sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
10,376 Commits 1 Branch 0 Tags 291 MiB
bdb4893ced
Commit Graph

3518 Commits

Author SHA1 Message Date
Gregory Nutt
09b16e3819 Remove packaging indications for TM4C129 configuration variables 2014-12-16 16:22:52 -06:00
Gregory Nutt
18c61b6e64 Add TM4C129XNCZAD and TM4C1294NCPDT to the Tiva configuration system 2014-12-16 16:02:21 -06:00
Gregory Nutt
ae18f9dacd Unify sensor debug. ADX driver was using input debug; LM75 and QENCODE that their own custom debug. Now all use CONFIG_DEBUG_SENSOR, sndbg() 2014-12-16 09:54:32 -06:00
Gregory Nutt
ae29667564 More changes associated with GPIO interrupt for the KL architecture from Alan Carvalho de Assis 2014-12-13 17:30:25 -06:00
Gregory Nutt
47919eb274 Add GPIO interrupt capability for the KL architecture. The patch is almost the same as kinetis_pinirq.c, just minor modifications and rename kl_pinirq to kl_gpioirq to make it more generic to developers. From Alan Carvalho de Assis 2014-12-13 17:27:06 -06:00
Gregory Nutt
626fa0719a STM32 LTDC: Fix a typo in conditional compilation 2014-12-13 07:45:42 -06:00
Gregory Nutt
002d4c40a4 STM32 OTG HS DEV (in FS mode): Disable ULPI clock enable in RCC AHB1 Register. If Both ULPI and the FS clock enable bits are set in FS mode, then the ARM never awakens froom WFI due to a chip issue. From Ken Pettit 2014-12-13 07:44:13 -06:00
Gregory Nutt
a1e05721d8 Tiva I2C: Don't try to ACK and STOP on the same byte. Improve logic that suppresses STOP on a repeated start 2014-12-12 12:13:31 -06:00
Gregory Nutt
3ac6379bbe Tiva I2C: Legacy mode reset logic ommitted in last commit 2014-12-12 09:31:17 -06:00
Gregory Nutt
c8d1f87571 Tiva I2C: Add logic to reset I2C when busy hangs with busy 2014-12-12 09:26:10 -06:00
Gregory Nutt
fb6661aaa4 STM32 OTGHS Device: Fix for OTGHS core working in FS mode. From Ken Pettit 2014-12-12 07:43:32 -06:00
Gregory Nutt
1c569b85f8 Cosmetic change to force compliance with coding standard 2014-12-12 07:14:16 -06:00
Gregory Nutt
b818691a3a Tiva I2C: Fix how I2C transactions are started and some I2C error reporting 2014-12-11 12:31:42 -06:00
Gregory Nutt
a190aeeeba Tiva I2C: All SDA pins should be open drain, but all SCL pins should be digital output 2014-12-11 12:30:48 -06:00
Gregory Nutt
c7adcf5af2 Tiva I2C: Add register-level debug capability 2014-12-11 09:34:03 -06:00
Gregory Nutt
3958661ae5 Tiva I2C: Minor clean-up to I2C tracing 2014-12-11 08:11:32 -06:00
Gregory Nutt
475d2c3137 Tiva I2C: Fix error in assertion logic 2014-12-11 07:02:14 -06:00
Gregory Nutt
98d9ceb582 Tiva I2C: Add I2C options to Kconfig 2014-12-10 13:56:00 -06:00
Gregory Nutt
bf5179d0ac Tiva I2C: Add workaround for errata; clean up some error handling 2014-12-10 13:01:47 -06:00
Gregory Nutt
58d0e169c7 Tiva I2C: Driver is code complete but untested 2014-12-10 12:43:46 -06:00
Gregory Nutt
03e1ecd6aa Tiva i2C: Lots of compilation fixes 2014-12-10 08:47:34 -06:00
Gregory Nutt
86577c2282 Simplify I2C master/slave addresing to simplify driver development 2014-12-10 08:47:07 -06:00
Gregory Nutt
0daa071f2a Tiva I2C: Finishes initialization logic 2014-12-10 07:31:44 -06:00
Gregory Nutt
c16ab05135 Tiva: Do I2C clock initialization without using legacy registers. Necessary for I2C3-5 2014-12-09 15:28:10 -06:00
Gregory Nutt
20b4417e48 Add a little bit more Tiva I2C initialization logic 2014-12-09 14:48:24 -06:00
Gregory Nutt
b05fefc15a Fix typo in Tiva UART regiser address definition. SourceForge Ticket #37 2014-12-09 12:18:41 -06:00
Gregory Nutt
f5c124e081 Tiva: Add build framework and skeleton files for Tiva I2C driver. Initial commit is just the STM32 I2C driver with name changes and STM32-specific logic removed 2014-12-09 12:18:40 -06:00
Gregory Nutt
928bc5ca84 Update the Tiva I2C register definitions for the TM4C123 and TM4C129 2014-12-09 08:42:12 -06:00
Gregory Nutt
63ba9bdf17 Set the GPIO_SPEED_50MHz on all F2 and F4 SPI pin configurations. This is based on an F411 SPI1 errata but the fixed is generalized to all SPI and all F2 and F4 (let me know if this introduces any other issues). Discovered and fixed by Sebastien Lorquet after much consternation. 2014-12-08 09:51:52 -06:00
Gregory Nutt
1f2447502f SAMA5D3 Xplained: Add support for the Itead Joystick shield 2014-12-03 12:24:23 -06:00
Gregory Nutt
56a5d59a96 STM32: Add MCO configuration for the STM32L1xx. From Jussi Kivilinna 2014-12-02 10:19:37 -06:00
Gregory Nutt
4016ca3495 STM32L15: Fix typo in MCO pin definition. From Jussi Kivilinna 2014-12-02 10:18:02 -06:00
Gregory Nutt
1fa790cf8e Update comments 2014-11-29 15:28:28 -06:00
Gregory Nutt
dc4c66c2f1 STM32 F4 I2C: Port Tridge's I2C noise resiliance logic from the PX4 repository. 2014-11-29 13:37:45 -06:00
Gregory Nutt
997fa4b749 Fix one warning. There are a couple of others that look like real problems 2014-11-28 11:49:24 -06:00
Gregory Nutt
50285b91fe EFM32 Serial: Add support for termios TCGET and TCSET. For the moment, only set/get speed is implemetned. From Pierre-noel Bouteville 2014-11-27 19:14:10 -06:00
Gregory Nutt
2021130e35 Forgot too add file before last commit 2014-11-27 06:14:09 -06:00
Gregory Nutt
a1c8e97c12 Enable support for STM32F102. https://github.com/PX4/NuttX/pull/28.diff 2014-11-27 06:12:35 -06:00
Gregory Nutt
70981eb7d5 Initial support for the LPC4357-EVB provided by Toby Duckworth 2014-11-26 15:18:24 -06:00
Gregory Nutt
2994448d85 More fixes to problems noted by cppcheck. Some are kind of risky; some are real bugs. 2014-11-25 13:15:09 -06:00
Gregory Nutt
ad36e75a40 Fixes for more issues found by cppcheck 2014-11-24 17:00:26 -06:00
Gregory Nutt
7cfd619167 More bugs/warnings found by cppcheck 2014-11-24 13:24:51 -06:00
Gregory Nutt
1d2ec9d2bb Various issues/bugs detected by cppcheck 2014-11-24 12:59:52 -06:00
Gregory Nutt
fc804e29af I2C header file for the Freescale KL family. From Alan Carvalho de Assis. 2014-11-23 16:49:00 -06:00
Gregory Nutt
5d231b25f0 SAMA5D3 Xplained: Add an apps/examples/bridge configuration 2014-11-20 16:24:30 -06:00
Gregory Nutt
cba8179c28 STM32 F4 OTGHS device controller driver from Brennan Ashton 2014-11-20 07:19:04 -06:00
Gregory Nutt
2d51315e66 SAM EMAC: Fix typo in the check for successfull allocation of a timer 2014-11-18 14:20:31 -06:00
Gregory Nutt
2134d0df43 SAMA5D4-EK EMAC1: Correct name of EMAC1 configuration variable 2014-11-18 11:02:22 -06:00
Gregory Nutt
a03b6af57a Cosmetic fixes to comments 2014-11-18 07:19:10 -06:00
Gregory Nutt
a1598152d1 Update ChangeLog 2014-11-17 12:48:01 -06:00
Gregory Nutt
63526fb1ef Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all MCU Ethernet drivers 2014-11-16 08:10:06 -06:00
Gregory Nutt
c2c37abf47 EFM32 USART setup: Computation of BAUD includes shift; Eliminate additional shift. From Pierre-noel Bouteville 2014-11-16 07:57:57 -06:00
Gregory Nutt
1055ba464d SAM3/4: Add missing SPI0 clock configuartion macro for the SAM4S 2014-11-16 06:43:08 -06:00
Gregory Nutt
25a9005ce7 Remove use of NET_LL_HDRLEN from Ethernet drivers. Use ETH_HDRLEN instead 2014-11-15 09:05:34 -06:00
Gregory Nutt
388ef8db1a Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday 2014-11-15 08:22:51 -06:00
Gregory Nutt
66dbce8cf6 Cosmetic updates; updates to README 2014-11-14 09:54:00 -06:00
Gregory Nutt
db12ac1f14 EFM32: Finishes USB naming fixup. Still some missing initialization logic 2014-11-14 08:36:18 -06:00
Gregory Nutt
7358c3c641 EFM32: More USB naming updates. Still not finished 2014-11-14 07:20:13 -06:00
Gregory Nutt
9dc834e723 EFM32: More USB register name corrections. Still incomplete 2014-11-13 12:25:42 -06:00
Gregory Nutt
e6ff1518f6 EFM32: Finishes USB naming changes for device 2014-11-13 10:45:47 -06:00
Gregory Nutt
c3aadcdef5 Correct a typo in the STM32 OTGFS register bit definitions 2014-11-13 10:43:54 -06:00
Gregory Nutt
9160054188 EFM32: Tweaks to get EFM32GG-STK3700 running NSH over LEUART0 2014-11-12 12:50:09 -06:00
Gregory Nutt
984fffee1a EFM32: More USB register name corrections. Still incomplete 2014-11-12 10:43:29 -06:00
Gregory Nutt
9d0eb576c7 EFM32: More USB register name corrections. Still incomplete 2014-11-12 09:46:58 -06:00
Gregory Nutt
ae3485bf88 Remove the definition of INT_FAST32_MIN which is already defined in stdint.h (the correct location). From Lorenz Meier. 2014-11-12 07:47:37 -06:00
Gregory Nutt
c147913e27 Add protection from C++ name mangling in the ARM up_internal.h. From Lorenz Meier. 2014-11-12 07:27:28 -06:00
Gregory Nutt
f9ff3469f6 Fix a typo in an I2C header file. From Jahu Niskanen 2014-11-11 07:12:16 -06:00
Gregory Nutt
54245b1b9c Support for the STM32F103RG. From Murilo Ponte 2014-11-10 07:48:46 -06:00
Gregory Nutt
5073f3e951 EFM32: Reduce writes to the CTRL register 2014-11-09 09:43:43 -06:00
Gregory Nutt
fe7bdb284e EFM32: Fix issues associated with SPI bi order. From Pierre 2014-11-09 08:21:38 -06:00
Gregory Nutt
8e5ae2ee18 EFM32: Fix typo in connecting ODD GPIO interrupt. Noted by Pierre 2014-11-08 06:18:21 -06:00
Gregory Nutt
67f8002de9 EFM32 USB: More naming fixes... still does not compile 2014-11-05 14:22:12 -06:00
Gregory Nutt
4859d610dd EFM32 USB: A few more naming conversions... still a long way to go 2014-11-04 11:48:41 -06:00
Gregory Nutt
54fe538f25 EFM32: Port USB device and host drivers from STM32. Still does not compile 2014-11-04 10:14:04 -06:00
Gregory Nutt
e31947689d EFM32: Add USB build support 2014-11-04 06:47:14 -06:00
Gregory Nutt
e1fcd2b550 STM32GG Starter Kit: Add basic NSH configuration 2014-11-03 16:58:22 -06:00
Gregory Nutt
642bf34e45 Fix typo is SAM4E pinmap file 2014-11-03 11:59:53 -06:00
Gregory Nutt
0ae4ee8df5 EFM32 ROM table header files 2014-11-01 13:27:36 -06:00
Gregory Nutt
a968312262 EFM32: Add LESENSE header file 2014-11-01 12:56:55 -06:00
Gregory Nutt
de7d25efdf EFM32: Add USB header file 2014-11-01 11:57:11 -06:00
Gregory Nutt
e6c2a36bbe Add optional timestamp to syslog output. From pn_bouteville@yahoo.fr 2014-11-01 09:17:34 -06:00
Gregory Nutt
a86d86e866 Remove carriage returns 2014-11-01 08:06:50 -06:00
Gregory Nutt
0c0c059451 ARMv7-M: ETM header file 2014-11-01 08:06:06 -06:00
Gregory Nutt
180a8bf8f6 EFTM32 ITM: Add missing ~ in bit clear operation. From pn_bouteville@yahoo.fr 2014-11-01 06:51:14 -06:00
Gregory Nutt
e5f9501858 EFM32: Add LCD header file 2014-10-31 20:25:37 -06:00
Gregory Nutt
15ba15ad3b EFM32: Add DAC header file 2014-10-31 20:05:47 -06:00
Gregory Nutt
721f59b3be EFM32: Add BURTC header file 2014-10-31 13:05:00 -06:00
Gregory Nutt
141ac52984 EFM32: Add PRS signals 2014-10-31 12:30:01 -06:00
Gregory Nutt
fc7868e4f1 EFM32: Add ADC heder file 2014-10-31 12:22:45 -06:00
Gregory Nutt
fba66228f7 EFM32: Add I2C header file 2014-10-31 12:07:57 -06:00
Gregory Nutt
e97bdf6dc1 EFM32: Add PRS header file 2014-10-31 11:47:40 -06:00
Gregory Nutt
ac16ca1a9c EFM32: Add PCNT header file 2014-10-31 11:34:00 -06:00
Gregory Nutt
ac9889be07 EFM32: Add RMU header file 2014-10-31 11:17:12 -06:00
Gregory Nutt
9b9489c678 EFM32: Add EMU header file 2014-10-31 10:56:15 -06:00
Gregory Nutt
0924a813f7 EFM32: Add VCMP header file 2014-10-31 10:41:28 -06:00
Gregory Nutt
bf6b44a46e EFM32: Add RTC header file 2014-10-31 10:27:52 -06:00
Gregory Nutt
1bdb07fdf8 EFM32: Add AES header file 2014-10-31 10:17:48 -06:00
Gregory Nutt
ae1bb7bd57 EFM32: Add watchdog header file 2014-10-31 10:02:37 -06:00
Gregory Nutt
ad431a2935 EFM32: Add LETIMER header file 2014-10-31 09:54:26 -06:00
Gregory Nutt
496815ec51 EFM32: Add ACMP header file 2014-10-31 09:38:21 -06:00
Gregory Nutt
2b3944da60 EFM32: Add timer header file 2014-10-31 09:27:15 -06:00
Gregory Nutt
ac56c1924a EFM32: Changes picked up from Pierre's repository 2014-10-30 18:01:46 -06:00
Gregory Nutt
f76962257e Costmetic changes -- spacing, comments. 2014-10-30 16:33:40 -06:00
Gregory Nutt
87ee3f2fc7 SAM3/4: Fix error serial TERMIOS ioctl handling 2014-10-30 12:23:15 -06:00
Gregory Nutt
60a853df95 Add support for SAM3/4 basic TERMIOS and flow control. There are issues with IFLOW control: PDC or DMAC support is required 2014-10-29 15:47:15 -06:00
Gregory Nutt
a418aefe13 EFM32: In order to use LEUART, LE clocking must be enabled 2014-10-29 11:20:54 -06:00
Gregory Nutt
b388511137 EFM32: Various fixes for LEUART build 2014-10-29 09:37:39 -06:00
Gregory Nutt
47a8e614e8 EFM32: Minor serial interrupt mask change; Add LEUART0 board support 2014-10-29 08:04:29 -06:00
Gregory Nutt
0679d3109f EFM32: Implement HFPERCLK logic 2014-10-28 19:46:45 -06:00
Gregory Nutt
8a17a264ff Fix a few more EFM32 integration bugs 2014-10-28 19:02:21 -06:00
Gregory Nutt
761059aee2 SAM4: Fix a usbnsh build problem that has crept into all serial drivers 2014-10-28 15:44:47 -06:00
Gregory Nutt
b9814fac99 EFM32: Need to configure UART GPIOs as outputs 2014-10-28 14:50:15 -06:00
Gregory Nutt
ff85d95902 Oops... fix an error in an assertion of last commit 2014-10-28 12:42:19 -06:00
Gregory Nutt
4cc64a7405 EFM32: Add missing shift of register value 2014-10-28 12:36:47 -06:00
Gregory Nutt
9e773f396e EFM32: Fix GPIO configuration logic; Add missing board initializatin logic; Fix LED naming 2014-10-28 10:39:57 -06:00
Gregory Nutt
f2a2e6b645 EFM32G: Fix typo in memory map header file 2014-10-28 09:26:06 -06:00
Gregory Nutt
e01ceb3df8 SAM4E: Fix error TC header file 2014-10-28 09:22:37 -06:00
Gregory Nutt
947c896c45 EFM32: Correct a typo in LFXO bit in clock configuration 2014-10-28 08:59:27 -06:00
Gregory Nutt
1c8bf0c395 EFM32: Update a configuration; Compile fix for when DEBUG is enabled 2014-10-28 07:24:04 -06:00
Gregory Nutt
facf7e916e STM32 Serial: Don't compile up_earlyserialinit() if USE_EARLYSERIALINIT is not define. Otherwise, a macro definition clobbers the function definition 2014-10-28 06:58:37 -06:00
Gregory Nutt
6c9f325e1e Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS 2014-10-27 11:31:16 -06:00
Gregory Nutt
586a363391 Cosmetic... removed checks for non-existent configuration setting 2014-10-27 09:05:52 -06:00
Gregory Nutt
03663a7ac4 Cosmetic changes 2014-10-27 07:57:12 -06:00
Gregory Nutt
80efa803b9 EFM32 SPI: setfrequency() needs to return actual frequency; simplify nbits usages by removing conditional logic 2014-10-27 07:07:30 -06:00
Gregory Nutt
a7b9bf776e EFM32 SPI: Add check to make sure that the SPI RX buffer is empty before starting a transfer 2014-10-26 13:13:53 -06:00
Gregory Nutt
7569b596be EFM32 SPI: Change some logic that I fear could cause RX data overrun 2014-10-26 12:53:26 -06:00
Gregory Nutt
a022fd68e5 EFM32: Cosmetic changes to comments and format 2014-10-26 12:48:47 -06:00
Gregory Nutt
eeccd16a54 Cosmetic update to spacing and comments 2014-10-26 11:25:47 -06:00
Gregory Nutt
c392115fbd EFM32: Integrate SPI DMA capability 2014-10-26 11:22:16 -06:00
Gregory Nutt
741f98fe0a EFM32: Integrate Pierre's SPI driver 2014-10-26 09:27:55 -06:00
Gregory Nutt
0eb45e78f3 Remove unnecessary header file inclusion 2014-10-26 06:09:20 -06:00
Gregory Nutt
562b719f26 EFM32: dma_config_t needs to be only 16-bits for now 2014-10-25 17:53:29 -06:00
Gregory Nutt
d4f35ba41c EFM32 DMA: Cosmetic changes to debug instrumentatin and comments 2014-10-25 17:43:56 -06:00
Gregory Nutt
0a7924ba26 EFM32: Fix misconception in DMA control descriptor alignment 2014-10-25 17:21:58 -06:00
Gregory Nutt
b156685475 EFM32: More fixes to DMA descriptor table logic 2014-10-25 17:15:16 -06:00
Gregory Nutt
678dce33f6 Add debug assertion 2014-10-25 15:29:23 -06:00
Gregory Nutt
de08cc54fd EFM32: Correct handling of DMA descriptors; Add initialization of DMA CTRLBASE 2014-10-25 14:55:02 -06:00
Gregory Nutt
116129adf8 EFM32: Completes very basic DMA support. Needs review. Untested 2014-10-25 11:31:13 -06:00
Gregory Nutt
1502ba31b3 Dangle whitespace removal 2014-10-25 10:35:29 -06:00
Gregory Nutt
b9cf875752 EFM32: A little more DMA logic. Still incomplete 2014-10-25 10:34:07 -06:00
Gregory Nutt
f79e803e89 Add some logic to EFM32 DMA module. Still incomplete 2014-10-25 08:09:19 -06:00
Gregory Nutt
6c044cbf9b Add framework for EFM32 DMA support -- no logic in place yet 2014-10-24 17:59:13 -06:00
Gregory Nutt
889e80fe7a Fix some typos that I just introduced... Sometimes I can't do anything right 2014-10-24 17:58:33 -06:00
Gregory Nutt
7792b78072 Update EFM32 DMA header file for Gecko support 2014-10-24 16:58:38 -06:00
Gregory Nutt
9573023529 SAM4E-EK: Add support for PHY insterrupt 2014-10-24 12:28:57 -06:00
Gregory Nutt
6d4f448c31 Another fix to SAM3/4 GPIO IRQ issue 2014-10-24 10:55:52 -06:00
Gregory Nutt
69966a1b62 SAM3/4: Fix conditional compilation in GPIO IRQ logic 2014-10-24 10:44:43 -06:00
Gregory Nutt
b7a35c1e65 SAM4E: Fix options to select GPIO interrupts in Kconfig 2014-10-24 09:29:01 -06:00
Gregory Nutt
7c9b830d8d Add EFM32 DMA header file 2014-10-24 07:57:16 -06:00
Gregory Nutt
72d11583e3 Another typo in EMF32 GPIO logic 2014-10-23 19:19:58 -06:00
Gregory Nutt
bf565dc94b Fix compiler errors in up_itm_syslog.c. From Pierre-Noel Bouteville 2014-10-23 18:30:32 -06:00
Gregory Nutt
87a45f7f2f Fix file naming: arm_item_syslog.c changed to up_itm_syslog.c. From Pierre-Noel Bouteville 2014-10-23 18:25:05 -06:00
Gregory Nutt
9b13710e39 EFM32 port and pin decoding backward in every case. From Pierre-Noel Bouteville 2014-10-23 18:16:57 -06:00
Gregory Nutt
ddb16e08ec Oops last changes still in editor 2014-10-23 10:13:32 -06:00
Gregory Nutt
20476ade5e EFM32: Add configuration option to use USARTs as SPI 2014-10-23 08:54:26 -06:00
Gregory Nutt
85834ac1f1 EFM32: Add configuration option to use USARTs as SPI 2014-10-23 08:25:37 -06:00
Gregory Nutt
2cd7340e87 Update to the LPC43xx RIT/Tickless code. From Brandon Warhurst 2014-10-23 07:14:37 -06:00
Gregory Nutt
b5fc30f1e8 Add support for tickless operation using the NXP LPC43xx 2014-10-23 06:54:24 -06:00
Gregory Nutt
9df5ba14f2 EFM32: Add logic to initialize and use ITM system 2014-10-22 09:05:22 -06:00
Gregory Nutt
d1472cbf2a Remove whitespace and and carriage returns 2014-10-22 09:04:40 -06:00
Gregory Nutt
bfc12bf3a7 ARMv7: Add support to use ITM for SYSLOG debug output 2014-10-22 09:03:00 -06:00
Gregory Nutt
d98d1e9d21 Eliminate a warning 2014-10-22 07:56:48 -06:00
Gregory Nutt
0196b77961 EFM32: Add IDLE power management hooks. Nothing implemented; just define the hooks 2014-10-22 07:26:31 -06:00
Gregory Nutt
9ef8abc5ec Add ARMv7-M DWT and TPI register definitions 2014-10-21 16:46:26 -06:00
Gregory Nutt
d094fd1c19 Add CMSIS ITM header file and library 2014-10-21 16:16:00 -06:00
Gregory Nutt
d930f2cdbc EFM32: Add buton interrupt handling for the Olimex board 2014-10-21 13:51:30 -06:00
Gregory Nutt
37e08c3b49 The olimex-efm32g880f128-stk now defaults to use LEUART1 as the serial console. Also fixes lots of compile bugs from the original LEUART checkin 2014-10-21 11:38:51 -06:00
Gregory Nutt
d273686d42 EFM32: Add LFA and LFB clock support 2014-10-21 10:45:33 -06:00
Gregory Nutt
d13c9a08b9 EFM32: Add configuration support for LEUARTs 2014-10-21 09:37:02 -06:00
Gregory Nutt
d9abc779fe EFM32: Add a LEUART-based serial driver (untestee) 2014-10-21 09:21:03 -06:00
Gregory Nutt
2be00bbde2 EFM32: Add basic, low-level support for the low energy UARTs 2014-10-21 08:48:38 -06:00
Gregory Nutt
73874782db EFM32: Addred LEUART register definition header file 2014-10-21 08:11:03 -06:00
Gregory Nutt
6737c28066 Add ADC pinmap definitions for the STM32 F103R from Lederhilger Martin 2014-10-21 06:48:16 -06:00
Gregory Nutt
0e9955a37c Fixe to allow compile of lpc43_gpioint.c. It likely doesn't work. From Brandon warhurst_002 2014-10-21 06:36:27 -06:00
Gregory Nutt
5c20da2a34 stm32: rename spi frame format definition 
This renames the stm32 spi frame format definition to the short description
name as well as the other cr2 register flags.

Note! STM32_SPI3_FRF was never used by nuttx somewhere

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-10-20 15:12:59 -06:00
Gregory Nutt
f566c5ed53 EFM32: Another update to USART oversampling calculation. Clip to positive; update comments 2014-10-20 13:54:43 -06:00
Gregory Nutt
f754a51d15 Fix some naming 2014-10-20 12:29:28 -06:00
Gregory Nutt
09f6908aa1 EFM32 USART: Fix oversampling selection; Should be biased toward higher oversampling rates 2014-10-20 10:54:13 -06:00
Gregory Nutt
ba21728389 Finsh USART configuration logic 2014-10-20 08:12:08 -06:00
Gregory Nutt
735268d266 Add GPIO interrupt logic 2014-10-20 08:12:08 -06:00
Gregory Nutt
574840778f Trivial, cosmetic typos in comments 2014-10-20 08:12:07 -06:00
Gregory Nutt
b9a8456582 Add EFM32 serial driver 2014-10-19 18:55:44 -06:00
Gregory Nutt
5fa6188c55 Add some UART configuration logic (still incomplete) 2014-10-19 16:42:15 -06:00
Gregory Nutt
302e16223e Fleshes out GPIO configuration logic 2014-10-19 13:47:52 -06:00
Gregory Nutt
8125da0424 Add GPIO header file + a little bit of GPIO configuration logig 2014-10-19 13:07:52 -06:00
Gregory Nutt
6839ac9c60 Basic clock configuration logic 2014-10-19 11:08:56 -06:00
Gregory Nutt
95a544c166 Add MSC header file 2014-10-19 09:59:40 -06:00
Gregory Nutt
600726d661 Fix conditional logic in CMU header file 2014-10-19 06:46:35 -06:00
Gregory Nutt
c82488f1a0 Add frame for EFM32 GPIO logic (empty functions) 2014-10-18 18:40:08 -06:00
Gregory Nutt
7075a83ed7 Fix some incorrect conditional logic 2014-10-18 16:16:57 -06:00
Gregory Nutt
4355396d81 Add skeleton lowputc() file for EFM32 2014-10-18 16:16:48 -06:00
Gregory Nutt
534194aa68 Add skeleton lowputc() file for EFM32 2014-10-18 16:16:22 -06:00
Gregory Nutt
377c06c0ff Add EFM32 configuration header file 2014-10-18 16:15:53 -06:00
Gregory Nutt
7f83a5c6fd efm32_vectors.S is not really a HEAD object 2014-10-18 15:32:56 -06:00
Gregory Nutt
31db5d324b Add EFM32 SysTick timer support 2014-10-18 15:27:36 -06:00
Gregory Nutt
1f1c0c91b9 Add empty file for event EFM32 clock configuration logic 2014-10-18 15:22:11 -06:00
Gregory Nutt
2c2a3bee5a More framework for GPIO interrupt support 2014-10-18 14:05:07 -06:00
Gregory Nutt
c15f07dba3 Use UART0 for the serial console 2014-10-18 12:47:45 -06:00
Gregory Nutt
9dfa4ec117 Add EFM32 UART/USART header file 2014-10-18 11:13:03 -06:00
Gregory Nutt
f07970eba0 Oops committed the wrong version 2014-10-18 09:46:35 -06:00
Gregory Nutt
aae510ac5b Add EFM32 CMU header file 2014-10-18 09:26:56 -06:00
Gregory Nutt
452b1f3c3a Add EFM32 Memory Maps 2014-10-17 16:43:52 -06:00
Gregory Nutt
848ca3e9cc Add GPIO header file and EFM32 Gecko Starter Kit LED support 2014-10-17 14:17:44 -06:00
Gregory Nutt
c51fcc5323 More EFM32 files 2014-10-17 12:31:44 -06:00
Gregory Nutt
598ebd29a2 More EFM32 files and logic 2014-10-17 12:02:32 -06:00
Gregory Nutt
fd8a610e4d Add EFM32 interrupt vector defintions 2014-10-17 10:34:39 -06:00
Gregory Nutt
be389f411b Add configuration support for the EFM32 Gecko Starter Kit 2014-10-17 09:25:52 -06:00
Gregory Nutt
30e827d7d8 Enable selection of SPI2 for STM32L15XX in Kconfig. From Jussi Kivilinna 2014-10-16 07:03:23 -06:00
Gregory Nutt
66f3b0f85f Minor update to last Kconfig change 2014-10-15 12:33:37 -06:00
Gregory Nutt
d1f17269f4 Add Kconfig selections for STM32-F4x1RE SPI peripheral 2014-10-15 12:22:04 -06:00
Gregory Nutt
128b032a16 Fix file mode on modified files 2014-10-14 15:45:56 -06:00
Gregory Nutt
5a306e16fe Support for the STM32 F411RE from Serg Podtynnyi 2014-10-14 15:42:28 -06:00
Gregory Nutt
5134d0fea7 Cosmetic changes to comments 2014-10-10 16:54:47 -06:00
Gregory Nutt
d55d30b202 Fix a few typos 2014-10-10 11:41:40 -06:00
Gregory Nutt
afa548a1bc Fix watchdog stop bit usage. From Lazlo 2014-10-10 11:36:50 -06:00
Gregory Nutt
a1322602b3 Fix a typo in the lpc43 makefile, lpc43_usb0dev not lpc31_usb0dev 2014-10-09 17:59:42 -06:00
Gregory Nutt
0f07dfb6e5 Correct STM32 RTC EXTI bit definition. From Lazlo 2014-10-09 06:25:07 -06:00
Gregory Nutt
176491ce75 Misc changes to get a clean build after all of the syslog changes. There are probably other things still broken 2014-10-08 16:23:48 -06:00
Gregory Nutt
7b310711a1 Update everything under nuttx/arch to use the corrected syslog interfaces 2014-10-08 12:48:47 -06:00
Gregory Nutt
792e40f513 Simplification of conditional compilation suggested by pn_bouteville 2014-10-07 15:44:54 -06:00
Gregory Nutt
868fa211bc Remove non-functional vestiges of OTGHS in FS mode (including OTGFS2); try to convert the stm32f429i-disco configuration to use OTGHS instead of OTFHS in FS mode (OTGFS2). But I don't have the boards and can't test 2014-10-07 15:25:31 -06:00
Gregory Nutt
c448888810 Integrates OTGHS support into the STM32; Eliminates the older OTGHS in FS mode logic. From Brennan Ashton 2014-10-07 15:05:30 -06:00
Gregory Nutt
170e5c6134 Add files that implement true high speed support for the STM32 OTGHS peripheral. From Brennan Ashton 2014-10-07 15:01:42 -06:00
Gregory Nutt
87eb1d47ed Fix some recently introduced typos, build problems, and warnings 2014-10-05 16:58:52 -06:00
Gregory Nutt
e4deeada85 More vfork(): If we get to vfork() via system call, then we need to clone some system call information so that the return form the cloned system call works correctly 2014-09-29 10:59:15 -06:00
Gregory Nutt
1dc9768c1a Fix vfork(). Now that arguments are kept on the stack, the way that arguments are passed from parent to child in vfork() must change. This bug has always been present, but was not visible with the old strdup() way of passing arguments 2014-09-29 10:45:44 -06:00
Gregory Nutt
468097b3b9 This completes the implementation of shared memory support 2014-09-24 09:27:17 -06:00
Gregory Nutt
31329acede STM32 CAN correction suggested by Max Holtzberg 2014-09-24 08:23:05 -06:00
Gregory Nutt
dcdfd99a08 Build support for platform-specific shared memory logic. Not logic yet in place 2014-09-24 07:39:06 -06:00
Gregory Nutt
f6f7587c47 Build support for platform-specific shared memory logic. Not logic yet in place 2014-09-24 07:38:11 -06:00
Gregory Nutt
b33c2d9cef Move include/nuttx/mm.h to include/nuttx/mm/mm.h 2014-09-24 07:29:09 -06:00
Gregory Nutt
b542d1733f Cosmetic 2014-09-23 16:03:52 -06:00
Gregory Nutt
46b58dbb28 Extend virtual/physical address conversions to include addresses in shared memory. 2014-09-23 16:03:08 -06:00
Gregory Nutt
e326fcfef3 Fix some inconsistent field name in struct task_group_s: addrenv should be tg_addrenv. 2014-09-23 16:01:44 -06:00
Gregory Nutt
edbaed19f9 Add logic necessary to handler remapping of shared memory on contex switches 2014-09-23 13:19:30 -06:00
Gregory Nutt
5e285b8bc4 More NxWM build fixes 2014-09-20 16:47:00 -06:00
Gregory Nutt
ffb60d064b More naming changes to get the stm3240g-eval/nxterm configuration building again 2014-09-20 15:53:28 -06:00
Gregory Nutt
942aaf6c31 SAMA5D4-EK/nsh: WM8904 support enabled; README updated 2014-09-18 14:29:20 -06:00
Gregory Nutt
d7ae119684 Ooops... a file that I forgot to add yesterday 2014-09-17 09:52:07 -06:00
Gregory Nutt
b37c0a832a Fixes to avoid some hang conditions using STM32 CAN 2014-09-17 08:35:03 -06:00
Gregory Nutt
82381dbdc6 Only SAM4 family has RTTDIS bit in the MR register. SourceForge bug #33 from Fabien Comte 2014-09-17 07:42:12 -06:00
Gregory Nutt
311a88e819 Add a sharable version of arm_virtpgaddr() 2014-09-16 16:49:44 -06:00
Gregory Nutt
925fc9ad81 First round of changes to get the ELF configuration building again 2014-09-16 15:37:05 -06:00
Gregory Nutt
2defa2d45c These files were deleted and moved to a different location (see previos commit) 2014-09-16 13:36:51 -06:00
Gregory Nutt
af2efda031 remove tailing blank line 2014-09-16 13:36:14 -06:00
Gregory Nutt
d4d1534b5a Move common/up_signal_dispatch.c to armv6-m, armv7-m, and armv7-a. The armv7-a version needs to be different to handle the case where we are dispatch kernel mode signals when running under a user mode group 2014-09-16 13:35:29 -06:00
Gregory Nutt
058229b626 Correct stack handling is signal deliver to user processes 2014-09-16 13:33:13 -06:00
Gregory Nutt
0bedf06b49 Move some share-able logic from sama5/sam_pgalloc.c to armv7-a/arm_physpgaddr.c 2014-09-16 13:31:48 -06:00
Gregory Nutt
9a49f05087 Move some share-able logic from sama5/sam_pgalloc.c to armv7-a/arm_physpgaddr.c 2014-09-16 13:31:24 -06:00
Gregory Nutt
b627c70492 Move some share-able logic from sama5/sam_pgalloc.c to armv7-a/arm_physpgaddr.c 2014-09-16 13:29:43 -06:00