This driver is used with QEMU, to make it possible
to use networking.
This is not the MAC in ESP32, however, it can be used with QEMU.
The code was shamelessly copied from 31dac92e5f
this partly revert 4123615621 which works OK for PCI serial and network cards
but breaks QEMU EDU due to usage of sem and usleep in IDLE thread context.
Another solution will be provided later.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
When an application is being loaded `up_addrenv_create ` calls
`create_region` to create the address environment. Only the first
entry is mapped when the region is created. Virtual memory that is
not mapped will trigger an exception when accessed. Other memory
pages are allocated and mapped on-demand. This enables setting
larger heap and stack for the process without compromising the
overall system memory.
Current `CONFIG_PAGING` refers to an experimental implementation
to enable embedded MCUs with some limited RAM space to execute
large programs from some non-random access media.
On-demand paging should be implemented for the kernel mode with
address environment implementation enabled.
We will first check whether the target file path exists. If it does not exist, we will check whether the common exists. If not, we will restore the path that should be spliced at the beginning.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
We'll look for ETC resources from two paths
1.board/src/etc
2.common/etc
Search for the content in the board/src/etc directory first
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Previously we need turn off the PMP locks in K230 vendor u-boot to use
NuttX, this complicates the setup process. This patch supports running
NuttX with original vendor u-boot so that to reduce setup complexity.
It also enables empty NSH prompt string in AMP master config as the apps
side support is ready.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
DEBUG_FULLOPT enables many x86 related optimizations which can
be broken in many ways (eg. not aligned stack).
With this change it's easier to catch changes that breaks x86_64.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
Align _ebss to 16, otherwise g_idle_topstack is not correctly aligned.
For some reason the previous alignment worked with make buit but in case
of cmake with optimization enabled, the IDLE stack was misaligned which
caused vector instruction misalignment exception.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
This patch update documents to reflect the fact that remote node is kicked
off by master node. It also adds debug dump to aid the MISA reading issue
investigation.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Add support for tricore TC397
1. Porting based on AURIX TC397 KIT_A2G_TC397_5V_TFT evaluation board
https://www.infineon.com/cms/en/product/evaluation-boards/kit_a2g_tc397_5v_tft/
2. In order to avoid license and coding style issues, The chip-level code
still uses the implementation of AURIX Development Studio SDK.
The SDK package will be downloaded as a third-party package during compilation:
https://github.com/anchao/tc397_sdk
3. Single core only, SMP implementation will be provided in the future.
4. Implemented the basic System Timer, ASCLIN UART driver.
5. Only the Tasking tool chain is supported (ctc/ltc, license maybe required)
6. 'ostest' can be completed on the TC397 development board.
How to run?
1. Setup the tasking toolchain and license
$ export TSK_LICENSE_KEY_SW160800=d22f-7473-ff5d-1b70
$ export TSK_LICENSE_SERVER=192.168.36.12:9090
2. Build nuttx ELF
$ ./tools/configure.sh tc397/nsh
$ make -j
...
artc I800: creating archive libc_fpu.a
LD: nuttx
3. Switch to windows PC, setup AURIX-studio to Debugger Launcher
4. Replace runing ELF to nuttx, and re-download ELF
Signed-off-by: chao an <anchao@lixiang.com>
This patch adds inter-processor interrupt support using K230 mailbox
device to improve the RPMsg efficiency. The polling logic has been
dropped.
Major changes:
- in arch/risc-v/include/k230:
- irq.h add IRQ for IPI devices
- in arch/risc-v/src/k230:
- Kconfig add IPI related config, increase polling delay
- Make.defs add k230_ipi.c to CHIP_SRCS
- k230_hart.c fix typo, add notes of zero MISA reading w/ NUTTSBI
- k230_irq.c use K230_PLIC_IRQS as ext IRQ limit to support IPI
- k230_rptun.c use IPI instead of polling
- in boards/risc-v/k230/canmv230/configs
- master enable IPI support
- remote enable IPI, TMPFS, RPMSGFS etc
New additions:
- in arch/risc-v/src/k230:
- k230_ipi.h add K230 IPI related defintions
- k230_ipi.c add K230 IPI driver
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
The board's microphone uses 24-bit i2s and this commit also fixes
the segmentation fault caused by the audio buffer overflow.
arch/xtensa/src/esp32/esp32_i2s.c: Fix bug regarding 24-bit audio and add AUDIOIOC_STOP to ioctl
drivers/audio/audio_i2s.c: Report number of channels on AUDIOIOC_GETCAPS
in boards/xtensa/esp32/esp32-sparrow-kit:
/configs/nsh/defconfig: Add I2S configs
/src/esp32-sparrow-kit.h: Add the signature of esp32_i2sdev_initialize()
/src/esp32_bringup.c: Add call to esp32_i2sdev_initialize()
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
This commit implements the RMT peripheral for all the supported
Espressif's RISC-V devices. It also implements the support for the
WS2812 addressable RGB LED using the RMT peripheral.
This commit adds support to autoleds and userleds for
raspberrypi-pico board. It uses the board LED connected
to GPIO 25.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
Simply the config, later we can directly use macro SIM_RPMSG_MASTER
to controll all the rpmsg transport init.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
This patch revises `k230_hart.[ch]` by:
- revising big core boot/stop control.
- making k230_hart_is_big() available in S-mode.
- adding more comments.
This patch also revises the `ld-kernel.script` so that to match the
latest MMU pgtable design.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
K230 chip has two T-Head C908 RiscV cores, previously we run NuttX
on either little or big cores. This patch runs NuttX on both cores
with OpenAMP support via the RPTUN driver.
New additions:
- in arch/risc-v/src/k230
- k230_rptun.c K230 RPTUN driver
- k230_rptun.h K230 RPTUN driver header file
- in baords/risc-v/k230/canmv230
- configs/master Build config for master node
- configs/remote Build config for remote node
- scripts/ld-rptun.script Build script for RPTUN
Major changes:
- arch/risc-v/Kconfig Select NUTTSBI_LATE_INIT upon NUTTSBI
- in arch/risc-v/include
- k230/irq.h Add UART3 IRQ defs
- in arch/risc-v/src/k230
- Kconfig Add RPTUN related config items
- Make.defs Add k230-rptun.c to sources
- hardware/k230_memorymap.h Add K230 device and CSR defs
- k230_hart.c Add hart ctrl for RPTUN
- k230_hart.h Add hart ctrl for RPTUN
- k230_mm_init.c Add Svpmbt to support RPTUN
- k230_start.c Revised to support RPMsg UART
- in boards/risc-v/k230/canmv230
- scripts/Make.defs Add RPTUN script selection
- src/canmv_init.c Add RPTUN and RPMsg_UART initialization
- in Documentation/platforms/risc-v/k230/boards/canmv230
- index.rst Add AMP usage information.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
I recently imported NuttX version 6.0 (and nsh) into a Microchip
Studio project [1] on Windows to figure out what was going wrong with
the avr32dev1 build. I also briefly checked NuttX version 10.
I worked with the assumption that the avr32 (avr32dev1) specific
changes to the codebase were minimal across NuttX releases.
For the initial proof of concept I used Microchip Studio version 7.0
(with the recent Microchip's ASF updates). I use avr32-gcc (4.4.7)
hosted here [2] for building NuttX for avr32dev1 on GNU/Linux.
Even with the Microchip Studio project, I had initial debug problems
with just stepping through the code a line at a time. I had to bring
in crt0, a trampoline stub and the linker file from one of my older
projects to really build on the suspicion I had with the linker file.
Perhaps an older version of avr32-gcc did something differently. I am
not sure about this. I used avr32-objdump to see the output sections
of the generated elf file. I just had to tweak the linker script to
ensure correct linking of the sections.
With those changes, I was able to inspect the UART sections within
NuttX Microchip Studio project.
Second important change: the transmit pin: I had to reassign the pin
to see the nsh console.
These are the currently assigned UART pins:
RX: PA_24 -> Physical IC pin 59
TX: PB_02 -> Physical IC pin 24
For the avr32dev1 board, they are pins: J1 (berg pin 28) and J2 (berg
pin 10).
In addition, the PR fixes silly compilation problems with avr32dev1.
I have tested the nsh build with my avr32dev1 boards. I used Atmel ICE
to program one of them (flash at 0x80000000) and dfu-programmer to
test my other board (flash at 0x80002000). The other RS-232 parameters
are the same as they were.
References:
[1]: https://github.com/ramangopalan/nuttx_avr32dev1
[2]: https://github.com/ramangopalan/avr32-gnu-toolchain-linux_x86_64
Summary:
- This commit adds nxrecorder to netnsh/netnsh_smp/netnsh64/
netnsh64_smp defconfigs.
Impact:
- None
Testing:
- Tested with qemu-8.2.0 on Raspi4B with USB Audio
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adds nxrecorder to netnsh/netnsh_hv/netnsh_smp/
netnsh_smp_hv defconfigs.
Impact:
- None
Testing:
- Tested with qemu-8.2.0 on Raspi4B with USB Audio
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
As long as the GNSS feature is not used, GNSS RAM can be used as general memory.
This memory is 640KByte total, which is lower performance than the application RAM.
It is possible to locate text, data and bss into GNSS RAM and to use as heap area.
Since there were some cases in which the current modem reset
sequence did not reset the modem, the reset was ensured by
executing power off and power on of the modem.
Enable with ./tools/configure.sh -l esp32-devkitc:dac
DAC channel 0 = GPIO 25
DAC channel 1 = GPIO 26
default path: /dev/dac0
Resolution 8 bits = values 0~255
Voltage: 0~Vref
The reference voltage 'Vref' here is input from the pin VDD3P3_RTC
which ideally equals to the power supply VDD (3.3V).
Weak function sometimes can't have strong implementation linked.
This patch uses NUTTSBI_LATE_INIT config and normal function instead
to avoid those issues.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
