, instead, execute on the work thread. 2015-02-09 08:33:29 -06:00
Gregory Nutt
3465cb6138 SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville. 2015-02-08 06:53:24 -06:00
Gregory Nutt
93ed9dc8d3 STM32 SPI: Clean-up asymmetric configuration of SPI6 2015-02-07 18:59:06 -06:00
Gregory Nutt
6f335dc6c6 STM32 SPI: The source clock for SPI 4,5, and 6 should be PCLK2, not PCLK1 (for F411, F427, and F429). Per David Sidrane. 2015-02-07 13:59:45 -06:00
Gregory Nutt
8f4bbdd057 Updated Tiva ADC files 2015-02-06 16:56:12 -06:00
Gregory Nutt
2502835fe8 Tiva ADC: Add Kconfig options for ADC. From Calvin Maguranis 2015-02-05 19:05:13 -06:00
Gregory Nutt
0d316326c2 Tiva ADC: Partial build support. Still missing Kconfg changes 2015-02-05 18:01:18 -06:00
Gregory Nutt
9ad18d827e Tiva ADC: Adds a Tiva ADC driver. From Calvin Maguranis 2015-02-05 17:36:23 -06:00
Gregory Nutt
a122910566 Tiva ADC: Register definitiona header file from Calvin Maguranis 2015-02-05 16:29:17 -06:00
Gregory Nutt
971c5c98fe Adds support for TM4C123G timers; integrates with the TM4C123G Launchpad. From Calvin Maguranis 2015-02-05 13:51:32 -06:00
Gregory Nutt
c7f71c99a5 Networking: Changes need to build ICMPv6 'router' configuration on STM32 with network debug enabled 2015-02-05 11:47:56 -06:00
Gregory Nutt
cc63543b80 STM32: Add an IPv6 configuration for the STM32F4-Discovery board (witht he STM32-DISCO_BB base board). Verify that the STM32 Ethernet driver works with IPv6. 2015-02-05 11:21:04 -06:00
Gregory Nutt
a9c71630e1 Add IPv6 support to network driver skeleton and to SAMA5D4 Ethernet driver (which, unfortunately is still missing address filtering logi) 2015-02-05 10:49:32 -06:00
Gregory Nutt
6568d94902 ICMPv6: Add logic to behave like a router (if so configured): NuttX will not send the router advertisement message in response to any router solicitation messages. 2015-02-05 09:43:29 -06:00
Gregory Nutt
24d800398e Networking: Break out Ethernet definitions into a separate file; add IPv6 multicast addresses as common globals, Ethernet drivers need to filter link-local, all nodes Ethernet address 2015-02-04 14:51:20 -06:00
Gregory Nutt
72645e184d Minor update to Kconfig file selections 2015-02-04 08:21:32 -06:00
Gregory Nutt
778d326c51 Re-arrange condition logic from the last change to avoid having STM32-specific conditional logic outside of the STM32 sandbox. 2015-02-04 07:24:19 -06:00
Gregory Nutt
1c05245963 STM32: Add driver for STM32L162XX AES peripheral. Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com> 2015-02-04 06:49:05 -06:00
Gregory Nutt
c63c55ac3f EFM: Remove a misbehaving assertion. From Pierre-noel Bouteville 
Also remove spaces before and after paretheses to conform to coding standard.
 2015-02-03 13:34:37 -06:00
Gregory Nutt
59d5149de6 Remove and extra endif from the Kconfig 2015-02-03 12:46:40 -06:00
Gregory Nutt
1d534ff896 Convert the 64-bit usec limit to a 32-bit tick limit 2015-02-03 07:18:17 -06:00
Gregory Nutt
cabaf7399a SAM4CM: Add support for tickless operation 2015-02-03 07:00:54 -06:00
Gregory Nutt
a6f1dfa5b0 Remove execute privileges from some header files 2015-02-01 06:24:18 -06:00
Gregory Nutt
31adb7b4c1 EFM32 Add support of BURTC and add possibility of debug message of RMU: Pierre-noel Bouteville 2015-02-01 06:19:53 -06:00
Gregory Nutt
01c57668c9 Fix a missing quotation mark in configuration description 2015-01-30 12:28:04 -06:00
Gregory Nutt
b6d51ef26d EFM32: Logic to unconditionally enable LE clocking. Even you don't use core clock LE as source for LFA or LFB, to read are write any register not clocked by HFPERCLK or HFCORECLK, HFCORECLKLE should be enabled. From Pierre-noel Bouteville. 2015-01-30 07:44:49 -06:00
Gregory Nutt
0c47dbe92d ARM assembly language memcpy.S was not returning a value in R0 it is required to do. From David Sidrane 2015-01-29 06:36:53 -06:00
Gregory Nutt
80cfc0bdd3 Tiva Ethernet: Move place where interrupts are disabled. It is probably not possible, but the logic looks like it could leave interrupts disabled 2015-01-27 14:59:31 -06:00
Gregory Nutt
4146fdbe8f Recent changes to stm32_rtcc.c do not compile with STM32L15XX configurations. From Jussi Kivilinna. 2015-01-27 09:20:42 -06:00
Gregory Nutt
c74aaafc72 Disabling any of EXTI 5-9 interrupts was disabling interrupts for all EXTI 5-9. Same issue with EXTI 10-15. From Jussi Kivilinna. 2015-01-27 09:15:43 -06:00
Gregory Nutt
c16abdcd47 Get USART 2 & 3 working on lpc4357-evb. These changes are required to get USART 2 and 3 working on the Embest development board. From Toby Duckworth 2015-01-26 07:33:22 -06:00
Gregory Nutt
7e46e94546 Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless 2015-01-24 06:49:51 -06:00
Gregory Nutt
05c5c8c337 Add CONFIG_STACK_COLORATION that does the same thing as CONFIG_DEBUG_STACK but without enabling debug. From David Sidrane 2015-01-24 06:03:39 -06:00
Gregory Nutt
2f3fb08869 Add support for the EFM32 reset management unit (RMU). From Pierre-noel Bouteville 2015-01-23 15:25:10 -06:00
Gregory Nutt
7106469191 Armv7-M: Remove Px4-only setting of stack to 0xff. This is incompatible with standard NuttX stack montitoring logic 2015-01-22 10:09:10 -06:00
Gregory Nutt
1dd722f836 STM32 Ethernet: Port IPv6 address filtering from the Tiva TM4C driver 2015-01-21 15:04:39 -06:00
Gregory Nutt
32d2a4c548 All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called 2015-01-21 11:36:33 -06:00
Gregory Nutt
1ad73c52b1 Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address. 2015-01-20 15:52:25 -06:00