Gregory Nutt
be008484e7
STM32 F7: Port the STM32 F3 serial driver to the STM32 F7
2015-07-19 09:25:27 -06:00
Gregory Nutt
7241185e13
STM32 F7: Add DMA header files
2015-07-19 07:34:09 -06:00
Gregory Nutt
08c883b6e8
STM32 F7: Add low level serial console support
2015-07-18 16:24:02 -06:00
Gregory Nutt
d64058d36e
STM32 F7: Bring in other EXTI related files from STM32 F4
2015-07-18 16:00:00 -06:00
Gregory Nutt
5f9b0b3a2f
STM32 F7: Add USART/UART register definition
2015-07-18 15:58:59 -06:00
Gregory Nutt
12f04f8500
STM32 F7: Add heap initializatino logic; Clone the STM32 CCM allocator as the F7 DTCM allocator
2015-07-18 12:52:24 -06:00
Gregory Nutt
465d7fe8c5
STM32 F7: Add PWR register definitions
2015-07-18 11:55:35 -06:00
David Sidrane
5e1a50c93e
STM32: Oops. Some STM32 F7 edits accidentally went into STM32 files ;(. Fixed by David Sidrane
2015-07-18 11:05:44 -06:00
Gregory Nutt
4a5f66481d
STM32 F7: Add FLASH and SYSCFG header files
2015-07-18 10:06:44 -06:00
Gregory Nutt
4f307ba36a
STM32F7: Clone GPIO support from the STM32 F4
2015-07-18 08:34:07 -06:00
Gregory Nutt
9c78772fce
STM32 F7: Add RCC clock configuration logic from STM32 F429
2015-07-17 17:39:33 -06:00
Gregory Nutt
cbaf241078
STM32 F7: Fix input clock source to SysTick
2015-07-17 16:38:47 -06:00
Gregory Nutt
6f5aa9ae21
STM32F7: Add GPIO header files
2015-07-17 15:43:51 -06:00
Gregory Nutt
d722792487
STM32 F7: Add RCC header files
2015-07-17 13:52:10 -06:00
Gregory Nutt
f45f0ab59a
STM32 RCC: Fix some more typos in STM32 RCC header files
2015-07-17 12:16:29 -06:00
Gregory Nutt
bd711c038d
STM32 RCC: Fix what looks like a double paste
2015-07-17 12:00:46 -06:00
Gregory Nutt
7eb5e7f9ec
STM32F746G-DISCO: Getting closer to a build
2015-07-17 11:47:16 -06:00
Sebastien Lorquet
7f7082f938
Extend STM32 Ethernet operating frequency to 180MHz:
...
-Extend frequency range options to 180 MHz for STM32 ETH_MACMIIA_CR
-Fix a typo in a frequency range option in LPC43
-Only configure the PPS GPIO if the PTP protocol is enabled
From Sebastien Lorquet
2015-07-17 07:44:12 -06:00
Gregory Nutt
8e4f3bddb6
Add CONFIG_NETDEV_LATEINIT that can be used to suppress calls to up_netinitialize() from early initialization
2015-07-17 07:20:16 -06:00
Gregory Nutt
a7a7ec8850
STM32 F7: Misc naming fixes
2015-07-16 19:49:20 -06:00
Gregory Nutt
3583f8c1dc
STM32 F7: Add more configuration selections
2015-07-16 18:30:40 -06:00
Gregory Nutt
05676a233c
STM32 F7: Add pin multiplexing definitions
2015-07-16 16:31:02 -06:00
Gregory Nutt
d8915e9dc6
Add include/chip.h definitions and configuration support for the STM32 F7
2015-07-16 08:47:25 -06:00
Gregory Nutt
eb64a6c238
Add STM32 F7 memory map header file
2015-07-15 16:24:03 -06:00
Gregory Nutt
2bdca23c92
STM32F7: Bring over a couple more Cortex-M7 files from SAMV7
2015-07-15 14:51:41 -06:00
Gregory Nutt
be16a06857
Create a src directory for the STM32F7 (not much in it yet)
2015-07-15 14:32:28 -06:00
Gregory Nutt
1ed5f5a3ed
STM32: Move STM32F42xxx IRQ definitions out of stm32f40xxx_irq.h into their own stm32f42xxx_irq.h header file
2015-07-15 13:52:20 -06:00
Gregory Nutt
629b37deec
STM32: Fix a minor error in new STMF42* header files
2015-07-15 13:21:39 -06:00
Gregory Nutt
abbfbb0716
STM32: Move STM32F42xxx vector definitions out of stm32f40xxx_vector.h into their own stm32f42xxx_vector.h header file
2015-07-15 13:02:55 -06:00
Gregory Nutt
0d0bbafbc5
STM32: Move STM32F42xxx SYSCFG definitions out of stm32f40xxx_syscfg.h into their own stm32f42xxx_syscfg.h header file
2015-07-15 12:54:15 -06:00
Gregory Nutt
7666fde938
STM32: Move STM32F42xxx RCC definitions out of stm32f40xxx_rcc.h into their own stm32f42xxx_rcc.h header file
2015-07-15 12:50:04 -06:00
Gregory Nutt
987c010c1f
STM32: Move STM32F42xxx DMA definitions out of stm32f40xxx_dma.h into their own stm32f42xxx_dma.h header file
2015-07-15 12:38:33 -06:00
Gregory Nutt
1d7789caa6
STM32: Move STM32F42xxx pinmap definitions out of stm32f40xxx_pinmap.h into their own stm32f42xxx pinmap.h header file
2015-07-15 12:28:45 -06:00
Gregory Nutt
3efe60bb6d
STM32 F7: Add interrupt vector definitions
2015-07-15 10:54:03 -06:00
Alan Carvalho de Assis
3f68755997
SAML21" Fix small typo. It should be 2-Wire I2C instead of 1-Wire. From Alan Carvalho de Assis.
2015-07-12 12:17:42 -06:00
Alan Carvalho de Assis
82fd1536a6
AMDL: Add support to Peripheral as Output with Read back. From Alan Carvalho de Assis.
2015-07-12 09:23:40 -06:00
Gregory Nutt
1f5e16dc95
Fix some warnings/errors detected by nuttx/tools/testbuilds.sh
2015-07-10 18:41:26 -06:00
Janne Rosberg
3fdfae16b7
samdl/sam_usb.h: fix USBDEV_CTRLB_SPDCONF defines Datasheet 03-2015 and 06-2015 is wrong. These defines are correct verified with analyser and also same values are used on Atmel xdk-asf-3.24.2 sources. From Janne Rosberg.
2015-07-10 15:23:41 -06:00
Janne Rosberg
02979feb7b
samdl/saml_usb.h: fix wrong EP offset calculation. From Janne Rosberg
2015-07-10 15:21:37 -06:00
Janne Rosberg
b32d747212
Fix some typos. From Janne Rosberg
2015-07-10 15:19:24 -06:00
Janne Rosberg
d6a51360f1
samdl: fix USBDEV_PKTSIZE_BCNT size. From Janne Rosberg
2015-07-10 15:15:55 -06:00
Alessandro Temil
d4cd35af5f
More changes to LPC3450 pin configuration: The hardware ETM pins will not toggle unless the SLEW FAST bit is set. From Alessandro Temil.
2015-07-09 13:36:22 -06:00
Alessandro Temil
d687bedf36
Correct some LPC4350 GPIO pin configurations. From Alessandro Temil
2015-07-09 12:09:00 -06:00
Gregory Nutt
56e4189a73
SAMD21: Correct some GCLK ID definitions for SERCOM
2015-07-06 09:26:49 -06:00
Gregory Nutt
ef5531b30b
SAMD21: Last fix to header files caused a compile problem because logic used a value which is no longer available for the SAMD21
2015-07-04 13:18:30 -06:00
Gregory Nutt
724c1eacaa
Add support for a BOARDIOC_RESET boardctl() command. Enable configuration options to support BOARDIOC_RESET for ARMv6-M and ARMv7-M
2015-07-04 10:39:24 -06:00
Gregory Nutt
36ddd9f691
Simulatin: Save the intial terminal mode and restore this before terminating. Otherwise, the NSH shutdown command leaves the console in raw mode
2015-07-04 08:43:10 -06:00
Gregory Nutt
749907cbbe
sim configuration: Add support for board_app_initialize() which is needed when CONFIG_LIB_BOARDCTL=y
2015-07-04 08:16:45 -06:00
Gregory Nutt
8db3a7a13e
Add a board_app_initilize() stub function needed by the simulatin when CONFIG_LIB_BOARDCTL=y
2015-07-04 07:35:14 -06:00
Gregory Nutt
37e681f89a
Implementment board_power_off() for the simulation platform.
2015-07-04 07:22:38 -06:00
