Commit Graph

3955 Commits

Author SHA1 Message Date
Gregory Nutt
be008484e7 STM32 F7: Port the STM32 F3 serial driver to the STM32 F7 2015-07-19 09:25:27 -06:00
Gregory Nutt
7241185e13 STM32 F7: Add DMA header files 2015-07-19 07:34:09 -06:00
Gregory Nutt
08c883b6e8 STM32 F7: Add low level serial console support 2015-07-18 16:24:02 -06:00
Gregory Nutt
d64058d36e STM32 F7: Bring in other EXTI related files from STM32 F4 2015-07-18 16:00:00 -06:00
Gregory Nutt
5f9b0b3a2f STM32 F7: Add USART/UART register definition 2015-07-18 15:58:59 -06:00
Gregory Nutt
12f04f8500 STM32 F7: Add heap initializatino logic; Clone the STM32 CCM allocator as the F7 DTCM allocator 2015-07-18 12:52:24 -06:00
Gregory Nutt
465d7fe8c5 STM32 F7: Add PWR register definitions 2015-07-18 11:55:35 -06:00
Gregory Nutt
4a5f66481d STM32 F7: Add FLASH and SYSCFG header files 2015-07-18 10:06:44 -06:00
Gregory Nutt
4f307ba36a STM32F7: Clone GPIO support from the STM32 F4 2015-07-18 08:34:07 -06:00
Gregory Nutt
9c78772fce STM32 F7: Add RCC clock configuration logic from STM32 F429 2015-07-17 17:39:33 -06:00
Gregory Nutt
cbaf241078 STM32 F7: Fix input clock source to SysTick 2015-07-17 16:38:47 -06:00
Gregory Nutt
6f5aa9ae21 STM32F7: Add GPIO header files 2015-07-17 15:43:51 -06:00
Gregory Nutt
d722792487 STM32 F7: Add RCC header files 2015-07-17 13:52:10 -06:00
Gregory Nutt
f45f0ab59a STM32 RCC: Fix some more typos in STM32 RCC header files 2015-07-17 12:16:29 -06:00
Gregory Nutt
bd711c038d STM32 RCC: Fix what looks like a double paste 2015-07-17 12:00:46 -06:00
Gregory Nutt
7eb5e7f9ec STM32F746G-DISCO: Getting closer to a build 2015-07-17 11:47:16 -06:00
Sebastien Lorquet
7f7082f938 Extend STM32 Ethernet operating frequency to 180MHz:
-Extend frequency range options to 180 MHz for STM32 ETH_MACMIIA_CR
-Fix a typo in a frequency range option in LPC43
-Only configure the PPS GPIO if the PTP protocol is enabled

From Sebastien Lorquet
2015-07-17 07:44:12 -06:00
Gregory Nutt
8e4f3bddb6 Add CONFIG_NETDEV_LATEINIT that can be used to suppress calls to up_netinitialize() from early initialization 2015-07-17 07:20:16 -06:00
Gregory Nutt
a7a7ec8850 STM32 F7: Misc naming fixes 2015-07-16 19:49:20 -06:00
Gregory Nutt
3583f8c1dc STM32 F7: Add more configuration selections 2015-07-16 18:30:40 -06:00
Gregory Nutt
05676a233c STM32 F7: Add pin multiplexing definitions 2015-07-16 16:31:02 -06:00
Gregory Nutt
eb64a6c238 Add STM32 F7 memory map header file 2015-07-15 16:24:03 -06:00
Gregory Nutt
2bdca23c92 STM32F7: Bring over a couple more Cortex-M7 files from SAMV7 2015-07-15 14:51:41 -06:00
Gregory Nutt
be16a06857 Create a src directory for the STM32F7 (not much in it yet) 2015-07-15 14:32:28 -06:00
Gregory Nutt
1ed5f5a3ed STM32: Move STM32F42xxx IRQ definitions out of stm32f40xxx_irq.h into their own stm32f42xxx_irq.h header file 2015-07-15 13:52:20 -06:00
Gregory Nutt
629b37deec STM32: Fix a minor error in new STMF42* header files 2015-07-15 13:21:39 -06:00
Gregory Nutt
abbfbb0716 STM32: Move STM32F42xxx vector definitions out of stm32f40xxx_vector.h into their own stm32f42xxx_vector.h header file 2015-07-15 13:02:55 -06:00
Gregory Nutt
0d0bbafbc5 STM32: Move STM32F42xxx SYSCFG definitions out of stm32f40xxx_syscfg.h into their own stm32f42xxx_syscfg.h header file 2015-07-15 12:54:15 -06:00
Gregory Nutt
7666fde938 STM32: Move STM32F42xxx RCC definitions out of stm32f40xxx_rcc.h into their own stm32f42xxx_rcc.h header file 2015-07-15 12:50:04 -06:00
Gregory Nutt
987c010c1f STM32: Move STM32F42xxx DMA definitions out of stm32f40xxx_dma.h into their own stm32f42xxx_dma.h header file 2015-07-15 12:38:33 -06:00
Gregory Nutt
1d7789caa6 STM32: Move STM32F42xxx pinmap definitions out of stm32f40xxx_pinmap.h into their own stm32f42xxx pinmap.h header file 2015-07-15 12:28:45 -06:00
Alan Carvalho de Assis
3f68755997 SAML21" Fix small typo. It should be 2-Wire I2C instead of 1-Wire. From Alan Carvalho de Assis. 2015-07-12 12:17:42 -06:00
Alan Carvalho de Assis
82fd1536a6 AMDL: Add support to Peripheral as Output with Read back. From Alan Carvalho de Assis. 2015-07-12 09:23:40 -06:00
Gregory Nutt
1f5e16dc95 Fix some warnings/errors detected by nuttx/tools/testbuilds.sh 2015-07-10 18:41:26 -06:00
Janne Rosberg
3fdfae16b7 samdl/sam_usb.h: fix USBDEV_CTRLB_SPDCONF defines Datasheet 03-2015 and 06-2015 is wrong. These defines are correct verified with analyser and also same values are used on Atmel xdk-asf-3.24.2 sources. From Janne Rosberg. 2015-07-10 15:23:41 -06:00
Janne Rosberg
02979feb7b samdl/saml_usb.h: fix wrong EP offset calculation. From Janne Rosberg 2015-07-10 15:21:37 -06:00
Janne Rosberg
b32d747212 Fix some typos. From Janne Rosberg 2015-07-10 15:19:24 -06:00
Janne Rosberg
d6a51360f1 samdl: fix USBDEV_PKTSIZE_BCNT size. From Janne Rosberg 2015-07-10 15:15:55 -06:00
Alessandro Temil
d4cd35af5f More changes to LPC3450 pin configuration: The hardware ETM pins will not toggle unless the SLEW FAST bit is set. From Alessandro Temil. 2015-07-09 13:36:22 -06:00
Alessandro Temil
d687bedf36 Correct some LPC4350 GPIO pin configurations. From Alessandro Temil 2015-07-09 12:09:00 -06:00
Gregory Nutt
56e4189a73 SAMD21: Correct some GCLK ID definitions for SERCOM 2015-07-06 09:26:49 -06:00
Gregory Nutt
ef5531b30b SAMD21: Last fix to header files caused a compile problem because logic used a value which is no longer available for the SAMD21 2015-07-04 13:18:30 -06:00
Gregory Nutt
724c1eacaa Add support for a BOARDIOC_RESET boardctl() command. Enable configuration options to support BOARDIOC_RESET for ARMv6-M and ARMv7-M 2015-07-04 10:39:24 -06:00
Gregory Nutt
2e5bef56f2 SAMD20/1: Fix some typos found by inspecting header files 2015-07-04 07:19:52 -06:00
Gregory Nutt
b8976adfb3 SAM4L: GPIO interrupts are not yet supported; can't compile sam_gpioirq.c yet 2015-07-03 09:33:52 -06:00
Gregory Nutt
004c076985 Correct some issues introduced in the last commit 2015-07-02 17:54:05 -06:00
Gregory Nutt
c3290fdabd Modify board_power_off() so that is is called only via boardctl() 2015-07-02 17:09:54 -06:00
Gregory Nutt
19320d157a Move prototype of board_power_off() to include/nuttx/board.h where it belongs 2015-07-02 16:25:31 -06:00
Gregory Nutt
51df91e93d STM32 RTCC: Eliminate a warning when ALARM support is enabled 2015-07-02 15:02:59 -06:00
Gregory Nutt
1839d132f0 Add a dummy arch_invalidate_icache because for symmetry in the naming of cache operations 2015-07-02 11:13:23 -06:00