nuttx

Author	SHA1	Message	Date
Gregory Nutt	c300f27130	arch/arm/include/armv7-m/nvicpri.h: In the 'normal' case, the priority of the SVCALL interrupt was the same as the priority of the high priority interrupt. This means that SVCALL interrupt processing can defer the high priority interrupt and result in the jitter in that interrupt response. Fix is to raise the priority of the high priority interrupt above the priority of the SVCALL interrupt. Suggested by Nathan Hartman.	2019-08-09 07:07:16 -06:00
Gregory Nutt	72f56baafd	README.txt: Update for new boards/ sub-directory layout.	2019-08-08 16:23:55 -06:00
Gregory Nutt	143382d2a6	Documentation/README.html: Update for new boards/ sub-directory layout.	2019-08-08 15:36:59 -06:00
Gregory Nutt	f75fba05e7	tools/testbuild.sh: Remove some recently introduced echo's that clutter the build test output	2019-08-08 12:37:37 -06:00
David Sidrane	786d3453a2	Merged in david_s5/nuttx/master_f7_eth (pull request #970 ) stm32f7:ethernet add timeout on MAC reset Approved-by: Gregory Nutt <gnutt@nuttx.org>	2019-08-08 16:17:57 +00:00
Gregory Nutt	8f3e024ef7	boards/arm/lpc17xx_40xx/u-blox-c027/configs/nsh/defconfig: Remove stray character in defconfig file.	2019-08-08 10:13:55 -06:00
Gregory Nutt	74c17076c7	Documentation: Update some documents affected by the change in the organization of the boards/ sub-directory.	2019-08-08 10:05:34 -06:00
Gregory Nutt	2730714774	Update more comments and README.txt files to reflect new organization of the boards/ sub-directory.	2019-08-08 09:17:04 -06:00
Alin Jerpelea	66565a69a7	Merged in alinjerpelea/nuttx (pull request #969 ) avr: hc: mips: codestyle fixes * avr: codestyle fixes After the board restructuration is time for codestyle cleanup Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * hc: codestyle fixes After the board restructuration is time for codestyle cleanup Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mips: codestyle fixes After the board restructuration is time for codestyle cleanup Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>	2019-08-08 14:53:04 +00:00
Gregory Nutt	240926c995	Beginning to update comments to reflect new organization of the boards/ sub-directory.	2019-08-08 08:46:54 -06:00
Markus Bernet	1e0987a729	drivers/sensors/sht3x.c: Add Sensirion SHT3x driver.	2019-08-08 07:34:15 -06:00
Gregory Nutt	eaaa73198b	boards/Board.mk: Correct a simulator included path problem introduced by reorganization of arch/sim/src.	2019-08-08 07:17:43 -06:00
Nathan Hartman	2f0a3b6d75	arch/arm/src/tiva/common/tiva_timerlib.c: Fix one code error and some comment errors. tiva_timer16_setinterval(): Was DEBUGASSERTing on mode != TIMER16_MODE. Fixed to DEBUGASSERT on mode == TIMER16_MODE.	2019-08-07 18:58:45 -06:00
Gregory Nutt	ad122066ea	defconfigs: All paths assigned to CONFIG_PASS1_BUILDIR must include the chip name.	2019-08-07 18:17:43 -06:00
Gregory Nutt	4635e238c7	tools/testbuld.sh: Fix a copy/paste error	2019-08-07 17:56:32 -06:00
Gregory Nutt	4b6f634a90	tools/: Update and verify all configuration related tools with new, boards directory layout.	2019-08-07 17:25:54 -06:00
Gregory Nutt	c840ac2496	arch/sim: Even though the simulation has no chips, it needs to have CONFIG_ARCH_CHIP and chip sub-directories. Otherwise, we would have to treat it as a special case in the build system.	2019-08-07 16:05:00 -06:00
Gregory Nutt	8ecb72ded6	Add defconfig files must include CONFIG_ARCH_CHIP= to break and chicken-and-egg problem.	2019-08-07 15:37:35 -06:00
Alin Jerpelea	1358e829ad	Merged in alinjerpelea/nuttx (pull request #967 ) group boards based on chip * a1x: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * am335x: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * c5471: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * scx56xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * dm320: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * efm32: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * imx6: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * imxrt: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * kinetis: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * kl: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lc823450: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc17xx_40xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc214x: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc2378: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc31xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc43xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc54xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * max326xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * moxart: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nrf52: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nuc1xx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam34: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samd2l2: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samd5e5: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samv7: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f0l0g0: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f7: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32h7: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l4: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * str71x: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tiva: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tms570: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * xmc4: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * p112: typo fix this boars is a z80 board and was moved to the wrong arch Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * avr: at32uc3: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * avr: at90usb: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * avr: atmega: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * hc: mcs92s12ne64: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mips: pic32mx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mips: pic32mz: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * misoc: lm32: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * or1k: mor1kx: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * renesas: m32262f8: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * renesas: sh7032: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * risk-v: gap8: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * risk-v: nr5m100: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sim: sim: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * x86: qemu: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * xtensa: esp32: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z16: z16f2811: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z80: ez80: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z80: z180: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z80: z80: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z80: z8: group boards based on chip All boards based on the same chip are moved to the same folder following the arch layout <arch>/<chip>/<board>. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tools: update tools for boards based on chip This patch updates only the linux tools Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * pcduino-a10: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * beaglebone-black: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * c5471evm: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * spresense: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ntosd-dm320: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * efm32-g8xx-stk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * efm32gg-stk3700: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-efm32g880f128-stk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sabre-6quad: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * imxrt1050-evk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * imxrt1060-evk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k28f: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k64f: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k66f: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * kwikstik-k40: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * teensy-3.x: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * twr-k60n512: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * twr-k64f120m: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-kl25z: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-kl26z: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * teensy-lc: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lc823450: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lincoln60: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4088-devkit: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4088-quickstart: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpcxpresso-lpc1768: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mbed: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mcb1700: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-lpc1766stk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * open1788: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * pnev5180b: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * u-blox-c027: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * zkit-arm-1769: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mcu123-lpc214x: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * zp214xpa: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-lpc2378: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ea3131: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ea3152: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-lpc-h3131: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * bambino-200e: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4330-xplorer: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4337-ws: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4337-evb: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4370-link2: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpcxpresso-lpc54628: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * max32660-evsys: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * moxa: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nrf52-generic: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nutiny-nuc120: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arduino-due: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * flipnclick-sam3x: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam3u-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4cmp-db: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4e-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4l-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4s-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4s-xplained-pro: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d2-xult: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d3-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d3x-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d4-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samd20-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samd21-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * saml21-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * metro-m4: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * same70-xplained: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * same71-xult: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * axoloti: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * clicker2-stm32: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * cloudctrl: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * fire-stm32v2: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * hymini-stm32v: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * maple: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mikroe-stm32f4: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f103rb: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f207zg: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f302r8: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f303re: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f303ze: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f334r8: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f410rb: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f446re: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f4x1re: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-1152re: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-e407: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-h405: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-h407: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-p107: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-p207: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-p407: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * omnibusf4: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * photon: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * shenzou: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm3210e-eval: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm3220g-eval: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm3240g-eval: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32_tiny: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32butterfly2: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f103-minimum: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f334-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f3discovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f411e-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f429i-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f4discovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32ldiscovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32vldiscovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * viewtool-stm32f107: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * b-l072z-lrwan1: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f072rb: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f091rc: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f071rg: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l073rz: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f051-discovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f072-discovery: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-144: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f746-ws: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f746g-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f746g-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-h743zi: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * b-l475e-iot01a: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l432kc: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l432re: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l476rg: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l496zg: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l476-mdk: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l476vg-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l4r9ai-disco: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-strp711: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * dk-tm4c129x: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * eagle100: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ekk-lm3s9b96: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * launchxl-cc1310: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * launchxl-cc1312r1: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm3s6432-s2e: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm3s6965-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm3s8962-ek: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm4f120-launchpad: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm4c123g-launchpad: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm4c1294-launchpad: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * launchxl-tms57004: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tms570ls31x-usb-kit: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * xmc4500-relax: defconfig update add ARCH_CHIP to defconfig Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * zp214xpa: typo fix add missing tools/oocd.sh Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>	2019-08-07 20:49:39 +00:00
Augusto Fraga Giachero	a1f1adb878	arch/arm/src/lpc17xx_40xx/lpc17_40_ethernet.c: Fix the initialization for DP83848x PHYs. The DP83848x requires the RMII mode to be manually enabled through the MII_DP83848C_RBR register. Before querying the speed and mode it should wait for the link to be established.	2019-08-07 09:22:50 -06:00
Augusto Fraga Giachero	41d3ef5f1b	arch/arm/src/lpc17xx_40xx/lpc17_40_ethernet.c: Follow the procedure listed in the LPC176x/5x User Manual when reading from and writing to the PHY's registers (section 10.11.14). I couldn't see any behavioral change after this commit, but nonetheless is a good practice to follow the manufacturer's recommended procedure.	2019-08-07 09:01:10 -06:00
Augusto Fraga Giachero	17518b4a7d	arch/arm/src/lpc17xx_40xx/Kconfig: Add missing LPC17_40_PHY_CEMENT_DISABLE config to the lpc17xx Kconfig file. For some reason this config wasn't referenced anywhere else except in arch/arm/src/lpc17xx_40xx/lpc17_40_ethernet.c.	2019-08-07 08:59:38 -06:00
David Sidrane	7a85cf1728	fs/procfs/fs_procfsuptime: Fixed type warning.	2019-08-07 07:56:10 -06:00
David Sidrane	1e90dd9284	net/socket/getpeername: Fixed warning in DEBUG code.	2019-08-07 07:53:56 -06:00
Nathan Hartman	06f693965c	Tiva: Fix errors in low-level timer support arch/arm/src/tiva/common/tiva_timerlib.c: * tiva_gptm_configure() and tiva_gptm_release(): Fix error: Was calling tiva_emac_periphrdy() instead of tiva_gptm_periphrdy(). arch/arm/src/tiva/tiva_timer.h: * Fix error in "abcde" description of bit flag defines.	2019-08-07 07:35:37 -06:00
Nathan Hartman	162e2e1c65	arch/arm/src/tiva/common/tiva_timerlib.c: Fix minor errors in tiva_timerlib Fix incorrect preprocessor conditionals related to Kconfig defines: * CONFIG_TIVA_TIMER32_EDGECOUNT -> CONFIG_TIVA_TIMER16_EDGECOUNT * CONFIG_TIVA_TIMER32_TIMECAP -> CONFIG_TIVA_TIMER16_TIMECAP * CONFIG_TIVA_TIMER32_PWM -> CONFIG_TIVA_TIMER16_PWM	2019-08-06 17:09:42 -06:00
David S. Alessio	ced0dc1e16	arch/arm/src/armv7-m: Add ARMv7-M setjmp/longjump functions.	2019-08-06 15:59:19 -06:00
Gregory Nutt	ec5120f69e	sched/group and syscall/: Implement 'real' setuid, getuid, setgid, and getgid interfaces. These will be inheritance by all child task groups.	2019-08-06 14:13:43 -06:00
Gregory Nutt	945e27d85c	libs/libc/unistd.h: Add getuid() and getgid() to match Michael Jung's setuid() and setgid().	2019-08-06 12:38:43 -06:00
Gregory Nutt	c92da140eb	boards/arm: Update patches to linker scripts in kernel/Makefile files.	2019-08-06 12:09:04 -06:00
Gregory Nutt	207e5072ef	defconfigs: pathes assigned to CONFIG_PASS1_BUILDIR must now include the architecture.	2019-08-06 11:06:28 -06:00
Gregory Nutt	78fe3a3906	tools/configure.sh: Needs to be able to run from the tools sub-directory.	2019-08-06 10:51:39 -06:00
Gregory Nutt	d4d67ec425	tools/: Update configuration-related tools for last change to boards/ directory organization.	2019-08-06 10:39:12 -06:00
Alin Jerpelea	af28821c77	Merged in alinjerpelea/nuttx (pull request #966 ) group boards by architecture * z80: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z16: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * xtensa: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * x86: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sim: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * risc-v: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * renesas: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * or1k: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * misoc: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mips: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * hc: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * avr: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arm: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * boards: group boards by architecture Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>	2019-08-06 14:37:27 +00:00
Gregory Nutt	c6b5049e3e	tools/configure.sh: Restore support for custom, out-of-tree configurations that was broken in a previous commit.	2019-08-06 08:36:40 -06:00
Markus Bernet	f1462d2a2f	arch/arm/src/stm32h7: Fix UART7/8 typos. Fix bug in ETH_MACQTXFCR configuration.	2019-08-06 07:37:55 -06:00
Yang ChungFan	4db8c826d7	drivers/pipes: Use inode reference counter instead of device reference counter to handle dup(). I found that if I dup() a pipe, the reference counter d_refs is not increased. If I close any of the fd, backed by the same pipe, the pipe will be freed. This causes any further usage on the fd referencing a non existent pipe. This change uses the inode reference counter, which is properly maintained during dup().	2019-08-06 07:31:57 -06:00
Michael Jung	e8af615578	libs/libc/unistd: Stubs for setuid and setgid. Added stubbed implementations of setuid and setgid. These functions are essentially stubs pretending that NuttX supported users and groups and that the only configured user and group in the system were both 'root' with a uid and a gid of 0, respectively. The intent is not to provide meaningful new features, but to ease porting of foreign source code to NuttX.	2019-08-06 07:17:23 -06:00
김정찬	a12f80fb90	sched/mqueue/mq_desclose.c: Add a test to verify that message queue is closed by the same task group that opened it. If not, then list corruption would result. This test is only performed if CONFIG_DEBUG_FEATURES is enabled since it should not normally be an issue: It would be a strange programming practice to open a message queue in open task group, then close it in another.	2019-08-05 18:30:07 -06:00
Gregory Nutt	721994846c	tools/: Change preferred argument of configurations tools to use ':' as the delimiter between <board-name> and <config-name>. This is to emphasize that this is not a path; it is configuration specification. The legacy '/' delimiter is still supported but not recommend and not advertised. Squashed commit of the following: Update configurations instructions in more README.txt files to show ':' delimiter vs '/' delimiter. Update configurations instructions in various README.txt file to show ':' delimiter vs '/' delimiter. tools: Update all configuration-related tools to accept ':' separator between board and configuration name.	2019-08-05 16:55:51 -06:00
Gregory Nutt	0de938a190	tools/configure.sh and .c: When dumping available configurations, omit the 'config/' in the path.	2019-08-05 16:55:49 -06:00
David Sidrane	1881a7216e	Merged in david_s5/nuttx/master_kinetis_i2c_fix_txfer (pull request #965 ) kinetis:i2c transfer ensure correct result returned kinetis_i2c_transfer released the mutex then fetched the state, this resulted in returning the correct results. Approved-by: Gregory Nutt <gnutt@nuttx.org>	2019-08-05 20:31:34 +00:00
Gregory Nutt	cb1672a05a	boards/: Fix more comments related to the reorganization of the board configuration directories.	2019-08-05 10:48:10 -06:00
Gregory Nutt	aa49f831be	tools/refresh.sh: Fix the configuratin refresh script for changes to configuration paths.	2019-08-05 10:18:07 -06:00
Gregory Nutt	e12c133a53	Change references to boards/<board>/<config> to boards/<board>/configs/<config> in comments, Documentation, URLs.	2019-08-05 10:16:02 -06:00
Gregory Nutt	e1588f6cc2	tools/testbuild.sh: Fixes needed for changes to boards/ directory structure.	2019-08-05 09:14:30 -06:00
Gregory Nutt	341cbb272b	tools/configure.sh and configure.c. Update to preserve backward compatibility in usage.	2019-08-05 09:03:12 -06:00
Alin Jerpelea	31e87abd1c	Merged in alinjerpelea/nuttx (pull request #964 ) move board configs to configs folder * amber: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arduino-due: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arduino-mega: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * avr32dev1: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * axoloti: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * b-l072z-lrwan1: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * b-l475e-iot01a: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * bambino-200e: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * beaglebone-black: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * c5471evm: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * clicker2-stm32: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * cloudctrl: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * demo9s12ne64: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * dk-tm4c129x: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ea3131: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ea3152: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * eagle100: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * efm32-g8xx-stk: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * efm32gg-stk3700: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ekk-lm3s9b96: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * esp32-core: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ez80f910200kitg: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ez80f910200zco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * fire-stm32v2: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * flipnclick-pic32mz: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * flipnclick-sam3x: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k28f: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k64f: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k66f: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k125z: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * freedom-k126z: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * gapuino: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * hymini-stm32v: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * imxrt1050-evk: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * imxrt1060-evk: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * kwikstik-k40: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * launchxl-cc1310: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * launchxl-cc1312r1: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * launchxl-tms57004: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lc823450-xgevk: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lincoln60: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm3s6432-s2e: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm3s6965-ek: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm3s8962-ek: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lm4f120-launchpad: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4088-devkit: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4088-quickstart: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4330-xplorer: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4337-ws: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4357-evb: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpc4370-link2: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpcxpresso-lpc1768: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * lpcxpresso-lpc54628: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * makerlisp: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * maple: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * max32660-evsys: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mbed: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mbc1700: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mcu123-lpc214x: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * metro-m4: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * micropendous3: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mikroe-stm32f4: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mirtoo: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * misoc: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * moteino-mega: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * moxa: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ne64badge: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nr5m100-nexys4: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nrf52-generic: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ntosd-dm320: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-144: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f072rb: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f091rc: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f103rb: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f207zg: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f302r8: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f303re: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f303ze: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f334r8: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f410rb: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f446re: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-f4x1re: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-g071rb: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-h743zi: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l073rz: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l152re: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l432kc: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l452re: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l476rg: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nucleo-l496zg: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * nutiny-nuc120: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-efm32g880f128-stk: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-lpc-h3131: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-lpc1766stk: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-lpc2378: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-e407: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-h405: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-h407: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-p107: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-p207: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-stm32-p407: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimex-strp711: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * olimexino-stm32: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * omnibusf4: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * open1788: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * or1k: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * p112: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * pcduino-a10: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * photon: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * pic32mx-starterkit: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * pic32mx7mmb: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * pic32mz-starterkit: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * pnev5180b: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * qemu-i486: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sabre-6quad: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam3u-ek: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4cmp-db: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4e-ek: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4l-xplained: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4s-xplained: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sam4s-xplained-pro: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d2-xult: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d3-xplained: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d3x-ek: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sama5d4-ek: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samd20-xplained: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samd21-xplained: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * same70-xplained: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * saml21-xplained: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * samv71-xult: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * shenzhou: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sim: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * skp16c26: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * spresense: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm3210e-eval: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm3220g-eval: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm3240g-eval: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32_tiny: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32butterfly2: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f051-discovery: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f072-discovery: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f103-minimum: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f334-disco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f3discovery: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f411e-disco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f429i-disco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f4discovery: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f746-ws: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f746g-disco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32f769i-disco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l476-mdk: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l476vg-disco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32l4r9ai-disco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32ldiscovery: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * stm32vldiscovery: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sure-pic32mx: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * teensy-2.0: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * teensy-3.x: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * teensy-lc: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tm4c123g-launchpad: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tm4c1294-launchpad: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tms570ls31x-usb-kit: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * twr-k60n512: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * twr-k64f120m: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * u-blox-c027: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * ubw32: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * viewtool-stm32f107: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * us7032evb1: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * xmc4500-relax: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z16f2800100zcog: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z80sim: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z8encore000zco: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z8f64200100kit: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * zkit-arm-1769: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * zp214xpa: move board configs to configs folder This is a cleanup that will move all configs from the board folder to a board/configs folder NOTE: The configure.sh script must be used with the new path <board-name>/configs/<config-name> Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tools: configure.sh: adjust the script to use boards/configs folder Script update to pick the configs from the new configuration folder Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * tools: configure.bat: adjust the script to use boards/configs folder Now we update the script to pick the configs from the new configuration folder Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>	2019-08-05 14:30:34 +00:00
Juha Niskanen	d5382cde17	net/udp/udp_psock_sendto_buffered.c: Fixes a copy-paste error in the new SO_LINGER code: CONFIG_TCP_NOTIFIER to CONFIG_UDP_NOTIFIER.	2019-08-05 07:42:14 -06:00
Gregory Nutt	e0205ff3cc	More changes on name configs/ to boards/ in comments, Documentation, Tools, etc. That is all that I see for now.	2019-08-05 07:24:57 -06:00

1 2 3 4 5 ...

34928 Commits